Who are these discussions for? Seems like a good place for Verizon to figure out who is mad.
I need/want answers to how to STOP being treated (for the most part, there ARE exceptions). If needed how to end my contract without going through the ringer and see what other "actions" others are doing.
Thank you.
AZSALUKI,
But, they continue to tell me that i need to pay the fee, because I signed a "contract". Over the past couple of years, they have replaced phone after phone, etc. and only said sorry. In fact, I just got off the phone with them, and their offer was to ship me out another phone. That is the problem. So, THEY in fact have NOT fulfilled THEIR end of the contract. Thus, I should be able to leave WITHOUT paying them..... Correct?
Onceagain, I am looking to "the group" as to how "we" are going to handle the problem.
Oh, by the way, I did offer up another solution for them this morning. Have a person from the store come to my location (all of 2 miles), and they said "no". So, they are NOT working with me.
So, please enlighten me.
Similar Messages
-
My macbook keeps asking me to use an administrator and their password to continue but nobody seems to know who is the administrator for this computer...does anyone know how to avoid this this or figure out who the administrator is?
Lynne130,
to figure out which users have administrative privileges, open the Users & Groups pane of System Preferences; each user other than the Guest User will be shown with a description of either “Admin” or “Standard”. It’s typical for the first user created on a Mac to be an administrative user. -
What do I need to change on My iPad to download to ipod applic on ipad? It states it won't sync but seems like it does except for iTunes music.
Is this an iPod Touch app?
-
Has your debit/credit card been charged for unauthorized APPLE Itunes purchases? How do you find out who used it?
Max OSX 10.6.8, iTunes 11.1
I had a similar problem: I wanted to synch my playlist to my iphone. I like to have my playlist sorted by genre. But under each genre, albums are not sorted by the track numbers. This is a problem, especially when I am listening to club mixes when the DJ smoothly transitions from 1 track sequentially to the next one. Under the properties of each audio file, the Track Numbers and Disc Numbers are already there.
My perfect solution was to turn On Sorting - Sort Album under View>Show View Options. Then, select all the songs in that album (Shift click, Cmd click, etc) , and Edit multiple item information (Cmd I). You will see Info-Video-Sorting-Options buttons. Click on Sorting. Then, under Sort Album, Enter the name of the album. Then OK.
You should now have the playlist sorted by Genre, then each album individually sorted by track numbers. On your playlist you should see, if you scroll right, the column added called "Sort Album".
Hope this helps. -
How can I see thumbnail pictures for Videos like I can see for Jpegs
How can I see thumbnail pictures for videos like I can see for Jpegs in Elements organizer.
Thanks
BillJaYou should get the mobile version of YouTube which sends Firefox a notice to open it in the YouTube App. That will have a much better playback experience than running Flash in the browser.
-
Hi there I'm wanting 2 phones 1 for wk an a good ph for out of wk on 1 SIM card so I can finish wk put that ph down an use my good ph not call diversion , all these flash apps an you can't do this from any ph so I've been told
iPad, iOS 6.1.3why don't you post using full words, no abbreviations, and proper punctuation? Then perhaps your question will actually be legibile.
-
how do i get the phone to ring when someone calls, it seems to only vibrate and I can't figure out how to turn on the ringer
look in settings:sounds and be sure you have a ring tone set, and both vibrate buttons are off. Also be sure the volume slider id as far right as is comfortable.
-
I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team. I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where I do not have a Wi-Fi connections. I need to be able access files without going to acrobat.com. Help!!!@
Post the PDF files to a web site. The browse to them in Safari on the iPad. When you Open the files specify the Open to occur in Adobe Reader. Then you can have/Save them in your Documents folder on the iPad. An iPad has limited access to files otherwise.
-
Is there other good places for buying AE projects? Thanks!
Hi all!
Please answer - is there other good places for buying AE projects exclude VideoHive?
I'm newbie in After Effects and want buy several videologotypes for my videos.
Thanks!Google is your friend: after effects templates
Caveat emptor, there is a lot of junk out there. -
Netinfo... who are these people?
browsing through my computer, i came upon netinfo and noticed that there are all these aliases and users that aren't me. are these normal functions, or illicit?
thanks,
jamieWithout knowing the specifics of the users it's impossible to say, but the chances are that they're normal. UNIX-based operating systems run a lot of processes as special users. If you want some "light reading", you can read up on the default users in Mac OS X here:
http://developer.apple.com/internet/security/securityintro.html
Other applications and utilities may set up other users in addition to the default ones. -
They create forum accounts, ask one or more elementary questions, emphasize they are newbies (it's obvious anyway), declare their project is due for a class within hours, and top it off with a desperate plea for someone to solve their issue for them Right Now! If they'd just mark their questions solved or helpful we could rise quickly up the ladder of Lovable Know-it-all Curmudgeons.
Their handles are all similar: "name12345678". I infer they're all logging in in from the same scholastic environment or have the same book.
I also infer they possess a similar work ethic.here is a bit of brute force detective work from the premiere forum today:
users
first name + last initial + 8 digits
amandac16589591
jasonf32433264
markd33868182
johnd18932749
antonyt24775361
threads:
https://forums.adobe.com/message/7322314#7322314
https://forums.adobe.com/message/7322157#7322157
https://forums.adobe.com/message/7322158#7322158
https://forums.adobe.com/message/7322280#7322280
https://forums.adobe.com/message/7322282#7322282
we'll see if anyone 'fesses up!!!
another one:
rutha88858199
https://forums.adobe.com/message/7322379#7322379
hahahahahahahahahahaha!!! -
Are these cheap-o screen protectors any good?
I found a few screen protectors for under $4 (including shipping) but it makes me skeptical since most name brands cost over $14.
Example:
http://bensbargains.net/deal/71439/
http://dealnews.com/Apple-i-Phone-3-G-Screen-Protector-for-2-free-shipping/24065 6.html
Anyone used any of those before? How were they?I've used several cheap screen protectors in the past on older cellphones and they have worked well. They aren't as great as they claim to be, like scratch proof etc, but it did protect the screen. For instance i had a Sony Ericsoon k790a and i bought several screen protectors from ebay. THey were about $2-$4 each. In 1 year, the film was entirely scratched up, to the point where it got annoying to look at my lcd. I took it off, and the screen was still in pristine condition. Thats my experience with them, although i would prefer it to not have scratched so easily. The ones you are thinking of getting for the iphone are not much different than the ones i got for my SE. As long as you dont take a nail across the screen you should be well protected.
For the iphone, i went with what was at the store, the crystal screen protector. This is my first iphone and i wasnt used to the film and i tried to make it perfect, ruining both films in the end. I shelled out another $14 for a new pack, and got it right. Expensive, but we'll see how worth it is in the end.
Message was edited by: Ma.K832 -
I don't even know where to begin, so this looks like a good place
Hi, all
I am an RC airplane hobbiest and I would like to build a test engine stand to test my engines with different props. I would also like to tune the engines to get the peak performance out of my engines if possible. Usually to do this, I place one of my motors on a test stand with a prop and start it up and put it through its paces while listening to the sounds. Now I would like to actually quantify my results with a system that can be connected to my laptop. Of course I have no idea how to put together a data acquisition system, but why let that stop me. I thought I would pose a question here to see how much of a hassle it would be. So below I have listed all my requirements and I hope that someone can direct me to atleast giving me a direction to start picking the components that I would need to achieve my goal.
RC Glow Motor Test Stand Requirements:
1. Thrust measurement. The engines can typically produce upto 25 lbs of thrust with a proper prop configuration.
2. Temperature measurement. The engines operate at temperatures that are comparable to a typical automobile engine ( -40 F to 400 F)
3. Tachometer measurement. The engines can turn as much as 20000 RPMs. I have a optical tachometer that is suppiled from the hobby shop and works qute well with up to 4 blades on a prop.
The above are the only 3 measurements that I need to tune the motors to maximize their performance. In addition, it would be awesome if my data acquisition system wasn't tethered to a plug from a house which would be cause for an extention cord. Battery powered is the best.
Of course the final requirement is the data needs to be able to be displayed in a graph on the laptop computer.OK fair enough. It just seemed that the labview forum was just about software, and I really didn't know what breakpoint really meant. I was looking through some of the threads and the technicals in some of them are right down to the nats. I wasn't looking for anything too technical yet, I was just looking for some direction on my problem so that I can read and learn in a more focused manner for the time being. If it is feedback you would like in this forum, how about this. With all of the subcatergories for this entire forum, another one labeled Concept Evaluation would probably help with people like myself who just want to jump in and get started with a new system. It seems like everything here is broken down into several subsets, and I fear that when that occurs, the best solution may not be achieved.
As for your question, I'm by no means even qualified to answer with any technical knowledge, but I believe that the load cell for force measurements and the thermocoupler for the temperature measurements would be a voltage measurement, and the RPM would be a digital pulse measurement.
Thanks for your reply, and I will now try the same thing in the breakpoint forum. -
URGENT. Good place for Macbook repairs?
My Macbook hard drive has failed. When I try starting it up, it doesn't go past a white screen with a "no trespassing" symbol on it. I have tried using the reinstall disks but nothing happens and the disks just get stuck. The data may or may not be recoverable.
The Genius Bar could not handle my case, so they recommended me to Tekserve.
I went to Tekserve and they told me they would try to get the desired data off and place it onto an external hard drive. However, they said that if they got everything off that I wanted, then the charge would be something over $800. Also, they asked me what specific data I wanted off (and I would ideally want everything off). Based on ratings (e.g. google map ratings - search for "tekserve nyc"), I figured that this might not be the best place to go.
So, +*for those who have needed something repaired on a Macbook, particularly regarding failed hard drives, what places would you recommend*+ (preferably describe just how successful the operation was, and around how much it cost)?
Thank you very much for your help.funky_pat wrote:
Thanks for the replies.
For a wrap-up to this thread, does anyone know how data recovery works exactly?
Any number of different things. The simplest is to use heavy-duty drive recovery software. Worst-case scenario is that some drive hardware is so bad that it has to be taken apart in a clean room and the drive rebuilt.
To narrow this question down, I'm wondering specifically about two things:
(1) Why can't they just automatically get all of my data off, instead of asking me what specific data I want off?
Part of the problem would be that failed hard drives may only last so long before they completely go and/or the amount of time it takes to do this costs a lot of money/time. You could have crashed hard drive where the data can't be completely recovered. If it's in bad shape, there's a good chance that recovery efforts are destructive to the drive data in the long run. You're really looking at getting the most important stuff off the failed drive before it completely dies.
(2) How secure is my data (can I trust that they won't be opening files, or even looking at file names that may suggest important private information?)?
You could do some research on it. There's the off chance that you private information is snooped, but if it's that important to you, what choice do you have? -
Good place for javascript? "Inline Popup" Examples?
This is what I want but I don't know what to call it:
I want a sort of inline popup; it should be a box that
appears inside a
cell or div and pushes the contents below it down.
Preferably, I'd like
it to stay for, perhaps, 20 seconds and then disappear again.
First, what would something like this be called and second,
anyone have
a good link or easy solution?
ThanksSticky Note script- © Dynamic Drive DHTML code library
(www.dynamicdrive.com)
"Art" <lee_*[email protected]> wrote in
message
news:g17bs9$pp0$[email protected]..
>
> This is what I want but I don't know what to call it:
>
> I want a sort of inline popup; it should be a box that
appears inside a
> cell or div and pushes the contents below it down.
Preferably, I'd like it
> to stay for, perhaps, 20 seconds and then disappear
again.
>
> First, what would something like this be called and
second, anyone have a
> good link or easy solution?
>
> Thanks
>
Maybe you are looking for
-
No internet in wifi environment?
I bought lately the new Ipad 3. Everything at home works fine, but when I go elsewhere (where there is Wifi), I get no connection with the internet. What is wrong or what should I change?
-
McAfee ANTI VIRUS PROGRAM THROUGH VERIZON
Hello Everyone! I have been with Verizon since "the beginning of time". I signed up for the Broadband Essentials as soon as they were offered. I have been experiencing technical difficulties for some time now. I took my computer to Best Buy to ha
-
Create Transaction for web-dynpro ABAP
hi Can you help me in creating a transaction for web-dynpro ABAP. thank you.
-
Any way to migrates Notes from one iPhone to another
Is there any way to migrates Notes from one iPhone to another without backup restore?
-
Thankyou