Who is eligible to use the Labview 8 student edition?

Who is eligible to use the Labview 8 student edition? Can an individual who is not in school or affiliated with a learning institution purchase and register it for the purpose of learning at home?

LabTech wrote:
Maybe I'm missing something, but I still am not sure of the answer to my question about the Student Edition . Maybe it hinges on what the word staff means in this case?
I would interpret "staff" in the most general case. If you are employed by an educational institution, and not student or faculty, your'e probably "staff".
The main restriction on the student edition is in its use. You can only use it for personal educational use and not for research. For research in a lab, you need to get the real LabVIEW. See e.g. point #4 in the FAQ: http://www.ni.com/labviewse/labviewse_faq.htm ).
Still, the educational discounts are great (75% on single copy software: http://www.ni.com/academic/edu_dsct.htm ).
Message Edited by altenbach on 09-13-2006 10:02 AM
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Who is eligible to use the Labview 8.0 Student Edition

    Who is eligible to use the Labview 8 student edition? Can an individual who is not in school or affiliated with a learning institution purchase and register it for the purpose of learning at home?

    This post was answered here
    Chetan K
    Application Engineering
    NI

  • Labview student edition

    I recently bought labview student edition. How many computers will the license allow me to download to? I want to have it on my school and personal computer.

    This is an excerpt from the general license file previously mentioned: 
    If the SOFTWARE is a student edition (including SOFTWARE acquired
    pursuant to a student install option license), you must (i) be a Student or an Instructor; (ii) have acquired
    a student edition license; (iii) only, if you are a Student, use the SOFTWARE for your personal
    education purposes and not for any other purpose, including research, professional, commercial, or
    industrial purposes; and (iv) only, if you are an Instructor, use the SOFTWARE for your preparation for
    classroom or lab coursework and not for any other purpose, including use in a classroom or lab,
    research, professional, commercial, or industrial purposes. The SOFTWARE may be installed on up to
    three computers. However, only you may use or otherwise run the SOFTWARE, and the SOFTWARE
    may not be run concurrently (i.e., it may only be launched on one computer at a time).
    This agrees with what is mentioned in the README FIRST document for the LabVIEW Student Edition: 
    Installation is
    restricted to your personally owned computer. http://www.ni.com/pdf/manuals/374075r.pdf
    Jeremy P.
    Applications Engineer
    National Instruments

  • Assistance with Printing to Zebra QL220 using the LabVIEW report VI

    I currently am trying to use the LabVIEW report VI to output a formatted set of strings to the above mentioned printer.
    The UMPC hardware that runs the developed application is bare bones XP box and doesn't' have MS office installed
    I use the LV new report set to a standard report and  successfully set orientation to portrait or Landscape, set margins and set report fonts and headers.. However  in sending the text strings to this label printer (labels are 45mm X 60mm) I find that that two issues arise.
    1. Printing out double labels. The pagination fails and prints a blank label after each print when text is output.  However if I disable all headers and body text (i.e blank label print). This pagination works fine.?
    2. The formatting of the information on the page reliably, I currently use inserted blank spaces, is there a better way?
    I thought, perhaps I should try using the ZLP programming language, but then not sure how to I send it to a USB printer? Has any one had any experience with this and these label printers ?  
    Thanks
    Greg Nicholls

    hi all
    i am C sharp programer
    and i have zebra QL 220 plus
    and roll type is 42X20mm
    and i have the zebra sdk
    and i create mobile application in C# smart device
    and i tring to connect to printer from my application by bluetooth
    in sdk i got this and use
    using System;
    using ZSDK_API.Comm;
    using System.Text;
    using System.Threading;
    // This example prints "This is a ZPL test." near the top of the label.
    private void SendZplOverBluetooth(String theBtMacAddress) {
    try {
    // Instantiate a connection for given Bluetooth(R) MAC Address.
    ZebraPrinterConnection thePrinterConn = new BluetoothPrinterConnection(theBtMacAddress);
    // Open the connection - physical connection is established here.
    thePrinterConn.Open();
    // Defines the ZPL data to be sent.
    String zplData = "^XA^FO20,20^A0N,25,25^FDThis is a ZPL test.^FS^XZ";
    // Send the data to the printer as a byte array.
    thePrinterConn.Write(Encoding.Default.GetBytes(zplData));
    // Make sure the data got to the printer before closing the connection
    Thread.Sleep(500);
    // Close the connection to release resources.
    thePrinterConn.Close();
    } catch (Exception e) {
    // Handle communications error here.
    Console.Write(e.StackTrace);
    // This example prints "This is a CPCL test." near the top of the label.
    private void SendCpclOverBluetooth(String theBtMacAddress) {
    try {
    // Instantiate a connection for given Bluetooth(R) MAC Address.
    ZebraPrinterConnection thePrinterConn = new BluetoothPrinterConnection(theBtMacAddress);
    // Open the connection - physical connection is established here.
    thePrinterConn.Open();
    // Defines the CPCL data to be sent.
    String cpclData = "! 0 200 200 210 1\r\n"
    + "TEXT 4 0 30 40 This is a CPCL test.\r\n"
    + "FORM\r\n"
    + "PRINT\r\n";
    // Send the data to the printer as a byte array.
    thePrinterConn.Write(Encoding.Default.GetBytes(cpclData));
    // Make sure the data got to the printer before closing the connection
    Thread.Sleep(500);
    // Close the connection to release resources.
    thePrinterConn.Close();
    } catch (Exception e) {
    // Handle communications error here.
    Console.Write(e.StackTrace);
     and once i use ZPL method it print 17 barcod always with 16 blank Patches (labels)
    and  when i use CPCL method it print 12 BarCode always with 11 blank Patches (labels)
    and i dont know why ?
    it must print 1 Patch (label)
    what i can do  and i dont think there is eny rong with my code
    all waht i want is how i can give Length and width and how much label print coz it is always print 17 or 12 what i can do ?

  • SAP Query (SQ01) who and when to use the report

    HI Experts!!!
    Is there somewhere recorded information:  who and when to use the report from SAP Query (SQ01)?
    Thanks

    Hi
    This topic doesn´t belong to the Service Marketplace Area.
    regards Martin

  • How can I use the LabVIEW Symbol Editor as a Sub-VI?

    How can I use the LabVIEW Symbol Editor as a Sub-VI?

    mc-hase wrote:
    > Thank you for your ansver.
    > That means that you see no possibiltiy to use the built in window? (I
    > think the built in window is programmed with LabVIEW as well...)
    The icon editor at least up to version 7.0 of LabVIEW is not written as
    VI but directly implemented inside LabVIEW, which is written in C/C++.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Where can I find an example of a vi which reads a xml file using the Labview schema (LVXMLSchema.xsd)?

    Where can I find an example of a vi which reads a xml file using the Labview schema (LVXMLSchema.xsd)?
    �Unflatten From XML� is of little use in parsing because it requires the data type. So it seems that the user has to parse each data value, and then �Unflatten From XML� can help a little.
    I would like to see NI provide a VI for parsing it�s own schema.

    LabVIEW's XML functions are another way of saving data from controls and indicators that is in a more standardized format. If you look at the Unflatten From XML shipping example, it shows taking the data that you would normally send to a Digital Wveform Graph and converting it to XML instead. This data is then unflattend from XML and wired to the graph. Since you know what you wrote to the file, this is an easy thing to do. If what you are looking for is a way to look at any data in any LabVIEW XML file, then you are right, there is not a VI for that. However, I do not believe that that was the intention of the XML functions in the first place.
    By wiriting data in XML, this allows other applications outside of LabVIEW to parse and recognize the dat
    a. In LabVIEW, you would already know the types and can place a generic item of that type. The issue of knowing the type is that you need to know the type of the wire that comes out of the Unflatten function so that the VI will compile correctly. You could always choose a variant value to unflatten and then do some parsing to take the variant a part. Maybe this will help you out.
    See this example for using the Microsoft parser for XML. (http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_guid=B123AE0CB9FE111EE034080020E74861&p_node=DZ52050&p_submitted=N&p_rank=&p_answer=)
    Randy Hoskin
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • Using the LabVIEW (PDS), version 6.0, I cannot find the "Application Builder".

    Hello,
    I use the LabVIEW Professional Development System, version 6.0. However, I cannot find the "Application Builder" in the "Tools" menu.
    How can I install this toolkit from the CD?
    Thanks.

    Hmmm... The App Builder is located in the project folder:
    project\prodisttool.llb\build application.vi
    Make sure this LLB is in your project folder. Also... have you changed the location of your "Library folder" under tools>options ? LabVIEW looks for the project folder inside your "Library folder" whose default is usually something like this on a PC:
    C:\Program Files\National Instruments\LabVIEW\
    So the App Builder should be at:
    C:\Program Files\National Instruments\LabVIEW\project\prodisttool.llb\build application.vi
    If you changed your Library Folder, LabVIEW might not be able to find it, and then you won't see it under Tools

  • Can I use the labview run-time engine 2010 with my LV 2012 program?

    Hi all,
    I will receive the new Labview Developer Suite 2012 DS2 in a few days and
    I am wondering if it is possible to run LV2012 programs on the LV run-time engine 2010 or is it necessary to update all my clients from run-time engine 2010 to 2012?
    Stay Hungry, Stay Foolish
    Solved!
    Go to Solution.

    Hi Benjamin,
    You will not be able to use the LabVIEW 2010 run-time engine with LabVIEW 2012 applications.  Versions of run-time engines need to correspond with the version of LabVIEW that you have installed.
    The following links direct you to our download pages for the run-time engine:
    The 32-Bit Run-Time Engine can be downloaded from our website as can the 64-Bit Run-Time Engine, depending on which version of operating system you, use by clicking the link under "Standard Download".
    Hope this helps.
    Marshall B
    Applications Engineer
    National Instruments UK & Ireland

  • If I buy the Rs. 499 per month option, am i eligible to use the phone gap features up to 1 GB?

    If I buy the Rs. 499 per month option, am i eligible to use the phone gap features up to 1 GB?

    What are "phone gap" features?
    Cloud Plans https://creative.adobe.com/plans
    -Special Photography Plan includes Photoshop & Lightroom & Bridge & Mobile Lightroom
    -Special Photography Plan includes 2Gig of Cloud storage (not the 20Gig of the full plan)
    -http://helpx.adobe.com/creative-cloud/faq/mobileapps.html
    -http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
    -and subscription terms http://www.adobe.com/misc/subscription_terms.html
    -what is in the entire Cloud http://www.adobe.com/creativecloud/catalog/desktop.html
    -http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html

  • How to Run teststand sequence file using the LabVIEW

    Hi
    I want the execute the Teststand Sequence file using the LabVIEW .Net containers.I didnt find out the Execution Parameter in the .Net Container.Do you any suggestion regarding this question.Please let me know.
    Jayavel

    TestStand comes with loads of Operator Interface examples some simple, some full fledged. You can find it in teststand public folder win7 path here:C:\Users\Public\Documents\National Instruments\TestStand 2010 SP1\UserInterfaces
    You can take these examples or use ideas from here, also read the teststand reference manual. It has a section about Operator Interfaces.
    Beginner? Try LabVIEW Basics
    Sharing bits of code? Try Snippets or LAVA Code Capture Tool
    Have you tried Quick Drop?, Visit QD Community.

  • On how many computer can i install labview student edition?

    I intend to purchase labview student edition in a near future, and i was wondering on how many computer may i install it. All for personnal use. I currently have 2 desktop, and one laptop. But I will soon get a surface 2 pro and my laptop start to be old so I will also replace it soon, and I was wondering if I could get the student version work on all those.

    If you are a student, you can get a renewable 6 month license for free here. no need to purchase anything.
    As for the number of computers you can install it, you need to read the Software Agreement. Look for section G(1). The software can be installed on up to three computers but can be used only on a single computer at any given time. If you get a new computer, just deactivate on the computer to be retired and activate on the new computer.
    LabVIEW Champion . Do more with less code and in less time .

  • Labview student edition restricted for sale in uk

    Hi,
    My 30 days trial version is run out, but I need to do more practice on labview. I ordered labview student edition using pearsoned uk and they replied back saying this item is restricted for sale in uk, try ordering from usa supplier.
    Are there any suggestions??
    Best regards
    Solved!
    Go to Solution.

    John - I'm glad to hear you've ordered LabVIEW. Let me know if there's a problem with Journey Ed. If the same thing happens (which I'm pretty sure shouldn't), I'll put you in contact with our sales guys. I'm pretty sure we're allowed to sell it in the uk
    Guru - a bit of advice.. if you're going to be doing something illegal with one of our software products.... Don't talk about it on our forums!!
    Rico P

  • I have the Cs5 student Edition of Adobe Web and design, do I have to upgrade to a full?

    I'm close to graduating and I plan on getting CS6 before I graduate so I can get a student discount, but will I have to upgrade to a full verson of the sofeware once I gradate? If so how much is that going to cost? Will I be able to use the CS6 student for commercal use so I can work at a job/office? Can you please tell me? I really need to know this!

    You can continue to use your Student Edition after your graduation for any legal purpose. As a student you can purchase a new version of CS 6 Student programs. There is no upgrade from one student edition to another. You can of course, upgrade a student version to a non-student version, but the cost for doing so is ussually much more expensive than a new student version, so take advantage of your student status while you can.

  • I already have adobe digital editions on my mac pc and download books from the library to my android e-reader. Can I use the same digital editions on my ipad air, or do I need to load a different one onto my ipad?

    I already have adobe digital editions on my mac pc and download books from the library to my android e-reader. Can I use the same digital editions on my ipad air, or do I need to load a different one onto my ipad?

    Try following forum:
    Adobe Digital Editions

Maybe you are looking for