White square in captured video

Every time I capture any video I get a white square in the middle of the film. These are not movie tapes but regular VCR tapes. I have many capture programs and all have the same white square.
It worked good up to a week ago.
I'am thinking take the card back to the store.
All drivers are up to date.
Win 2000, P4 Intel 2.4,ASUS p4c800MB, 1 Gig DDram 3300.
Thanks
Bob

I take it you mean the White Bar across the screen?
If so..
Our forum "Search" option brings back a lot of decent results.
Click on the icon at the top of this forum and enter "white bar" (without parenthesis), in the "Search for keyword" select match exact phrase, under "...where and how", select "Multimedia (VGA and optical drives)" don't change anything else and click on the "Search" button.
You should get at least 11 results.
some were reporting reverting to an older capture driver solved the problem. You are on your own, as I didn't take the time to see when these posts were made and/or if the older version of the capture drivers are available here.
You may have to look to a third party solution or a website, like Driverheaven or guru3D............Nvidia may help too but I do not know. Make sure you uninstall the capture driver properly before you install the other.

Similar Messages

MSI GF4-TI4800SE (VTD8X) - White Square in Captured Video?

Hello,
When i try and capture video I get a big white bar across my captured video. I have the latest drivers, and Windows Xp.... any suggestions?
Thanks
Jon M.

Our forum "Search" option brings back a lot of decent results.
Click on the icon at the top of this forum and enter "white bar" (without parenthesis), in the "Search for keyword" select match exact phrase, under "...where and how", select "Multimedia (VGA and optical drives)" don't change anything else and click on the "Search" button.
You should get at least 11 results.
some were reporting reverting to an older capture driver solved the problem. You are on your own, as I didn't take the time to see when these posts were made and/or if the older version of the capture drivers are available here.
You may have to look to a third party solution or a website, like Driverheaven or guru3D............Nvidia may help too but I do not know. Make sure you uninstall the capture driver properly before you install the other.

White band when capturing video

When capturing video I get a periodic white band covering 75% of captured video using all Sonic MyDVD, Windows Movie Maker, and ShowBiz software. I have a NVidia FX 5600 card usingWin XP home. The band lasts for 5 to 15 seconds, but is not at a regular rate and sometimes it doesnt happen at all when recording 30-60 minutes of video. Am downloading updated drivers right now but asking for further ideas.

sctbrd,
I have the exact same problem as you do with my Fx5600-vtr-128 capture card..
"jorge' does also have the same problem..Looks like it's systemic with the Nvidia card or drivers not being able to work with the WDM driver..I'll try to post a screen shot but jorge already has and I'll bet if you check his post you will find your exact bar or srtip...
Good luck,
jolphil

Flash in iWeb- a white square flashes before video loads......

hey there- i am trying to put flash into iweb. It works, using code from iWebunlimited, but there is a white box that flashes before the video loads... I've tried so many different encoders, iweb code, etc..
see it here:
http://web.me.com/misterscott
Any idea as to what is causing the white flash before the video?
thanks so much......!!
scott

i am trying to put flash into iweb
You succeeded as far as I could determine.
Anyway. The browser needs to download the files, puts them into place and render the lot.
That takes some time.
Also, every brand of browser has its way of doing that.
And black and white on a page is the largest contrast you can imagine. Use less contrasting colors.

White horizontal streak across captured video

After I capture video on my MSI g4 4200 vtc8x and I play it back I get a horizontal white streak across the middle of the captured area. It takes up 2/3 out of the middle.
Anyone having the same problems.
David

Oh for goshsakes, do I have to do all the research around here!
While sticking with one brand of tape, indeed, even one kind of tape within a brand, has been the recommended mode of operation for years, there has been commentary that changing out brands of tape very frequently is also not as bad as everyone has been lead to believe.
Why, where do I get this heresy from? Why, Adam Wilt, that's who! http://www.adamwilt.com/Tidbits.html Scroll down the page for further info.
By the way, Adam can be found penning an excellent column along with other insightful industry folk at http://provideocoalition.com/

Problem capturing video white premiere elements 8

I have download premiere elements 8 trail ver.and I have the black magic's intensity pro capture and editing card.
While I tray to capture video the premiere dose not give me the option to capture directly from the card.
It is possible to capture using black magic's software and import the fail bake to premiere.
Is there an easy way to do so. Is it possible to capture video using premiere elements 8?
with thanks
aviad

>using black magic's software and import
If you are able to create a standard DV AVI type 2 file with 16bit 48khz sound, that will import (this is for SD video)
For HD video, if that is what you are using, you will need to report back what CODEC is used with that card

Unable to capture video from VHS through DAC-200

(Running Final Cut Pro 5.1.4)
I have a DAC-200 to hook up my VCR to my G5 in order to capture video from VHS tapes into Final Cut. I had this set-up working a few months ago, but it was disconnected to rearrange equipment and now I can't get it working again. I have followed the advice from the DAC-200 installation instructions and advice from other forum topics but can't seem to get it to work. I finally was able to get something in the log and capture window besides "preview disabled" and "cannot capture because there is no video." I now can get Final Cut to capture video, however it only captures a blank black screen (and this is all I can see in the preview window).
I've triple-checked every cable hook-up, the G5 recognizes the converter box, the video tape plays fine to a tv. I've even had our IT-guy here at work come check out my set-up for help and he can't figure out what is wrong either. (He did get my log&capture window to get white fuzz in the black screen at one point though. Does that mean anything?)
Any help is greatly appreciated! (I'm happy to answer any other questions too.) Thanks!

I had difficullty with the X.4.10 plus QT7.2 and put my info on the Forum as well as sending feedback to Apple. Shortly afterwards, Apple brought out a short security update which I downloaded and, hey presto, I was then able to use QT7.2 with OSX.4.10. It may be that you missed out on the later small update to QT7.2..... ? Another factor I found was that some little while later I again had a problem so I again installed QT7.2 and over-installed FCP5.1.4 which has resolved my problems for the time being. Worth a try if you still can't get through on the DAC.
Ron.

Can't see or send photos! I just see a white image, and when I send a photo, it just sends white squares

Since last update, when I open my photos, they change to white. I can see them on the grid, but if I try to open them, they change to white. If I try to send a photo, it just sends white squares.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

White square for .swf file in dreamweaver site

Hi
Apologies if this is a very basic question.
I have built a dreamweaver site and embedded a .swf file (a
slideshow of photos created in flash) into the page.
When I view the page online, the .swf file takes a few
seconds to load, and while it is loading I get a white square where
the slideshow should be (the dreamweaver and flash documents have a
black background).
Question - how do I either
a) get the white square to be black
b) get a loading bar to show that the flash video is loading
Many thanks

Thanks so much Tom - I now have a black background!
The only problem is that my .swf is taking ages (8-10sec) to
load and now its all the same it looks like nothing is happening!
I have looked at the preloader threads and customised a
preloader, but I can work out from the search results/threads what
to do with it.
How do i link the preloader into my .swf file. Do I need to
know actionscript (I dont!) to do this? (I have Studio 8)
The other gist I picked up from the threads is its better to
avoid the preloader all together. I'm creating a photography
website - hence big .swf - but do you have any hints for optimising
the .swf - the flash publish compression is all I've used so far
Many thanks

White square when using Falsh 7.0.14.0

I use an old program about d-day and the last months of the second world war. There are maps, newspaper reports, photos and also videos on.
On the DVD disc is Flash player version 7 included. On my PC is, of course, the latest version of Flash Player. What happens now?
As soon as the program starts up I have access to all the parts. Only when I want to start a video then it will open the Flash Player but is covered by a large white surface. Only along the extreme edges you can see that there is a video below is and which also plays just under the white square. How can I get that white area get it out? Who can help me?

No problems here.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Capturing Video with FX-5900XT - Poor Quality of Image - How to improve the capture quality ?

Hello all,
I would to know what is the best sofware to use when you want to capture Video ?
I used MS Movie Maker, and WinDvd Creator but I didn't like very much of the result, the video had noise, the color and the image definition was not good, is there any way to improve it ?
I am using the last drivers from Nvidia. I generated videos in AVI format and MPEG 2.
I have old videos from my JVC VHS, my connection between my cam and the video board is a RCA Cable. When I see the video in my VCR is good but the digital result was not good.
Is there any software filter ?
Is there any tutorial or White Paper about capture using Nvidia driver ?
Thanks all for your help,
Regards,
Mario Augusto Rodrigues

I can't see a relation between a hardcopy and a analogic movie digitalization ?
Could you explain me ?
In any case the quality of the image is very good in a hardcopy.
Does the Nvidia Capture Drive have some adjust ? Sensibility ? Noise ? Color ? Sharpness ?
Regards,
Mario A. Rodrigues

Capture video straight from camera into macbook

Hi,
Is there anyway of capturing video live straight from my camera into my white macbook running FCE 4 via firewire?
Cheers
Craig

Plug in the camera, make sure it's set to shoot in 48k, select the DV converter preset. Open the log and capture window you should see the live camera in the window. Press Now and it starts capturing.

White square on lap top

I have just notice on my lap top a little white square appears on the screen in the top right corner when I am watching bt-sports . Does anyone else get this , what is it and can I get rid of it .
Solved!
Go to Solution.

From BT Site:
http://bt.custhelp.com/app/answers/detail/a_id/50455
There's a white square in the corner when I'm watching BT Sport on the app and online
You may notice a white square at the top right of the screen when watching live BT Sport channels on the app or online.
It's nothing to worry about. The graphic is there to clearly identify video streams originating from the app and website, to prevent their unlawful use.

Unable to capture video with MSI StarForce 822 GeForce 3!

I have a MSI StarForce 822 GeForce3 graphics card with 64 MB DDR SDRAM on it. I have VGA Out, as well as TV-out (AV), TV-out (S-video), and TV-in(?) (S-video).
This brings me to two questions:
First, I have NEVER been able to figure out how to use the TV-in (S-video) port. I have tried numerous programs designed to capture video, including the one that came with the graphics card, and none of them recognize the card's TV-in. Do you have any recommendations as to how to use this port to capture video?
Second, in reading through the online manual for the graphics card on the company's website (under the name G3 Pro-VT64D MS-8822), I saw that the card supposedly has the capability of "High-quality HDTV/DVD playback" (8822 v2.0.pdf, page 8 ). However, in playing back DVD's through the card's s-video output onto my HDTV-ready monitor, I definately do not see HD quality videos. Could explain why this is the case?
I have an assignment coming up where I must do some video-editing work, and thus I am posed with a situation where I need to capture video using this card (and I can't afford to buy something new for the moment).
Thanks for your help.
Charles Bergmeier

If you have the Video Capture Driver installed then the video capture program should see it. On MSI site version 1.16 of the driver is available for download.
If you still have problems (e.g. too many frames lost) you can try using Virtual VCR (worked best in my case).

Unable to capture video

I have FCP HD 4.5. I am trying to capture video from a camcorder. I can connect the camera to my iMac via the cameras DV port into the firewire port or by the camera's USB port into the computer's USB. I have tried both ways but the camera is not being recognized. The camera is a Canon Elura 80, mini DV.
I select Log and Capture and I am told it is "unable to recognize video deck." Then I try Capture Now but it says video device isn't selected. What should I do?
Thanks

You have two problems that fold into one another masking the solution.
1. an intermittant connection between your camera and the computer
2. a possible conflict between your camera and an external drive.
Lets take the problems individually.
1. An intermittant connection. If your camera is not being recognized in system profiler (before trying iMovie or FCP) you have a connection issue. Either the camera settings are wrong, the camera's firewire port is damaged, your firewire cable is flakey and/or your computer firewire port is damaged.
To test these items individually, you'll need another computer, cable and camera that you know work. If you don't have these things or have access to them, you'll probably need to take your machine to a knowledgable repair shop.
2. A conflict between the camera and the hard drive. If the camera connects reliably and shows up in system profiler, it should always work with iMovie- even with a hard drive attached. This is the very first test. If it now doesn't work when you try it in FCP with the hard drive attached, you have the firewire bus conflict. Disconnecting all external hard drives from the computer and capturing to an internal drive will solve the conflict problem.
x

White square in captured video

Similar Messages

Maybe you are looking for