Who can help me out with my built-in iSight issue?

Okay, so I have a question regarding my built-in iSight.
Now, I know... This question may have been asked before but I just can't find it, I guess it got lost in the mass.
If you would be friendly enough to forward me the message or instruct me on what I need to do to solve this, that would be a great help.
Also, I'd like to know if I have to reset anything will I lose everything on my Mac? Should I make an external backup?
So basically the issue is that whenever I turn on Photo Booth the only thing I get is a black screen.
The program will let me take a picture, but when I want to see a preview of the image, it's not there.
I then tried to use my iSight with iChat, which worked perfectly fine. After that I did the same with Skype,
but Skype didn't let me see anything but black as well.
Can anyone help me please?? Is this an issue that can be fixed myself or should I bring it to the Apple Store?
As this is a very important matter to me, because my parents are moving out of the country soon and I would like
to keep in touch through Skype, I would really appreciate all the help!!!
Thank you in advance guys!

abegail.gielen wrote: ... this is a very important matter to me, because my parents are moving out of the country soon and I would like to keep in touch through Skype...
You have a software problem that will require troubleshooting. With your parents moving soon, I understand your concern.
Because you have been unable to correct the problem using the suggestions that are already posted in iSight discussions, I suggest you make an external backup and then take your Mac to the Apple Store for service.
If you like, the Apple Store may even be able to suggest training that will allow you to troubleshoot and fix future occurrences on your own.
Message was edited by: EZ Jim
Mac OSX 10.8.2

Similar Messages

I upgrade to Lion and now my Mail does not open, who can help me out?!

I upgrade to Lion and now my Mail does not open, who can help me out?!

I cannot get to the mail menu bar. When I try to open mail, I get "you can't use this version of mail with this version of Mac OS X. But the help suggestions don't work either. I am trying to download an update combo v1.1 to see if that helps. Thanks

I have several issues that I hope you can help me out with. I am a professional photographer with a Mac with OS X 10.9.4: - I can only make ONE contact sheet in CS6 (from AUTOMATE) from pictures indicated in Bridge. If I want to make another contact sheet

I have several issues that I hope you can help me out with. I am a professional photographer with a Mac with OS X 10.9.4:
- I can only make ONE contact sheet in CS6 (from AUTOMATE) from pictures indicated in Bridge. If I want to make another contact sheet I need to shut down and restart CS6.
- Camera RAW: if I change any setting in Camera RAW (except exposure), having first optimized the exposure, the exposure will automatically return to zero. Sometimes when I've set exposure and cropped the picture in Camera RAW Plug-In, the effects are lost just by opening the picture in CS6.
- Sometimes if I crop a picture in Camera RAW, it may be impossible to open it again from Bridge!
- I cannot do lens corrections in Camera RAW, at all. The Camera RAW comment is that "it cannot load the correct lens type". Why?

Are you writing that when you select a large number of images in the bridge like a hundred thumbnails when you then use Bridge menu Tools>Photoshop>Contact Sheet II that Photoshop only produces a single contact sheet for the first few thumbnails and fails to produce additional contact sheets for the other selected thumbnails? Photoshop contact sheet II script should create as many contact sheet as needed for the numbers of thumbnails selected. Perhaps the script is hung or you have exhausted your machine resources.
ACR Crop tool does not crop the RAW file it records crop settings to be used during the conversion process. Camera RAW DATA is not altered. The only changes made to RAW Files is ACR Metadata may be added. Anything you do in ACR can be un-done in ACR. If you can not open a RAW File in ACR the Files is either corrupt or from a new camera ACR does not support yet. ACR should not corrupt RAW files.
If you do not have a lens profile for ACR I think you should still be able to do lens correction manually in ACR.
Some of what you write I don't follow could you post some screen captures of your problems often a picture helps.

Who can help me deal with the question?

My JSP platform is JDK1.3+RESIN1.1.5,whern i write these code ,i found something wrong!
<%@ page contentType="text/html;charset=gb2312"%>
<%@ page info="database handler"%>
<%@ page import="java.lang.*"%>
<%@ page import="java.awt.*"%>
<%@ page import="com.caucho.sql.*"%>
<%@ page import="java.io.*"%>
<%@ page import="java.util.*"%>
<%@ page import="java.sql.*"%>
<%@ page import="javax.servlet.*"%>
<%@ page import="javax.servlet.http.*"%>
<%! String username;%>
<%! String password;%>
<%! String sql;%>
<%
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
String url="jdbc:odbc:jsptest";
Connection conn=DriverManager.getConnection(url,"sa","hulachen");
Statement stmt=conn.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE,ResultSet.CONCUR_READ_ONLY);
String username=request.getParameter("username");
String password=request.getParameter("password");
sql="select * from tbl_accounts where username='"+username+"' and password='"+password+"'";
ResultSet rs=stmt.executeQuery(sql);
while (rs.next())
String name=rs.getString("username");
out.print(name);
if (name==null)
out.print("error");
else
out.print("welcome");
%>
whether the name is null or not ,it will print error,i don't know why,who can help me?Thanks!

I did the same as you said,but the same thing happened!
the code is:
while (rs.next())
String name=rs.getString("username");
out.print(name);
if (name==null)
out.print("True");
else
out.print("False");
If the name is null,it printed False,but if the name is nothing,it didn't print True,but nothing!

Just updated my iPad with iOS 7.0.3. my iPad music downloads are messed-up, the regular album tracklist is disorganised...can't get them "back on track" who can help me out? Greets Alex

Just updated my iPad with iOS 7.0.3 > my iTunes music downloads are messed up....the regular tracklist of the albums are in chaos, can someone help me out to get them " in line" again!?

Well I basically answered my own question. I just ended up deleteing the tracks from the albums missing artwork (I highlighted all of them and right clicked delete) then just dragged over the album again that had the artwork already set and it worked like a charm.
Couldn't figure out any other way to do it. Still open to ideas for the future if anyone has any.

Regarding the wireless problem of my T60. Hope there is someone who can help me out. Thx.

I have read some of the posts and i found out that some of the Thinkpad users have the problem of unable to connect wireless network using Access Connection but not Window wireless network connection. For my case, i have connect the network with both of them. In fact, when i use either one to connect, the other would be connected too.
The problem is, sometimes when i use my wireless network, my wireless would be switched off automatically, and the wireless light is then off, and after that i cannot switched the wireless on again. I tried on it using access connection, failed. I tried Fn+F5 to on it, but no matter how many times i click on 'on', there would not be any response. The only thing i can do after this is to restart to laptop.
I called Lenovo Support to help me solve the problem, but still failed. The first time they asked me to installed some drivers and reinstall my Intel(R) Pro/Wireless 3945ABG Network Connection. These files included 79uj29us which is a bios update, 7kwc50ww which is the wireless driver installation, 7tvu12ww which is the hotkey driver update, and last 7tku03ww, a power management driver update. But the problem remains. The 2nd time i called, they asked me to uninstall my Access Connection and use window wireless connection as they may cause conflict to each other, and they asked me to uncheck the option of 'Allow this computer to turn off this device to save power' in the power management of wireless drive in device manager, but problem persists. The last time i called the technician and he said they only can check if it is a hardware problem and there most probably be nothing else they can do for my softwares and drivers, and he also believed that it might be the network configuration of my service provider that cause the problem, but i personally do not think so as it is quite hard to believe that the my service is switching off my wireless hardware and i have other laptop in my house too but they do not experience this problem.
Last night i discovered something new, when the wireless is off automatically again, i ran a test on the the wireless device using PC Doctor, for PCI express status test, it passed, for the wireless connectivity and signal strength test, results showed there was 'no connection', when it comes to network link test, it showed 'internal error', the TCP/IP network connection test showed failed. Then i restarted it and ran the test with the wireless switched off by my self, the PCI express status test passed too, but the remaining four test all showed 'no connection'.
I really hope if there is someone there to help me out to solve the problem or to enlighten me what the real problem is, could it be software or hardware problem, or could it be other problems like registry or what? I greatly appreciate if anyone can help me to solve this. Thanks alot.
Message Edited by cat_felix on 06-13-2008 09:54 PM
Message Edited by cat_felix on 06-13-2008 09:55 PM
Message Edited by cat_felix on 06-14-2008 04:15 AM

I have uninstalled my Access Connection, but this problem seems to persist. IBM technician have changed the wireless card of my T60, the first few days after it was changed was very fine, no problem at all. About a week later, the problem occured again, and it happened quite frequently after that occurence. Now i really have no idea what is the cause and how to solve it. Will be greatful if there is anyone that can help me.

Is there anyone who can help me out in shopping cart creation by FM?????

Hi Guys,
I am trying to create a Shopping cart in SRM system executing the RFC from External system.I am trying hard to solve this issue since last 1 months and still i am not able to do that.plz help me out its very urgent now.
I am trying to use BBP_PD_SC_CREATE in combination with BBP_PD_SC_SAVE and Commit.
Here Below i am mentioning what all fields i using to pass the data, and what all errors i am getting after executing the function Module.
Please check it and tell me where exactly i am doing mistake.
FM ---> BBP_PD_SC_CREATE
I_REF_GUID 00000000000000000000000000000000
I_PARK X
I_SAVE X
I_HEADER
GUID 00000000000000
DESCRIPTION TEST
CURRENCY USD
PROCESS_TYPE SHC
I_ITEM
GUID 00000000000000000000000000000000
PARENT 00000000000000000000000000000000
NUMBER_INT 0000000001
NUMBER_EXT 0000000000
PRODUCT 00000000000000000000000000000000
DESCRIPTION MONITOR
CATEGORY 00000000000000000000000000000000
CATEGORY_ID 65.10
QUANTITY 1.000
UNIT EA
PRICE 1.00
PRICE_UNIT 1
GROSS_PRICE 1.00
CATALOG_PRICE 0.00
CURRENCY USD
PRODUCT_TYPE 01
LOGSYS_FI CFG300
BE_LOG_SYSTEM CFG300
BE_PLANT BUS1
BE_MOVE_REAS 0000
BE_PUR_GROUP W01
BE_PUR_ORG IBRD
BE_CO_CODE IBRD
BE_DOC_TYPE ECPO
BE_PACKNO 00000000
BE_INTROW 00000000
BE_PO_PRICE 1
I_ACCOUNT
GUID 00000000000000000000000000000000
P_GUID 00000000000000000000000000000000
DISTR_PERC 100.00
ACC_NO 0001
ACC_CAT CC
SRC_GUID 00000000000000000000000000000000
G_L_ACCT 500411060
BUS_AREA VTRS
COST_CTR 6589
SDOC_ITEM 000000
SCHED_LINE 0000
CO_AREA WBG1
PROF_SEGM 0000000000
CMMT_ITEM 500411060
FUNDS_CTR 6589
FUND BB
I_PARTNER
PARTNER_GUID 000000000000000000000000
P_GUID 000000000000000000000000
PARTNER_FCT 00000039
PARTNER_NO
ADDR_TYPE 1
ADDR_ORIGIN A
ADDR_NO 10735
PARTNER_ID 1058
same like i have passed 3 more partner details.
I_ORGDATA
GUID 0000000000000000000000000
P_GUID 0000000000000000000000000
PROC_ORG_RESP_ID 50000641
PROC_ORG_ID 50000640
PROC_GROUP_ID 50000641
When i execute it, i am getting error like
"Interface Data Contains error"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDDYN"
"Incorrect Interface Data for set PDFRT"
"Incorrect Interface Data for set PDHCF"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDORG"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDTAX"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDTOL"
"Incorrect Interface Data for set PDWGT"
"Enter Atleast one item for one limit"
Thanks alot.
GRTZ.
Regards,
Manoj Tiwari

Hi,
before I would try to save a SC to the database, I would check how I have to fill the interface. Therefore I would suggest to read at first a SC from the database with FM BBP_PD_SC_getdetail. With this example of an existing SC you should be able to will the interface correctly.
E.g. when you check an existing SC with FM BBP_PD_SC_getdetail you see that some parameters are missing in your I_ORGDATA part. The I_ORGDATA part of my SC example looks like the following:
PROC_ORG_RESP_OT               O
PROC_ORG_RESP_ID               92001699
PROC_ORG_OT                    O
PROC_ORG_ID                    92000053
PROC_GROUP_OT                  O
PROC_GROUP_ID                  92001699
Here you can see that you forgot the whole *OT parts! In your case the system doesn't know that you mean an orgunit.
As I mentioned above, when you know how a SC looks like on the database, it should be easy to fill the FM interface.
Best regards
Dennis

Is there anyone who can help me out in this!!!!

Trying this for the fourth time........
Hi gurus,
I have posted this thread earlier also but didnt get any response, so I was just wondering did I ask something unrealistic?
Hi gurus,
I am working on an interface where I will be getting the production order number and then based on this order number I need to update some fields in transaction code ... CO11N...such as Quantity produced, reason of variance, batch number and posting date. So what I believe is first I need to pass the order number to the BAPI_PRODORD_GET_DETAIL to get the details of the production order and then update the production order by using the BAPI_PRODORDCONF_CREATE_TT, but my problem is I am new to ABAP I got to know what should be the process but I am not being able to implement it. So basically the program needs to pick the data from the internal table and copy it in SAP. My internal table looks liks
data : BEGIN OF it_input occurs 0,
order_no like afko-aufnr, "Order Number
opr_no like afru-vornr,
quant like afru-lmnga,
varian like afru-grund,
budat(10) type c,
matnr like caufvd-matnr, "Materials
erfmg like cowb_comp-/cwm/erfmg,
charg like mcha-charg,
END OF it_input.
So can you please help me out in this..I mean step by step or if there is any other suitable way.
Thanks,
Rajeev .......

Rajeev,
Based on your post, just may not be clear what you are asking for then.
I think your general approach that you have described is correct. Without knowing the source of your data for the internal table, it is hard to completely provide an answer but a typical interface might look something like this:
1. Selection screen with parameters for the file name (If a file is the source of your data)
2. Load data from the file into your internal table.
3. Loop at your data
4. Call the Get Detail BAPI
5. Using the data returned from the get detail BAPI and your internal table create the importing, exporting, tables parameter for your Create BAPI.
This step might need some more clarification. I am not sure if you are using the right BAPI for what you are trying to accomplish. First this appears to be a Create function and not a change, second, it appears that this is for Time Ticket information against a production order. I haven't used any BAPIs for production orders before so I can't give you a definite answer. If you cannot find an appropriate BAPI, you might also try creating a BDC/Call transaction update.
6. Review the error messages/return code from your production order change
7. Output some type of report to the user regarding successful updates, errors, etc.
I hope this helps provide some guidance.
Best Regards,
Chris H.

Who can help - several problems with HDV editing in Premier Elem. 8

For several years I have edited DV video with Ad. Prem. Elem. 3.0 without serious problems. Now I'm also shooting HDV video and have bought and installed Ad. Prem. Elem. 8 (PE8). To try out PE8 I have started up two projects, but only to be met with several very serious problems. Before buying PE8 I tried a 30 days version of Ad. Prem. Pro on the same PC without problems.
My PC (from march 2010) is as follows:
Operating system                   Windows 7 Ultimate 64 bit (PE8 update is also installed)
Processor                              Intel(R) Core(TM) i7-930 4x2.8GHz 4.8 GT/s (Gigabyte GA-EX58A-UD3R)
Ram                                      DDR-3-1333 12GB (Kingston)
Graphic card                         ATI HD 5870 1GB DDR5 PCI-5 (AMD)
Harddisc for opr. system C:   Intel X25-M SSDSA2M080G2GN 80GB
Harddisc for photo 1.5TB D: HDS 1500GB SATAII ST31500341 AS (Seragate)
Harddisc for video 1.5TB E:   HDS 1500GB SATAII ST31500341 AS (Seragate)
Disc drive                             Plextor BD-R PX-B940SA SATA
Disc drive                             Samsung DVDWBD SH-B083L
Software installed                  C: Office pro/Ad. reader/RegistryBooster/Syst.Tweaker/Canon camera and
                                             printer software/Q.TimePlayer/AVG free (anti virus)
                                             D: ACDSee Pro3/Photosh.Lightroom 2.7/Photosh.Elem. 8.0
                                             E: PE8
Video cameras                       Sony HVR-Z5P (HDV 1080i) / Sony DCR-TVR 10E Pal (DV)
PROB. 1: When capturing HDV there is no picture in the Capt. Window and no sound. The window is plain black surrounded with a thin red line, which together with a red dot in the windows upper left corner indicates, that the capture should be taking place. But to the right after the text "Capture:", "Video" and "Audio" with there checkmarks, are only half lighted (not active). Only on the camera screen can I follow, what should be captured. With the mentioned indications, capture sometimes takes place, and sometimes not. This is first to see, when capturing is stopped.Very irritating and time wasting, as many of my clips has a length up to one hour (live music scenes). The Device Control in the Capt. Window is working o.k.. When capturing DV, everything is working all right from both the HDV and the DV camera.
PROB. 2: When capturing, "drop-outs", not existing on the tape, but generated in the capt. process, can occur - probably because some other small process takes place on the PC. F.ex. if one is looking around in PE8's Preferences Menu.
PROB. 3: The worst thing concerning these "drop-outs" + those eventual existing ones from the tape, is, that after a drop-out the picture/sound no longer are synchronized. From the drop-out and to the end of the clip, the sound is 11-12 frames behind the picture.
PROB. 4:   When editing/looking at a film in the Monitor Panel, the picture is not very fluent. It is hacking a bit, which makes it very difficult to adjust the lost synchronization (see prob. 3), which I did by moving just the Sound Bar 11 frames in the Timeline, precise from the spot the drop-out had been before it was cut out.
PROB. 5: When HDV is played back in the Monitor Panel, the sound is not to be heard the last 10-11 sec. of the last captured clip, although the sound signals are easily seen in the Timeline. After a restart of PE8, it is o.k.
PROB. 6: When HDV is played back in the Monitor Panel, it happens, that it suddenly stops unprovoked (none else activity has been done, just looking at the Monitor Panel).
PROB. 7: After having just done a few cuts + adding a bit of text + working with the synchronization (see prob. 4) in the two mentioned HDV projects, I burned a Blue-ray disc (BD-RE) of project I, and after adjusting a bit more on the synchronization, I burned one more, both without problems. Then I tried to burn HDV project II, but now the burning window showed several empty little windows (only Rescan/Copies/Status/Quality had text) - the text in "Status" was: "Invalid disc name". That happens both with and without a disc in the drive. Whit a disc in the drive, I tried to Rescan, but each time only to get a warning window saying:"[..\Src\DVD\MPEGEncoder.cpp-121]". By doing anything with "Quality", the same warning turns up. When "Continue" in the warning window is activated, PE8 goes down. I then tried to burn project I again, but although I succeeded burning 2 disces of that earlier, no success - same problem. And again the same with a new third little HDV project, I had made. If I choose to burn a DVD instead of a Blue-ray disc, everything works well.
PROB. 8: I'm now so frustrated, that I nearly see no other possibility than to give up, and feel depressed over wasted good money + not getting my projects done. But I still have a little hope, that someone out there are able to help me out - and if you try, please don't write in an all too complicated way, as English is not my language (Danish it is). Just to illustrate my difficulties, it took me nearly 8 hours to put this rapport together.
Ulf Olsen, Denmark - mail. [email protected] - tlf. +45 4678 8807 / +45 40 555 888

It's very difficult to answer several questions at once on a forum, Ulf. Is there any chance you could ask just one at a time?
As for your installation -- from your notes, it looks like you may have installed Premiere Elements on your E drive. If this is the case, it will not work. You must install the program on your C drive.
Also, if you can not see video of your capture, it is likely related to an out-of-date video driver. Have you gone to the ATI web site and downloaded the latest driver for your card?
If that doesn't work, you can always capture your HDV footage with HDVSplit, which is available here:
http://strony.aster.pl/paviko/hdvsplit.htm
Also, be sure to go to the Premiere Elements Help menu and select Check for Updates. This will ensure you have the latest patch for the program, which resolves many of the challenges you're experiencing.
Finally, have you ensured that your video project is using the HDV project preset? One of the most important steps you can take in working with this program is to ensure that your project preset matches your source footage.

Who can help by problems with picking?

Hallo all.
Last time I asked "How to get the textures name".
---- >> I created a box and gave it six various textures. With a mouse event I try to get information about the pick.
It is possible to get the x,y,z values and other more, but I need the information witch side of the cube is picked.
The name of the texture (I set it by the creation) is the best for me. But I can't get this data.
There is a sample program in the java 3d pack. Here you can pick one of several cubes or spheres. Then the pickpoint and the closest vertex is marked. Is it possible to identify the side of a cube?
Today I want to extend my question.
I want to get the identity of a picked object from a scene with two or mor objects. (by excample two cubes are shown, one will be picked, the message should by like " cube xxx is picked" cube yyy is not picked..."

It's very difficult to answer several questions at once on a forum, Ulf. Is there any chance you could ask just one at a time?
As for your installation -- from your notes, it looks like you may have installed Premiere Elements on your E drive. If this is the case, it will not work. You must install the program on your C drive.
Also, if you can not see video of your capture, it is likely related to an out-of-date video driver. Have you gone to the ATI web site and downloaded the latest driver for your card?
If that doesn't work, you can always capture your HDV footage with HDVSplit, which is available here:
http://strony.aster.pl/paviko/hdvsplit.htm
Also, be sure to go to the Premiere Elements Help menu and select Check for Updates. This will ensure you have the latest patch for the program, which resolves many of the challenges you're experiencing.
Finally, have you ensured that your video project is using the HDV project preset? One of the most important steps you can take in working with this program is to ensure that your project preset matches your source footage.

I'M NEW TO THIS, i hope someone can help me out with something so simple...

Hello all
i'm a first time user with java...my editor is Visual J++ (trial ed)...i'm testing out java to see if i want to use this for my company. for the past 4 days i've been trying to figure out how to connect to a database (i'm using MS SQL SERVER 2K) i've already posted in the JDBC Fourm...but found no answer...I apologize if I'm posting in 2 different forums at same time...but you gotta feel me on this, over 4 days on just trying to connect is not healthy LOL....
I already downloaded the driver from MS. Installed it followed the user guide (acrobat pdf file) on how to implement it...but i'm still stuck and haven't reached no where....what i want to do is a simple select statement but i can't do that without connecting first....maybe one of you out there has a sample code who uses MS SQL SERVER 2K...or someone can just be a miracle and help out on my code....the code will be attached below
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
public class AccessApp extends Frame
     TextField driver = new TextField(80);
     TextField url = new TextField(80);
     TextField sql = new TextField(80);
     Button doIt = new Button("Do it!");
     TextArea resultArea = new TextArea(10,60);
     public static void main(String args[])
          AccessApp app = new AccessApp();
     public AccessApp()
          super("AccessApp");
          setup();
          pack();
          addWindowListener(new WindowEventHandler());
          show();
     void setup()
          setupMenuBar();
          setLayout(new GridLayout(2,1));
          Panel topPanel = new Panel();
          topPanel.setLayout(new GridLayout(4,1));
          Panel panels[]=new Panel[4];
          for(int i=0;i<panels.length;++i)
               panels=new Panel();
               panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
          panels[0].add(new Label("Driver:"));
          panels[0].add(driver);
          panels[1].add(new Label("URL: "));
          panels[1].add(url);
          panels[2].add(new Label("SQL: "));
          panels[2].add(sql);
          doIt.addActionListener(new ButtonHandler());
          panels[3].add(doIt);
          for(int i=0; i<panels.length; ++i)
               topPanel.add(panels[i]);
          add(topPanel);
          add(resultArea);
     void setupMenuBar()
          MenuBar menuBar = new MenuBar();
          Menu fileMenu = new Menu("File");
          MenuItem fileExit = new MenuItem("Exit");
          fileExit.addActionListener(new MenuItemHandler());
          fileMenu.add(fileExit);
          menuBar.add(fileMenu);
          setMenuBar(menuBar);
     void accessDB()
          try
               Class.forName(driver.getText()).newInstance();
               Connection connection=DriverManager.getConnection(url.getText());
               Statement statement = connection.createStatement();
               boolean hasResults = statement.execute(sql.getText());
               if(hasResults)
                    ResultSet result = statement.getResultSet();
                    if(result!=null) displayResults(result);
               else resultArea.setText("");
               connection.close();
          catch(Exception ex)
               resultArea.setText(ex.toString());
     void displayResults(ResultSet r) throws SQLException
          ResultSetMetaData rmeta = r.getMetaData();
          int numColumns=rmeta.getColumnCount();
          String text="";
          for(int i=1; i<=numColumns; ++i)
               if(i<numColumns)
                    text+=rmeta.getColumnName(i)+" | ";
               else
                    text+=rmeta.getColumnName(i);
          text+="\n";
          while(r.next())
               for(int i=1;i<=numColumns;++i)
                    if(i<numColumns)
                         text+=r.getString(i)+" | ";
                    else
                         text+=r.getString(i).trim();
               text+="\n";
          resultArea.setText(text);
     class ButtonHandler implements ActionListener
          public void actionPerformed(ActionEvent ev)
               String s=ev.getActionCommand();
               if(s=="Do it!") accessDB();
     class MenuItemHandler implements ActionListener
          public void actionPerformed(ActionEvent ev)
               String s=ev.getActionCommand();
               if(s=="Exit")
                    System.exit(0);
     class WindowEventHandler extends WindowAdapter
          public void windowClosing(WindowEvent e)
               System.exit(0);
I hope this helps
and hopefully someone will respond

First use JPanel not Panel.
Panel panels[]=new Panel[4];becomes
JPanel panels[]=new JPanel[4];Then refactor your code so that you use arrays correctly:
panels=new Panel();
panels.setLayout(new FlowLayout(FlowLayout.LEFT));becomes
panels=new JPanel();
panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
I did the above changes to your code and it worked fine.
Dave

I am in shock, I will die if anybody can help me out with my problem read!

Okay, please take the time to read this and help if you can, although I don't know if that is possible at this point.
I started having this problem about a year and a half ago, I had a 2 year old MAC and was using imovie HD, and about every 5 transitions I would add to my project imovie would suddenly shut down. I have spent nearly 10 hours on the phone with Apple Care trying to figure out the problem. I did EVERYTHING, even reinstalled my operating system. Finally I decided I couldn't handle it anymore, so last week I went out and brought a brand new iMac and even added 3 gigs of Ram on top of the 1 that it came with. I installed iMovie HD and just tried tonight and sure enough it is doing the same thing.
This is absolutely unbelievable. I feel like somebody is playing a joke on me. Yes, they are different projects, different user, I've deleted plists, etc. So in this case I would think that this happens to everybody when they are trying to add transitions, imovie just shuts down. But if that were the case, why would the 20 different people I've talked to from Apple care never heard of this problem.
Please, before I throw my Mac out the window and go to a PC, please somebody help me... ;(

Hi Amber - welcome to the forum!
I would hate to be responsible for your premature death - so perhaps I should make no suggestions at all?
It is NOT normal behaviour so there has to be a logical reason for it:
1. What is the source of your input video footage - unusual?
2. Any third-party plugins that may be causing this? Do you have plugins for iMovie?
3. Any unusual applications that you have carried over from your old machine?
4. Where is your iMovie project stored? On an external drive? If so is it formatted for Macs?
5. Have you repaired permissions? To do so go: Applications>Utilities>Disk Utility, then select your start-up drive and hit 'repair permissions'.
Others may have more suggestions for you.
Report back, and hey, don't die on us!!:-))

Has somebody who can help me please with JavaMail and JSP ?

I am new in JSP
And I would wish to create a JSP to send an email with attachment.
For the compilation of my JavaBeans I use JBuilder 9 Personnel version
Then I have j2sdk1.4.0
In C:\j2sdk1.4.0\
For the installation of the API javamail
it is necessary to download two jar files Mail.jar and activation .jar
http://java.sun.com/products/javamail/javadocs/index.html
it is done!
then, I copied my two files mail.jar and activation.jar in the directory
C:\j2sdk1.4.0\lib
And in
C:\jBuilder 9 \jdk1.4\lib
I have family Windows XP
Then from DOS in the the directory c:\ Documents and Settings\MEBARKIA
I have to add this line:
SET CLASSPATH=c:\j2sdk1.4.0\lib\mail.jar;c:\j2sdk1.4.0\lib\activation.jar;
Finally,
for a test, I downloaded an example of Javabean from : http://java.sun.com/developer/qow/archive/74/
the source code is:
import java.beans.*;
import java.util.*;
import java.io.*;
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
public class XYZMail extends Object
implements java.io.Serializable {
private ArrayList mailTo
= new ArrayList();
private String mailFrom ;
private String mailSubject ;
private String mailMessage ;
private String mailHost;
private ArrayList mailAttachments = new ArrayList();
private Properties props;
private javax.mail.Session sess;
private InternetAddress[] address
= { new InternetAddress() };
public XYZMail() {
props = new Properties( ) ;
props = System.getProperties();
public long sendMail () throws MessagingException {
props.put("mail.smtp.host", getMailHost() );
sess = javax.mail.Session.getDefaultInstance(props, null);
sess.setDebug( Boolean.valueOf( "false" ).booleanValue() );
int i = 0;
MimeMessage msg = new MimeMessage(sess);
msg.setFrom(new InternetAddress( getMailFrom() ));
for ( Iterator itr = mailTo.iterator( ); itr.hasNext(); ) {
address[i] = new InternetAddress((String) itr.next()) ;
msg.setRecipients(Message.RecipientType.TO, address);
msg.setSubject( getMailSubject() );
MimeBodyPart mbp1 = new MimeBodyPart();
mbp1.setText( getMailMessage() );
Multipart mp = new MimeMultipart();
mp.addBodyPart(mbp1);
if ( ! mailAttachments.isEmpty() ) {
MimeBodyPart mbp2 = new MimeBodyPart();
FileDataSource fds=new FileDataSource( (String)
mailAttachments.get(0) );
mbp2.setDataHandler(new DataHandler(fds));
mbp2.setFileName( (String) mailAttachments.get(0) );
mp.addBodyPart(mbp2);
msg.setContent(mp);
msg.setSentDate(new Date());
Transport.send(msg);
return 1;
public ArrayList getMailTo ( ) {
return mailTo;
public String getMailFrom ( ) {
return mailFrom;
public String getMailSubject ( ) {
return mailSubject;
public String getMailMessage ( ) {
return mailMessage;
public ArrayList getMailAttachments ( ) {
return mailAttachments;
public String getMailHost ( ) {
return mailHost;
public void setMailHost ( String host ) {
mailHost = host;
public void setMailAttachments ( ArrayList attachments ) {
mailAttachments = attachments ;
public void setMailMessage ( String msg ) {
mailMessage = msg ;
public void setMailSubject ( String subject ) {
mailSubject = subject ;
public void setMailFrom ( String from ) {
mailFrom = from;
public void setMailTo ( ArrayList to ) {
mailTo = to;
I have all these error messages:
"XYZMail.java" : Erreur No. 704 : acc?s impossible au r?pertoire javax\mail en ligne 6, colonne 1
"XYZMail.java" : Erreur No. 704 : acc?s impossible au r?pertoire javax\mail\internet en ligne 8, colonne 1
"XYZMail.java" : Erreur No. 704 : acc?s impossible au r?pertoire javax\activation en ligne 9, colonne 1
"XYZMail.java" : Erreur No. 302 : classe javax.mail.Session non accessible ; aucune classe ni source trouv? pour javax.mail.Session en ligne 22, colonne 20
"XYZMail.java" : Erreur No. 300 : classe InternetAddress introuvable dans classe gestionbadges.XYZMail en ligne 23, colonne 9
"XYZMail.java" : Erreur No. 300 : classe MessagingException introuvable dans classe gestionbadges.XYZMail en ligne 31, colonne 32
"XYZMail.java" : Erreur No. 300 : classe InternetAddress introuvable dans classe gestionbadges.XYZMail en ligne 24, colonne 9
"XYZMail.java" : Erreur No. 302 : classe javax.mail.Session non accessible ; aucune classe ni source trouv? pour javax.mail.Session en ligne 34, colonne 19
"XYZMail.java" : Erreur No. 300 : classe MimeMessage introuvable dans classe gestionbadges.XYZMail en ligne 38, colonne 1
"XYZMail.java" : Erreur No. 300 : classe MimeMessage introuvable dans classe gestionbadges.XYZMail en ligne 38, colonne 23
"XYZMail.java" : Erreur No. 300 : classe InternetAddress introuvable dans classe gestionbadges.XYZMail en ligne 40, colonne 17
"XYZMail.java" : Erreur No. 300 : classe InternetAddress introuvable dans classe gestionbadges.XYZMail en ligne 42, colonne 18
"XYZMail.java" : Erreur No. 302 : classe Message.RecipientType non accessible ; aucune classe ni source trouv? pour Message.RecipientType en ligne 46, colonne 27
"XYZMail.java" : Erreur No. 300 : classe MimeBodyPart introuvable dans classe gestionbadges.XYZMail en ligne 50, colonne 1
"XYZMail.java" : Erreur No. 300 : classe MimeBodyPart introuvable dans classe gestionbadges.XYZMail en ligne 50, colonne 25
"XYZMail.java" : Erreur No. 300 : classe Multipart introuvable dans classe gestionbadges.XYZMail en ligne 53, colonne 1
"XYZMail.java" : Erreur No. 300 : classe MimeMultipart introuvable dans classe gestionbadges.XYZMail en ligne 53, colonne 20
"XYZMail.java" : Erreur No. 300 : classe MimeBodyPart introuvable dans classe gestionbadges.XYZMail en ligne 57, colonne 1
"XYZMail.java" : Erreur No. 300 : classe MimeBodyPart introuvable dans classe gestionbadges.XYZMail en ligne 57, colonne 25
"XYZMail.java" : Erreur No. 300 : classe FileDataSource introuvable dans classe gestionbadges.XYZMail en ligne 59, colonne 1
"XYZMail.java" : Erreur No. 300 : classe FileDataSource introuvable dans classe gestionbadges.XYZMail en ligne 59, colonne 24
"XYZMail.java" : Erreur No. 300 : classe DataHandler introuvable dans classe gestionbadges.XYZMail en ligne 61, colonne 25
"XYZMail.java" : Erreur No. 300 : variable Transport introuvable dans classe gestionbadges.XYZMail en ligne 70, colonne 1
Thanks for your's help!!!!!

Thank you very much for your answer wew64.
Yes, I have a local server TOMCAT
But the problem
It is on the compilation I do not arrive has to compile my javabean XYZMail java
With jbuilder 4
However I have to configure my CLASSPATH on the level of DOS
And on the variables of enivrements of Windows XP.
I copied the two files mail.jar and activation.jar everywhere
In
C:\j2sdk1.4.0\lib
And in
C:\j2sdk1.4.0\jre
C:\j2sdk1.4.0\jre\lib
Even case with
c:\jBuider 4
thanks.

Is there anyone who can help me out..plz plzz..very very urgent

Hi frnds,
In a zreport for A/R ageing for japan the output has two modes:-
a) screen
b) spreadsheet
when i try to upload the output in spreadsheet for language 'ENGLISH(EN)' the output in excel sheet
is perfect as follows:-
date company code address city region
12/05/2005 1010 green park delhi 10
01/06/2006 1000 sanjose aus 20
this is the correct format which comes in english language while excel sheet upload.
but in japan it comes like this:-
dat company cod addres cit regio
12/05/200 101 greenpar delh 1
01/06/200 100 sanjos au 2
the last word or digit of every word or line is absent when i logon in japan(ja) language and
execute it and upload it in spread sheet.
its a simple write statement report.
i got replies regarding unicode or conversion issues..
but all other reports are working fine when i try to upload the output in excel sheet for JAPANESE language.
Thnx
daniel

So, is the screen mode reporting ok?
Can you show the part of the code that does the spreadsheet download?
Are you using open dataset?

Dates in email all the same when older than 2 days. I saw similare questions but no solutions , who can help me ?

All dates in my emails (on all my 4 apple computers) are on May 5 , when older than 2 days. Is there anyone who can help me out of this very annoying problem please?
I saw simmilar questions from people in 2008 but no answers.
Thanks in advance.

solved

Who can help me out with my built-in iSight issue?

Similar Messages

Maybe you are looking for