Who can solve oracle error ORA-0012638 ?

Why I get this error when I re-start oracle after join networking domain ?
When the computer in lcoal mode ,the oracle is normal .
How can I solve this error ?

Hello fredovolley,
Welcome to the HP Support Forums!
I see that you are experiencing an error 403 with the Photosmart 5520 series. I would like to offer the steps I have given before, check them out here: Re: Trouble scanning using Photosmart 6520
Even though it states it is for a 6520, the steps are all the same. I hope this help, cheers!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Who can solve the error code 403 on hp5522 ? help please

who can solve the error code 403 on hp5522 ? help please

Hello fredovolley,
Welcome to the HP Support Forums!
I see that you are experiencing an error 403 with the Photosmart 5520 series. I would like to offer the steps I have given before, check them out here: Re: Trouble scanning using Photosmart 6520
Even though it states it is for a 6520, the steps are all the same. I hope this help, cheers!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Oracle error ORA-01461when trying to insert into an ORACLE BLOB field

I am getting Oracle error ‘ORA-01461: can bind a LONG value only for insert into a LONG column' when trying to insert into an ORACLE BLOB field. The error occurs when trying to insert a large BLOB (JPG), but does not occur when inserting a small (<1K) picture BLOB.(JPG). Any ideas?
BTW, when using a SQL Server datasource using the same code.... everything works with no problems.
ORACLE version is 11.2.0.1
The ORACLE datasource is JDBC using Oracle's JDBC driver ojdbc6.jar v11.2.0.1 (I also have tried ojdbc5.jar v11.2.0.1; ojdbc5.jar v11.2.0.4; and ojdbc6.jar v11.2.0.4 with the same error result.)
Here is my code:
<cfset file_mime = Lcase(Right(postedXMLRoot.objname.XmlText, 3))>
<cfif file_mime EQ 'jpg'><cfset file_mime = 'jpeg'></cfif>
<cfset file_mime = 'data:image/' & file_mime & ';base64,'>
<cfset image64 = ImageReadBase64("#file_mime##postedXMLRoot.objbase64.XmlText#")>
<cfset ramfile = "ram://" & postedXMLRoot.objname.XmlText>
<cfimage action="write" source="#image64#" destination="#ramfile#" overwrite="true">
<cffile action="readbinary" file="#ramfile#" variable="image_bin">
<cffile action="delete" file="#ramfile#">
<cfquery name="InsertImage" datasource="#datasource#">
INSERT INTO test_images
image_blob
SELECT
<cfqueryparam value="#image_bin#" cfsqltype="CF_SQL_BLOB">
FROM dual
</cfquery>

Can't you use "alter index <shema.spatial_index_name> rebuild ONLINE" ? Thanks. I could switch to "rebuild ONLINE" and see if that helps. Are there any potential adverse effects going forward, e.g. significantly longer rebuild than not using the ONLINE keyword, etc? Also wondering if spatial index operations (index type = DOMAIN) obey all the typical things you'd expect with "regular" indexes, e.g. B-TREE, etc.

Who can solve my problem? My problem in below.

Who can solve my problem? My problem in below.

hi,my problem now is :
exception
org.apache.jasper.JasperException
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:372)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
java.lang.NullPointerException
     net.sf.hibernate.examples.quickstart.HibernateUtil.currentSession(HibernateUtil.java:24)
     org.apache.jsp.testCat_jsp._jspService(testCat_jsp.java:65)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
package net.sf.hibernate.examples.quickstart;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
import net.sf.hibernate.*;
import net.sf.hibernate.cfg.*;
public class HibernateUtil {
private static Log log = LogFactory.getLog(HibernateUtil.class);
private static SessionFactory sessionFactory ;
static {
try {
// Create the SessionFactory
sessionFactory = new Configuration().configure().buildSessionFactory();
catch (Throwable ex) {
log.error("Initial SessionFactory creation failed.", ex);
System.out.println(ex.toString());
public static final ThreadLocal session = new ThreadLocal();
public static Session currentSession() throws HibernateException {
Session s = (Session) session.get();
// Open a new Session, if this Thread has none yet
if (s == null) {
s = sessionFactory.openSession();
session.set(s);
return s;
public static void closeSession() throws HibernateException {
Session s = (Session) session.get();
session.set(null);
if (s != null)
s.close();
}

Using PreparedStatement and the Oracle Error ORA-1000

Hi,
I have a question about PreparedStatement objects that is not so simple to explain for me. What I would like to know is: if I use a PreparedStatement following traditional and generic steps:
1- PreparedStatement pStmt = Connection.prepareStatement(sQuery);
2- pStmt.setXXX(i,j);
n - pStmt.setXXX(i,j);
n+1 - ResultSet rs = pStmt.executeQuery();
n+2 - while(rs.next()){ ... retrive ResultSet data ... }
n+3 - rs.close()
n+4 - back to point number 2
and at the end (as you can see in the point numbered n+4), instead of closing the PreparedStatement pStmt using the close() method, I reuse the PreparedStatement pStmt comeing back to the point numebr 2 and setting again all its parameters with new values ... then ... what heppens in the Oracle database ? Has been the cursor (so the mamory area), associated to my PreparedStatement object pStmt, duplicated or is it the same ?
I know that Java allows you to do this kind of operations with PreparedStatement, and I know that in tha Java Documentation is explained to follow this strategy to optimize the execution time because in this way the same PreparedStatement is precompiled and prepared only once. But if I do a for loop following the steps explained before, after many iterations I have the error "ORA-1000: maximum open cursors exceeded". This error is the reason of my question. Does this error means that it's mandatory to close a PreparedStatement always, otherwise if you reuse it without closing it then the corresponding database cursor will be duplicated ? If it is so, then I think this is a contradiction with official java documentation ...
I'm using Oracle8i (version 8.1.7) and Oracle JDBC Thin Driver (Windows NT) for use with JDK 1.2.x. Moreover, in my database istance the parameter "maximum open cursor" is equal to 800 ...
Thank you very much for suggestions :-)

There is no need to close a prepared statement or its resultset for every iteration.
After the first iteration in a loop, all subsequent executions of it will close the previous resultset. By adding close() method, you are making one extra costly call to the DB for no reason.
Following is the sample code.I know what you are saying. In fact at the beginning I wrote my code in the same way of your sample (see the code of my first post at the begin of this page).
But doing so, after thousand iterations of the loop, I had "Oracle Error ORA-1000 : maximun open cursor exeeded" even if in my database istance the parameter "maximum open cursor" is equal to 8000.
At this moment in my code, for each iteration, I close the PreparedStatement and in this way I don't have anymore the error :-((
So it seems that only in theory we can reuse a preparedStatement without closing it. In fact if we see the oracle system table "$open_cursor" (as Konrad Pietzka suggest me) we can find that, for each interation,
at our line code "rs = pstmt.executeQuery();" correspond a new cursor in the database: this means that for each method "pstmt.executeQuery()" the database open a new cursor and do not use the previous one as it should.
I posted a question two months ago to search if someone had the same problem (it seems that Konrad Pietzka had the same situation) and was able to explain me what is the cause.
The only reason I found by myself for this problem, is that probably the Oracle JDBC Thin Driver for Windows NT/2000 has some bugs... but I'm not sure ...
Thank you very much for you time !!
bye :-))
Fidalma

How do we solve the error ORA-32001?.

How do I create a SPFILE and re-start the instance using the SPFILE to solve the error ORA-32001?.
Thank you,
Rhode

You can do (as sysdba)
SQL> create spfile from pfile;
SQL> shutdown immediate
SQL> startup

Oracle Error :: ORA-12637 Packet receive failed

Hi buddies,
One of my staff's PC is receiving this error sometimes when she is trying to connect to the database and she is able to connect sometimes.
Oracle Error :: ORA-12637 Packet receive failed What could be the cause.
I tried replacing her tnsadmin with my tnsadmin and it didn't make a change, still able to connnect sometimes and sometimes not.
Able to connect using PL/SQL developer, but not using our customized application. (Everyone else are able to connect)
Is it network problem?
Please advice.
Thank You very much.
Alagu
Edited by: user645399 on Sep 16, 2009 8:37 PM

And from this cut-and-paste the OP is supposed to take what actions to solve the problem? Please don't just post that which is one google away every time someone posts an ORA- exception. You make some valuable contributions here but just posting expanded text doesn't give someone a list of actions to take that will help them resolve the issue. Better the question is left unanswered so others will be more likely to offer help.
To the OP:
It is highly likely you have a network issue and the fact that it is isolated to a single machine makes it reasonably easy to fix. First try to figure out which component is failing. Go to the router or switch and swap wires between that client machine and another one that is working properly. Does the problem move? If not then swap the wires. Again does the problem move? Next the NIC card? What if you put another machine on the desk and put the original hard disk in it?
Sometimes it just isn't worth the effort so you just swap out the machine.
Intermittent problems are always hard to identify and fix. What is on your side is that this is only affecting a single user.

Urgent-Oracle Error :: ORA-39778-

Hi
I got following Oracle Error : ORA-39778 "the parallel load option is not allowed when loading lob columns" on production. yesterday we updated database with patchset 9.2.0.7 and DST/JVM compliant.
Please reply me ASAP.
Regards,
RJ

Sry I didn't check back this afternoon.
As posted,
Here's the note from metalink doc Note:396387.1
Then e this to apply the files manually in the following way:
Download the identified patch.
Unzip the patch, and locate the 2 files timezone.dat and timezlrg.dat in the "files/oracore/zoneinfo" directory of the uncompressed patch (or from the relevant .jar file of a patchset). If there is also a readme.txt in this location then make a note of this as well.
Backup your existing files in $ORACLE_HOME/oracore/zoneinfo - THIS CAN BE VITAL, DO NOT SKIP.
Copy the 2 .dat files and possibly the readme.txt file that were found in step 2 into the $ORACLE_HOME/oracore/zoneinfo directory.
Restart the database (in case of installation on a database), or restart the client applications (in case of client install). Note that the database did not need to be down before the time zone files were applied, but it does need to be restarted afterwards.

Oracle error ORA-22905: cannot access rows from a non-nested table item

Oracle error ORA-22905: cannot access rows from a non-nested table item
Creating a report using oracle plsql code .
Getting error ;
Oracle error ORA-22905: cannot access rows from a non-nested table item
when I am trying to pass data in clause in pl sql proc
basically I have a proc which takes 2 parameters(a and b)
proc (
P_a varchar2,
p_b varchar2,
OUT SYS_REFCURSOR
culprit code which is giving me the error and on google they say cast it but I dont know how to do it in my context
--where id in (
--        SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_a) FROM dual)
--        union
--        SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_b) FROM dual)
data sample returned from this :SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_a) FROM dual)
'Abc','def',
data sample returned from this;SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_b) FROM dual)
'fgd','fth',
Any answers ?
How to pass data in clause in a better way

Why are you creating a duplicate post? I already asked you to post p_cd_common.get_table_from_string. In particular what is function return type and where it is declared. As I already mentioned, most likely function return type is declared in the package and therefore is PL/SQL type. And TABLE operator can only work with SQL types.
SY.

When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?

When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?

Hi Amir.09395340646,
Welcome to the Support Communities!
What app are you trying to download? Is it iPhoto for iOS? What error message are you receiving? The first thing I would suggest is to log out of your iTunes Store account on your iPhone. Then restart the device and log in again.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
If the above did not resolve your issue, follow the troubleshooting steps in the article below.
The link includes the complete details and screenshots, but I've highlighted a few points for you:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
- Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
- Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
- Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
- Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
- Try resetting (turning off and then on again) your Wi-Fi router
- If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connections or iOS: Troubleshooting Wi-Fi networks and connections.
I hope this information helps ....
- Judy

Ajax submit failed: error = 403, forbidden----how can solve this error

Ajax submit failed: error = 403, Forbidden--how can solve this error to create a new eprintcenter account

I am having the SAME problem. This is so frustrating. If i try to log on with teh user account I already have, I get the above message. If i try to create a new accoutn it says the account is already existing. If i click on forgot password, nnothing happens. HELP! I am stuck in a loop!!

Where can find Oracle error code and message?

Where can find Oracle error code and message?

http://otn.oracle.com/pls/db92/db92.to_toc?pathname=server.920%2Fa96525%2Ftoc.htm&remark=docindex
That would be the "Error Messages" manual.

APP-DT-34605:Oracle error ORA-4098 occured while writing to PER_ALL_ASSIGNM

We have Upgraded DB from 10.2.0.2 to 10.2.0.5 having same Apps version 11.5.10.2,
we have seen below issue upon upgrade,
While updating any information in Assignment i.e. Assignment Status getting following error.
APP-DT-34605:Oracle error ORA-4098 occured while writing to PER_ALL_ASSIGNMENTS_F
How to overcome these errors, please advise,
RM

Please see these docs.
PERWSHRG: Updating Assignment Gives Error APP-DT-34605 ORA-6510 [ID 286294.1]
Update Employee Assignment Details Cause Error: APP-DT-34605-- ORA-20001 occurred writing to PER_ALL_ASSIGNMENTS_F [ID 793451.1]
APP-DT-34605 Error When Saving on Assignment Form [ID 829292.1]
Receive APP-DT-34605 Error When Updating an Existing Payment Method [ID 780090.1]
ORA-06508 PL/SQL Could Not Find Program Unit Being Called: "APPS.PAY_PAY_SHD" [ID 1170903.1]
Thanks,
Hussein

Oracle Error ORA-03121

I installed Personal Oracle 8i, and Oracle Forms.
When I try to connect to a SQL*Server database using a DSN, I get the following:
ORA-03121 no interface driver connected - function not performed.
Do I need OCA installed?
Can I download this from somewhere (doesn't seem to be avialble from oracle.com)?
null

You most certainly can connect to a personel oracle database
using sqlnet. If fact you can connect to an oracle database
running on a win95 platform from another pc running on a
network. All you need to do is insure that the database listener
is running on the platform where the personel oracle is
installed.
James Aiken (guest) wrote:
: With Personal Oracle you can not use SQL*Net to connect to the
: database. You should have the Oracle_Sid set and do NOT
specify
: a DB alias when trying to connect.
: Steve (guest) wrote:
: : You need to install V2 of sqlnet. designer and developer
: : V2 and below will not do a direct connect to Oracle V8.
: : If you do not want to provide a db alias at login time
: : try entering the variable LOCAL in your registry. Set LOCAL
: : to your db alias.
: : Martin (guest) wrote:
: : : Hi...
: : : When I use Developer 2000 Form 4.5 to connect oracle
: : : database (PO8), I have an error ORA-03121: not driver
: connected
: : : function not perfomed.
: : : Anyone can help me to solve this error ???
: : : thanks ....
null

Oracle error ORA-03113: end-of-file on communication channel

Dear Support
I am getting "ORA-03113: end-of-file on communication channel" when I am trying to access my application.
The current setup is following
- two node Sun Cluster with node name as sep1n1 and sep2n2
- running Oracle RAC (oracle database 10g) with instance name as ADVFRW1 and ADVFRW2
Please see attached oracle trace file which was generated at the time of problem.
Can you please help me to know what can be the reason of this oracle error/crash?
Thanks
Regards
VS

I don't see any Trace file.
Network Problems?
Are the databases up and running?

Who can solve oracle error ORA-0012638 ?

Similar Messages

Maybe you are looking for