White stretched dsiplay and flicker on HP pavillion sleekbook 15-b142dx

Upper 1/3 of display is white and stretched out.
Then it flashes and complete display is stretched.
When connected to the HDMI port a remote display shows no problems.
Do I need a new display?
It started only when set at 60hz and worked for a few weeks at 50hz refresh rate.
Now it doesn't matter what resolution or refresh rate is selected.

Hi
Once unit is powered on keep tapping the F10 key and once unit loads to Bios check if the display appears the same if yes. Request you to call HP Technical support and get the part replaced. You may check the warranty status in the link given below.
http://h20566.www2.hp.com/portal/site/hpsc/public/wc/home?ac.admitted=1412776955380.876444892.199480...
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

Still images exported to DVD look deinterlaced and flicker on TV monitor

Hi,
I have tried tried almost everything and I still have issues with the still images exported to DVD as sequencefrom FCP 7.0 by using Compressor are deinterlaced and flicker on TV monitor. Please help remove the annoying flicker.
My FCP Timeline Sequence settings match the image resolution:
Frame Size: 1024 x 682 (double of 720 x 480 standard DVD res)
Pixel Aspect Ratio: Square
Field Dominance: None
Compressor: Photo JPG (also tried, DVCPRO-NTSC)
I cropped the original images in Photoshop to the 1024 x 682 and saved as tiffs. They still look deinterlaced in FCP timeline and exported to DVD on my iMac computer monitor.
Final output of DVD will be on this monitor:
Specifications:
Ikegami
Model: VCM-2101
Resolution: 450 TV Lines (Horizontal)
Should I crop the images to 450 horizontal pixels or the double of that 900?
How can I match the sequence or the images settings to avoid the flicker and deinterlaced look on that monitor? I am not able to test the image by having the monitor next to computer.
Compressor:
I used custom DVD settings in Compressor for 90 min best quality DVD. Tried the Porgressive and "Same as Source" in Output field.
In "Crop to" and "Padding" I set for preserve source aspect ratio and letterbox area of source.
I followed the advices from below and I still did not resolve the problem. Please is there anythign else I can try?
Thanks a lot..
Re: Poor Quality Stills
Dec 19, 2006 4:08 PM (in response to Steve Braker)
Things to try (In increasing order of image degradation)
- (in FCP) field order>none
- (in FCP or Photoshop) reduce whites by 10% - reduces overly bright areas
- (in FCP) flicker filter - minimum
- (in Photoshop) motion blur>vertical> .2 - .5 pixels - blurs vertically only
- (In FCP or Photoshop) Gaussian blur> .2 - .5 pixels -blurs both horizontally as well as vertically
- (in FCP or Photoshop) deinterlace - throws away half the image and is generally not appropriate on scanned images

Dear Russ,
Thank you very much. Yes, there is something else in the sequence, old documentary, 768 x 570 (no field dominance, 25fps, Apple ProRes 422) but the images are more imporant.
make a progressive sequence with square pixels. (I am partial to 720P, 1080 should work – or 540). Choose Pro Res 422
Do you mean that I should make a sequence in FCP with these settings? If yes, how can I set a "progressive" sequence? I dont see a setting for output field in FCP sequence settings, lnly in customizing Compressor output DVD format.
Also: "720P, 1080 should work – or 540" are you talking about Frame size? If so, to set in Compressor or in FCP?
If you have interlaced material, then de-interlace before you bring it in. If you don't have interlaced clips, don't de-interlace.
The images are not interlaced after I crop them, apply motion blur filter in Photoshop but look interlaced in FCP timeline after I import them and even to the same as photos sequence in FCP timeline.
Please help and thank you for your comments.

My MacBook was acting weird so I restarted it and when I login a white screen flashes and goes back to the login page. Help?

My MacBook was acting weird like sometimes I would log on and I wouldn't be able to type my password for a couple seconds,but it usually logged in after that. Then I left my computer open after installing the recent update after that all my applications were not responding. So I shut it down, when I turned it back on about an hour later it went to this loading screen and then to the login like usual. After I tried logging in a white screen flashed and it went back to the login/ password screen like nothing happened. Any ideas on what happened and what I can do to fix it?

Reinstall OS X;
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

What is the white horizontal line and red vertical line on my brand new ipad mini?

Bought a brand new ipad mini 2 for my sons Christmas, took it out the box and it was during the set up process, ie entering his iTunes and icloud account, a white horizontal line and a red vertical line appeared on the screen and is there all the time now. Have tried switching off and on and resetting, but it is still there. Any ideas??

Hi Tolmivooz,
So the lines didn't appear until you were into the setup?
Does the orientation of the lines change when you rotate the screen?
Thanks for trying the restart and reset. Please see if a restore helps.
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
If you see lines, missing sections, discoloration, or poor image quality
Try to restart your device. If you can't restart, reset your device.
If restarting or resetting doesn’t fix the issue, restore your device.
If you still see the issue after you restore, contact Apple Support.
Best,
Nubz

Hi, i'm new using numbers, and when I try to open a excel file don't let me do it, instead appears a box whit a error and close app, any help?

Hi, i'm new using numbers, and when I try to open a excel file don't let me do it, instead appears a box whit a error and close app, any help?

What does the error say?
A couple of thoughts: the file is corrupted or is password-protected. Corruption is more likely to cause Numbers to crash & Numbers cannot open password-protected Excel files. Try using one of the free Office clones & see what happens.

I have a mac air and it says my star up disk is full, now when I log in it just has a blank white lit screen and I cannot go further

After logging in, theres just a blank white backlit screen and I cannot go further. It also has been showing on the screen
that the startup disk is full. I already tried diagnostics and it says hardware is fine.

You will have to erase your drive because it has a corrupted directory resulting from allowing the drive to become full.
Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Th

Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Thanks

Under the Effects-Lumetri Looks-Desaturation choose a B and W effect. Then add the luma corrector from the Video effects-colour correction section. Adjust the brightness and contrast to get the effect you want.

White Balance tool and Camera Calibration Profiles

Downloaded Lightroom v4 Beta 1 for mac but the installer package failed to launch. (com.apple.installer.pagecontroller error -1.) So I've only watched the adobe tv presentations todate.
Anyway just wanted to give some feedback as a pro photographer about use of Lightroom and improvments I would like to see in the next version.
I am a commercial photographer who needs colour accuracy in photographing fashion/garment images - most of my work is reproduced on a printing press for catalogues and brochures. On average a shoot will yeild about 500 images for a client, so workflow is important as they normally want them all!
As a previous user of Capture One Pro v6 and now lightroom v3.6 - the biggest issue I have with Lightroom is the dominace of red tint when setting the white balance from a gray card reference image, shot at the same time as the images to be processed. I'm not adding anything to the images other than doing a white balance, a tweak on exposure and camera neutral setting on profiles.
To obtain a white balance setting I use the combination of an Xrite white balance card and the Q-Card and the old fasioned Kodak Gray cards all mounted on the same surface. I've used spot and ambient light readings on the gray cards to measure exposure and I've used the Adobe DNG Profiler and the Xrite colour checker profiler with the large colour checker card as a reference, (I've made profiles for sunny days, cloudy days, dual illuminant etc etc) and I'm viewing my images on a colour calibrated apple monitor.
Not withstanding all of the above the best results I get out of Lightroom are using the camera profile neutral setting! Everthing else is just too red!! even though the images do look more punchy; for accuracy of actual colour I choose the camera neutral profile.
Well when I say best results, those for colour critical garment photography and skin tones, these results are similar to those obtained from capture one pro v6.
So for the Lightroom v4 I would like to see.
1. White balance RGB values in numbers rather than percentages.
2. Add and delete a colour readouts points with a dropper tool on an image to enable more acurate colour balancing particularly in shadow areas - (already available on capture one pro and adobe photoshop)
3. Curves adjustments in all RGB channels (think you've done this)
4. Output to CMYK profiles.
5. Individual levels channel adjustment for RGB
6. Ability re-organize my tools palette (add and remove) is per Capture One and Photoshop
Regards

The legacy ACR X.x profiles are no more produced nor included for newer cameras (AFAIK, since ACR 5.1/LR 2.1). The Adobe Standard is the new default starting point for these.
While I am at it....are the Canon camera profiles I downloaded for the 1Ds MKII the same as for the 5D MKII or do I have to download different one...I suspect they are the same or Lightroom wouldn't offer them to me...is that correct?
The profiles are different for each camera model, even if they share the same name in the Calibration panel. If you can see them when developing 5DII files, it means the camera-specific profiles are installed for your particular camera model (otherwise, you wouldn't see them).

Accessing my iTunes was working great then all of a sudden most all my songs had a white box beside them resembling a white word pad and now I can't drag them into the garageband app to use

All was working fine with garageband and all of a sudden kaboom.....most all my songs now have a white box beside them resembling a white word pad and now I can't drag songs from my itunes into the garageband app but they still work in iTunes. Help please!

All was working fine with garageband and all of a sudden kaboom.....most all my songs now have a white box beside them resembling a white word pad and now I can't drag songs from my itunes into the garageband app but they still work in iTunes. Help please!

My desktop picture is stuck in the stretch mode and I can't seem to change it. How do I change it?

my desktop picture is stuck in stretch mode and I can't seem to change it. Help!!

Hewlett Packard already knew about this problem and they have also published a fix to solve the problem of wallpaper stucking on stretch mode. Download the hot fix from the ftp site here: ftp://ftp.hp.com/pub/softpaq/sp45501-46000/sp45575.exe. This package changes the Wallpaper Picture Position function from Stretched to Fill, Fit, Tile, or Center.
Source:http://forums.techarena.in/customize-desktop/1355902.htm
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

How can I find Lion to download it to my Mac Boook/ It is the white plastic model and is now running Snow Leopard. It has 4 GB of Ram but this computer is not compatible with MOuntain Lion. I cannot find Lion anywhere.

How can I find Lion to download it to my Mac Book? It has Snow Leopard and 4GB RAM but it the white plastic model and is not compatible with Mountain Lion. I have been told by the Genius Bar that it will handle Lion.

That underpowered model is better left on 10.6.8 for performance reasons, also the fact that it's dated and 10.7 will likely require you to buy alll new software to replace the PPC based software your currently using.
If you insist, then call Apple via phone and they will sell you 10.7 Lion and provide a link to download it.
My 2¢ is to save up for a new machine, as that one is about to kick the bucket, they only last about 4.5 years or so depending upon use/enviroment.
If your having problems with 10.6.8, perhaps some of the links here can assist, 10.6 is faster than 10.7 in fresh install tests.
Why is my computer slow?
..Step by Step to fix your Mac
How to erase and install Snow Leopard 10.6
How to safely defrag a Mac's hard drive
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

I have a white/grey screen and none of the suggested operations have helped, what should I do?

I have a white/grey screen and none of the suggested options have worked - I have tried all the suggestions on Apple support

Ok, I've had this problem before and contacted Applecare support and they told me that it was an issue with the RAM inside the Mac or something like that. They told me to refresh the ram, and it fixed the problem so that's what I'd recommend. Here's how to do it.
Hit Power button, then press and hold Command + R + Option + P at the same time.
This resets the residual ram that is causing the start up to hang.
Try that, I hope it works for you.
broken_mirror

I have 2010 macbook white 13 inch and need a replacement battery - where can i find the specs needed for the replacement?

I have 2010 macbook white 13 inch and need a replacement battery - where can i find the specs needed for the replacement?

The model 6,1 Late 2009 and the model 7,1 Mid 2010 use an A1331 battery. You can replace it yourself or have Apple do it for you for $129. If you need it quickly make sure you order it from a U. S. seller. Orders from China can take two or three weeks.
http://www.ebay.com/sch/i.html?_nkw=macbook++battery+a1331&_sacat=0&_odkw=macboo k++battery+a1342&_sop=12&_osacat=0
Here's installation instructions. You'll need a Tri Wing Y1 screwdriver in addition to the usual #00 Phillips screwdriver.
http://www.ifixit.com/Guide/Installing-MacBook-Unibody-Model-A1342-Battery/1667/ 1

When i turn in my computer it only come a white screen whit a map and a questionmark?

When i turn in my computer it only come a white screen whit a map and a questionmark?

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Background color changed from white to yellow and =25% changed to %% on email

I type =25% on my email and sent out, background color changed from white to yellow and =25% changed to %%.

Try leaving a space after the =
Thus: = 25%
Where and when did it change? Did it change inside Thunderbird? Did it change in the Sent folder? Or in a reply to you?
= and % are used in certain types of email encoding; =20% often appears, meaning character 0x20 which is 32 denary or the space character. It is often used where an explicit space would be illegal, and this is common in URLs and other links. I'm thinking that =25% similarly has a special meaning. It ''shouldn't'' get decoded, but software is buggy.
I can't reproduce it here, which is why I'm asking about how and when it changes. Where does the Microsoft software come into it?

White stretched dsiplay and flicker on HP pavillion sleekbook 15-b142dx

Similar Messages

Maybe you are looking for