White stripe on black printing OfficePro8500

Hi,
I was printing my greetings cards, and an white stripe appears on the black printing.
I Think that the printer have to be re calibrate, but how to do it.
Thanks and happy new year
Hubertus

It shouldn't be normal but it does happen.
I have to say that I do have a slightly brighter band across the top of the screen myself although it is even all the way across and is less than a few pixels in size. Not to mention it's lessening as time goes on. Fortunately it doesn't bother me at all as it's masked by the menu bar.
If it truly concerns you take it into a store for them to look at it else contact AppleCare.

Similar Messages

  • HELP!! MY IPOD SCREEN DIMMED WITH WHITE STRIPES AND BLACK BACKGROUND

    im wake up this morning and find out that my ipod got boot loop, it's stuck in apple logo. i try to connect it to itunes and reset it. its work, i can hear charging sounds, and unlock sounds. and also im trying to test camera and seems it worked (i can hear camera sounds) and after taking 1 picture, the camera show up  but with these stripes, but i cant access picture library. but when im looking at the screen, i just see black screen with dim white stripes in the middle. i was thinking if my screen just broke or something. but the apple logo appear good without any scratch or stripes.
    Here's the picture
    these stripe dim alternately. i only can see these two stripe
    Some one please help me about this problem. i have no idea how to fix this. sorry for my bad english

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                                              

  • A white stripe appears on the black printed by my OfficePro8​500 please help

    I was printing my Christmas card, and a white stripe appears on the black printed by my OfficePro8500, more that I print bigger will be the stripe.
    On my old Epson (forgett this brand) it was a problem of calibration, But I don't now how to correct this problem on my OfficePro
    Thanks for your help.
    &Happy New Year 
    Hubert

    Welcome to Apple Discussions
    You did not state whether you installed the update while on battery (not mains) power. You are warned not to apply certain updates without being connected to a charger & mains power.
    Also remove any attached peripherals.
    Reboot in Repair mode (command-R at start)  and use Disk Tools-Disk Utility-Disk First AId to repair your disk, and as long as you're there repair permissions. Next quit Disk Tools and reinstall the OS. After completing that successfully reboot, log in and do a combo update.
    You must have more than enough (not just enough) empty (free) disk space for the update.

  • [SOLVED] xfce+slim, suspend to RAM causes black and white strips

    I recently installed a fresh copy of Arch. When I click the "suspend to RAM" xfce button the screen turns off as it should, but when I try to resume I see 5 columns of black and white stripes (like a flattened checkerboard ). Alternatively when I click the "suspend to disk" (hibernate) button the screen turns black but the backlight is still on, the only way to get out of this state is to do a force shutdown with the button.
    I don't know if this is just an xfce problem, or if slim is also part of the problem, but it doesn't hurt to let you guys know about that as well.
    Reading about this problem somewhere else as a probably graphics driver issue, here's my graphics card:
    NVIDIA Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1)
    and I installed the Nvidia nouveau driver from here. I didn't see anything on that page about this kind of issue.
    I also tried to add "ck-launch-session dbus-launch" to my .xinitrc file, I knew it probably wasn't the solution but I wanted to try anyways. didn't work.
    I also have 2 gigs of RAM and 3 gigs in swap partition.
    What do you guys think?
    Last edited by Zonqt (2013-01-12 02:37:59)

    I have a slight newbie question that's related to my problem: after installing pm-utils am I supposed to have a file /etc/pm/config.d/modules? I reread the docs on suspend and standby here and the instructions are implying I should already have such a file, (since they say to modify it rather than create it), but I've installed and reinstalled the pm-utils and don't have any file there.
    It's kind of important too, since i'm thinking I should put my graphics driver as one of those suspended modules...
    Edit: one more interesting tid bit, when I use "pm-suspend" in the tty command line (by disabling the slim service and never going to xfce) I suspend fine. I need to have root privileges but I can just use sudo. (this is another reason why it could be a graphics card issue or I guess a privileges issue, hmm)
    Edit2: I just tried to login as root from slim and hitting the suspend button, but got the same issue. So it's likely not a privileges issue. Strange.
    Last edited by Zonqt (2013-01-11 17:10:49)

  • While using my Iphone 5, all of a sudden  black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

    While using my Iphone 5, all of a sudden  black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

    Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.

  • White fonts on black background printing with zebra printer

    Hello,
    I've created a label in Adobe forms, which should be printed with a ZEBRA 220XiIII plus.In the label there is a text that should be printed in white fonts on a black background. The problem is that when I print the label, the white text is not printed, I have only a black background. The print preview is ok, and if I print the label on a laser printer it is ok too.
    Does someone have any idea?
    Thanks.
    Benjamin

    The above code i have used is to print a Maxi code Symbol.
    [)>_1E01_1D96841706672_1D840_1D001_1D1Z12345675_1DUPSN_1D123X56_1D187_1D_1D1/1_1D10_1DN_1D_1DSALT LAKE CITY_1DUT_1E_04
    this code is in the format:
    [)>Rs Message Header
    01Gs96 Transportation Data
    Format Header
    841706672Gs Postal Code
    840Gs Country Code
    001Gs Class of Service
    1Z12345675Gs Tracking Number
    UPSNGs SCAC
    123X56Gs UPS Account Number
    187Gs Julian Day of Pickup
    Gs Place holder for
    Shipment ID Number
    1/1Gs Package n/x
    10Gs Package Weight
    NGs Address Validation
    Gs Place holder for
    SHIP TO Street Address
    SALT LAKE CITYGs SHIP TO City
    UTRs SHIP TO State
    Eot End of Transmission
    [)><RS>01<GS>96841706672<GS>840<GS>001<GS>
    1Z12345675<GS>UPSN<GS>123X56<GS>187<GS>
    <GS>1/1<GS>10<GS>N<GS><GS>SALT LAKE CITY<GS>
    UT<RS><EOT>
    My code is based on the above format that should print UPS Maxicode Symbol
         but the maxi code symbol is not geeting printed. Can you help me on this.

  • Print Inverse - White Font on Black Background (Smartform)

    Hello everyone
    I've not found a solution for my problem in SDN and also not in the internet.
    So I open a new thread.
    I would like to print a white color on a black background. I've already created a smartform with a white font and a black box.
    The preview looks good, it shows exactly what I need.
    But when I print it out only the black box appears (white font is not "printed").
    Is this a driver-problem?
    We are using HP-printers with type HPLJ4000 (SPAD).
    Thanks a lot for all answers in advance.
    Regards
    Christian

    Hello
    First, thank you for your help!
    As we had another problems with our printers, I've found the solution for this.
    It depends on the device type, which you can maintain in SPAD.
    We used "HPLJ4000" for a while and this type don't supports all background colors.
    So I changed this to "POST2" and now it runs.
    Regards
    Christian

  • Black &white stripes on the screen all the time

    Hi, I have iphone 5 white 64gb A1429, and beginning using February, and today(23.06.2013), in the morning, I saw on my iphone black & white strips on the screen, all the time in start, work, shut down, but with all sound(ringtone, sound of unlock). I created back up iphone, and restored it, without recovery and it’s problem saved. What I can doing? I have warranty, but on body have chipped.
    I'm sorry for my English

    Hello Jean
    Try out the steps in the article below to troubleshoot your iPad to get passed the screen that you are seeing.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/ts3274
    Regards,
    -Norm G

  • Black and white stripes?  Help!

    Hello!
    I confess I'm a PC user (with plans to get a Mac in the near future, if that redeems me). Therefore I'm not especially familiar with Mac and its operating system, and when a problem arises I'm pretty helpless. I work in a technology lab at my school, and one of our Macs is encountering a problem.
    The computer is perpetually displaying black and white horizontal stripes, with a spattering of multicolored pixels all over. I've tried turning the computer off and back on again (because that's about the depth of my knowledge of fixing a problem on Macs), but the computer doesn't even seem to try to boot; almost immediately after pressing the power button, I'm greeted with these hostile little black and white stripes.
    I've searched these forums trying to find a solution, but have been unable to find anything. Any help or suggestions would be sincerely appreciated!
    Thanks! =)

    To The Apple Discussion Boards!
    Which "model" & "generation" G5 iMac do you have?
    Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
    http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
    You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
    Thank you
    In the meantime try the following:
    System Preferences>Display>Color
    Click on the purple button with the black ? mark in the middle. It's located at the bottom right hand corner.
    The help window will pop up. At the very bottom of the page click on the Color Sync Utility link.
    Profile First Aid window should pop up. Follow the instructions & run the test.

  • Playbook camera shows since 4 or 5 days only from black to white stripes

    Hi,
    My playbook (bought this year in april) shows since 4 or 5 days only stripes from black to white.
    If I switch the camera or if I change to video recording, same stripes.
    When I take a picture, the result is just stripes from black to white.
    Please see attached pricture of the playbook's camera.
    I restared the Playbook already, no effect.
    Does anyone have an idea what's going on there? Is it eventually a hardware malfunction with the camera chipset? Any ideas or help is appreciated, I'm taking a lot of photos, therefore I am also willing to send it back for repar/replacement.
    Thank you very much,
    Stefan

    I am sure that this has already been dealt with on this site. Check the search box at the top to see what comes up. I think your PlayBook has to be sent back to RIM. Here is the RIM contact info for Germany. I think they have a very quick turnaround time. Backup all your data before sending it to them
    Uni Tech Centre
    Universitatsstrasse 140
    44799 Bochum
    Germany
    Bochum
    Alleestraße 165a
    44793 Bochum
    Germany
    Frankfurter Straße 63-69
    Eschborn
    Frankfurt
    Germany
    65760
    Niederkasseler Lohweg 18
    40547 Düsseldorf
    Germany
    Ubitexx
    Kustermann Office Park
    Balanstrasse 57
    Munich, Germany
    81541
    Scoreloop
    Central Tower
    Landsberger Straße 110
    Munich Germany
    80339

  • Ios8 problem. ibooks individually open up ok black print on white, but the "page" shows as dark charcoal with indistinct pale lettering and I can't read it.  Nowhere to fix the "page".  It's crap. Please help

    ios8 problem. ibooks individually open up ok black print on white, but the "page" shows as dark charcoal with indistinct pale lettering and I can't read it.  My home page picture appears to "bleed" through.   Nowhere to fix the "page".  It's crap. Please help

    I'd still prefer to keep separate user accounts. I never had any issues like this before. The only time I started having a problem was when I was just trying to force empty the trash a few months ago. I came on here looking for a solution and someone posted a way to empty the trash using the terminal. Before then, I hadn't used the terminal for anything--it was just another app in my utilities folder.  (None of this has anything to do with having separate user accounts. Plenty of people with kids make second and third user accounts on their laptops so that multiple people can use one laptop, having more than one user on a laptop is not very difficult.) But thank you, I'll try that out and see if it works!

  • Black spot and white stripe across screen

    Okay well it's my brothers ipod, and I have no idea what the heck he did to it. But he left it on his dresser and woke up with the black spot and white stripe across the screen. After reading one of the posts, is it possibily moisture or water? But I have no idea how the black blotch thingy got there. Any ideas on what it is? And how I can fix it?

    Hi,
    Is this the link you are looking for?
    http://www.apple.com/support/ipod/service/
    Regards,
    Colin R.

  • Iphone 4 screen is black and white stripes-.

    all the sudden the screen of my iphone 4 won't turn on any more.  It plays music. When I plug it to my computer it looks fine, but the screen is only black with horizontal white stripes.  Anything I could do to repair it ?

    That's a hardware failure. make an appointment at the genius bar.

  • White lines around black

    I know that some similar things have been discussed.  The only reason that Im bringing this up is that some have said that a white jagged line around a black object will not appear in print, and to check it by making a pdf out of it.  I made a pdf and the white line still shows up.  If I take this to the printer tomorrow is the white line going to print if it shows in the pdf?  or do I have nothing to fear?
    Thanks for your help!

    You can tell if it is only a preview artifact by zooming in incrementally and seeing if the white increases proportionally or of it stays abut the same thickness as you zoom in closer.
    Like this

  • White Stripes/Display Turning Off

    Last night I noticed a bunch of white stripes flicker for about a quarter of a second on my display. This happened multiple times. I shut it down with no problems.
    Today I had no problems until everything froze. I could move the mouse, but it would not change from a text cursor. I manually shut it down.
    I turned it back on, after a few minutes I had the same issue.
    I turned it off manually, unplugged the power for about a minute, plugged it back in and turned it on. After a few minutes the white stripes flickered. I decided to back up everything. After about 10 minutes, during the backup process, the screen went black. I could feel that the computer was still on, but the display was black. I manually turned it off.
    I have now been on for about 30 minutes with no problems. The computer was very hot when the display went black. Is it possible that this is an overheating problem?
    Any suggestions?

    The iBook has a seperate display dimming (display turns off) and sleep mode timers. Go into the system preferences>energy saver to set these preferences. When your display turns off you should be able to reawaken it by pressing a key on the keyboard. Turning it off is not the best solution. If the problem happens while you are still using it or it doesn't awaken when you hit a key then you may need to post here again.

Maybe you are looking for