Who has a binary built of bdbxml2.2.13 on mingw+msys

just wonder somebody get bdbxml2.2.13 built successfully using mingw+msys.
may I have a copy of your binary built.
thanks

i live in a place that used to be called Rural America (Algonquin, IL, Mchenry County, U.S.A.) but is now considered an extended part of the Chicago Suburbs, and Verizon 4G LTE is now finally available here as well (I just ordered my 4G LTE USB Modem yesterday, so I won't get to try it out until it arrives tomorrow by Fed Ex). i will post back here tomorrow as to weather it does actually connect at 4G LTE or not, and how fast 4G LTE really is assuming that it actually does connect at 4G LTE. I am a little bit skeptical as to weather it will actually connect at 4G LTE, because i have owned one of these 4G LTE USB Modems before and all I got then was 3G and the occasional 3G/4G Flip Flop, but that was before Verizon actually had 4G LTE listed on their map for my Area, so just maybe this time things will be faster than last time. The one thing that I definitely do NOT recommend buying a 4G LTE Device if you only get 3G in your area, because, you will actually get a slower speed than if you still had a 3G Device, the Backwards Compatibility Downgrade to 3G is not all that great most of the time and is usually slower than a 3G Device would be in the same area. Just my previous experience from trying it out once before.

Similar Messages

  • I have an I pad can I chat with someone who has an Apple Mac computer

    I have an I pad can I chat with someone who has an Apple Mac computer, if so what do I need to do ??

    Hi,
    In Messages on the iPad you need to be using an Apple ID (which you probably are)
    You can then iMessage (the form of Apple Chat Messaging that is used) to other Apple IDs or iPhone numbers.
    They have to be using iOS 5.5 or higher or OS X 10.8 on a Mac.  ( A Mac could be up to OS X 10.8.2 if updated iOS devices could be up to iOS 6.0.1)
    You then needs either WiFi access or a Data contract and an iPad that can do at least 3G (some have SIM cards)
    10:54 PM      Tuesday; November 20, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HT2515 can I use ichat to talk to someone who has skype?

    Can I use ichat to talk to someone who has skype?

    Hi,
    No.
    9:39 PM      Sunday; November 11, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Who has the following error message..please look it up...

    Hello !
    Who has the following error-message when connecting a ipod to the Cinema Display:
    Aug 6 12:29:01 G5 kernel[0]: /SourceCache/AppleFWOHCI/AppleFWOHCI-244.4.0/AppleFWOHCI.cpp 3435: ERROR: FireWire (OHCI) Apple ID 42 built-in: handleUnrecoverableErrorInt
    Please look in the console Application in the file system.log
    What does it mean ?
    Thanx

    It means that the firewire port in your Cinema Display has problems. Read more here: Thomas Berglund, "Problem with 20" Firewire..Who has the following entry ?" #2, 04:45am Aug 20, 2005 CDT

  • Have your mac announce who has sent you an e-mail

    Hi Guys,
    I am not sure if I am asking this correctly, but I am wondering is there a way for me to make my iMac announce WHO has sent me an e-mail? Like I can have it announce the time.. can I have it say "you've received an e-mail from dad" just to give you an example, is there a way to do this? With the built in software, or does there exist a 3rd party software for this, does anyone know? Much appreciated.

    Check out this hint: http://www.macosxhints.com/article.php?story=20030304111345916
    Scroll down a bit as the script was refined a bit. You basically need to write an AppleScript and then create a rule that runs the script on all new messages.
    Hope this helps.

  • Possible to see at a glance who has/has not viewed pdf via the 'Tracker'?

    We are working on setting up procedures for Browser-based reviews. We were hoping we'd be able to see at-a-glance who had/had not viewed or sent back comments, and the date they sent them in the Tracker, but it seems to be just a list of who it was sent to originally. How do you know who has sent comments, other than manually scrolling through all the comments to see people's names?

    Hi;
    No, there isn't a way for you to see anything about who has saved progress.
    Thanks,
    Josh

  • HT3819 How can I transfer songs from my ITunes account to my daughter's who has a different Apple ID but same account info?

    How can I transfer songs from my iTunes account to my daughter's, who has a different apple ID, but the same account information?

    Purchases cannot be transferred between different Apple IDs.

  • Is there a way for an end user to see who has membership in a security group

    Windows Server 2008 R2
    Active Directory Domain
    Windows 7 workstations
    I am looking for a way that my end users can look at a folder security tab and then discover who has membership in the security groups listed.
    Is that possible? Any drawbacks or concerns?

    Hi Tod,
    Based on my research, other than viewing group membership in ADUC, we can use this PowerShell cmdlet
    Get-ADGroupMember GroupName and Net Group GroupName to view members in a group:
    However, these commands can only be used on Domain Controllers or when connecting to DCs remotely. That’s because accounts and account membership are stored on Domain Controllers, therefore we can only view group membership on DCs.
    More information for you:
    Viewing the Direct Members of a Group
    http://technet.microsoft.com/en-us/library/dd391915(v=WS.10).aspx
    Net group
    http://technet.microsoft.com/en-us/library/cc754051.aspx
    Best Regards,
    Amy

  • Who has deleted emails from shared mailbox ?

    Hi Guys,
    We have a shared mailbox and is accessed by more than 5 users.
    Some one did something and the emails got deleted. I see them in recoverable deleted items folder.
    Can anybody let me know how to find out who has deleted them ?
    FYI - we do not have auditing enabled on this mailbox prior to deletion.
    But using the MFCMAPI, I was able to figure out the last modification time (which is same for all the emails in this folder)
    So, I think, if we can find who accessed this mailbox during that particular time, I will be near to solution.
    Can you guys let me know how to check who accessed the shared mailbox at a particular time ?
    Thank you in advance.

    Hello,
    If you did not enable the mailbox auditing logging for the mailbox, I am afraid there is no event to record the operations.
    Mailbox audit logging
    https://technet.microsoft.com/en-us/library/ff459237(v=exchg.150).aspx
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Can't see who has replied to the thread in the forum, its pointess?

    What's the point in creating a system where you can't see who has replied to the thread? Its absolutely F**CKING pointless? Does anyone at Adobe have any brains or are they all sitting with their heads up their backsides?
    Surely before you release such garbage you test for these very simple issues, right?
    osgood_(NOT M Golding) If anyone at Adobe is monitoring this please get my screen named changed to what it was previously as well.

    It needs a 'latest reply' on the posted list page like the old version otherwise you have no idea if anyone has replied to the post or not without opening it.
    Latest reply: May 3, 2014 2:17 AM by . osgood_
    The line below is not that necessary in the order of priority, which for all intense and purposes is quite useless. I don't really care about how long ago something was posted or where it was posted but an indication to show 'updated' posts and by who is vital.
    9 minutes ago in Dreamweaver support forum
    Why do we even need 'Dreamweaver support forum'. We already know that's where we are! I guess a selection of posts from other forums may appear in a 'general' postings list somewhere, but who really cares - if I'm asking a question related to DW that's the forum I'm going to, not a general list as I don't care a monkey knackers what's been posted in Fireworks or InDesign or Illustrator. If I did I'd go to those forums.
    If you are tracking several postings it is going to become hugely annoying for both the person who has asked the question and the people helping the original poster as many replies will potentially go unnoticed and not resolved.
    And what's with the silly horizontal scroll bar being created for long lines of text? That's annoying too.
    Plenty of teething issue you need to get your head around over the next few weeks.

  • My facebook profile photo shows up on an email to a friend who has a yahoo email address, but is not my Facebook friend. All my FB privacy settings are at the max. Is this a Yahoo privacy issue? I don't want my photo to go to other than FB friends.

    I recently sent an email to a friend, who is NOT a Facebook friend, who has a yahoo email account, and my Facebook profile picture appeared next to the email. My privacy settings on FB only allow FB friends to see my photo. Why is another yahoo account that is not a FB friend seeing my profile photo and is there a Yahoo privacy setting that will eliminate this from happening? Thank you.
    == This happened ==
    Just once or twice
    == this week

    Did you check that your Facebook settings haven't changed?
    Facebook may have changed them as part of a software update.
    Is there a link in that email (signature) with a link to that picture?
    Try to send an email to yourself.

  • Is it possible to see who has saved progress on a web form, but not submitted?

    We are using FormsCentral for our application process, and we are allowing applicants to save forms. Is it possible to see who has started a web form, and saved it, but hasn't submitted yet? Maybe by cc'ing the email notificiation they get to an admin?
    We'd like to see who is working on the applications, and also to send them a reminder that they need to complete and submit the form by the deadline.

    Hi;
    No, there isn't a way for you to see anything about who has saved progress.
    Thanks,
    Josh

  • How to find out the user who has created  a new field in the custom table.

    How to find out the user details who has created  a new field in the custom table.
    Thanks,
    Joan

    Hi Jesudasan ,
    You can know the user details with version management.Please find the
    below procedure to know.
    Go to table->Utilities tab->version->Version management->Compare the previous one .
    Hope this solves the issue,Let me know if you have any issues.
    Thanks,
    Rajani

  • How  to find out list of users who has logged into webtools

    Hi All,
    From a database administration and monitoring traffic point of view we want to know who has logged into our web tools web site for a given period.  Is there a easy way to have this information. basically user ID , date and time are info we need. (need all users - with or without orders)
    any ideas welcome.
    Regards
    David

    Hello,
    The easiest way to accomplish this is by creating a report.
    Use the SQL query
    SELECT     UserID, LastVisitDate
    FROM         Users
    ORDER BY LastVisitDate DESC
    And a template that looks something like this:
    <html>
    <head>
    <title>%%ReportName%% - %%Today, {0:d}%%</title>
    %%StyleSheet%%
    </head>
    <body>
    <center>
    <h1>%%ReportName%%</h1>
    <table width=800 cellpadding=1 cellspacing=0 border=1>  
    <tr>
    <td><b>User ID</b></td>
    <td><b>Last Visit</b></td>
    </tr>
    <section name="uservisit">
    <tr>
    <td>%%UserID%%</td>
    <td>%%LastVisitDate%%</td>
    </tr>
    </section>
    </table>
    </center>
    </body>
    </html>

  • Could anyone of you please who has a clean install of Windows 8.1 on the SSD drive look at some settings of certain services (below)?

    Hi everyone,
    could anyone of you please
    who has a clean install of Windows
    8.1 on the SSD drive look at some settings
    of certain services (below)?
    Thank you.
    Prefetch and Superfetch. In registry located on way
    HKEY_LOCAL_MACHINE\SYSTEM \CurrentControlSet\ Control\ SessionManager \MemoryManagement \PrefetchParameters.
    I am interested in EnablePrefetcher and
    EnableSuperfetch REG_DWORD value.
    Just a number in parentheses.
    ReadyBoot. In registry located on way HKEY_LOCAL_MACHINE\SYSTEM \CurrentControlSet\Control \WMI\Autologger\ReadyBoot.
    I am interested REG_DWORD value of
    Start. Just a number in parentheses.
    Run dfrgui command. Go to Change settings and have a look if SSD on which is the system installed is included in regular optimalization schedule.
    Registry can be accessed running regedit command.

    Hi,
    Prefetch and Superfetch means that most commonly used files are stored to disk to be more quickly accessed later.
    For Prefetch:
    Disable Caching: 0
    Cache Applications Only: 1
    Cache Boot Files Only: 2
    Cache Everything (default): 3
    For SuperFetch:Disable Caching: 0
    Cache Boot Processed Only: 1
    Cache Applications Only: 2
    Cache Everything (default): 3
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger\ReadyBoot\Start value means:
    disable: 0
    enable: 1
    For more information about clean installation of Windows 8.1 on SSD, I suggest you read below article:
    Windows 8.1 SSD Settings, Etc.
    http://www.tweakhound.com/2013/11/02/windows-8-1-ssd-settings-etc/
    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Karen Hu
    TechNet Community Support

Maybe you are looking for