White stripe on photos

Hi
Happe X-mas
Yesterday i discovered a problem with some of the photos I took. On some photos I get a white vertical stripe to the right on the photo. It seems like it only acures when there is alot of light in the shoot. Is this something to do with the lighting in the room? Have tried with auto and manuel. No differenc. No damage on the lens og the glas.
Have to photos to show what I mean.

It is almost on the same spot on all the photos. The top photo I have croped, cause it is a private photo.
Adding two more photos I just took.

Similar Messages

  • White flare/stripe on photos from direct light source

    I have a problem very similar to this https://talk.sonymobile.com/t5/Xperia-Z3-Z3-Dual/White-stripe-on-photos/td-p/909906 but i am not using flash. White stripe only shows when light is coming direct to camera from a light source like fluorecent lamp and from a particular angle.
    Stripe shows in both portrait and landscape mode and always at same place. I am attaching 2 photos 1 taken in landscape and other in portrait.
    I have a protecting cover but it is not covering the camera lens.
    I think other z3 devices do not have this issue as i have searched a lot but i only found 1 other person facing this issue and i have shared the link above. 
    Can i know why this stripe shows on photos? Is it a known issue? Should i claim warranty?
    landscape
    Portrait

    Few other things to check/try
    settings > apps > all > camera > clear data > restart your phone 
    also you could repair your phone with PCC which I doubt it will make any difference 
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    if nothing work contact your local Xperia Care
    http://support.sonymobile.com/global-en/contactUs/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Creative Zen Vision:M 30gb LCD Broken (full of white stripes) (picture includ

    Hi.
    So I bought my player around christmas, so it has only been used for about a month. At that time it's been on a everyday use and it has been used to watch high quality videos daily.
    So about an hour ago I took it from my jacket's (inside) pocket (I keep it there while I move because it's a loose pocket and doesnt apply that much pressure to the player as it would get in jeans' pockets.
    I put it on and to my surprise the lcd screen had white lines all over it. This really seemed weird, mainly because of it's short lifespan which it has been on my hands, it hasn't received any kind of a beating from dropping it or something like that.
    http://www.saunalahti.fi/kujap/creative_zen_vision.jpg -the picture
    (There's a creative promotional video playing. The white sharp-like thing about in the middle is a wave hitting the shore)
    I already sent an email to the shop where I purchased it telling the story and asking that what is my options at this stage.
    P.S: http://forums.afterdawn.com/thread_view.cfm/440763 this guy seemed to have the same problem.
    What do you think?Message Edited by MKujap on 0-24-200702:34 AM

    Hi.
    So I sent an email to the store and they replied that they replace the ones which have those kind of white stripes all over the screen (every second pixel is working and every second is all white) but not the ones where the glass has broke and the fluids have come out.
    I went to the store and the guy in there said that they wouldnt replace it as there was a small crack on the right lower corner of the screen and that the fluids have come out from there. You can see that little crack on the picture and there is only little (and I mean) little fluid come out of the crack. I didn't even noticed that there was any of the fluids on the screen, it just seems to be a little crack, nothing more.
    I wonder if the standard year warranty applies for this situation? (see the photos on the first post)

  • I have a white haze over photos when taking a picture with my flash

    I have a white haze over photos when taking a picture with my flash.  What can I do to fix it?

    After the ios7 update, my wife's phone began having these same issues and we assumed it was a flaw with the update.
    But  after some trial and error, we concluded it was the illumination of the  white plastic backing of the iPhone 4.  We tried a different protective  case, we blackened the apeture of the black case with a black sharpie,  none of those things worked.
    It  was noted that the white and blurry photos only occurred with a case  installed.  Without a case, the photos were perfect.  It is a *** issue.
    Since  we were using a case and appearance was not that big of an issue, I  decided to apply a strip of black electrical tape with holes punched out  for the camera and flash mechanisms and reapplied the protective case.   This tacky fix solved 95% of the white blurry look to the flash photos.
    So  a work-around is to apply a non-transparent piece of tape, or sticker  with appropiate sized holes for the camera lens and flash LED on the  back of the white plastic phone case.  It's tacky, it's a poor design  from apple, but it works.

  • My iPod touch screen went fuzzy with pink and white stripes

    Hello! I really appreciate if anyone would tell me what's wrong with my iPod touch.
    I have been using my iPod touch for less than a year, and honestly, I have quite a bad habit: I always use it for playing games. And sometimes, I even use it while it is charging. Usually it's fine, nothing went wrong, so I keep doing the same thing sometimes.
    one day, I'm visiting my relative and tried to charge my iPod. Since my iPod doesn't have an adaptor, I usually charge it using my laptop (the seller told me to charge it in a laptop/computer). One day, I borrowed my cousin's laptop to charge my iPod, but she only gave me an adaptor (not made for iPod or any apple products, but it fits so I thought it's okay). But the next day, I found out that my iPod went off by itself and I know that my battery isn't low.
    I Tried to charge it using my laptop at home, but it still went off! Also, it went normal in my laptop (the iTunes appeared automatically, as a sign that my iPod is charging). So, I tried to restore it and I worked (at least I thought so), until I saw my screen went fuzzy (pink and white stripes). So, almost everyday I turn off my iPod, turn it on again, wait for a while, then use it normally. Usually it lasts 'normal' for hours, but it will still be error as usual.
    So, my question is:
    What makes my iPod touch screen went fuzzy?
    Is it because I used it while charging?
    Is it because I charged it with an adaptor that is not made for Apple products?
    please help me, I don't know what else to do! I have restored it, I didn't download many applications like I used to before, and I left it alone when I was charging (I didn't play it while it's charging any more), and I even didn't turn on the Wi-Fi if I'm not using it (I almost NEVER turn off the Wi-Fi before my iPod touch went error)
    Thank you for answering..

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • [SOLVED] xfce+slim, suspend to RAM causes black and white strips

    I recently installed a fresh copy of Arch. When I click the "suspend to RAM" xfce button the screen turns off as it should, but when I try to resume I see 5 columns of black and white stripes (like a flattened checkerboard ). Alternatively when I click the "suspend to disk" (hibernate) button the screen turns black but the backlight is still on, the only way to get out of this state is to do a force shutdown with the button.
    I don't know if this is just an xfce problem, or if slim is also part of the problem, but it doesn't hurt to let you guys know about that as well.
    Reading about this problem somewhere else as a probably graphics driver issue, here's my graphics card:
    NVIDIA Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1)
    and I installed the Nvidia nouveau driver from here. I didn't see anything on that page about this kind of issue.
    I also tried to add "ck-launch-session dbus-launch" to my .xinitrc file, I knew it probably wasn't the solution but I wanted to try anyways. didn't work.
    I also have 2 gigs of RAM and 3 gigs in swap partition.
    What do you guys think?
    Last edited by Zonqt (2013-01-12 02:37:59)

    I have a slight newbie question that's related to my problem: after installing pm-utils am I supposed to have a file /etc/pm/config.d/modules? I reread the docs on suspend and standby here and the instructions are implying I should already have such a file, (since they say to modify it rather than create it), but I've installed and reinstalled the pm-utils and don't have any file there.
    It's kind of important too, since i'm thinking I should put my graphics driver as one of those suspended modules...
    Edit: one more interesting tid bit, when I use "pm-suspend" in the tty command line (by disabling the slim service and never going to xfce) I suspend fine. I need to have root privileges but I can just use sudo. (this is another reason why it could be a graphics card issue or I guess a privileges issue, hmm)
    Edit2: I just tried to login as root from slim and hitting the suspend button, but got the same issue. So it's likely not a privileges issue. Strange.
    Last edited by Zonqt (2013-01-11 17:10:49)

  • While using my Iphone 5, all of a sudden  black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

    While using my Iphone 5, all of a sudden  black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

    Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.

  • How to avoid white color in photo taking in iphone 4s at night with flash?

    how to avoid white color in photo taking in iphone 4s at night with flash?

    HI Lisa91,
    Here is a link to a post about the same problem you are having and the same printer. You may find the posts helpful as some were able to find a solution. Post number 6 and number 12 specifically have found solutions that worked for them. Hope this helps some.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • HELP!! MY IPOD SCREEN DIMMED WITH WHITE STRIPES AND BLACK BACKGROUND

    im wake up this morning and find out that my ipod got boot loop, it's stuck in apple logo. i try to connect it to itunes and reset it. its work, i can hear charging sounds, and unlock sounds. and also im trying to test camera and seems it worked (i can hear camera sounds) and after taking 1 picture, the camera show up  but with these stripes, but i cant access picture library. but when im looking at the screen, i just see black screen with dim white stripes in the middle. i was thinking if my screen just broke or something. but the apple logo appear good without any scratch or stripes.
    Here's the picture
    these stripe dim alternately. i only can see these two stripe
    Some one please help me about this problem. i have no idea how to fix this. sorry for my bad english

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                                              

  • White stripes in exported JPEGs

    Dear Friends,
    I use Windows XP SP 2, Indesign CS 2 (Vers. 4.0.5).
    I use the Indesign in-built jpeg export function very often because I need the output for some flash presentation (flash book).
    But the output is sometimes distorted with white stripes.
    I really hate this - because I can see these white stripes also when I work in Indesign with High Quality View Mode.
    To eliminate them I need to scroll the distorted page out of the screen and scroll it into back again.
    Then there aren't any white stripes on the screen or in the resulting jpeg-Output of this page.
    But for 100 or more pages this "solution" is not practical.
    There are workarounds like Apple- or Javascript Indesign-Macros for exporting all pages as PDFs and then converting them back to JPEG in Adobe Photoshop, for example. But the Indesign export-to-jpeg function is very simple, easy, straight-forward and fast. But these white stripes must go away.
    Is there an update for Indesign CS 2 to eliminate this problem?
    What is the reason for this really annoying problem?
    I thank you very much for your help and support!
    With best Regards

    Well - but when the exported JPEG has to be small - then Photoshop rasters the fonts very unreadable. - Indesign is better in rastering the fonts when it is exporting the stuff directly as JPEG-Files. The font is much more readable then.
    Btw.: Is there a way to setup the font-rasterizer of Adobe Photoshop to improve readability of rasterized fonts?
    Thank you for your help and support!
    With best regards

  • White stripe on black printing OfficePro8500

    Hi,
    I was printing my greetings cards, and an white stripe appears on the black printing.
    I Think that the printer have to be re calibrate, but how to do it.
    Thanks and happy new year
    Hubertus

    It shouldn't be normal but it does happen.
    I have to say that I do have a slightly brighter band across the top of the screen myself although it is even all the way across and is less than a few pixels in size. Not to mention it's lessening as time goes on. Fortunately it doesn't bother me at all as it's masked by the menu bar.
    If it truly concerns you take it into a store for them to look at it else contact AppleCare.

  • White Stripes/Display Turning Off

    Last night I noticed a bunch of white stripes flicker for about a quarter of a second on my display. This happened multiple times. I shut it down with no problems.
    Today I had no problems until everything froze. I could move the mouse, but it would not change from a text cursor. I manually shut it down.
    I turned it back on, after a few minutes I had the same issue.
    I turned it off manually, unplugged the power for about a minute, plugged it back in and turned it on. After a few minutes the white stripes flickered. I decided to back up everything. After about 10 minutes, during the backup process, the screen went black. I could feel that the computer was still on, but the display was black. I manually turned it off.
    I have now been on for about 30 minutes with no problems. The computer was very hot when the display went black. Is it possible that this is an overheating problem?
    Any suggestions?

    The iBook has a seperate display dimming (display turns off) and sleep mode timers. Go into the system preferences>energy saver to set these preferences. When your display turns off you should be able to reawaken it by pressing a key on the keyboard. Turning it off is not the best solution. If the problem happens while you are still using it or it doesn't awaken when you hit a key then you may need to post here again.

  • How can i prevent and fix white eyes in photos taken with iphone 4S

    How can i prevent and also fix white eyes in photos taken with iphone 4S?  Is there a camera app that will help prevent this?

    On the photo, click on Edit, the third icon at the bottom has a red circle with a slash over it, that's the red-eye fix. Touch that and it will fix all red eyes automatically or make you touch the red eyes and then fix them for you. Not perfect, but a great help. Now, I find that the fixes do not carry over when I save the photos in my computer. Hope to find an answer for that.

  • How to Get Rid of White Stripe At Top of Firefox Browser

    I have the current version of Firefox installed. Recently, perhaps with the most recent install, I'm not exactly sure, a white stripe appeared at the top of the browser, right under the search and URL boxes at the top of where websites would normally show, a white stripe about a 1/2 inch thick has appeared. Not on every single site, google.com works fine, but for example, it blocks out the home, connect, discover and me tabs on Twitter. Or if you go to mozilla.com, the tabs at the top of the mozilla site briefly show, then are blocked by the white bar. You can't click on any of them, even if you have your mouse pointed at the right spot. You can refresh the screen and they'll briefly show again, but not long enough for you to click on anything.
    I've run a number of search engine queries trying to find out how to get rid of this problem, but I'm only finding resolutions for webmasters, not for end users who have to deal with this problem on the other end of the browser.
    Anyone know how to get rid of this nuisance? I'm about ready to uninstall Firefox because its useless on many sites with buttons and tabs on top.

    I shut down all but one of the extensions, and that seems to have resolved the problem. Thank you!
    Now to figure out which extensions I need, and which I don't, because I don't have a clue. I don't remember installing most of these, I only recall one or two (nothing looks spammy like funmoods, but still don't remember when or why these were added...)

  • Help Please: White strips in printout using Illustrator CS5  Acrobat pro 9, and Adobe reader X

    Hallo,
    I have a big problem with printing PDF file using Illustrator CS5  Acrobat pro 9, and Adobe reader X , I get  a white strip in printout. if I convert the PDF file to JPEG I get normal printout. Thanks in advance
    OS: windows7 32 bit. 2 GB ram
    Printer: HP C6280

    Illustrator
    File > Save As > Adobe PDF

Maybe you are looking for

  • ActionTec router reboots on it's own?

    I originally posted this on Aug 4, but it seems that a whole bunch of posts from that day were lost in the maintenance that night so here goes again!  My MI424WR Rev I router several times a day just shuts down and reboots.  When it's finished reboot

  • How to enforce SCN of a datafile to the latest value?

    Hello, I try to restore old contents of my database on another server. The DB is not (and never was) in ARCHIVELOGMODE, and I have 2 cold backups of it. Neither backup set is complete (due to recycling of old tapes), but I still can restore all dataf

  • Need MacBook Pro MD103LL/A Drivers for Windows 7, Need MacBook Pro MD103LL/A Drivers for Windows 7

    Hi I have 15" MacBook Pro, Core i7 , NVidia 650 GT M. I am installing windows 7 on it now I need its drivers. I am not using boot camp because its so slow and i have waited for 6 hrs but it didnt fully download the drivers so it bothered me and I jus

  • Will Windows 10 support Multi User Pre-Boot with Bitlocker?

    Currently if you wish to follow UK Government guide lines on using Bitlocker you need to configure Bitlocker to use a minimum 7 digit startup pin. Now this would be device specific so in a business enviroment hundred's of client machines would have d

  • Problem to install OS

    I just bought a new hard drive for myself. However, I can't install the Tiger OS into the hard disk. Everytime when OS almost finishes the installation, it shows an error message telling me an error occurs during the installation, and asking me to re