Who has sol-10-u3-ga-sparc-lang-iso.zip ?

I have problems when downloading this CD format language pack. It stops downloading everytime reaches 13.9M, and it doens't work neither when I changed account.. : (
Who has this file that can share with me via ftp or sth.. ?
TIA,
Sun

I have problems when downloading this CD format
language pack. It stops downloading everytime reaches
13.9M, and it doens't work neither when I changed
account.. : (
Who has this file that can share with me via ftp or
sth.. ?
TIA,
SunHello TIA,
I am currently downloading this file at the moment and I have reached 40% so far. If you are still interested in getting this file please let me know.
Richard

Similar Messages

  • Sol-10-u1-ga-sparc-lang-iso failing on install

    I'm installing solaris 10 on a u5. When I get to the Language cd I get the following message:
    "Unable to read disc for Solaris 10 Languages for SPARC Platforms. Please try again"
    I've downloaded the iso multiple times (md5 checked good) and I continue to receive the same message.
    Any ideas what I might be doing wrong?

    I just downloaded the image again and recreated a new cd. It still fails. I think there must be something wrong with the .iso.
    Does anybody have any information on how I can test the cd after it's be written

  • Where can I download older Solaris 10 cd images (sol-10-u2-ga-sparc-v1.iso)

    Hello,
    I am trying to find older Solaris 10 cd images than the ones in download center. More specifically, I'd like to download the following iso to use them in Simics simulation.
    sol-10-u2-ga-sparc-v1.iso
    sol-10-u2-ga-sparc-v2.iso
    sol-10-u2-ga-sparc-v3.iso
    sol-10-u2-ga-sparc-v4.iso
    sol-10-u2-ga-sparc-v5.iso
    Could you please help me with this?
    Thanks
    Yan

    Perhaps you can examine one of the older releases still available
    directly from Sun:
    [http://www.sun.com/software/solaris/releases.jsp|http://www.sun.com/software/solaris/releases.jsp]

  • Who has to solve?

    load balancing in two rac issue............who need to solve
    is it dba or architect level?
    who has decide sga_target=
    is it archtiect or dba

    1. RAC DBA is responsible.
    Oracle RAC job role best practices
    There is a perpetual conflict between systems administrators (SAs), who traditionally manage servers and disks, and the RAC DBAs who are responsible for managing the RAC database. There are also clearly defined job roles for network administrators, who are especially challenged in a RAC database environment to manage the cluster interconnect and packet shipping between servers.
    If your DBA is going to be held responsible for the performance of the RAC database, then it’s only fair that he be given root access to the servers and disk storage subsystem. However, not every DBA will have the required computer science skills to manage a complex server and SAN environment, so each shop makes this decision on a case-by-case basis.
    Source:http://searchoracle.techtarget.com/news/2240016536/Understanding-Oracle-Real-Application-Clusters-RAC-best-practices
    2. sga_target = Since it is related to SGA so its sole responsiblity of DBA. If there is any need regarding increasing RAM, CPU Usages, IO issues and if they find out as an OS issue; then SA is responsible.
    Regards
    Girish Sharma

  • Possible to see at a glance who has/has not viewed pdf via the 'Tracker'?

    We are working on setting up procedures for Browser-based reviews. We were hoping we'd be able to see at-a-glance who had/had not viewed or sent back comments, and the date they sent them in the Tracker, but it seems to be just a list of who it was sent to originally. How do you know who has sent comments, other than manually scrolling through all the comments to see people's names?

    Hi;
    No, there isn't a way for you to see anything about who has saved progress.
    Thanks,
    Josh

  • HT3819 How can I transfer songs from my ITunes account to my daughter's who has a different Apple ID but same account info?

    How can I transfer songs from my iTunes account to my daughter's, who has a different apple ID, but the same account information?

    Purchases cannot be transferred between different Apple IDs.

  • Is there a way for an end user to see who has membership in a security group

    Windows Server 2008 R2
    Active Directory Domain
    Windows 7 workstations
    I am looking for a way that my end users can look at a folder security tab and then discover who has membership in the security groups listed.
    Is that possible? Any drawbacks or concerns?

    Hi Tod,
    Based on my research, other than viewing group membership in ADUC, we can use this PowerShell cmdlet
    Get-ADGroupMember GroupName and Net Group GroupName to view members in a group:
    However, these commands can only be used on Domain Controllers or when connecting to DCs remotely. That’s because accounts and account membership are stored on Domain Controllers, therefore we can only view group membership on DCs.
    More information for you:
    Viewing the Direct Members of a Group
    http://technet.microsoft.com/en-us/library/dd391915(v=WS.10).aspx
    Net group
    http://technet.microsoft.com/en-us/library/cc754051.aspx
    Best Regards,
    Amy

  • Who has deleted emails from shared mailbox ?

    Hi Guys,
    We have a shared mailbox and is accessed by more than 5 users.
    Some one did something and the emails got deleted. I see them in recoverable deleted items folder.
    Can anybody let me know how to find out who has deleted them ?
    FYI - we do not have auditing enabled on this mailbox prior to deletion.
    But using the MFCMAPI, I was able to figure out the last modification time (which is same for all the emails in this folder)
    So, I think, if we can find who accessed this mailbox during that particular time, I will be near to solution.
    Can you guys let me know how to check who accessed the shared mailbox at a particular time ?
    Thank you in advance.

    Hello,
    If you did not enable the mailbox auditing logging for the mailbox, I am afraid there is no event to record the operations.
    Mailbox audit logging
    https://technet.microsoft.com/en-us/library/ff459237(v=exchg.150).aspx
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Can't see who has replied to the thread in the forum, its pointess?

    What's the point in creating a system where you can't see who has replied to the thread? Its absolutely F**CKING pointless? Does anyone at Adobe have any brains or are they all sitting with their heads up their backsides?
    Surely before you release such garbage you test for these very simple issues, right?
    osgood_(NOT M Golding) If anyone at Adobe is monitoring this please get my screen named changed to what it was previously as well.

    It needs a 'latest reply' on the posted list page like the old version otherwise you have no idea if anyone has replied to the post or not without opening it.
    Latest reply: May 3, 2014 2:17 AM by . osgood_
    The line below is not that necessary in the order of priority, which for all intense and purposes is quite useless. I don't really care about how long ago something was posted or where it was posted but an indication to show 'updated' posts and by who is vital.
    9 minutes ago in Dreamweaver support forum
    Why do we even need 'Dreamweaver support forum'. We already know that's where we are! I guess a selection of posts from other forums may appear in a 'general' postings list somewhere, but who really cares - if I'm asking a question related to DW that's the forum I'm going to, not a general list as I don't care a monkey knackers what's been posted in Fireworks or InDesign or Illustrator. If I did I'd go to those forums.
    If you are tracking several postings it is going to become hugely annoying for both the person who has asked the question and the people helping the original poster as many replies will potentially go unnoticed and not resolved.
    And what's with the silly horizontal scroll bar being created for long lines of text? That's annoying too.
    Plenty of teething issue you need to get your head around over the next few weeks.

  • My facebook profile photo shows up on an email to a friend who has a yahoo email address, but is not my Facebook friend. All my FB privacy settings are at the max. Is this a Yahoo privacy issue? I don't want my photo to go to other than FB friends.

    I recently sent an email to a friend, who is NOT a Facebook friend, who has a yahoo email account, and my Facebook profile picture appeared next to the email. My privacy settings on FB only allow FB friends to see my photo. Why is another yahoo account that is not a FB friend seeing my profile photo and is there a Yahoo privacy setting that will eliminate this from happening? Thank you.
    == This happened ==
    Just once or twice
    == this week

    Did you check that your Facebook settings haven't changed?
    Facebook may have changed them as part of a software update.
    Is there a link in that email (signature) with a link to that picture?
    Try to send an email to yourself.

  • Is it possible to see who has saved progress on a web form, but not submitted?

    We are using FormsCentral for our application process, and we are allowing applicants to save forms. Is it possible to see who has started a web form, and saved it, but hasn't submitted yet? Maybe by cc'ing the email notificiation they get to an admin?
    We'd like to see who is working on the applications, and also to send them a reminder that they need to complete and submit the form by the deadline.

    Hi;
    No, there isn't a way for you to see anything about who has saved progress.
    Thanks,
    Josh

  • How to find out the user who has created  a new field in the custom table.

    How to find out the user details who has created  a new field in the custom table.
    Thanks,
    Joan

    Hi Jesudasan ,
    You can know the user details with version management.Please find the
    below procedure to know.
    Go to table->Utilities tab->version->Version management->Compare the previous one .
    Hope this solves the issue,Let me know if you have any issues.
    Thanks,
    Rajani

  • How  to find out list of users who has logged into webtools

    Hi All,
    From a database administration and monitoring traffic point of view we want to know who has logged into our web tools web site for a given period.  Is there a easy way to have this information. basically user ID , date and time are info we need. (need all users - with or without orders)
    any ideas welcome.
    Regards
    David

    Hello,
    The easiest way to accomplish this is by creating a report.
    Use the SQL query
    SELECT     UserID, LastVisitDate
    FROM         Users
    ORDER BY LastVisitDate DESC
    And a template that looks something like this:
    <html>
    <head>
    <title>%%ReportName%% - %%Today, {0:d}%%</title>
    %%StyleSheet%%
    </head>
    <body>
    <center>
    <h1>%%ReportName%%</h1>
    <table width=800 cellpadding=1 cellspacing=0 border=1>  
    <tr>
    <td><b>User ID</b></td>
    <td><b>Last Visit</b></td>
    </tr>
    <section name="uservisit">
    <tr>
    <td>%%UserID%%</td>
    <td>%%LastVisitDate%%</td>
    </tr>
    </section>
    </table>
    </center>
    </body>
    </html>

  • Could anyone of you please who has a clean install of Windows 8.1 on the SSD drive look at some settings of certain services (below)?

    Hi everyone,
    could anyone of you please
    who has a clean install of Windows
    8.1 on the SSD drive look at some settings
    of certain services (below)?
    Thank you.
    Prefetch and Superfetch. In registry located on way
    HKEY_LOCAL_MACHINE\SYSTEM \CurrentControlSet\ Control\ SessionManager \MemoryManagement \PrefetchParameters.
    I am interested in EnablePrefetcher and
    EnableSuperfetch REG_DWORD value.
    Just a number in parentheses.
    ReadyBoot. In registry located on way HKEY_LOCAL_MACHINE\SYSTEM \CurrentControlSet\Control \WMI\Autologger\ReadyBoot.
    I am interested REG_DWORD value of
    Start. Just a number in parentheses.
    Run dfrgui command. Go to Change settings and have a look if SSD on which is the system installed is included in regular optimalization schedule.
    Registry can be accessed running regedit command.

    Hi,
    Prefetch and Superfetch means that most commonly used files are stored to disk to be more quickly accessed later.
    For Prefetch:
    Disable Caching: 0
    Cache Applications Only: 1
    Cache Boot Files Only: 2
    Cache Everything (default): 3
    For SuperFetch:Disable Caching: 0
    Cache Boot Processed Only: 1
    Cache Applications Only: 2
    Cache Everything (default): 3
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger\ReadyBoot\Start value means:
    disable: 0
    enable: 1
    For more information about clean installation of Windows 8.1 on SSD, I suggest you read below article:
    Windows 8.1 SSD Settings, Etc.
    http://www.tweakhound.com/2013/11/02/windows-8-1-ssd-settings-etc/
    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Karen Hu
    TechNet Community Support

  • My iPhone was stolen a few days ago. It appears to be offline on the Find My iPhone app. If the person who has it turns it on only for a brief moment and then turns it off immediately, will the location still be found? Once it returns to be

    My iPhone was stolen a few days ago. It appears to be offline on the Find My iPhone app. If the person who has it turns it on only for a brief moment and then turns it off immediately, will the location still be found? Once it returns to being offline will the location still be sent to me? And also, how can I retrieve my pictures from my iCloud?

    Anything is possible.

Maybe you are looking for