Who is accessing my airport

I want to be able to see who is accessing my wireless network. Is there any way to do this given I'm running Airport Express 7.6.3? I'm running OSX 10.7.5 on my Macbook pro. THere was a link posted in a forum dated 2006 for this, but the page in question no longer exists.
-Hugh

is there any way to bump clients off the Wifi without having to bring down the entire thing?
Not easily. If you identified a MAC Address that you did not want to be on the network, I suppose that you could set up Timed Access to never allow that particular MAC Address to connect to your network.
But, you would have to restart the AirPort for the changes to take effect.....temporarily knocking everyone else off for 30 seconds or so.
This would only work for wireless clients, not any Ethernet clients.

Similar Messages

How do I see who is accessing my Airport Express wi fi?

How do I see who is accessing or currently using my Airport Express wi fi?

On your Mac....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express icon
Look for Wireless Clients to see the number of currently connected devices. If you have 2 wireless devices and you see 3 wireless clients, you may have an uninvited guest on your network.

How to make sure I'm the only one who can manage my airport base station using airport utility?

I know we have to use the Airport Utility application to manage the Airport base station in order to create a new network, creating the SSID and chosing the encryption mode and setting the password but how I could be sure I'm the only one who have access to those settings? A user of my network can install the Airport Utility application and change those settings. With other routers like D-Link, to have access to the settings you need to know the admin password to modify the settings. I can't figure out how we can do this with Airport Extreme base station. It's maybe obvious but I'm in the cloud for the moment.

You can set a base station administrator password in order to limit who can administer the base station. With AirPort Utility v6.x, you can set this password on the Base Station tab.

If someone can access my airport timecapsule wireless can they see my backup files too?If someone can access my airport timecapsule wireless can they see my backup files too?

I have 4 iMacs in the office and we are using the Airport Time Capsule 3TB to wirelessly back them up.
It is connected to the main wireless modem router.
I'd like everyone in the office (iMacs, PCs and guests) to connect to the internet through the Airport Capsule. (As I may have to move the main router out into another room to connect it to the built in ethernet cable network).
I'm concerned, though, that anyone who can access the wireless internet functions of the Timecapsule will also be able to see and copy the backup files on there.
Should I be worried?

In normal operation, Macs can only "see" the backups that have been made from their own Mac. They cannot "see" the backups made on another Mac. Try it and see.
With some tricky workarounds that only a devious person would use, it is possible to "see" the main backup file of another Mac......but they would also have to have the user name and password for that Mac.....or actually be using that Mac to see inside the main file and access specific backups.
A bit safer and probably more reliable approach would have a backup hard drive connected to each Mac.
But, even then someone who really wanted the files would probably just take the hard drive.

Who is accessing my network?

I have given the password to the wireless network to a select few. How can I find out who is accessing the network at any given time?
Thanks, Colin

In Airport Utility, under summary, you should see "wireless clients" and a number. Click wireless clients and you will see the addresses. But that is just those at that given time. And you will need to know the MAC address.

How to find out list of users who have access to particulat SID

HI
How to find out the list of users who has access, to a particular SID?
Satish.

jurjen,
Thanks for replying, actually i was trying to navigate and execute the report using, SUIM...
could you help me to find out the list of users who has access to a particular system.. using SUIM.
satish.

How do I access my airport extreme drives online

how do I access my airport extreme drives over the internet?

Here are the basic steps to share an AirPort Disk over the Internet.
Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn,) and then, note the IP address shown.
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Disks, and then, select File Sharing.
Verify that both the "Enable file sharing" and "Share disks over WAN" options are enabled.
Verify that Secure Shared Disks = With a disk password. (Recommended)
Verify that AirPort Disks Guest Access = Not allowed. (Recommended)
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, select the "Personal File Sharing" option. (Note: This option would only allow Mac clients to access the AirPort Disks. If you want both Macs and PCs to connect, you would need to leave this field at its default value and enter the appropriate SMB ports to the mix of ports to be opened.)
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your AEBSn that you wrote down in step 1. In the Private UDP Port(s) and Private TCP Port(s) boxes, type 548. Click Continue.
In the Description box, type a descriptive name like "AirPort Disk File Sharing," and then, click Done.
Click on Update.
To connect to the shared AirPort Disk from a remote location using a Mac:
From the Finder > Go > Connect to Server.
Enter the DynDNS-provided Domain Name or Pubic (WAN-side) IP address of the AEBSn, followed by a colon and the Public port number that you choose in step 11 of the previous procedure. For example: afp://www.mydyndnsdomain.com:8888 or afp://123.456.789.123:8888
Click Connect.
You should be prompted for your user name and password. The user name can be anything you like; the password should be the Disk password for the AEBSn that you created in step 6 previously.
Click Connect.

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

It could be that there's a new source of interference.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

I can no longer access my Airport Express Base Station. When I plug it in, it keeps flashing orange. I cannot see it in the Airport Utility.

I can no longer access my Airport Express Base Station. When I plug it in, it keeps flashing orange. I cannot see it in the Airport Utility.
How do I fix this

If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

List of users who have access to a specific universe

Hello Experts,
We have a requirement to get the list of the users who have access to a specific universe. Please suggest how to achieve this ?
Is there any query to find this list by query builder or query to audit database ?
We are using Business objects 3.1 sp5.
Many Thanks
Ankur

Ankur,
Refer to the discussion below:
how to get a list of reports a user has access to, using either the cms database or the auditing database
Regards,
Ashvin

List of users who has access to current community

Hi,
Is there an API which provides list of users who have access to current community in ALUI? Will there be huge performance impact in retrieving the list of all users who have access to current communty?
Thanks
Sampath

Sorry,
I am not quite following you..
Users can only view a community if the permissions exist for that specific community. I dont understand what do you meant by
"I need to let user type a name and show his/her user ID from the list of users who have access to the current community".
Are you trying to look at user permissions based on a list of communities existing in the portal? The user can't even get to that community if he doesn't have permissions.

How can I list all users who have access to a particular TABLE or VIEW

Hi,
Can someone tell me how I can list all users who have access to a particular TABLE or VIEW.
Abhishek

Hi,
Take a look on this link: http://www.petefinnigan.com/tools.htm
Cheers

I have a requirement where I have to give the list of users who can access a specific computer. I am new with PS. Do you have a script to list users that can access a computer object of AD ?

I have a requirement where I have to give the list of users who can access a specific computer define in AD.
I am new with PS.
Do you have a script to list users that can access a computer object of AD ?
I have executed the following script but it does not give me the access rights of who can access the computer 'computername'
How can i have this information. please help
Import-Module activedirectory
$computer=get-adcomputer "computername" -properties ntSecurityDescriptor
$omputer.ntsecurityDescriptor.Access | select-object -expandproperty IdentityReference | sort-object -unique

I would say that, since the OP has so little info, there are no policies in use. It there were then this question would never be asked the way it is being asked.
I had a client call with a letter from their insurance company; an accountant with malpractice insurance. THey asked the same question inmuch the same way. "What computer can you users access?" The question should be more like
"Do you have a policy that restricts access to computers and do you audit for compliance?"
I have had other clients whose insurance asked the question in that way. It produces a better view of what should be happening and how to show compliance.
I recommend that companies being asked these questions by their legal departments or insurance companies should contract with a god computer security consultant to assist with answering these very tricky questions. Of course if it is just you boss's
curiosity then you may need to discuss his requirements with him in more depth.
¯\_(ツ)_/¯

List of users who have access to multiple mailboxes

Hi,
I got the list of around three hundred generic mailboxes
Please help me with the command which can help me to get the report of all users who has access on those generic mailbox.

Hi,
If you want to export these permissions to a csv file, you can use the following cmdlet:
Get-Mailbox -ResultSize Unlimited | Get-MailboxPermission | Where {$_.user -notlike "NT AUTHORITY\SELF" -and $_.IsInherited -eq $false} | Select Identity,User,@{Name='Access Rights';Expression={[String]::join(‘, ‘, $_.AccessRights)}} | Export-Csv
C:\MailboxAccess.csv -NoTypeInformation
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

How to get the list of users who has access for list of tcodes.

How to get the list of users who has access for list of tcodes.

Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned.

Who is accessing my airport

Similar Messages

Maybe you are looking for