Who makes LCDs for Apple Cinema HD displays?

Who makes LCD's for Apple 23-inch Cinema HD displays? I do not think that Apple has its own factory to produce LCD's. I think that Apple buys LCD's from other companies and puts them into Apple Cinema HD displays.
I wonder if either Sharp or NEC makes LCD's for Apple. Does anyone know who makes LCD's for Apple 23-inch Cinema HD displays?

Im using a G5 Duel 2.5. I have been trying to use a 42" LCD that supports 1388x768 resolution. My problem is that resolution is much to small for may audio application. Do you know of any work arounds to force an increase in resolution on the LCD side? Possibly a direct box or software that will shrink the windows and allow more information on the screen..[email protected]
G5 Duel 2.5   Mac OS X (10.3.8)  

Similar Messages

  • Can anyone refer me to a good repair facility for an Apple Cinema HD Display 23 in? Like other displays of this model, it has an internal short that causes a flickering display.

    For several years I have had a flickering or black display problem with my Apple Cinema HD Display 23 inch, model M9178LL/A. Like other displays of this model production it has an internal short that causes the flicker and burns out power adapters. I ahve taken it to the Apple store several times and they just kept selling me replacement power adapters instead of fixing the short. At my recent visit, they told me that they no longer support this model and that I have to find a third party repair facility.
    Can anyone refer me to a reputable location who can do the correct repair. There are discussions on the Internet how to work around the short problem with electrical tape on the middle connector pins, or how to open the display to fix it myself, but I do not have the eyesight, skills or equipment to do this correctly.
    Thank you.

    In continuing my research on this topic, I found this article:
    http://support.apple.com/kb/TS5198
    Short version, the 23" Cinema HD is among one of several older "vintage" Apple displays that are no longer supported under Mavericks. No brightness control, and it's likely to not work reliably at all. I can't say why I was able to use it for as long as I did with no problems. I take all this to mean that the display itself works fine, but not with my new MBP Retina.
    Though a tempting excuse to spend another grand on a 27" Apple Thunderbolt display, I opted for a $250 HDMI monitor from Fry's instead.

  • Vista 64 bit Driver for Apple Cinema Display

    I am trying to use a refurbished Apple HD Cinema Display to connect to both my PC and new Mac... it is integral that I can use it with both.
    Any help finding a driver that would work with my Windows Vista 64 bit OS would be much much appreciated... I hate it but I have to work with what I've got!
    Thanks so much!

    I'm looking for the same basic thing....
    Does anyone use a Apple Cinema 23" Display with Vista 64 bit? I'm wondering what video card you use on your PC that supports the 23" Apple display.
    I have a DVIator which worked great with XP, but now that my PC has vista, after the vista boot screen starts to appear, I get a black screen.
    Thanks

  • New Specs for Apple Cinema Displays ???

    I seem to recall that during the WWDC New Specs for Apple Cinema Displays were made public.
    What are these new specs ?
    Or am I mistaken?<<br>
    PowerBook   Mac OS X (10.4.7)  

    Thanks a.brody
    The Online Apple Store and the Apple dealers here in Germany either don't seem to be aware of the new specs or they have a lot of the "older" displays (Brightnes: 270 cd/m2 Contrast: 400:1) left in stock which they want or need "to get rid of".
    I'm thinking of ordering either a 23" or a 30" for my MacPro, but the new spec cinema displays are not yet available here.

  • 23" Apple Cinema HD Display & Mac Pro (Power Button Issue)

    I have a 23" Apple Cinema HD Display (pre-aluminum model) hooked up to a Mac Pro (early 2008 model) via the Apple ADC-DVI converter. This display has two buttons (brightness and power control) which I can enable/disable in the display preferences. They do not react at all when disabled (surprise, surprise) and they do, when enabled (they flash when being pressed). The brightness button brings up the display preferences panel (brightness settings) and makes it disappear, when being pressed again. Up to this point it's all the way I would expect it. But: the power butten flashes too when pressed, but nothing else happens. With my previous Power Mac G5 (Tiger) it used to start/wake the machine or - when awake - put it back to sleep respectively and that is what I basically want it to do with my Mac Pro. Are there any ideas on what I might be missing here? As the brightness button still works as expected, this looks like a software (Leopard) issue to me.
    Oliver

    I think we may have traded posts in another thread about this, but just confirming: you still have the kernel-panic-on-wake issue even after upgrading to 10.5.2? That cleared it up for me.
    If you do ... do you by chance have anything plugged into the MacBook Pro's left USB port when it crashes? You might want to try leaving that port free when the machine is sleeping. A colleague swears that the left port is slightly underpowered, leading to all kinds of USB oddities when used, including kernel panics.

  • Hi, I have a mac pro 2008 and I was wondering if it possible to connect to the apple cinema 27'' display

    Hi, I have a mac pro 2008 eand I was wondering if it possible to connect to the apple cinema 27'' display.

    Yes using an apple 5770 video card and a dual link DVI adapter like the Atlona DP400 adapter.
    Look at the hits in this google search for lots of other discussions on this topic.

  • Just got iMac 21.5 can't get image on Apple Cinema HD display - is it thunderbolt issue?

    I just got my new iMac 21.5" desktop and tried to connect my 21" Apple cinema HD display. I have power to the external display but no image - screen blank. I'm wondering if it is a cable issue even though the adapter I used to connect this monitor to my MacBook Pro fit the thunderbolt port - is this a port or adapter issue?

    In continuing my research on this topic, I found this article:
    http://support.apple.com/kb/TS5198
    Short version, the 23" Cinema HD is among one of several older "vintage" Apple displays that are no longer supported under Mavericks. No brightness control, and it's likely to not work reliably at all. I can't say why I was able to use it for as long as I did with no problems. I take all this to mean that the display itself works fine, but not with my new MBP Retina.
    Though a tempting excuse to spend another grand on a 27" Apple Thunderbolt display, I opted for a $250 HDMI monitor from Fry's instead.

  • I have 2 Apple Cinema LED Displays (no Thunderbolt) and a new Macbook Air (with Thunderbolt).  Is there a way to connect both of these monitor to my Macbook Air?

    I'm trying to use 2 older Apple Cinema LED Displays in a Dual Monitor configuration with my Macbook Air.   It is a new macbook air and supports Thunderbolt.

    Look for minidisplay connectors/adapters that  that fit the inputs on the display, such as this example:
    http://eshop.macsales.com/item/NewerTech/CBLMDPHDMI/
    Ciao.

  • How do I use my Apple Cinema HD Display as my primary workspace with my MacBook Book Pro?

    How do I use my Apple Cinema HD Display as my primary workspace with my MacBook Book Pro?

    In the Arrangement tab of Displays system preference, drag the menu bar to the picture of the other display.

  • Wire that goes from 90W Power Adapter a1097 to apple cinema hd display

    We lost the wire that goes from the 90W Power Adapter a1097 to the Apple Cinema HD Display. Where could I purchase another one and what is the name of this wire?

    The wire that comes from the power supply is tethered, meaning non-detachable, so I don't see how it can be lost. Or maybe I am misunderstanding. Is it the AC cord that is missing, e.g. the one that goes into the wall? That should be a normal IEC 320 C13, which is commonly available. You don't need the Apple one.

  • How do you download iphone 4 apps to a dell pc to make room for apple os update

    How do you download iphone 4 apps to a dell pc to make room for apple os upgrade and transfer it back to the iphone

    Follow the instructions here or here.
    (115390)

  • Will apple really not fix your phone if youve gotten it fixed by someone who doesnt work for apple even if you pay them?

    Will apple really not fix your phone if youve gotten it fixed by someone who doesnt work for apple even if you pay them?

    fionaxo wrote:
    Will apple really not fix your phone if youve gotten it fixed by someone who doesnt work for apple even if you pay them?
    Did Apple tell you that they won't provide support for a device that has had unauthorized service?

  • Does 2011 MacBook Air 11" support the Apple Cinema 30" display?

    Does the 2011 MacBook Air 11" support the enternal Apple Cinema 30" display?
    Configuration
    1.8GHz Dual-Core Intel Core i7
    4GB 1333MHz DDR3 SDRAM
    256GB Flash Storage
    LN

  • Do Window Vista Dirvers exist for Apple Cinema Displays ?

    I am using a 23 inch Apple Cinema Display with a windows Vista box and noticed it is using a generic HD driver. Should I have a diver specific to the ACD? Do any exist?
    Thanks
    Power Book   Mac OS X (10.4.9)   23 inch ACD

    I have one more idea that might help people. This is a theory on my part, so bear with me.
    You can extract all of the files from WinACD and use just the INF files get your monitor to display at the proper resolutions. To do so, do an Administrative Install using the following command:
    msiexec /a <path to msi file>WinACD-0.4.6.msi
    This will extract the files to C:\Program Files\WinACD, but not install the application onto the system. You can then go to:
    Settings - Control Panel - Display
    Click on Settings and then Advanced
    Click on Monitor and then Properties
    Click on Update Driver... and find the acdmonitor.inf file in C:\Program Files\WinACD\noarch.
    Theoretically that should work. I cannot test the very last step for I have it working correctly already.
    I will tinker with this on Vista 64 this weekend and see how to make it work. You should not have to do this with Vista 32. I had to turn of the User Account Control in order to be able to install it. With it on, WinACD says that it could not install because it was interrupted.
    Other OS
    Other OS

  • Best calibrator for Apple Cinema LCD?

    At the suggestions of contributors to this forum, I bought and now am more than half way through Fraser's Real World Color Management. I have found it relatively easy for a novice to understand and am grateful for the guidance to get it. Now, however, I must act on some of the info in the book. A first step is to buy a calibrator.
    Does anyone have experience with a particularly good one? (I have a 23 in Apple Cinema LCD.) I went to the Apple store and the only one they carry gets rather negative reviews. I am willing to pay for whatever is necessary to get something that works superbly.

    X-Rite's Eye One 2

Maybe you are looking for

  • How do I add a new song to an already existing playlist on the new iso7 for iPhone 5?

    I tried to add a new song and I go to playlist, edit and go to song to add and it won't. So confused!

  • Select Query on time stamp.

    Hello Gurus, Please help me in writing a select query with the where condition on time stamp for the field IBSP-VALFR and IBSP-VALTO, with the current system time stamp. I need pick all the values which falls in these two fields with the current time

  • Table: USR02BKP Table has no index

    Hello, During weekly checkdb sheduled jobs from DB13 transaction we are getiing below mentioned warning/error again and again MISSING_INDEX :: Table: SAPDEV.USR02BKP # Table has no index But in Se11 or Sm30 i am unable to fine any table with name USR

  • How do i transfer purchased items to my itunes library?

    Im trying to upgrade and i need to transfer some stuff first.

  • LR4 Sizing a photo in export

    I seem to have problems sizing an image and exporting. Before, I always cropped and rotated my photos in PS, but as I more and more use LR, I am finding problems. When I export, I set my sizes W5400 x H3600 for horizontal and LR4 exports at various s