Who knows - Has Oracle plan to make 9i on Solaris Intel x86 in the future?

Now Sun continue support of Solaris Intel, But Oracle release only 8.1.7 exist.
Any comments,please

Hi again,
assumption proven ;-)
full details from Oracle below
HTH,
Peter
Applies to: Oracle Server - Enterprise Edition - Version: 10.2.0.1
SymptomsWhile installing Oracle10gR2 on a Solaris 10 x86-64 server, Oracle Universal Installer (OUI) reports the following errors while checking the kernel parameters:
shmsys:shminfo_shmmax=4294967295 found no entry . Failed <<
shmsys:shminfo_shmmni=100 found no entry . Failed <<
shmsys:shminfo_semmni=100 found no entry . Failed <<
shmsys:shminfo_semmsl=256 found no entry . Failed <<
The overall results of this check is Failed.
The kernel parameters do not meet the minimum requirements
CauseOUI is looking at /etc/system to check the kernel parameter settings, but this file is not used (by default) in Solaris 10
OUI should check the kernel parameter settings using the resource control utility ( /bin/prctl )
SolutionTo implement the solution, please execute one the following steps:
1. Verify that the kernel parameter settings are correct using the resource control utility ( /bin/prctl ) and then start OUI like this:
./runInstaller -ignoreSysPrereqs
OR
2. Include the recommended kernel parameter settings in the /etc/system file and start OUI as normal:
./runInstaller

Similar Messages

  • Does Apple plan to make an iPod Touch 5th Generation in the future?

    I have not seen news that Apple plans to make a fifth generation iPod Touch. I am wondering if anyone has news that can help? I heard that Siri will not be included. Is it true? Will they have 3G or 4G like the iPad? Thanks a lot!

    1D Apple User wrote:
    I have not seen news that Apple plans to make a fifth generation iPod Touch.
    That's because Apple has not made any announcement about any such product.
    It is against the rules of this forum to speculate about future products.

  • Does Apple plan to add a delete key to iPad in the future?

    Does Apple plan to add a delete key to iPad in the future?

    There already is a back-delete key - if you mean forward delete key then nobody on here will know until if/when Apple announce something. If it's something that you'd like then you could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

  • Oracle 9 for Solaris (Intel) x86?

    Did oracle drop support for Solaris (Intel) x86? I run a shop with a large scale intel server running Solaris 9 (x86) and would like to try out Oracle 9i on it.
    Please advise: [email protected]
    Thanks!

    You can find information about Oracle product certifications here,
    http://otn.oracle.com/support/metalink/content.html
    You can also find information about desupported platforms in the same place. This link is available from "Get Support" navigation element on OTN home page.

  • Searching Oracle 8.1.7 Client for Solaris on x86/Intel

    Hi all,
    I need an Oracle client 8.1.7 running on a Sun Solaris on a Intel/x86 chipset (in VMware)
    Exists there any location to download this client?
    thanx for help!
    Andreas
    Salzburg, Austria

    Are there plans to have a Solaris x86 version downloadable on OTN? I am making the OS decision for a new development server. I would like it to be Solaris x86 but if Oracle is a no-go on Solaris x86, I will have to use Linux or... hate to say it... M$

  • Is it Possible to install oracle 9i  32 bit on Sun Solaris Intel Edition

    Dear OTN Members ,
    It is possible to install ORACLE 9I Sun SPARC Solaris (32 Bit) on
    Sun Solaris Intel Editon 2.8 . Please inform me on
    email :-
    [email protected]
    [email protected]
    Thanking You
    Piyush Patel
    - Server name :- pi.com
    - Filename
    - Date/Time
    - Browser + Version : Netscape 4.7
    - O/S + Version : Sun Solaris Intel Edition 2.8

    857211 wrote:
    I just need some advice on installing oracle 11gWhat part/product of "oracle 11g" exactly?
    Installation Guides should be clear enough, if read. Also read Release Notes for additional support/unsupport info.
    http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
    http://docs.oracle.com/cd/E11882_01/install.112/e24187/pre_install.htm
    However the Installation Guide for Database Client adds:
    "Note: Oracle provides 32-bit (Windows x86) and 64-bit (Windows x64) versions of Oracle Database Client. _Oracle certifies 32-bit Oracle Database Client on Windows x64_." (underline added)

  • How to Reorganize CSM200 Shared Storage in Solaris 10 x86 Oracle 10gR2

    I could use some guidance from those who are more experienced in RAC administration in a Solaris environment with ASM. I have a three-node RAC with Oracle 10gR2 instances on top of Solaris 10 x86 where the shared storage is a Sun CSM200 disk array which looks like a single disk to the rest of the world. I'm not very familiar with the CSM200 Common Array Manager but I do have access to use it.
    During initial setup, I followed the Oracle cookbook and defined a storage slice for each of the following: OCR, OCR mirror, three voting disks, and +DATA, for a total of six slices. I brought up the RAC and we've used it for a couple of weeks.
    This is a Dev and QA environment, so it changes pretty fast. The new requirement is to add a +FRA and to add a mount point for a file system on the shared storage, so that all three Oracle instances can refer to the same external table(s).
    However, I've already used all the available slices in the VTOC on the shared logical drive. I'm not sure how to proceed.
    1) Is it necessary to use the CAM to create two logical disks out of the single existing logical disk?
    2) If so, how destructive is that? I don't need to keep the contents of the database, but I do not want to reinstall CRS or ASM or the DB instances.
    3) Is it possible to combine the OCR and its mirror on the same slice, thus freeing a slice for reuse?
    4) Is it possible to combine all three voting disks on the same slice, thus freeing two slices for reuse?
    Edited by: user12006221 on Mar 29, 2011 3:30 PM
    Another question: Under 10.2.0.4, is it possible for the OCR and voting disks to be managed by ASM? I know it would be possible under 11g, but that's not an option as I am trying to match a customer's environment and they aren't going to 11g any time real soon.

    What you see is what happens when the Java runtime running on Solaris 10 x86 tries to load a library which is compiled for SPARC.
    Because of the native parts in SAP GUI for Java, compilations and installers are required for each OS - HW combination.
    The supported platforms can be seen in SAP note 954572. For Solaris only SPARC is currently supported.
    Because of the effort needed for compiling, testing, support etc. it is required to focus on OS - HW combinations widely used on desktop machines and Solaris 10 on x86 currently does not seem to be one of those.

  • How do I purchase music - I have registered but dont know where and how to make a purchase

    How do I purchase music - I have registered but dont know where and how to make a purchase

    Open itunes.
    Go to the itunes store.
    Find whatever you like.
    Click "buy"

  • Who knows the price of 865PE - PFLSR(P-series)??In Malaysia or Singapore...

    i'm looking this mainboard for a while, but i still don't found it.....who knows where to buy in Malaysia or Singapore?and what is the price?

    Hi xiangxxx88,
    I wondering if you are trying to get the price of PE-PFISR or PE_PLS but you can try to go to http://www.hardwarezone.com.sg > price guides > Pentium 4 motherboards or you can direct download their most updated price list from hardwarezone Singapore or Malaysia.
    But if I'm not wrong, the PE-PFISR is not yet in Singapore but I know that there's 1 shop who may have direct shipping from Taiwan(maybe...) as they tends to get the Platinum Series before many others 2 months ago. The shop is at Slim Lim Square, 6th Floor just directly beside the escalator.

  • Oracle 10(10.1.0) on Solaris 5.10 Intell

    Hi!
    I have installed oracle 10g(10.1.0) under solaris intel 5.10,at final stage of installation, while linking the files i receive this error
    error:-unable to find make utility in location /usr/ccs/bin/make
    i press ignore button 4 to 5 times. then it display installation successfull.
    then i started $dbca & every thing goes fine but at 12/12 step it shows a HTML page to save ,i save it but database creation does not apper. i tryed all my possible ways.
    could u suggest me what i have missed.i have started installation with this command
    $./runInstaller -ignoreSysPrereqs &
    thanks n best regards.
    viq
    Message was edited by:
    user557218
    Message was edited by:
    user557218

    At first I need to say you did at least two mistakes.
    1. You executed runInstaller with -ignoreSysPrereqs
    2. You ignored the (very important) error messages
    According to error message that you got I belive that your OS is missing required packages important for succesful install (probably third mistake).
    To check whether all required packages are installed execute following command from shell:
    pkginfo -i SUNWlibms SUNWtoo SUNWi1cs SUNWi15cs SUNWxwfnt SUNWxwplt SUNWmfrun SUNWxwplr SUNWxwdv SUNWgcc SUNWbtool SUNWi1of SUNWhea SUNWlibm SUNWsprot SUNWuiu8Install the missing packages.
    Then execute (as oracle) $ORACLE_HOME/bin/relink all command.
    Hope that helps.

  • Not able to create database in Solaris 10 x86 Oracle 10.1.0.3

    I have installed Oralce 10.1.0.3 in Solaris 10 X86 using the procedure given without creating the database.(Installing the binaries)
    Hardware:Sun fire V20z.
    When i tried creating Database using DBCA,it was throwing lots of error.
    The errors are:
    1) ORA-03113: end-of-file on communication channel
    2) ORA-03114: not connected to oracle
    3) ORA-27100: shared memory realm already exists.
    Any help on creating a database in Solaris 10 x86 Oracle 10.1.0.3
    Thanks in Advance.

    Hi.
    Are You read documentation ?
    [http://download.oracle.com/docs/cd/E19680-01/html/821-1255/babhabac.html#z40000471052274]
    Guidelines for the /globaldevices File System
    Oracle Solaris Cluster software offers two choices of locations to host the global-devices namespace:
    A lofi device
    A dedicated file system on one of the local disks
    This section describes the guidelines for using a dedicated partition. This information does not apply if you instead host the global-devices namespace on a lofi.
    The /globaldevices file system is usually located on your root disk. However, if you use different storage on which to locate the global-devices file system, such as a Logical Volume Manager volume, it must not be part of a Solaris Volume Manager shared disk set or part of a VxVM disk group other than a root disk group. This file system is later mounted as a UFS cluster file system. Name this file system /globaldevices, which is the default name that is recognized by the scinstall(1M) commandSo:
    >I have mounted one (1) common 2gb LUN for both the nodes, so it is creating the problem...?
    It source of problem.
    Every node require have it's own separate slice for globaldevice.
    Shared Lun can be mounted with option global for access from both nodes at same time, but it will be second step - configure data-services.
    Regards.

  • Oracle 10g (10.1.0.2) for Linux x86 missing from download page?

    Hello,
    Why isn't there a download link to Oracle 10g (10.1.0.2) for Linux x86 on the 10g download page?
    And what's the difference between 10.1.0.3 and 10.1.0.2?
    Thanks

    Hi,<br></br>
    <br>The level of one release is different with plateform.
    On the Oracle Database 10g Downloads you can find only final release, and not intermediare patch.</br><br>For example, the 10gR1 for Linux x86 is 10.1.0.3, and for Windows 32-bits this is 10.1.0.2, after what you can upgrade to the last patchset.
    </br>
    <br>Nicolas.</br>

  • Oracle 10g Installation nn solaris 10 X86

    I have installed Oralce 10.1.0.3 in Solaris 10 X86 using the procedure given without creating the database.(Installing the binaries)
    Hardware:Sun fire V20z.
    When i tried creating Database using DBCA,it was throwing lots of error.
    The errors are:
    1) ORA-03113: end-of-file on communication channel
    2) ORA-03114: not connected to oracle
    3) ORA-27100: shared memory realm already exists.
    Oracle says nothing to do with Oracle 10g,Check the OS.
    Any help on creating a database in Solaris 10 x86 Oracle 10.1.0.3
    Thanks in Advance.

    check your /etc/system and init.ora
    did you set up kernel parameters for oracle in /etc/system?
    something like this:
    set shmsys:shminfo_shmmax=0xffffffff
    set shmsys:shminfo_shmmin=1
    set shmsys:shminfo_shmmni=4096
    set shmsys:shminfo_shmseg=100
    set semsys:seminfo_semmni=4096
    set semsys:seminfo_semmsl=4096
    set semsys:seminfo_semmns=1000
    set semsys:seminfo_semopm=100
    set semsys:seminfo_semvmx=32767
    the interesting parameter is
    set shmsys:shminfo_shmseg=100 - that is maximum amount of oracle processes system can have, if you have something like processes=150 in init.ora, database won't start.
    read oracle installation manual on how to set these parameters for a particular machine and database

  • OCIEnvCreate fails with -1 return code on Solaris 9 x86 with Oracle 10g

    Hi
    OCIEnvCreate function is failing with -1 return code on solaris 9 x86. The database I use is, Oracle 10g release 1. I tired to connect with sqlplus and am able to connect to dataserver. Why does OCIEnvCreate fails? Can someone help me in this regard.
    Thanks

    Can place the sample code.

  • Does anyone know if Apple has any plans to create an electronic medical records (EMR) program? And if not, who do I email to suggest just that as a new market in desperate need of some new innovation?

    Does anyone know if Apple has any plans to create an electronic medical records (EMR) program? And if not, who do I email to suggest just that as a new market in desperate need of some new innovation?

    There already are some tools in the App Store (eg. My Medical - https://itunes.apple.com/us/app/my-medical/id347860026?mt=8).
    If you mean something that would interact directly with a Hospitals main system or such, I don't know of any.  There are numerous companies now selling and setting up central records systems around the country, but I don't know of any that are working on companion patient tools yet.
    Some charity and non-profit companies, like MedicAlert Foundation are working on such things and may have mobile apps on their radar, as funds allow them to develop such thing.  MedicAlert already offers an EMIR service online, but no standalone mobile app for it yet (you manage it via their web portal).
    Epocrates (owned by Athena Health) might also have something in the works, or at least an interest in such a thing.

Maybe you are looking for

  • Screen brightness no longer works

    never mind... glitch in Windows. Closing the screen and reopening solved it. Originally I posted a question about why my screen brightness wasn't responding any more. The HP service responded to my Fn+ key strokes by showing the brightness bar on the

  • Syncing Apps from iPhone to iTunes with folder grouping

    Hi, I have close to 200 apps on my iPhone structured into approx 50 folders. These apps are downloaded firectly from iTunes (via wifi). Now, i want to sync them to my PC via iTunes. I used the option "Transfer purchases" for that. But the folder are

  • QBE filter criteria in adf richtable disappears

    Hi, i use jdeveloper 11g (11.1.1.0.2) with ADF BC and have the following Problem: I have a table with enabled builtin filtering. The table is contained in a page fragment of a taskflow. At runtime I am doing the following: 1) I submit a filter criter

  • E7-00 AGENDA

    I think they need to fire the people who made the agenda in the nokia E7.  It must be a busines agenda, but the agenda they put in, is so basic that it is offending all the businesscustomers, who buy this divice.  The old communicators, 10 years ago,

  • Handoff is not working on 5s and 101

    I checked my settings for couple of times so I am sure they are fine. But handoff is still not working despite I can pick up the call on my mac and use the instant hotspot.