Who is using a Macbook Pro Retina with Bootcamp Windows 7?

Have you also problem with left click mouse that it sometimes not respond?
bootcam trackpad driver are installed correctly
when i try CTRL key hold down and left click its bader then left click alone without CTRL key
when i deinstall apple mouse driver and take windows standard mouse driver left klick works but right click and 2 finger scrolling dont working.
what can do, think is no hardware problem then, or?

Similar Messages

Trackpad Problem on MacBook Pro 2011 with bootcamp windows 7

I am running Windows 7 in bootcamp on my 13 inch MBP 2011.
I am really pleased how smooth the installation went and everything so far works as it was on my old windows mashine.
Just the trackpad is not running very smooth.
I reduced the scrolling down speed so the scrolling with two fingers is quiet alright now. But I have a problem with this touch to click function. Very often when I write I touch the trackpad with the palm of one hand and this results in actions like my text is continued in another line or suddenly whole paragraphs are highlighted or any other odd behaviour.
I thought to take the touch to click function off but I can't even find the setting in the windows control panel.
There are only the pure standard driver settings available in the control.
Can anybody tell me if there is a solution? Actuallly I like this touch to click, it's working very well when I use the trackpad. I know in other machines you can set a function that it's regonized if you put your finger on a trackpad or it's your palm whilst your writing, or the trackpad disables itself when the keyboard is used.
Is there maybe a better driver for the new MacBook trackpad under windows seven...or do I even have maybe a wrong driver onboard?
Thanks for the help!
Greetings from Melbourne
Message was edited by: Kattinka07
Message was edited by: Kattinka07

Hi psheraton,
I have found now some setting so that I can first at all live with it. Nevertheless i would be very thankful when Apple would work the touchpaddriver over so that it works smoother. Its such an nice device and the big touchpad is great but its realy working very poor under bootcamp.
Maybe you try my settings:
First at all start bootcamp from windows system, and go to the trackpadsettings. Take out the touch for klick. You can forget working with this as when you write it just hops wherever it wants.. as I wrote before, youre suddenly write on in a completly different paragraph...that impossible to use with this settings.
Its a shame as acutally using this touch to click in other applications than writing is very smooth and good.
Other notebooks having an automaticle regonizion function which notices when your accidently put your wrist or palm on the touchpad whilst using the keyboard. Thats certanly what is needed here es well, especially because of the huge touchpad.
Next you have to go to the windows mouse driver which is not in bootcamp but in the standard Windows system settings and adjust the scroll speed down to 1 on each of the two functions there.
This then takes the overdose of speed away when you use two fingers on the touchpad to scroll.
Having it set to more than 1 is not usable either.
These are the setting how I have build myself a workaround for the moment.
But as I said...please please Apple work at this touchpaddriver together with Microsoft to get more out of this wonderful trackpad.
Hope this helps you liking your device a bit more....only Apple could help us further now...

Please, help! After upgrading to Yosemite, my dock has disappeared, along with the dashboard and the wallpaper! Can anyone help? I'm using a MacBook Pro, retina, bought it last year.

Please, help!
After upgrading to Yosemite, my dock has disappeared, along with the dashboard and the wallpaper! Can anyone help? I'm using a MacBook Pro, retina, bought it last year.
Thanks

Have you been trying to download from the app store? Did you get a message?
As a suggestion, you might go to an Apple store (genius bar appointment) for help. As far as I know, there should be no charge.
Barry

Is there anyway to have a 10key number pad on my Macbook Pro Retina with Mountain Lion?

Is there anyway to have a 10key number pad on my Macbook Pro Retina with Mountain Lion?
I have a separate keyboad that does this for me but I do not want to have to pack it with me on my trip. Please help.

Just buy a numeric keypad that connects to a usb port. I use a 7+ year old kensington that has a 2 port hub built into it.

FaceTime on macbook pro retina with Mavericks

I have just bought a 15" macbook pro retina with Mavericks and FaceTime has never worked. My account works fine on my iPad and iPhone but macbook version just won't connect and says 'FaceTime call failed. Can anyone help?

Hello there, alparkinsonpm.
The following Knowledge Base article offers up a few good steps for troubleshooting FaceTime on your Mac:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
If you encounter issues making or receiving FaceTime calls, try the following:
Verify that FaceTime is enabled in FaceTime > Preferences.If the issue persists, or if you see the message "Waiting for Activation", try toggling FaceTime off and then on.
Verify that the Date, Time, and Time Zone are set correctly:
From the Apple () menu, choose System Preferences > Date & Time > Date & Time.
Enable "Set Automatically".
Click the Time Zone tab and confirm the closest city is correct.
Verify that both parties are connected to an active broadband Internet connection.
See Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection.
Consult Using FaceTime behind a firewall for necessary ports to open in firewalls, security software and routers.
If you encounter issues using a Wi-Fi network, use standard Wi-Fi network troubleshooting to resolve interference and other issues.
Verify the phone number or email address being used is the correct one activated for FaceTime.You can verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
Verify that both parties have installed the latest software updates for their Mac and/or device. See:
Mac OS X: Updating your software
iOS: How to update your iPhone, iPad, or iPod touch
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

MacBook Pro Retina with a 500gb hard drive - 400gb storage space?

I have a MacBook Pro Retina with a 500gb hard drive. I recently deleted a windows 8 partition, and now my macbook says its total storage capacity is 399.42gb. Is this normal? Or am I missing 100gb storage space?
When I deleted the partition through boot camp, there was an error, but the boot camp partition seemed to have been deleted completely. I ran disk utility repair and single user mode command prompt /sbin/fsck -fy to make sure my disk was properly partitioned, but it still shows 399.42gb total storage in my "About This Mac".

You did not remove your Windows partition correctly. You need to remove it using Boot Camp Assistant. If you cannot then you will need to repartition the entire drive back to a single partition/volume.

I use a macbook pro retina. before i upgraded to maverick my windows stayed the way i put them. now after upgrade i have to resize every time i change the window. i use a 32in. monitor and use it full screen.

I use a macbook pro retina. I use a 32 in. monitor and use it full screen. I size the screen manually. Since i upgraded to maverick, I have to resize the screen each time I change windows.Before the upgrade the screen stayed where I put it.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

TS3850 What if ingesting from DV tape to FC X using the Macbook Pro Retina which lacks a firewire port

What if ingesting from DV tape to FC X using the Macbook Pro Retina which lacks a firewire port

I have used it quite a bit for connecting to external drives, etc. with no problems. Have not done a tape ingest as we don't have tape based cameras to work with any more. It appears to emulate a FW800 port perfectly.
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=885718&Q=&is=REG&A=detail s
MtD

HT5219 Connecting macbook pro (retina) with a 27" imac.

I am having trouble finding information on how to connect my Macbook pro (retina) with my imac 27" using a thunderbolt cable. I know that it is possible but have been unsucessful so far.
Any help would be greatly appreacted!
Cheers

You did not remove your Windows partition correctly. You need to remove it using Boot Camp Assistant. If you cannot then you will need to repartition the entire drive back to a single partition/volume.

How do I use my Macbook pro retina display as a monitor for a PC?

How do I use my Macbook pro retina display as a monitor for a PC?

MacQueries wrote:
How do I use my Macbook pro retina display as a monitor for a PC?
Unfortunately, that is not possible. The computer only can "output" your display image, it cannot "input" an image from an external computer and display it on your MacBook's retina display.

Can i use a macbook pro keyboard with lighted letters with my macbook early 2008

i need answers!!!!!!can i use a macbook pro keyboard with lighted letters with my macbook early 2008

No, the MacBook does not have the hardware on the logic board needed for the lighted keyboard.

Why does my new MacBook pro retina with 16gb ram keep randomly freezing

Why does my new MacBook pro retina with 16gb ram keep randomly freezing

Hi ..
A new Macbook Pro should not randomly freeze.
You have 14 calendar days from the time your items are delivered to initiate a return as noted here.

HT4818 why doesnt the new macbook pro come with the windows installation disc?

why doesnt the new macbook pro come with the windows installation disc?

Because it is a Microsoft product. it must be purchased separately.

Using Macbook Pro Retina with 2011 iMac

About to purchase a new Macbook Pro Retina and hope to use my existing 2011 iMac as an external display which I believe is possible with this model. If it is, which cable will I need? Thunderbolt?
Thanks

Here is the Target Display Mode information:
http://support.apple.com/kb/ht3924
http://support.apple.com/kb/PH14264
Note that a Thunderbolt port will act as a minidisplay port when required.
Ciao.

Macbook Pro Retina with Samsung 2053BW

I recently bought a Macbook Pro Retina that I was planning to use with my Samsung 2053 22" monitor (1650x1050) and bought a MiniDisplay Port aswell.
However I can not seem to get this monitor to work with the Macbook Pro.
The Samsung monitor works fine with my windows desktop and has done so for years.
I also went to the local applestore here and got them to test both my MiniDisplay Port with an external monitor with my DVI-D cable aswell.
They did not test it with my Macbook Pro Retina as I did not bring it, but will most likely go and get them to test that also.
Though I think the problem is with the compatability between the macbook and the samsung display.
Does anyone have anything else I can try or suggestions for my problem? I have also tried resetting the pram without any results.

You did not remove your Windows partition correctly. You need to remove it using Boot Camp Assistant. If you cannot then you will need to repartition the entire drive back to a single partition/volume.

Who is using a Macbook Pro Retina with Bootcamp Windows 7?

Similar Messages

Maybe you are looking for