White vertical lines when printing

Hi hope someone can help me I have white vertical lines when printing photo tried doing the usual cleaning etc but still there.

Hi SandyWilkey,
It is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case. Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to resolve this issue faster.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

I have vertical lines when printing even after changing cartridges.

I have vertical lines when printing even after changing cartridges. There are no lines when copying, faxing or scanning, only printing. I have cleaned the glass, scanner and even dusted where the toner cartride slides in. Any suggestions?

Sorry but I have worked on laser printers for over 20 years and never encountered your issue. That is of course if you are explaining it correctly. When you make a copy to be printed or print a reports page from the printer or send a print job to the printer, if in all these cases you get the line, then yes the issue is either the toner cartridge or the fuser. If you make a copy to be printed and it prints without the line (Put original in adf, press copy button and print should come out), then you have one weird unit since it does not make sense since the print formatter on the unit whether making a copy or printing from the computer or unit itself uses the same hardware. Now to test if the printed copy has a line then just put a sheet of paper on top of the feed tray and do a self test from the printer. When the back edge of the paper enters the printer, quickly open the toner door to stop the printing. Remove the toner cartridge and look at the image below. If the defect is present the toner cartridge is the issue and if the image below does not have the defect, then the fuser needs to be replaced. Best I can do. Good Luck.

How can I remove vertical lines when printing from Aperture 3.2.2 to Epson Stylus Photo RX690?

I have been generally quite happy with my access to and use of Aperture 3.2.2 (recently purchased) for import and manipulation of photos and movies, etc.I am using Aperture on a MacBook Pro OSX 10.6.8.
However I have been unable to print high quality images on Epson premium glossy, glossy or matt paper on my Epson Stylus Photo RX690.
High quality prints on screen show perfectly in preview, but all prints come out with good and accurate colours, but a series of vertical lines or bands of lines across the photo print.
Using the Aperture Manual I have checked my settings in Aperture for the printer, for colour and quality of paper etc and they all seem to be correct.
The Epson Printer is networked with a Toshiba (Vista) laptop which prints perfect results from Picasa and Photoshop with fine colour and no markings.
I would appreciate any help please.
Cam Opie

Thank you Mark
I thought I had done all the settings .....but no.
I now have perfect prints. Easy when you know how!!!
Cheers
Cam

Vertical lines when printing a PDF

Software: Adobe Acrobat Standard 9.1.3.1 (German)
OS: Win XP Prof SP3
Printer: Lexmark C935
Hello Community
I have a strange problem: When user A tries to print out his building plans in PDF format on a Lexmark C935, there are vertical lines on the printout.
What I tried:
User A prints on another client: NOK
User B prints the same document: OK
Both users use the same printer with the same driver > shouldn't be a problem with the printer
User A has the same problem on another client > shouldn't be a problem with the client
Are there some user-specific settins that could cause these lines? I tried reinstalling Acrobat Standard, but it did not work...
Any comments / ideas are appreciated!
Cheers,
Simon

Try adjusuting your pdf page display settings (eg: turn off enhance thin lines).

Cm3530 colored vertical line when printing

When printing over a wireless network (entire office is wireless but printer is wired), printout have a verticle blackish, blue verticle line on the left side of every page. It does not happen when copying or scanning only printing from any PC. I have changed the ITB and transfer roller. This helps for a few days/weeks but the problem comes back. I hate to throw parts at it again, ie, formatter or DC controller but I don't know what else I should do. Anyone have any suggestions?
I have had this printer for several years and it is now out of warranty and issue has just started about a month ago. Any suggestions is greatly appreicated.

@Scificajun
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

[LaserJet Pro 200 color MFP M276nw] only vertical lines when scanning, scanner broken?

Hi all! I have a problem with the scanner in my HP all in one. If I scan (using the printer function or apples ImageCapture: same result) the output is just a lot of vertical stripes (in colors when in color mode). Not a trace of the image I try to scan. The lines are there even if i scan an empty white page. I see the stripes both when doing a preview scan and an actual scan. The problems are very similar regardless of if I use the flatbed or the feeder scanner (they are separate scanner hardware, yes?). I have updated to the latest software for the printer/scanner and I am connecting over bonjour via wireless. I am on Os X 10.9.1. Anybody having similar problems or is my scanner just plain broken? Thanks in advance!Jon

, , I understand that both of you are seeing vertical lines when scanning from your Laserjet M276nw. First, make sure the printer is plugged directly into a wall outlet and not a surge protector. Now, so I know where to begin I'd need to know the following:If you are seeing the vertical lines when you copy as well as scan?Are you seeing the vertical lines when you copy from the flatbed? The document feeder? both?If you are seeing the lines from both the flatbed and the feeder are they in the same place?Once I know this I'll be better able to assist you.

CM1312nfi: white vertical lines out of nowhere

I've been using this printer happily for the past few months without a single problem. I use this printer mainly to print full page full color images on special glossy paper that requires a higher fuser temparature so I had set up one of the paper types to use a higher fuser temperature. Quality has always been incredibly good but that ended abruptly today.
Today I printed another full page, full color image but noticed a small vertical white line at the top. It was about an inch long and my guess was it was about a single dot wide - like something scratched the print.So I printed the same image again. This time, the whole print was filled with these "scratches", most running from top to bottom and all not wider than a single dot. As these "scratches" were visible on all colors, it isn't something like a failing toner cartridge.
When I print on normal paper, I don't see these lines but since the print quality is much lower on normal paper, they might be there but perhaps I simply don't see them.
I've spent 2 hours on the phone with HP support (@ 5ct/min) but they just tell you to do the standard things, like print a Configuration Report, do a few calibrations, clean a few times, etc. In the end I was no further except that I wasted about 50 sheets of that special paper (@$1.50 per sheet!).
Since then, I've printed a few more times and although there are now less scratches than before, it's still there. If I look at the print, I have the feeling it uses less toner than normally. Also, if I print two copies of the same print, the second copy is usually a lot better than the first print (probably because the fuser has a higer temperature with the second print).
Here is a (close up) scan of a print-out with the problem:
http://www.whutever.com/privateimages/HPLines.jpg
What could be the problem? Failing fuser? Dust? Something else?
Edit: Wanted to add that the white vertical lines appear in different places each print.
Message Edited by CliffP on 04-29-2009 12:03 PM

Did you ever resolve. I am having the same issue

HP Officejet Pro 8610 bought 2 weeks ago. giving vertical lines while printing.

Dear Sir,
I bought new officejet pro8610 . 2 weeks ago. its giving vertical lines on printing any document from printer. scanner is absolutely fine just problem while printing and copying. i clear printhead few times.
i just check that when i am printing any paper from windows photo viewer,there are lines like this.
but when i copy the same image in Ms Word 2007 and print it from there. the paper is clean without lines. its strange. while i have anyother printer HP Laserjet Color CP1025 attached with same computer . i print the same image from CP1025 from Windows Photo viewer, its clean from there without lines. can any one help me out from this issue

Dear Sir,
I bought new officejet pro8610 . 2 weeks ago. its giving vertical lines on printing any document from printer. scanner is absolutely fine just problem while printing and copying. i clear printhead few times.
i just check that when i am printing any paper from windows photo viewer,there are lines like this.
but when i copy the same image in Ms Word 2007 and print it from there. the paper is clean without lines. its strange. while i have anyother printer HP Laserjet Color CP1025 attached with same computer . i print the same image from CP1025 from Windows Photo viewer, its clean from there without lines. can any one help me out from this issue

Fine white vertical lines

Sometimes of late when I start my MacBookPro fine white vertical lines appear across the monitor. A Restart typically gets rid of them. Cause? Solutions?
Thanks,
RS

It could be a bad connection, possible sign that the GPU is not feeling well. Run a Apple Hardware Test. Take it to a genius bar for a diagnostic assessment.
Ciao.

Glowing black screen during charging? White vertical lines

Hello all,
Last week i updated my pb to os 2.1 and everything went well. But now I am facing another problem. Sometimes (not always ) when I charge my pb (completely turn off) then the black screen starts glowing during charging and it keeps on glowing throughout the charging period and my pb becomes very hot. And when I turn on my pb after this then white vertical lines appear on the half portion of the screen. The screen also develops white patches but these patches and lines disappear after 5 minutes of usage.
So why is it happening? Is there any problem with my pb? Help someone
Thanks

Hi abhibharti,
Please contact our direct BlackBerry® PlayBook™ tablet support team for further investigation into this issue. You can find the contact information here: http://bbry.lv/JRKRGm
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Black screen with a thick white vertical line down the middle?

I turned my iPod touch 5 off, it was at about 10%. I turned it back on a few minutes later and there was the apple logo, as usual, but with small white writing on the black background. Then, I plugged it into my charger, and the logo and writing faded away. Instead, there then was a black screen with a thick white vertical line going down the middle, and it seems to be stuck like that. What happened and how do I fix it??
Note: My home button is stuck and does not work. Also, I never updated my iPod to iOS 7.

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode,
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

White vertical line on ipad screen

There seems to be a problem with my iPad screen.. white vertical line bar appears across the screen. It just decide to happen one day for no apparent reason (never drop it.. been well taken care of.. still looks new). As I recall.. i just did my sync with iTunes and update IOS as required. The weird thing is this problem happen soon after my iPad free warranty period expires.. hmmm i have performed sync and update before (when it was under warranty) and no problem at all after that. The screen problem happen after i performed the update IOS to 5.01 recently for the 1st time after warranty period expires.
The thing I don't understand is.. I went to the Apple Authorized Service Center at my nearest location..to get my iPad check and repaired (understand that if warranty expired, I need to pay for service & repair - no problem). The Apple service guy told me that it's hardware problem.. but Apple's support policy does not do any repair for iPad hardware problem - only replace with new unit for free (if under warranty period). If warranty period expires already.. the Apple service guy told me my options are 1) pay for a replacement unit (probably a refurbished ipad) for a price slightly below the retail price of a new iPad or 2) buy a new iPad !!
Is this the true Apple support policy ??
Annie.

If you feel you can't use it the way it is, I would go for the refurbished one. I have heard that they very good. The cost for Apple to repair your iPad would not be worth it. But seeing its out of warranty there may be other options.

White, vertical line on the screen

Hey,
I have purchased iPhone 4s 32gb. After i unboxed it and turned it on, I've noticed single, thin, white vertical line located on the screen. There is no way to remove it, tried to hard reset few times, nothing changed. I haven't dropped the phone, as I mentioned, it's a new one.Is there any way to remove the line? Or should I just exchange the phone?
Thanks for advices.

Try running the Apple Hardware Test that came with the iMac.
1) Insert the Install Disc 1 DVD that came with your computer into its optical drive.
2) Restart your Mac by either:
Selecting Restart in the Apple menu.
Pressing the Command-Control-Eject keyboard shortcut.
3) Immediately press and hold the Option key on the keyboard. This invokes the Startup Manager.
4) Release the Option key after the Startup Manager appears on your display.
5) When the wristwatch progress indicator disappears — indicating that the Startup Manager's scan for bootable volumes has completed — select the Apple Hardware Test volume.
6) Click the right-pointing arrow. Your Mac will start up from the Apple Hardware Test volume.
That should indicate exactly where the problem is. It might be bad RAM, Graphics Card, LCD Screen, etc.
Good luck.

I have a white vertical line down the right side of my internal brand new macbook pro 13" display

I have a white vertical line down the right side of my internal brand new macbook pro 13" display. I've done the following:
-Shutdown the computer, and restarted in Safe Mode by pressing the Shift key after the restart tone
-Shutdown the computer, and restarted by pressing Command, Option, P & R after the restart tone
-Checked display resolution, Best for Retina
-Hooked it up to a Dell external monitor and via projection to screen. There are no lines on the external or secondary screens
-Just curious, I ran a color utility which can not repair 4 items, maybe this is another issue.
This is a brand new Macbook Pro, just out of the box. It was fine for two days without any issues, fine last night while in use, opened it up this morning with the line.
Anyone now how I can fix this on my own?
Details atta
<Edited by Host>

If you are within the first 14 days from the date of purchase, return the MBP for a refund or an exchange. If you are after the first 14 days of the date of purchase, have the MBP repaired under the warranty provisions.
Ciao.

Remove grid lines when printing

I am trying to print a set of financial statements and do not want to see the grid lines when printing the final document. I cannot work out how to do this.
Some posts I have read say that grid lines are described as cell borders and suggest that they can be removed using the inspectors "cell borders " facility.
I have tried to do this but cannot make it happen. If I were to successfully remove the borders/grid lines then surely this would also remove the underlines I have inserted with great effort.
I would really appreciate anyone's help with this

One more time, it's useful to use our brain before stating a task.
If I read well, you used some cell borders as an underline segment.
Now you pay the result of a bad design.
You have no way to remove only borders which aren't "underlining" ones.
Next time think before and use the Underline text attribute so you will be able to remove the grid easily.
I know that some spreadsheets have two structures :
grid
borders
But, those which took time to read the User Guide know that in Numbers there is a single structure :
borders.
So, remove or hide grid means remove or hide borders.
When we work with a tool, we may ask it what it is designed to do, not what we guess it will be able to achieve.
Yvan KOENIG (VALLAURIS, France) mercredi 15 septembre 2010 20:51:51

White vertical lines when printing

Similar Messages

Maybe you are looking for