Who can tell me how to get the CRT for BBPCRM patch 8
hello ,
my solution patch level is SAP_BASIS 700 0011 SAPKB70011 SAP Basis Component
SAP_ABA 700 0011 SAPKA70011 Cross-Application Component
PI_BASIS 2005_1_700 0011 SAPKIPYJ7B PI_BASIS 2005_1_700
ST-PI 2005_1_700 0003 SAPKITLQI3 SAP Solution Tools Plug-In
SAP_BW 700 0012 SAPKW70012 SAP NetWeaver BI 7.0
SAP_AP 700 0008 SAPKNA7008 SAP Application Platform
BBPCRM 500 0007 SAPKU50007 BBPCRM
CPRXRPM 400 0002 SAPK-40002INCPRXRPM SAP xRPM/cProjects/cFolders 4.00 (ABAP)
ST 400 0010 SAPKITL420 SAP Solution Manager Tool
ST-A/PI 01G_BCO700 0000 - Servicetools for other App./Netweaver 04
ST-ICO 150_700 0007 SAPK-15077INSTPL SAP Solution Manager Implementation Cont
ST-SER 700_2005_2 0002 SAPKITLOC2 SAP Solution Manager Service Tools
But now , i find some CRM function can not be used , for example , i could not create a servcie message and monitor , if i create a service message and monitor the message , an abap dump occurs , the dump error is
CALL_METHOD_NOT_IMPLEMENTED
CX_SY_DYN_CALL_ILLEGAL_METH
Error in the ABAP Application Program
The current ABAP program "CL_EX_CRM_APPOINTMENT_BADI====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
i try to upgrade the BBPCRM patch to 8 . the system tell me that you should need a CRT for the patch . i try to find the CRT, Unfortunate , i could't find it . who can tell me how to find the CRT . thanks !
Hi Tony,
Please, refer to note 892412. Here you can find the patch level required depending on the solman used. I can tell u that we have applied this note and currently we create service messages. Check this patch levels first.
Regds,
Jose Sorli
Similar Messages
-
Who can tell me how to use the transction "KKRC"?
who can tell me how to use the transction "KKRC"?
Please explain me all the steps to be required.
Thanks in advance!hi..
http://help.sap.com/bp_bl603/BBLibrary/Documentation/181_BPP_EN_BR.doc
KKBC HOE Transaction code Error
Regards -
Who can tell me how to use the FM "SSF_FUNCTION_MODULE_NAME"?
I wants to known the FM "SSF_FUNCTION_MODULE_NAME" in every detail and particular.
it would be best show me a demo.
thanks very much !Hi,
PARAMETERS:
P_FORM TYPE TDSFNAME. " ------> This parameter is for passing the smartform name
DATA:
FM_NAME TYPE RS38L_FNAM." -----------> This will get the function module name of the smartform
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = P_FORM
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
" This function module is called with the Function module of the smart form when there are no FORM
" interface parameters declared, if you have any form interface parameters those cannot be passed through
" this function module
CALL FUNCTION FM_NAME
* EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
* CONTROL_PARAMETERS =
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
* OUTPUT_OPTIONS =
* USER_SETTINGS = 'X'
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
" when you have any form interface parameters defined in the smartform then you should call the
" function module of the smart form and remove the function module name give the parameter
" FM_NAME to it so you call the smart form through the smartform name
regards
sarves -
Who can tell me how to find the leave request Webdynpro for ABAP iview
Hi,Expert,
As I know Portal only has Webdynpro for java iview for leave request iview in the past.
but someone tell me SAP portal has delivered some new standard WebDynpro for ABAP iview.
I have a requirement to create a employee role for new Leave Request service created by WD ABAP . Under Content Provided by SAP in Content Administration, I couldn't find the iView assocated to the leave request except the Java one. Is there have any Employee Self-Service Web Dynpro ABAP workset ?
thanks
OliviaThe business package for ESS based on Webdynpro for ABAP is available only for ECC 6.0 EHP5.
If you are on EHP5, you may choose to use this version of the BP.
http://help.sap.com/erp2005_ehp_05/helpdata/EN/25/340b0507434193adbfe3f8fc8896c7/frameset.htm
Leave Request application:
http://help.sap.com/erp2005_ehp_05/helpdata/EN/1f/a073be62744fcca7e1fae9942f0031/frameset.htm
Thanks,
Shanti -
I want to stop the face reading programm on my Mac. I would like to delete it. Thank you!
Exactly what face reading program are you talking about? Did you download and install it?
Also, please furnish relevant information: Mac model/year. -
Who can tell me how to use ni-imaq functions imgSessionSerialFlash,imgSessionSerialWrite and imgSessionSerialRead to set and get my carema attribute?
My camera is duncantech ms3100 and the frame grabber is pci-1428.I use ni-imaq2.6.When I use these functions,it tell me error -1074397163(IMG_ERR_BINT:Bad interface) .I have the same problem on my IPAD 2. One calender that i cant delete or find any settings for... Its just in the calender app under diffrent calenders. how do i delete it?
-
Who can tell me how to finish to filter content of file by Minifilter?
Hi
who can tell me how to finish to filter content of file by Minifilter?
Thanks
www.jiangkai.netThis is a huge project at your level of knowledge expect multiple people for 18 months to 3 years to complete it. You may want to look at the OSR kit for doing this
https://www.osr.com/monadnock/ It is expensive but it means you would have a product this year.
Don Burn Windows Filesystem and Driver Consulting Website: http://www.windrvr.com -
I'm trying to transfer data (docs, emails) from an old G4 iMac running OS 10.3.9 to brand new iMac on 10.8.1 I'm stuck, any help greatly appreciated. (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)
AMoriyama wrote:
I have the old machine backed up onto an external firewire disk but can't hook that up to the new imac as I'm waiting for delivery of a firewire 400/800 adaptor - therefore starting the old machine up as a slave is also subject to the same delay.
I was hoping there might be some way to create a network between the 2 machines (and 2 different versions of the OS) to be able to transfer data across immediately but perhaps I'll just have to wait for my firewire adaptor to arrive.
I don't understand why you're buying a Firewire adaptor, since AFAIK both of your computers have Firewire already built in.
All you need is a firewire cable. Connect the Firewire socket on the old machine to the Firewire socket on your new iMac.
Then start the old machine in Target Mode (i.e. by holding down the T key on its keyboard, while it's starting up, until you see the three-legged T icon hopping around the screen of the old machine.)
At that point you will also see a new icon on the screen of your new iMac. This is the hard drive of your old machine. By clicking on it you can navigate through it any way you like, just as you would normally.
Just drag across whatever you want from the old computer to the new one. This will leave everything on the old computer untouched.
- or use Migration Assistant but in my experience, Migration Assistant isn't very reliable and fails to migrate large amounts of stuff. -
Who can tell me how to creat ePubs?
Who can tell me how to creat ePubs?
Try searching google or elsewhere for "how create epub on windows"
-
can any body tell me how to get a call for adobe interview for a flex developer post for 2.6 years??
hi,
there's some microsoft support to this issue. check here http://support.microsoft.com/kb/2008385
regards.
From out of Nowhere -
Could someone please tell me how to get the voice turned off my iPad and to be able to move freely around on the screen?
A double-tap acts like a single tap and you need to use three fingers to scroll when VoiceOver is on:
Press Home.
Tap Settings. Then double-tap Settings.
Tap General. Then double-tap General.
Use three fingers on the screen to scroll to Accessibility.
Tap Accessibility. Then double-tap Accessibility.
Tap VoiceOver. Then double-tap VoiceOver.
Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.
http://support.apple.com/kb/HT4064 -
How to get the order for these decoration​s?
hello,
I want to programatically resize all the controls, indicators and decorations on the front panel.
I am getting the references of all the controls and indicators and able to resize them, as each n every control and indicator has a tabbing order set to it.
I am also getting the references of all the decoration used on the front panel but not able to get the order.
how to get the order for these decorations?The order of the decorations is the same as the back to front order. So you
can change it by bringing decorations to front, or sending them to the back.
It has been suggested many times that decorations should have labels as well
as controls, but at the moment there is no way to tell which reference
belongs to which decoration (besides position and order).
Regards,
Wiebe. -
How to get the "Key" for Dimension in SSAS.
Hi
How to get the "Key" for Dimension in SSAS.
(Below value is the PPSParameters table XML column value in PPSDatabase in SharePoint.
Below three key values are belongs to "Dimension". I have tried to find the key but I could net get it.)
<NewDataSet>
<UserValues><Key>16A201A9E75128559F947D58E6D187A9</Key></UserValues>
<UserValues><Key>7FBEA449A6ED5606973306445839619E</Key></UserValues>
<UserValues><Key>A8F75F9720817BCD2E1DFC1C1CF1E678</Key></UserValues>
</NewDataSet>
Thanks & Regards
Poomani SankaranTo Be Honest there is not one straight Cmdlet that atleast I have come across
The best way would if you have Lync monitoring server
Using the Lync Server 2013 Monitoring Server
If you have the Monitoring Server role configured in your environment, and for Lync Server 2013 everyone should!, you can use information contained in the LcsCDR database to pull back the last time a user signed in. You can run the following query* to
pull back the user's SIP URI and their last login time:
USE LcsCDR
SELECT dbo.Users.UserUri, dbo.UserStatistics.LastLogInTime
FROM dbo.UserStatistics
JOIN dbo.Users ON dbo.Users.UserId = dbo.UserStatistics.UserId
ORDER BY UserUri
Which produces the following output:
The advantage to using the Monitoring Server to obtain this data is that unlike the information contained in the rtcdyn database, the information from the LcsCDR data will persist even when the user isn't signed into Lync.
To get approx count of users enable for Lync Server in your organisation
Get-CsUser -Filter {Enabled -eq $true} | MeasurE
Please not the above command let will give you an approx number not exact
From the Monitoring report yet the SIP account that signed in and then from count find out how many user havent signed in this is manual task
Hope this is helpful
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph -
How to get the drivers for Dell PowerEdge M620 in INF format?
How to get the drivers for Dell PowerEdge M620.
We tried downloading
http://www.dell.com/support/home/us/en/19/product-support/product/poweredge-m620/drivers but they are in exe?
How to get inf files for those?As Jason pointed out, they can be extracted, I believe this can be done with 7zip also... Or you can just install one M620 from scratch, install the Dell drivers and then use this tool:
http://gallery.technet.microsoft.com/ConfigMgr-Driver-Injector-aae7d17d to grab the drivers in .inf format. -
A^b = n ,How to get the value for a ?
a^b = n ===> n = Math.pow(a,b)
How to get the value for a ?
dose Java have API to get the value for a ?
Thanks for help~~~a^b = n
=>
a = n^(1/b)
So,
a = Math.pow(n,1.0/b)
Maybe you are looking for
-
just started a new apple tv and also started using an iMac . I have itunes on the iMac but i cant get the apple tv to sync or find any settings to do so ! How can I get the iMac and apple tv to sync the itunes ? i have a internet connection between t
-
How to use EvLST and EvSET in BPC NW 7.0
I would like to list the members of dimension "Entity" by putting a filter on one of the property. In 5.1 I used EvLST and EvSET, which was working fine. But in NW 7.0 , I am not getting the list of dimension members eventhough the function returns T
-
HT1600 can you download apps to apple tv
can you buy apps for apple tv like the channels on a roku?
-
Still can't launch any updated iWorks apps after after reinstalling Mavericks
So Mavericks works fine and my old versions of iWorks apps were fine. The they updated to later versions. First of all I had issues, then realized that the old icons were still on the Dock. Once removed, they worked. Also removed old apps from the Ap
-
We have activated the Oracle 'SQL Tuning pack' however only one function "SQL Tuning Advisor" is activated/visible in ST04 and other functionality is not visible. We have already taken license of 'SQL Tuning pack' . Other then this we want to use fo