White stain on the sceen of Satellite P20

From some time, I have white stain at the bottom of my screen (they are not broken pixel) and they are enlarging progressively.
Please see the pictures:
http://cide.info/temp/Photo-0067.jpg
http://cide.info/temp/Photo-0068.jpg
I have already changed the screen and the problem is still here. Does anyone knows this problem and a way to solve it. Is it the heating? I don't want to buy another screen to find myself in the same situation. Thanks

Hi
If the picture on the external display is ok so there is no malfunction with the graphic card or on the motherboard. There must be definitely something with the internal screen or the parts for example FL-inverter. But I tend to the first.
You have suggested that the screen was replaced already because of the same malfunction. I assume this is the same issue and it must be checked by technicians.
I dont think that you can fix this yourself and in my opinion the warranty should cover the replacement because it could be the same problem like first time.
Therefore contact the service guys in your country and explain the situation.
Good luck

Similar Messages

  • White Stains on the cover of MAC !!!!

    Hello!!!
    I just buyed a apple macbook pro two days ago. I was just normally cleaning with a solution (acidic i have no clue), then i started to notice white stains on the cover of my macbook. I tried everything hot water, toothpaste,another solution etc but it would not go. Am so confused i called the apple care as am in india now they told me i have to change the whole cover or lid or whatever !!!!! I just do not get it !!!! Please if anyone had the same problem plzzz help me out. i love my mac i just bought it and now this . If you know an alternate to this plzz tell me!!!!!!

    You Ruined It forget it......................keep it safe in future and to be truthfull your mac would be old one day and its normal even if u handel it with care some or the other day something is going to happen .....yours is normal but there are many others who have big problems then yours just forget it and move on and Do take CARE AND USE YOUR BRAINS AND DONT USE STUFF LIKE TOOTHPASTE OR ANYOTHER IN FUTURE...
    Clean it with gental hands and with soft cloth no liquad thing
    Rember It was a Lesson for you and for others too......
    Thnaks

  • Satellite P20 after burning the DVD is not readable

    Hi,
    All the times, after trying to write DVDs it ends with unreadable DVD. You can see that there is a burning on it, but the content can is not readable and you can not burn it anymore. I tried it with different products in R-.
    What can I do? Which different drive can I buy?

    On this forum I have found few interesting topics about ODD replacement on Satellite P20. It seems to be that TEAC DV-W22E drive is perfect for ODD replacement. It is DVD-RAM ODD and you will have DVD burner with RAM function.
    Google a little bit around and pick up info about price.

  • Satellite p20 552: Graphics problem

    Toshiba satellite p20 552 (new, out of the box)
    When set to 32 bit (color) the cursor has blue vertical stripes around it (in a square of 2x2 cm) when placed on a white surface (ex in the explorer).
    This behaviour disapears when set to 16 bit.
    The graphics card is the GeForce FX Go5700.
    Does anyone know this problem or as an answer to this?
    Thanks.
    By the way, when the pc goes in standby mode (power management or when closing the lcd panel) and when one tries to restart it, it does not swithch on the LCD screen screen, but there is some activity on the disk and the fan works. After some time it shuts down. At restart a windows error message appears.
    Message was edited by: muni

    HI Muni,
    you wrote your p20 is new ad out of the box, then you use the preinstalled Toshiba OS, don't you?
    You can try to reinstall the graphic driver (Toshiba Tools&Utilities CD or you go to https://eu.computers.toshiba-europe.com - Download Driver and choose your machine). Compare the two driver versions ad install the newer one!
    Which resolution do you use?
    Your secod problem can be solved if you check your settings in the Toshiba Power Saver. Perhaps you set it to default. If this don't solve the problem you should reinstall the Power Saver!
    Hint: You can also use the Hiberation Mode. This mode shuts the notebook down and all power is off. At the next start, the Hiberation mode loads a hdd image and you can work! It is faster than normal start up and all power is off in Hibernation mode.
    Bye chris

  • Satellite P20-771: Blue screen error message after OS reinstalling

    I have a laptop Satellite P20-771 / Pentium 4 3.40GHz (800/HTT) / XP Home/ 17' with nVidia Geo5700 driver.
    As I had some problems with software, and I reinstalled everything using the provided CDs. Unfortunately the computer keeps malfunctioning giving me blue screen errors, that are due (this comes out when I sumbit the error to Microsoft) to device drivers. I updated everything (I hope) from the Toshiba page, but I am not an expert and I am worried that I missed something or that something has not been loaded in the right order or that the setting are incorrect.
    Thank in advance for your help
    Roberto

    Hello
    I have also P20 (red one) and have never had any problem after using provided recovery media. According to your posting there must be two possible reasons for blue screen:
    1. you have installed some additional software that causes bluescreen or
    2. there is some hardware component responsible for that (new memory module or maybe some external device connected to the unit)
    Sorry but I dont see any other reason. On this way it is not easy to give precise answer and we can just speculate why this happen.

  • My ipod touch 4g, has a white spot on the screen when you turn it on, what is that and how do I fix it?

    When you turn the ipod on, there is a noticeable white spot on the screen/display. Once all the apps come on you can't see it, but when it starts up you can.

    From you descriptionis is hard to tell if it a atain on the outside of the screen or just what.  Have you tried cleaning the screeen as said in the users guide:
    Cleaning iPod touch
    Clean iPod touch immediately if it comes in contact with any contaminants that may cause stains,
    such as ink, dyes, makeup, dirt, food, oils, or lotions. To clean iPod touch, disconnect all cables and
    turn off iPod touch (press and hold the On/Off button, then slide the onscreen slider). Then use a
    soft, slightly damp, lint-free cloth. Avoid getting moisture in openings. Don’t use window cleaners,
    household cleaners, compressed air, aerosol sprays, solvents, alcohol, ammonia, or abrasives to
    clean iPod touch. Rubbing the screen with an abrasive material may scratch the glass.
    For more information about handling iPod touch, see the iPod touch Important Product Information
    Guide at www.apple.com/support/manuals/ipodtouch.

  • Is it possible to install Win XP on Satellite P20 w/o DVD drive?

    Hi, I'm new to this support forum, but I'm hoping you can help with my problem.
    Windows has become corrupt on my Satellite P20-521, yet I'm unable to use the Recovery Disc as the DVD drive has ceased functioning. I was wondering if there is any other possible method for installing the OS onto my laptop without the need for the drive. I have gotten to a stage where the harddrive is essentially formatted (due to placing the HD into another laptop and performing a windows boot that formatted and copied windows install data, however, this hasn't worked in terms of installing windows).
    Thank you in advance for any help you may provide.

    Okay, thanks for the help and suggestions guys. With the info you gave me, I managed to think out the most awkward and roundabout method possible. I've noted it down so that others may attempt to do so in the future if they so desire.
    Process to install Windows:
    Transfer HDD from Toshiba Satellite (Comp A) to Dell Latitude (Comp B)
    Copy the 'i386' folder from the Windows XP CD to a USB Memory Stick
    Use a DOS CD to boot into DOS on Comp B
    Delete all partitions and create 2gb FAT16 partition
    Format C: Drive
    Install DOS to HDD ('XCOPY A: C:\DOS' & 'SYS A: C:')
    Remove DOS CD
    Restart
    Test booting into DOS (if it doesn't work, repeat steps above or find method to remove the MBR)
    Restart
    Use 'Damn Small Linux' live CD to boot into Linux
    Mount HDA1 (Harddrive FAT16 partition) and SDA1 (USB Memory Stick)
    Transfer the 'i386' folder from SDA1 to HDA1 using File Manager
    Restart
    (Optional: Activate 'smartdrive.exe' in DOS if it's available)
    Activate 'WINNT.EXE' from within i386 folder
    Follow Windows XP Installation procedure
    (Note: somefiles may not be found when it's in the copying stage, this may be due to the version of Windows XP you copied the i386 folder from)
    Warning! Can take numerous hours to complete without 'smartdrive.exe'.
    For me, due to the only readily available disc being an 'upgraded' XP (came with lots of tools and service packs allready installed for convenience) install disc, I found files 'missing' during the file copying stage prior to actual Windows installation:
    ieframe.dll.mui
    msfeedsbs.dll
    The files are part of Internet Explorer 7, and are neither crucial to installation nor the running of Windows XP.

  • DVD-R recording/burning problem on Satellite P20

    I have a Satellite P20 notebook with a Multi Dvd-RAM drive (which should support both DVD-RAM, DVD-R and DVD/RW discs for recording). I'm experiencing some difficulties recording data to DVD-R discs - basically when I insert a blank DVD-R the D drive is not even accessable.
    I have tried recording to a DVD-RAM disc which worked fine (went through the usual procedure of turning off regular CD recording etc) so it only seems to be DVD-R's which are the problem.
    any ideas people?

    You should check if the recording function in the drive properties is enabled.
    Please check also this Toshiba document:
    http://support.toshiba-tro.de/kb0/TSB6201ED000ER01.htm
    Have found also this very useful FAQ:
    http://support.toshiba-tro.de/kb0/FAQ6701IH0004R01.htm
    Maybe it will help.

  • Satellite P20-932 shuts down because temperature is too high

    When I use my Satellite P20-932 for about 30 min, the temperature increases very quick! The laptop is turning-off automatic, without any error message.
    I try to clean ventilator on the bottom of the laptop.
    I'm really desperate.
    Please help me!

    Its a simply case of overheating.
    The notebook shuts down automatically to prevent the notebook from the damage. It seems the temperature has increased to the critical level.
    I assume the notebook is a little bit older and the cooling modules and the fans inside the notebook cannot run properly because of the dust and debris.
    The cleaning of the cooling modules is a great idea but you should be careful.
    If you have no experience, asks a technician for the professional cleanup.
    Additional you should be sure that there is enough free space around the notebook. Its important for the properly air circulation.

  • Satellite P20-S203 shuts down suddenly

    Hi,
    In the last month my Satellite P20-S203 is not behaving so well, and unfortunately it seems the problem is a hardware one (but I'm not sure, and that's why Im writing here)
    The computer just shuts down suddenly (it happened 2 or 3 times in the last 30 days); all the times it did happen I was on the web on Firefox, but I'm pretty sure it has nothing to do with that, and I'm also 99% sure it's not a virus, malware or anything like that, cause I formatted about 3 months ago, and nothing else behave in a strange way, the computer is not slow or anything like that.
    The last two options are that the issue may be of hardware nature, or of a software one (like a conflict between installed programs and the OS); I'm more for the first one, but I'm not sure and I need help to find out... What should I do?
    Also, when it suddenly shuts down, it won't turn on with the first try.
    It needs like 10 or 20 times to open, like an old car that doesn't start; the first, say, 5 times I try to turn it on, it will only display the toshiba logo.
    Then it passes through a screen I cannot read because it's too fast.
    Then to a black screen and finally it turns off again.
    With the next tries it goes a little bit more far, like it displays the windows logo, but, as that picture fades in, it stops at half of the fading process, resulting in a darker windows logo, like it's too hard for it to load the OS!!
    But then it goes off again!
    Then after some other tries it finally loads windows.
    Any help would be highly appreciated, thank you!
    OS: Windows XP SP2

    No it's ok Jayjay, I purchased this morning the right screwdriver (here in Greece these type of screws are called "French" or most internationally "torx" screws).
    So I took away the cover above the fans, unscrewed the heat sink, removed the heat sink and together with that the cpu came up. I've now removed the old thermal grease and I'm ready to put the new one.
    I like to mess around with things, I like to assemble and disassemble, I like to know how things work...but I also know, thanks to my personal experience, that there's no way not to make any damage when you mess around :) but that's ok with me, I' m used to it, as soon the pc will open once finished :D
    Anyway, I have to admit that if I worked with a little more method now everything would be ok, like making a map of the screws, knowing where to put them back, because now two screws on the back won't mount any more (precisely the F6 screws on the back panel, where the usb, vga and parallel connectors are), and two more screws are in excess (!) If someone has the time to do it, please unscrew just these two screws (the F6 on the back) and post a photo of the screws, or just tell me the height, even if I'm sure that the problem is elsewhere.
    Goodbye

  • Remove ink stains on the keyboard

    I just got my MacBook for a week. Unfortunately I left some ball pen ink stains on the white keyboard when I typed. I tried to clean it and it seemed not working. I called the Applecare, they told me to put the wrap in the boiled water and then use the hot wrap to clean it, but it did not work either. Anyone has some idea to remove the stains? Many thanks.

    It sounds like you are having a problem which is a known and acknowledged problem by Apple with some white MacBooks. Apple will replace the discolored components with new ones made from a material which is not susceptible to the same problem. They can often do it right at an Apple store. Just give them a call before hand to make sure they have the parts in stock...
    http://docs.info.apple.com/article.html?artnum=304058

  • Satellite P20: Fn+F5 and TV-button does not work

    Satellite P20, Windows XP SP2 keyboard problem.
    When I press Fn + F5, the computer does not show as earlier the different display options. TV button does not work also. I can change the different displays with my nVidia Display Driver.
    My keyboard is OK, there is no dust or fluids. I have newest BIOS update and Windows XP Service Pack 2. What program controls the keyboard functions in this case?
    How to repair this problem?

    Hello
    Obviously you have removed something or preinstalled your own operating system. Without Toshiba designed tools and utilities it will not work. I dont know exactly which of them are for doing this but please try to install Dritek Easy Button Util. /Sticky Keys V1.008, E-Keys Utilities and Toshiba Hotkey Utility.
    I hope it will help. If not please write again.

  • Satellite P20-801: Windows movie maker issues

    When I try to write a movie from movie maker to a CD I get the message 'A recordable CD drive was not detected'
    I have the Satellite P20-801.

    Hi
    According to the Microsoft information this behavior may occur if you use an HP Direct Letter Access (DLA) driver.
    Please check these sites. There you should find a whole decryption how to solve this issue.
    http://support.microsoft.com/kb/824917
    http://www.underwaterphotography.com/Video-Editing/Windows-Movie-Maker/Software/recordablecddrivenotdetected.asp
    regards

  • My Satellite P20 is very slow

    My P20 3ghz 512 ram is unbelievably slow. My old notebook with just 1 ghz laptop is 100x faster! Opening applications, switching between them, running more than one all make it crawl and crash. I've tried everything I can. Any suggestions please as I'm about to sell it!
    Mike
    [Edited by: admin on 23-Nov-05 11:13]

    Hello Mike
    Since almost two years I am owner of Satellite P20 (red one) and I am very satisfied. It is a great machine. My unit has a little bit more RAM as yours, SP2 is installed too but it runs perfectly. The start up could be a little faster but have no problems like you.
    You have mentioned that you have tried everything but did you also try to reinstall the unit with recovery CD?
    Over time, Windows loses stability. If you keep a computer for more than two years, at some point the best solution is to reinstall Windows from scratch.

  • Satellite P20 - copying CDs and DVDs

    I recently had a problem with Windows on my Toshiba Satellite P20 laptop. I ended up having to use the Toshiba recovery disk which came with the laptop and have slowly started to get things back to normal. However, I wanted to set up the facility that would allow me to copy my CDs and DVDs.
    I must have done this in the past when I bought the laptop 2 years ago but am having trouble setting it up now. If the laptop came with a CD/DVD writer would they have supplied the software as well? I can't find it on any disks at all which came with the laptop or should I assume I installed the software separately of my own device. I can't even remember what it was called.

    Hi,
    I found out that this was installed by factory defaults on some P20 models:
    Drag'n Drop CDRW Software V3.00.259
    DVD Fun STUDIO (for creating titles etc. on a DVD and for writing on DVD-R (but not on DVD-RAM or DVD-RW))
    If you have one of these models, this should also be included on the recovery disc.
    But as Jeffrey says I would also prefer burning software like Nero.
    Bye

Maybe you are looking for

  • Excel 2013 crash - related to digital signature?

    This is a cross-posting of a thread originally started in Microsoft Answers (Office- Excel) forum, advised to post in this forum by MS support engineer Mohan Suryanarayan (link to other forum: here). I have a VB macro in file A (which otherwise conta

  • LCM causes Essbase security to be overwritten and can no longer log in.

    When using LCM and migrating Foundation / Shared Services and loading it back in from the file. It somehow overwrote something with Essbase security so no user (including the admin) can log in. Through EAS or through Workspace / Planning Any suggesti

  • New user with an  massive array/string headache

    Working with a large (365 source files, 65 mxml files) SDK 3.6.0 project in FB 4.5 and continually get : Resource Path Location Description Type TB4.mxml /the0bot_1/src/the0bot/gui line 1 1067: Implicit coercion of a value of type String to an unrela

  • Vendor Evaluation in srm 4.0

    Hi Experts, I have 2 questions: 1. Does anyone have any documentation about Vendor Evaluation in SRM 4.0 that can send me   ? 2. I build new questionnaire in SRM 4.0. When I created G/R in the SRM system I got error  message "Inconsistent situation i

  • Financial Reporting - Current Period Variable

    Anybody know a quick way to get the Current Period Number (eg June = 6 ) for use in a formula? Thanks.