Whitebook custom bios logo
Hey all,
I bought a MS-1733 whitebook. So far I love it, have it running with 2 SSD's, core i5, and running Win7-32bit. But I am bored with the blank logo screen on boot and would like to add my own. Is this possible? I have built a bunch of PC's before, but never messed around with bios other than to set clocking settings. I know there are risks to doing such a mod., but still would like to give it a go. Is there anyone who can point me in the correct direction. I believe the 1733 uses AMI EFI (bios if you will). Any help is definitely appreciated, but please don't bother posting a message like just leave it how it is! With all due respect, that's not really constructive help. Thanks in advance!
-Pete
[Email address removed]
System info shows bios as AMI E1733ig6 ver 10a. As far as the logo... I have a version of it you can see from my website. It is currently a gif but I will redo it as a bmp or whatever it needs to be and make it the proper size and also I will make it a black background instead of gray... http://pntrservices.com/Images/logo.gif
Thanks for any help in advance!
-Pete
Similar Messages
-
Looking for Custom BIOS for Laptop *MSI GE70 Apache Pro 061* Win 8.1 64
I installed two G Skill Ripjaws 8GB 2133 Mhz Ram chips into my Apache Pro laptop. The speeds only show up as 1000 Mhz. I am trying to get a custom BIOS so I can make the necessary changes to that will allow my memory to run up to speed. Can anyone out there help me out with this? Thanks.
Thanks, Nichrome. However, the price difference between 1600 Mhz and 2133 Mhz was not much at all. I've future proofed myself if I decide to upgrade the CPU or even get a better laptop down the road. These ram sticks should at least be backwards compatible to 1600 Mhz, but still I'm not able to make it run at that speed. I'm still going to need a custom BIOS to make those changes. I appreciate the reponse, nonetheless.
-
Request custom BIOS for MS-1762 - 937-176262-072
Hello, i attempted to perform a BIOS flash with the MSIHQ tool that indicated that it was a successful flash but it still showed the current/previous E1762IG6.70O rather than the E1762IMS.10U (advised to use from Devil Tech for the GT70 0NE i have a GTX 675MX 2GB) what BIOS is compatible with my machine or do you guys recommend a custom BIOS? I did remove ac and battery for more than 5mins after flash. Many thanks much appreciated! благодаря Svet!
MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
MSIHQ: Report generated in 12/08/2013 at 0:04:41.61
Mainboard: MS-1762
PCB Version: REV:1.0
BIOS Version: E1762IG6.70O
BIOS Date: 10/08/2012
EC-FW Version: (NOT OUTPUTTED BY MSIHQ BUT SHOWN IN BIOS AS: 1762EG61 ver 5.01)what's the problem with your current BIOS?
or are you looking for latest one for your notebook?
Quote
EC-FW Version: (NOT OUTPUTTED BY MSIHQ BUT SHOWN IN BIOS AS: 1762EG61 ver 5.01)
yes reading is disabled for non supported units
Quote
but it still showed the current/previous E1762IG6.70O rather than the E1762IMS.10U (advised to use from Devil Tech for the GT70 0NE i have a GTX 675MX 2GB)
that's crossflashing, because of this it refuse to change it.
i will ask MSI later today/tonight for latest bios for your barebone unit,
and will give you if there is newer one available than your current
Quote
or do you guys recommend a custom BIOS?
this one has no connection with the question, the custom one will be based on some of official one. -
Requesting a custom bios that could maybe help with fan control (if thats even possible) or to get more power out of the notebook
idk I just clicked option 2 trying to update my bios lol, but if there are any good custom ones for the fx600 can someone point me in the right direction, thanks.fan control nope, thermal related settings yes + more.
it can be done on donation: https://forum-en.msi.com/index.php?topic=134259.0 -
What kind of enhancements does a Svet custom bios offer?
I am thinking of contracting your services Mr.Svet, but I am having a hard time finding a list of enhancements a custom bios from you is able to provide.
Could you please point me in the right direction, let me know via PM or post here.
Thank Yousent you PM, need to know full details about your system 1st
-
I own a MSI-1755 with original bios (3H?) and option VT-x is not enabled. Heard that newest bios will have option enable by default but still be blank in bios so, I was wondering if a custom bios will show this option and allow overclocking?
If that's case where can I obtain it
MSI-1755 ( i7-3630qm / 4+2GB DDR3 / Nvidia GT 645m )Quote
thanks for the reply. Are there any control options enabled in a custom bios (like ram-turbo control-igpu overclock).
they are many options that's available related to memory & igpu[intel card],
but can't say if and how they will works -
Custom bios request A6000-030US
To Svet and any others... I have a MSI A6000-030US laptop that has just left teh warranty period and I would like to take a chance at the OC'ing of the laptop and also upgrading the Intel CPU from the factory one - Core 2 Duo T6600 to either the T9600 or P8700 or any other chip that will do a better job at running multiple types of jobs/tasks, including Autocad, video editing, gaming and Dual-booting different Os'es.
there had been a listing in the past for a special bios patching in the past but for an A5000 series unit ith the Intel Celeron. I am hoping to push this laptop and just see just how far it may go, of course within its limits.
Any and all suggestions and help are greatly appreciated.
Michael C.
Atlanta,Georgiayou need custom bios to allow OC or?
-
Custom Bios for DPC Latency gone?
I have the P43 Neo and suffer from DPC Latency spikes, which is very annoying since I work with audio a lot.
However, the link to the 'custom bios' in the following topic is not available anymore:
https://forum-en.msi.com/index.php?topic=125206.0
Where can I download it?Quote
MSI custom bios can be obtained from MSI Tech. here: http://ocss.msi.com.tw/ -
Custom Bios to disable Hyperthreading on MSi gt70?
Hey I want to know if its possible to disable hyperthreading on msi gt70 with a custom bios.
http://imgur.com/rj27r8Nyes its possible
-
Custom Bios for E1761IMS.30H
Hello Svet Can you please pm me for the donation amount as well as if you can provide me with the custom bios for the following:
BIOS Information:
BIOS Version: E1761IMS.30H
BIOS Build: 11/18/2011
EC Version: 1761EMA1 Ver4.19
EC Build: 11/22/2011Is it a barabone GX740 or retail?
Go to BIOS Setup, then paste the information from "System Information" screen -
Hi Svet
Is it possible to get a Custom BIOS for the GX740, that have the hidden options unlocked e.g. HPET 32/64, and advanced settings?
Thank You in advance
Regards
AlfiIs it a barabone GX740 or retail?
Go to BIOS Setup, then paste the information from "System Information" screen -
Hello!
I would like to request a custom bios for my laptop (MSI GE-60 2oc).
I have had problems with low CPU utilization after updating the embedded controller with official MSI firmware update. At the same time I was supposed to update the BIOS, but I couldn't, using the official driver found on MSI download center, since my system told me it's not the right version.
I wanted to try this new approach as a new bios might help, I figured. I can't find any downgrading for the embedded controller. Would a custom bios be good thing for me or am I doing this all wrong?
Current bios: E16GCIMS.509
EC firmware installed: 16GCEMS1.506
The BIOS update that did not work: E16GCIMS.611I know got my current version of BIOS and EC by MSI support so I will experiment with them. Downgrading to EC v. 5.00 helped I think. I have started to meassure now and the thing is that my GPU seems to have a real low core clock. The GT750m is marketed as 967 mhz but GPU shark and 3DMark 11 shows that I have 405 mhz. When playing Starcraft 2 I get real low FPS considering the settings (25 fps while playing medium quality and 1080p res.) hard to find comparing stats on the net. When meassuring with 3Dmark 11 I get a 2800 score which is comparable to other machines like mine.
GPU Shark v0.7.3
(C)2013 Geeks3D - www.geeks3d.com
GPU Shark v.0.7.3 gives me these numbers:
Elapsed time: 00:01:40
OpenGL memory - total:2048MB, usage:98MB
GPU 1 - GeForce GT 750M
- GPU: unknown
- Bus ID: 1
- Device ID: 10DE- FE4
- Subvendor: MSI (1462-10E6)
- Driver version: 9.18.13.3182
- NV driver branch: r331_00-187
- OS: Windows 8 64-bit
- Bios version: 80.07.a2.00.07
- GPU memory size: 2048MB
- Bus width: 128-bit
- GPU memory location: GPU dedicated
- GPU memory type: GDDR5
- GPU temp: 43.0°C (min:43.0°C - max:45.0°C)
- GPU cores: 384
- Performance states: 3
- Performance state P0
- GPU: 1183.5MHz
- Mem: 2355.0MHz
- VDDC: 0.856V
- Performance state P5
- GPU: 1183.5MHz
- Mem: 800.0MHz
- VDDC: 0.850V
- Performance state P8 (current)
- GPU: 405.0MHz
- Mem: 405.0MHz
- VDDC: 0.806V
- True current clock speeds / VDDC:
- Core: 135.0MHz
- Mem: 405.0MHz
- VDDC: 0.806V
- GPU and memory usage:
- GPU: 0.0%, max: 99.0%
- GPU memory: 4.7%
- GPU memory controller: 0.0%
- Limiting policies (NVIDIA):
- no limitation
- Current active 3D applications:
---- 3dmark11.exe (PID: 6360)
---- furmark.exe (PID: 6328)
---- gpushark.exe (PID: 7028)
Well well, will try new BIOS now when I get go back to my previous version if it doesn't help me. -
Hi, can a custom bios be made for the GE620DX that can disable the "GPU Boost Technology" and force the use of the discrete nvidia GT635m instead? Also can it be modded to change the BLCK and voltages of i7-2670QM and allow changing the fan speeds? (I would like to undervolt/overclock).
Thank you
JohnQuote
that can disable the "GPU Boost Technology" and force the use of the discrete nvidia GT635m instead?
there are options to disable IGP and other kind of customizations,
however disable IGP will probably cause black screen because IGP is need to be able dedicated card to operate.
Quote
Also can it be modded to change the BLCK and voltages of i7-2670QM and allow changing the fan speeds? (I would like to undervolt/overclock).
voltage no. BLCK eventually yes, but its not guaranteed that the option will works properly.
FAN speed no, as this is controlled by EC -
Svet Custom BIOS U100 1.0e
Hi,
sorry to bother, but I am lost. I can't find the Svet custom BIOS 1.0e for my Wind U100-423US.
I'd like to have the LCtrl / FN key swap, as well as the FN+Fx combination. I am currently running the 1.0b version of this BIOS.
Can someone please point me in the right direction ?
Thank you so much,
JCEhttps://forum-en.msi.com/index.php?topic=121232.msg990166#msg990166
If I can find the file by simply browsing backwards through the thread, you can find it, too. -
Request: MSI GT70 Unlocked/Custom BIOS
svet
i have problem with my MSI GT70 laptop
this is my problem it like this case of user grimmy311 forum.notebookreview.com/msi/658595-official-msi-gt60-gt70-owners-lounge-71.html
but my ssd is vertex 4 128 gb
svet you can help me to do the custom bios for fix this problem .
Let me know if you can do it, I will provide a donation in advance.
thank you
and sorry for my bad engQuote from: jo5353 on 21-June-12, 05:14:51
now u got it donate?
Yes, i received it.
Tell me what's your current BIOS version, look in BIOS setup, system information
Maybe you are looking for
-
New player freezes with Linux+Firefox+Firebug.
Any page (or tab) playing a flash video (youtube for example) freezes firefox when closed when firebug is loaded as a module. This only applies to flash video's being played and intermittently fails to crash. This message is cross posted to the bug r
-
Skype click to call wont install in firefox
skype click to call wont install in firefox. It will install in IE11 and Chrome but not Firefox. Any ideas on how to fix?
-
Module Processor not getting executed
Hi All, I hav created a module processor in the same way as it is mentioned in the pdf https://websmp201.sap-ag.de/nw-howtoguides -> exchange infrastructure -> how to Create Modules for the J2EE Adapter Engine. But to my surprise, it is not working.I
-
Change color of vector shape in library with AS?
Hello, I am working on a project that some one else created. There were very orgainized, but my question is this: There is a starburst shape, and in the property inspector it is labeling as yellow burst, and that's how it shows in the library. But on
-
I am trying to run a report thru a web browser but the problem is instead of my client machine the report preview is displayed on the server. please help. null