White Unibody Macbook wont start...
Hey there.
So before ppl tell me to do more rearch or try resetting the smc or pram or whatever else they normally say to do... I've already tried all of it...
been looking for the past 6 months and posting here is my last option...
My MacBook just wont start.
I hit the power button.. the little indicator light on the front comes on. The fun runs at a high speed and theb I hear the hardware disc and the fun just shot off.
That's it.. nothing on the screen..
and it'll do this over and over and over again..
Sometimes after 10 minutes it'll start..
Other times more than 2 days and nothing..
It just wont turn on...
Its been 2 days and no results.
I can't put my MacBook to sleep or close the lid because THIS is what happens to it..
I can't even shut it down or restart it because this happens to it...
I'm at the end of my rope..
All my university crap is on here..
thankfully I atleast backed up my notes online..
but without this computer I'm screwed...
Help?
If you have already tried the steps you say you have above and the issue is still present, you have a hardware issue. Contact Apple using www.apple.com/support/contact if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the MacBook in to an Apple retail store or service provider to ask for an estimate.
Best of luck.
Similar Messages
-
Airport Issue After Waking From Sleep (White Unibody MacBook)
Hi all. On my new white unibody MacBook I have an Airport issue that always occurs after I wake the MacBook from sleep. I'm wondering if any of you have a similar issue and/or might not how to solve it.
Basically, when I wake the MacBook from sleep, it connects to my wireless network (and to whichever network I happen to be using at the time). A few seconds later, it will drop the connection, an exclamation mark will appear on top of the Airport icon on the menu bar, and when I click on the icon I see "Alert: No Internet Connection."
Then, if I just sit and wait, eventually Airport will connect to the network. But I have to wait -- selecting the network from the available list or turning Airport off and on doesn't help. And sometimes waiting isn't enough -- I sometimes have to go to "Create Network ..." and start all over to get a connection.
I've upgraded to 10.6.2 and the issue persists. I'd appreciate any help.
Message was edited by: Duke SpiritMy wife's Macbook has EXACTLY the same problem and I've been through dozens of suggestions trying to fix it and the problem still persists.
The problem started right after I upgraded to Snow Leopard but also installed an Airport Extreme router and WPA2 wireless encryption. I've deleted all the networks, changed the order to put the Airport as the highest preference, deleted all the keys on the keychain, ran DiskUtility, all to no avail.
I'm not sure if this is somehow related to the Airport Extreme or occurs with any router. Also, have another MacBook Pro (unibody), and it does't have this problem connecting to the same Airport Extreme.
The other factor is it is intermittent --- and doesn't always fail. Rebooting the Macbook or the router will get it to re-connect, as will shutting off and turning on the Airport several times. But that's not a solution to the problem.
Apple needs to pay attention to this as many people are now reporting the problem. -
Macbook wont start and makes ticking noise
The subject line says it all. My macbook wont start and it makes clicking noises from inside the case, kind of like a watch. The display turns on and the chime goes when it starts, but the screen stays white and nothing happens.
You can run diagnostics from the OSX disc. Insert disc one and while it is booting hold down the d key. This should take you into diagnostics.
You might also try to reset PRAM AND PMU first.
SMC/PMU Reset
http://docs.info.apple.com/article.html?artnum=303319
PRAM Reset
http://docs.info.apple.com/article.html?artnum=2238
Mort -
my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
disk utility give me this:
Process: Disk Utility [371]
Path: /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Identifier: com.apple.DiskUtility
Version: 11.5.2 (298.4)
Build Info: DiskUtility-2980400~60
Code Type: X86-64 (Native)
Parent Process: launchd [86]
Date/Time: 2013-11-05 03:29:41.247 -0500
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 9522 sec
Crashes Since Last Report: 29
Per-App Interval Since Last Report: 981 sec
Per-App Crashes Since Last Report: 25
Anonymous UUID: F6B8E263-76C8-4C7D-AA58-48134BF4BA78
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 libobjc.A.dylib 0x0000000100c62fbc _read_images + 312
1 libobjc.A.dylib 0x0000000100c79721 map_images_nolock + 1266
2 libobjc.A.dylib 0x0000000100c62761 map_images + 115
3 dyld 0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
4 dyld 0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
5 dyld 0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
6 dyld 0x00007fff5fc08f7c dlopen + 490
7 libSystem.B.dylib 0x0000000100a14e40 dlopen + 61
8 com.apple.CoreFoundation 0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
9 com.apple.CoreFoundation 0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
10 com.apple.Foundation 0x0000000101008355 _NSBundleLoadCode + 638
11 com.apple.Foundation 0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
12 com.apple.Foundation 0x000000010101960c -[NSBundle principalClass] + 38
13 com.apple.framework.DUSupport 0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
14 com.apple.framework.DUSupport 0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
15 com.apple.DiskUtility 0x0000000100006082 0x100000000 + 24706
16 com.apple.DiskUtility 0x0000000100005f59 0x100000000 + 24409
17 com.apple.AppKit 0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
18 com.apple.AppKit 0x00000001013e1f77 -[NSWindowController window] + 112
19 com.apple.AppKit 0x00000001015f61d9 -[NSWindowController showWindow:] + 47
20 com.apple.AppKit 0x00000001015c7c5c -[NSDocument showWindows] + 98
21 com.apple.AppKit 0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
22 com.apple.AppKit 0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
23 com.apple.AppKit 0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
24 com.apple.AppKit 0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
25 com.apple.AppKit 0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
26 com.apple.Foundation 0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
27 com.apple.Foundation 0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
28 com.apple.AE 0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
29 com.apple.AE 0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
30 com.apple.AE 0x0000000104d7312b aeProcessAppleEvent + 210
31 com.apple.HIToolbox 0x00000001028a0619 AEProcessAppleEvent + 48
32 com.apple.AppKit 0x00000001013fc095 _DPSNextEvent + 1191
33 com.apple.AppKit 0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
34 com.apple.AppKit 0x00000001013c168f -[NSApplication run] + 395
35 com.apple.AppKit 0x00000001013ba3b0 NSApplicationMain + 364
36 com.apple.DiskUtility 0x0000000100002009 0x100000000 + 8201
37 com.apple.DiskUtility 0x0000000100001db8 0x100000000 + 7608
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x0000000100a27c0a kevent + 10
1 libSystem.B.dylib 0x0000000100a29add _dispatch_mgr_invoke + 154
2 libSystem.B.dylib 0x0000000100a297b4 _dispatch_queue_invoke + 185
3 libSystem.B.dylib 0x0000000100a292de _dispatch_worker_thread2 + 252
4 libSystem.B.dylib 0x0000000100a28c08 _pthread_wqthread + 353
5 libSystem.B.dylib 0x0000000100a28aa5 start_wqthread + 13
AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data) -
I have a white unibody macbook 6.1 running 10.6.8 and I would like to upgrade so I can use icloud. what is my best option? as it looks like its too old to run mountain lion? thanks!
They are Safari bookmarks and Snow Leopard Safari will open in Mountain Lion, but won't give you a window?????
Here are the bookmarks, since I'm now in Snow Leopard:
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
http://ihelpyourmac.com/wordpress/?p=23
http://hints.macworld.com/article.php?story=20111014102515403
http://hints.macworld.com/article.php?story=20111014102515403
Advance warning - Mail worked fine.
I had fits with the last link I posted. At first it worked fine, then all of a sudden, it quit working. I now have iCloud - iCal syncing, but iCal is read only. Not a real big deal since you can log onto iCloud using Safari and post a new event.
I finally gave up on Address Book because it kept creating multiple contacts, which if you tried to merge or delete the multiple contacts, the contacts were deleted. It also worked at first and then stopped working as it should. -
Does apple still sell replacement A1342 batteries for the white unibody macbook
Does Apple still sell replacment replacment batteries for the white unibody macbook?
The model 6,1 Late 2009 and the model 7,1 Mid 2010 with the A1342 case use an A1331 battery. You can replace it yourself or have Apple do it for you for $129. If you need it quickly make sure you order it from a U. S. seller. Orders from China can take two or three weeks.
http://www.ebay.com/sch/i.html?_nkw=macbook++battery+a1331&_sacat=0&_odkw=macboo k++battery+a1342&_sop=12&_osacat=0
Here's installation instructions. You'll need a Tri Wing Y1 screwdriver in addition to the usual #00 Phillips screwdriver.
http://www.ifixit.com/Guide/Installing-MacBook-Unibody-Model-A1342-Battery/1667/ 1 -
My macbook wont start. it just comes to a black screen that sais no bootable device.
Ok then either the drive has failed or the cable from the drive to the logic board has failed or the drive is so corrupted that the computer doesn't see the OS on it.
Boot the computer from the original install DVD that came with your system. If your system is new and came with Lion then at startup hold down the Command+r keys and that will either boot you to the built in Recovery HD or to the internet recovery system. From either of those you can check the drive for error and or see if the computer even knows there is a drive in the system. -
Macbook wont start up, Grey screen etc
Hi, My macbook wont start up, I get the grey screen with a flashing question mark, And a clicking noise, Any idea's , Thank you in advance
Tobyhead....the symptoms you describe would indicate a dead hard drive....this tutorial should explain everything you need to know/do to replace..
http://www.macinstruct.com/node/130
Do a 'Search Discussions' here using your topic title for more posts like yours.. -
My macbook wont start up.
When I try to go into Single User Mode, I get the following error:
.Loading for kernel cache file 'System\Library\Caches\com.apple.kernelcaches\kernelcache.BB12B6EE'
Loading 'mach_kernel'...
root device uuid is 'Cd34CFB1-C240-4D09-8A79-11426561353'
Loading drivers...
Loading System\Library\Extensions.mkext
........Read Error 0x80000007
how do i fix this?Not saying you have to reinstall...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
There indeed may be something wrong with it, but we're just other users here... have you tried Apple Hardware Test? (Holding the d key down while booting from the Install Disc). -
Macbook wont start... help!
my macbook wont start it has a fully charged battery and ive tried a smc reset with no luck. any ideas???
Yeah same thing is happening to me, and im a college so i couldn't get the extended warranty, i have had this computer for 2 years, and i wanted it to last 4 years of college, but this is ridiculous, i am soo irritated right now. i spent a grand on a computer that was built by a respectable company in a state of the art facility, and i can make a computer that im posting on right now, 3 years ago, for less than 400$ and it is still running and i dont have a static free environment to work in. i will be very upset of mac doesnt help me with this
Message was edited by: jwhuffandpuff -
Macbook wont start. Panicking now
Hi, Macbook wont start up. I went thru the troubleshooting pages and the battery seems fine, adaptor seems fine. Didnt change the PRAM because I cant find the cmd button!!!! Tried to clone my HD last night using SuperDuper, would this have done something? Any ideas how to fix. Thanks in advance
That's what I was worried about. Okay, off I go. Thanks
-
How's is the new White Unibody Macbook display?
I can get a great deal on the new white unibody macbook. I was wondering how it compares to the 13 in MBP?
I am more concerned with the display. Are they equal? Or is the same display as the previous ALUM 13 Macbook?
BBI was wondering how it compares to the 13 in MBP?
FireWire is a "Must Have" for a lot of users. Spend about $175 more for the Macbook Pro, with FireWire 800/400. Then you will be "Unstoppable"!
The Firewire port is a faster way of connecting devices to your Mac, such as hard drives, video and audio equipment. A Firewire connection also allows you to boot into Target Mode, which basically turns your machine into a hard drive.
Target Mode allows users connect their Mac to another Mac, to access the files on the machine in Target Mode. You can also re-image or Install software on computers, using various Software Utilities through the use of Target Mode and Firewire.
Many peripherals are Firewire ONLY. When you have a mac (with Firewire) that will not boot it will most often still work in target disk mode making it possible to either fix the harddrive or at least back it up.
I am more concerned with the display
My advice here is to buy from someone that will let you return it if you are not happy. Some have complained of a yellow tint in various displays. -
Help - my MacBook wont start?
The led is on but the machine wont start up?
I have tryed to hold the powerbutton down and violet close, but when I try to start up, the same problem appears :-(I think you'll need to tell us a bit more: MacBook model, and what exactly happens.
For example, you're posting here under "MacBook Air" but refer to an LED... which the MBA doesn't have.
After holding down the Power button for a while (which shuts down the Mac no matter what), is that LED still on?
When you attempt to start it, can you hear the start-up gong?
Does the screen remain dark, or do you get to see at least a grey screen? If so, how far does it go before it stalls? -
My MacBook wont start: Asking me to insert booth disc
I was trying to set up my mac to back up to a new Seagate External Hard Disk and during the process, i was asked to restart the macbook. When i tried to restart, i then got a black screen: asking that i insert a booth disc? I am so lost and it wont start. I also had not even backed it up. I am scared of losing my data. Can anyone help
Hi Guys Forgive my lack of details....this is actually my first time on this forum and i am not that much of a computer guru. My system is a Mac Book Pro, bought it in 2009 and was running on OS X.
The seagate external hard disc is a 1TB "Free Agent GoFlex". It comes with it's soft ware that installs when connected for the first time. So when i connected it, it installed and then gave me the option of restarting the Mac right away or later on. So i chose to restart right away......One thing i remember is that i did not disconnect it from the Mac while restarting. So this message then comes up on a black screen "No bootable device.....insert boot disc and press any key". I was at a loss as to what to do....so i came online and posted the earlier message.
I have disconnected the Hard disc, but still the same message comes up each time i attempt to start it.
I would really appreciate any info that could help me resolve what ever the problem is.
Thanks -
My macbook WONT START PLEASE HELP!!!
this is what happened:
i put on a movie on my macbook while plugged in to my TV with VGA cable, then i turned it off, and my brother turned it on, and before it finished loading OS X turned it off from the power button, when i tried to turned it on today, my apple logo screen seems to be in a different resolution like the apple is fatter, and it just wont start OS X, but my bootcamp works fine, what can i do, is there anything i can logg in like a safe mode or something?i tried that but nothing happened, i had to reinstall Os X again good thing i had 1 week ago backups of everything on my mac
Maybe you are looking for
-
Need to send a mail from a specific From mail ID thorgh specific Mail serve
Hi, If any errors occured in my interface validation program(plsql) I need to send mail to some mail ids, But I need to use specific from mail id and mail server. I have no idea of Shell scripting, I tried it with plsql itself but not worked. My Appl
-
Shuttle Control: Keep selection after page submit
Hi @all, I tried out Carl's shuttle control.. GREAT work! Now I have a question: Is it possible to recall the page (after hitting a button) and keep the control with the selections/moves made without writing them into the database? Thank you! Best re
-
Hi Experts, While transferring delivery document from ecc to SCM, It encounters with the following error in the SCM side Field Header: Receiving Office: Location No. is a required field for the action HDR: Save Node Please help me to resolve. Than
-
Help please! Strange glitch having to click mouse multiple times to save a file
Hi, I'm having a strange issue with Adobe Illustrator CS5 when I try to save as pdf. Basically I have to click save multiple times, sometimes over 100 times before it will ultimately save. Has anyone else encountered this weird problem and if so did
-
Installing Community server on JSK_Installer11.1.1.6.1
Hi, I have installed JSK 11.1.1.6.1 on my system. Now, I need to install my community server on the same.This JSK installs only management server and community server needs both management and production. So do I need to install production on this JS