Who runs this community?

I post a questions, the first reply start off with "You are wasting your time" and clearly does NOT answer my questions. I reply to that saying I have higher expectations for Apple than other cheaper products.
My post gets deleted for not meeting community guidelines, and the above post which INSULTED my initial question, is marked as 'Answered my question'
So my question for this post is - who runs this? Apple or some volunteers? Marking a post as 'Solved Problem' on my behalf that tells me "You are wasting your time" is not usefull!
At this point I'd like to delete the original posit since clearly "I'm wasting my time" on here.
Sheesh!
Mac owner from MacPlus to MBP Retina since 1988

"You are wasting your time" and clearly does NOT answer my questions.
Actually, it does answer your question. Maybe not all that politely, but it is correct. Like virtually any other such device (iPad, Blackberry, Samsung), Apple does not make their own batteries. They get them from the same very few suppliers as everyone else. And like all such "performance" claims by manufacturers, they are based on absolute best circumstances and use. Typical use will not yield those results.
who runs this? Apple or some volunteers?
Apple owns and operates these boards. Other users handle almost 100% of the questions. Rarely will you see an Apple employee posting an answer. Of those, it is almost always one of the hosts explaining something related to the use of these boards, not an answer to a technical question.
Marking a post as 'Solved Problem' on my behalf that tells me "You are wasting your time" is not useful!
Well, only you can do that. No one else, not even the hosts can in any way mark a post Solved or Helpful. Only the person who started a topic can. So in the case of the only other topic under your name, you awarded the Solved and Helpful points. Therefore, your claim of someone else doing so "on your behalf" isn't possible.

Similar Messages

  • Who runs this company and where are they hiding?

    How is it that Verizon has no problem taking your money.......but has no desire to give back what is yours?  I returned something for $265.00 almost a year ago and no credit has yet to be seen.  I have had my service turned off several times and also the $5.00 late fee.  No one.... I mean NO ONE  that I have talked with which includes managers on the phone and managers in the store can handle this problem.  However I keep getting those harassing phone calls and texts about my service being turned off.  I am so tired of being harassed by Verizon not to mention all the time they have taken out of my schedule and my life to stay on the phone to figure things out.  It has been a year gone by and they want me to hold on the phone will they attempt to figure this out....WHO has this kind of time?  How many times do you have to tell someone a story to get things done?  They are harassing me over something that is their mistake......they need to be held accountable and quit harassing people and fix their issues.  Where are the people that wear the pants in this company?  That is who I want to talk to.  Not someone who has no authority to help a customer who is right and they are the ones WRONG.

    I am sorry to learn that you have some unresolved billing concerns Terrina! Your satisfaction & billing accuracy are paramount to us! Please reply to the direct message that I sent you and I will review your account for accuracy
    AntonioC_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Who Runs This Forum

    i am told that this forum is not run by BT. Yet it has the BT logo. And Sages on here post tens of thousands of posts. It's almost like they are employed to do it. What is going on. Come on, this is a BT run forum isn't it?

    This is a customer to customer self help forum posts made here do not go to BT although the forum is moderated by BT not every post is read and posts do not go to BT directly
    this link explains more https://community.bt.com/t5/Announcements-Terms/BTCare-Community-Forums-User-Guidelines/m-p/1375043#...
    Everyone here are BT customer like yourself NONE OF US ARE EMPLOYED BY BT  with the exception of the forum moderators who are the only BT employees here  
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • To the person who runs this Discussion

    I have been unable to find a contact to send you a message.
    On the page of this discussion that lists the headers of all the topics, at the bottom after the last topic on the page, a link is offered named "More". On clicking this, a second page appears (and then later pages), continuing the list of topics. When I select a topic on the second (or third) page and reply to it, I am automatically returned to the first page. I than have to scroll down to the bottom, press the More link again, and hunt for the last topic that I read. If I were on, say, the third page, I have to scroll down twice and press More twice, and so on. Each page is re-downloaded for obvious reasons (given the large amount of traffic on this discussion.) By the time that I reach the third page, it is quite a hunt to find the last topic that I visited so that I can continue to browse. This is inelegant and wastes time.
    In the iMac (Intel) discussion, (also heavily trafficked) the other method of accessing later pages is used. That is, by a button marked Next. Having pressed that, I stay on that second page (or third page) and am returned to it, and do not have the fuss of repeatedly pressing More.
    I have looked at "Your Stuff" but there seems no relevant preference. Therefore, how can I select the second method for all topics.
    Thanks.

    Is it caused by using different tabs to get to the topics?
    First option (Overview tab):
    has this at the bottom:
    I'm guessing that it the 'More' you are referring to?
    Second option (Discussions tab):
    has this at the bottom:
    I've used the Set as default tab option for the Discussions tab for this Forum.
    Regards,
    Colin R.

  • Warning when trying to launch application over mapped drive "We can't verify who created this file. Are you sure you want to run this file?"

    We have 2 load balanced application servers that map drives with programs on them for users from a central server that are giving the warning "We can't verify who created this file. Are you sure you want to run this file?". Basically how it works
    is a user logs in to one or the other application servers (for example, 10.0.0.1 or 10.0.0.2) and runs a log on script that maps an L:\ drive to the users folder on the central storage server (10.0.0.100). When the user goes to launch the .exe from the L:\
    drive it presents that warning.
    I've looked around and have seen recommendations that you need to add the site to the local intranet zone for IE, but when I try to add L:\ it tells me that I have entered an invalid sequence. It appears that you can only put network shares in that location,
    which is not how we're mapping the drive.
    Has anyone run in to this before and knows how to resolve it?
    Thanks!

    Hi,
    A mapped drive letter is not supported so please try to input \\server or \\server\folder to see if it will help. 
    If you have any feedback on our support, please send to [email protected]

  • HT201441 i have iphone that he has a apple acount but i don't now her acount and password because he come's from england and i don't now a person who was this iphone before me.can you help me to find this person

    i have iphone thet he has an apple acount but i don't now her acount and i need help to find a person who was this iphone before me to ask her for a apple acount and password.please help me acount start k,,,,,@k,,,,,.uk if anyone now this person tell me please

    Welcome to the Apple community.
    Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.
    If you have this persons email address, try sending them an email and asking them to remove their ID as described above.

  • SQL2012 Express Error: "insufficient system memory in resource pool 'internal' to run this query"

    I am running the SQL2012 express (version shown below) and get the following error after a day or two of operation. This is a new server 2012 installation.
    source: SQL2012Express  "There is insufficient system memory in resource pool 'internal' to run this query."
    The installed version of SQL2012 express is:
    Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64)   Dec 28 2012 20:23:12  Copyright (c) Microsoft Corporation
    Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
    I read a few of the postings but couldn't determine the exact hot fix or update to run or if I am running the latest already.
    Which .exe file should I run for the update? I downloaded a file called 473913_intl_x64_zip.exe but it said it wasn't tested yet?
    Can I uninstall this path or hot fix if it breaks something?
    What can I do to correct this internal memory error and prevent from happening.
    Thanks
    Morris
    Thank you Morris

    Hi MoCoder,
    According to your description, the error may be occurred by the following possible reasons, for example,
     the ram was be completely used, reached the maximum memory allocation configured values in SQL Server or virtual memory is full and so on. Before you install the related cumulative update of SQL Server 2012, I recommend you do the following
    steps for fixing this error. For example, allocate more memory to SQL Server, kill the unnecessary idle sessions, increase the RAM and virtual memory and reduce the number of users and so on.
    For more information, you can review the following article,
    http://sqlserverlearner.com/tag/there-is-insufficient-system-memory-in-resource-pool-internal-to-run-this-query
    In addition, you also need to check if there is the SQL Server memory leak, most of the memory leaks in SQL Server is caused by 3rd party Dll’s which are loaded in SQL Server process,
     or you enable the Auto Update Statistics Asynchronously statistics option in a database of Microsoft SQL Server 2012.
    For more information, see:
    http://support.microsoft.com/kb/2778088/en-us
    http://mssqlwiki.com/2012/12/04/sql-server-memory-leak/
    Regards,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • Siebdev.exe  - Can I run this in batch mode?

    Just so you are aware, I know nothing about siebel. However, in conjuction with a siebel developer who should know; we are trying to invoke siebdev.exe from a CIB server (jenkins specifically).
    However, running the /batchimport option appears to launch a gui; which I'm fairly sure is causing the app to fail via the jenkins batch job on a windows server (we get an event log application fial)
    Can anyone tell me iif it is posisble to run siebdev.exe silently? or at least so it doesnt fire up the gui?
    Appreciate any help that you can offer.
    Many thanks
    dD

    so, further to this
    I setup a windows schedule job, and that appears to run the job fine.
    However, this runs as my admin account rather than as the service (which doesnt have admin access rights to the machine).....
    Do I need admin rights to run this?
    dD

  • WHO IS this TRUSTED INSTALLER?

    There is no explaination of his/her identity in the properties and I'm usually locked out of the files owned by this user...AND why does he block me out of suddenly newly appointed executionable programs that just appear in my processes?  They are usually
    suspicious looking so I look at the properties and I'm locked out (even though I am an administrator) so I must go through the sometimes un-nerving process of changing ownership and/or deleting "him"...if the process was explained in the properties
    a little better, this would help.  These things get in/past my private firewall daily and it bothers me.  Too much spying crap going on.  And ever time I run a malwarebytes scan there is ALWAYS a search file from IE that pops up as a PUP. I
    don't even use IE at all and I've blocked it in my firewall (?why? who the H is speedbit and do search and why do they change or infiltrate my startpage search engine???) due to my mistrust in the privacy I get when using them.  All of the trojans, worms,
    spyware and malware have come directly from Microsoft.  Why is that and why don't they require my permission to install programs and processes on my computer...and, no they are not coming from updates.
    please address this question clearly and directly and honestly as I'm quite tired of the deception I feel is going on between my computers operating system and my protective programming I'm suppose to feel safe with.

    Thank you for your reply Lewis but yes, I am daily aware of everything going on in regards to new programs, processes etc.  I have Norton Insight and online protection, use malwarebytes and PrivateFirewall.  I have seen AVG try to install itself
    through stealthmode applications but caught it.  I never install anything from 3rd parties and always verify the site before using it.  (ie Adobe updates for instance, I never check the McAvee box nor do I accept toolbars or any ASK products etc
    etc).  Verifiable ?  when the Norton or Malwarebytes detail screen shows the name of the PUP it will show the path as well and this is how I know where it came from.  Usually an IE search program which is really sneaky because I do not even
    use IE yet it gets in anyway.
    My question at hand though is who is this TrustedInstaller and can I edit him off of my properties to allow myself access without it affecting my computer.  I usually notice him/her as owner of MS products that are in the hidden mode and have a lock
    on the icon.  I often notice them when they appear suddenly in a process that wasn't there previously (ie: SPI32.EXE  OR SPA.EXE WHICH IS SPEEDBIT SEARCH ENGINE FOR IE)  GOOGLE is getting to be the same way in so far as introducing new programs
    and processes that are not requested or scheduled...Sorry Lewis but I come from a different generation and have seen the days of respect and privacy and understanding and I believe these companies just assume my generation are too uninvolved to notice. 
    You need to be more assertive with your questions and concerns maybe. Don't let anyone just tell you "it's ok, that just the way it is"  ASK WHY!!!!

  • Are there any Citrix Dazzle users on this community?

    For various and sundry reasons, I need to run certain apps on my Mac mini via Citrix Dazzle where the apps in question live on a Windows Xenapp server. I have two questions about this configuration. Unfortunately, the guy who runs my employer's Xenapp server is cluless about my questions.
    First, when I open an individual app via Dazzle, no problem at all with locating its window. When I have two or more apps open via Dazzle, I can't figure out how to find the windows for the inactive Dazzle apps. For example, if I open apps A and B, when I do work in app A, then I need to return to app B, I can't find app B's window anywhere on my desktop, so my only option is to open another instance of app B which than reveals the window for the first instance of that app. Is there a better way to access open Dazzle apps like I can with apps that run directly from my Mac mini?
    Second, whenever I open Microsoft Remote Desktop via Dazzle, then switch to any other app, when I try to return to the RDP session, it hangs, even though I can easily find it and even if no other Dazzle apps are open. My only option is to force quit the Citrix receiver, then start RDP again and it takes me back to where I was in that session, which is annoying to no end, but better than nothing. Is there some sort of preference I can change that would fix this and the previous problem?
    I am working primarily on a 3-month old Mac mini with the latest of all the software I use and Mac OS X 10.8.3, plus it has an internal SSD. I also have the same two problems on my MacBook Pro, which is roughly 3 years old and also running Mac OS X 10.8.3. Although I am not alone in my office as far as being a Mac user is concerned, my other colleagues who use these apps simply do so by running virtualized Windows on their Macs, but that seems like vast overkill to me, plus I don't own a copy of Parallels or Fusion for my Mac mini.
    If there is a better forum where I can post these questions, please let me know.
    Thanks.

    Citrix has their own forum for Dazzle:
    http://forums.citrix.com/category.jspa?categoryID=174
    You might have better luck getting a quick and helpful reply if you ask there.
    Regards.

  • Users who favourited this also favourited this

    hi i am trying to set up a system similar to amazons, whereby
    when you search a book, it tells you Customers who bought this item
    also bought these items( a list of other books)
    What i am trying to do is have a system which tells you
    "users who have favourited this musician have also favourited these
    artists"...
    At the moment I have a query which takes an artists primary
    id from the url of thier page, and the users primary id who
    favourited the artist, and puts this into a table, so then you can
    call the users fav artists, using
    SELECT *
    FROM artists_fav
    WHERE id_usr_fav=#SESSION.auth.idnumber#
    But im unsure of how to write a query that would take all the
    other artists that a user has, who has favourited "massive attack"
    for example, and present this in a list whereby the artist who has
    been favourited the most by users who have also favourited massive
    attack is at the top, then the next popular is second etc
    here my site
    http://www.musicexplained.co.uk/index_artist.cfm?id_art=38
    and if you would like to test the favouriting system, you can
    use username blanko, and password dranko
    any help here would be MUCH appreciated

    hi, following your advice i have pretty much got this up and
    running, the only thing is, that when i try and run the count
    (bandname_art) as favourite in the query i get an error message
    so
    <!---similar artists--->
    <cfquery name="sim_art"
    datasource="#APPLICATION.DataSource#">
    SELECT bandname_art
    FROM artist_art
    LEFT OUTER JOIN artists_fav
    ON artist_art.id_art = artists_fav.id_artkey_fav
    WHERE id_usr_fav IN
    (select id_usr_fav
    from artists_fav
    where id_usr_fav <> #session.auth.idnumber#
    AND id_artkey_fav = #url.id_art#)
    AND id_art <>#url.id_art#
    </cfquery>
    is fine
    but
    <!---similar artists--->
    <cfquery name="sim_art"
    datasource="#APPLICATION.DataSource#">
    SELECT bandname_art, count (bandname_art) as favourite_count
    FROM artist_art
    LEFT OUTER JOIN artists_fav
    ON artist_art.id_art = artists_fav.id_artkey_fav
    WHERE id_usr_fav IN
    (select id_usr_fav
    from artists_fav
    where id_usr_fav <> #session.auth.idnumber#
    AND id_artkey_fav = #url.id_art#)
    AND id_art <>#url.id_art#
    </cfquery>
    returns the error message of "You tried to execute a query
    that does not include the specified expression 'bandname_art' as
    part of an aggregate function."
    i was wondering there was another way to order by favourite
    count...maybe by using another query in conjuction etc etc
    cheers

  • DBCC CHECKDB failure, SQL 2012, There is insufficient system memory in resource pool 'internal' to run this query.

    Hey, guys!
    Tried to find an answer, but nothing works for me.
    So on one of servers when I am trying to run DBCC CHECKDB throws two errors
    Msg 8921, Level 16, State 1, Line 1
    Check terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors.
    Msg 701, Level 17, State 123, Line 1
    There is insufficient system memory in resource pool 'internal' to run this query.
    This is a VM hosted on Hyper-V server 2012 R2. VM has Windows Server 2012 R2 and SQL Server 2012 Std. VM had 8 GB of RAM, I increased it to 12GB (static, not dynamic), also I increased paging file size in Windows and size of TEMPDB also recreated TEMPDB.
    I also tried to restore the Database, which throws an error from another server. On that server DBCC CHECKDB works fine, but it didn't help - I still receive the same error.  Can you suggest, please?

    Hi,
    I agree with you. It is probably a memory issue. First, we need to verify if it is an OS memory issue or caused by SQL Server itself.
    Need to use Performance Monitor:
    SQLServer:Memory
    Memory
    Dynamic Management Views:
    sys.dm_os_sys_info
    sys.dm_exec_query_memory_grants
    1. Use performance monitor to check OS memory: available memory(MB) and monitor the OS memory status before the query and when running the query. If it does not change, I can exclude the OS memory factor. Then, I can conclude
    this memory issue was caused by SQL Server internal. Also, check if there is Memory leak on your system.
    2. Use the below script in SQL Server Management Studio and Result to Text.
    while(1=1)
    begin
    print getdate()
    print '*****sys.dm_exec_query_memory_grants******'
    select * from sys.dm_exec_query_memory_grants
    print 'DBCC memorystatus'
    dbcc memorystatus
    waitfor delay '00:00:01'
    end
    Then, check SQLServer:Memory-Granted Workspace Memory (KB) when the issue occurs which specifies the total amount of memory currently granted to executing processes, such as hash, sort, bulk copy, and index creation operations.
    And compared with the information got in
    sys.dm_exec_query_memory_grants.
    3. In addition, use sys.dm_os_sys_info
     to identify bpool_commit_target and bpool_commited.
    In SQL Server 2012, the columns have been renamed as
    committed_target_kb and committed_kb.
    committed_kb  represents the committed memory in kilobytes (KB) in the memory manager. Does not include reserved memory in the memory manager.
    committed_target_kb represents the amount of memory, in kilobytes (KB), that can be consumed by SQL Server memory manager. The target amount is calculated using a variety of
    inputs like:
    the current state of the system including its      load
    the memory requested by current processes
    the amount of memory installed on the computer
    configuration parameters
    If committed_target_kb is larger than
    committed_kb, the memory manager will try to obtain additional memory. If
    committed_target_kb is smaller than committed_kb, the memory manager will try to shrink the amount of memory committed. The
    committed_target_kb always includes stolen and reserved memory.
    MSSQLSERVER_701
    http://msdn.microsoft.com/en-us/library/aa337311.aspx
    An in-depth look at SQL Server Memory–Part 3
    http://blogs.msdn.com/b/sqljourney/archive/2013/11/02/10402729.aspx
    INF: Using DBCC MEMORYSTATUS to Monitor SQL Server Memory Usage
    http://support.microsoft.com/kb/271624/en-us
    Hope it helps.
    Tracy Cai
    TechNet Community Support

  • How could I find the SQL statement who get this message ?

    ORA-01555 caused by SQL statement below (Query Duration=11191 sec, SCN: 0x0854.723b9c32)
    ... How could I find the SQL statement who got this message ?
    Thanks, Paul

    ORA-01555 means that the UNDO/ROLLBACK space is not large enough.
    This occurs because the SELECT statement is attempting to read the UNDO, but the UNDO has been released (transactions have committed or rolled back) and reused.
    The following are SOME of the reasons I have seen this to occur:
    1) Updates in a loop, with commits happening in the same loop
    - this will mark the UNDO available quickly and quickly reuse it. Then when the SELECT wants to rebuild a block, the UNDO used to rebuild the block has been reused (solution, make the UNDO bigger)
    2) A SELECT cursor used to control a loop in which updates are performed, and a 'done' flag is marked against the current cursor record, and commits are performed at the end of each loop, prior to fetching the next record
    - same problem as above, but it hits the current process. Same solution
    3) A 'month end' activity spike occurs, and all sorts of transactions create updates. There is a report that reports the activity - amusingly it needs to start at the beginning of all the work and updates periodically by doing a huge SELECT up front. This is then used to drive a loop which attempts to get information from the various transactions that have been updated and committed. After a while, the SELECT gets an ORA-01555
    - same problem as above and same solution. Get a bigger UNDO segment.
    You say this only happens once a month. That should give a hint.
    I wouldn't bother with which SELECT statement, as much as which APPLICATIONs are being run when it happens.
    One way around this - use 10g and set the guaranteed retention period. All sorts of other things will break, by no more 1555. <g>

  • PSE8: Who is this?

    I just upgraded to PSE8 from PSE7.
    I was looking at some pictures in Organizer by selecting a tag.
    I noticed that there was a little 'bubble' over one of the images with
    the text 'Who is This?'. I suspect this may be part of the
    automatic people recognition. But I wanted to check.
    The Auto-Analyzer Options are set to the default, I believe.
    Recognize People Automatically is checked.
    But Analyze All Media in Catalog Automatically is not checked.
    What is happening here?
    fwiw, I did click on the Help in the Auto-Analyzer Options Preferences
    window. For some reason, I can't get the Help for that window.
    Help seems to work ok for other windows, though.
    It opens a browser tab and brings me to the appropriate subject.
    Thanks for any help. This Auto-Analyzer looks interesting.
    But I'd like to understand it a bit better before I go too far.

    Thanks, John!
    Now I'm getting it.
    I ran through a set of images.
    Sure enough as I moved through them the application got
    better and better at suggesting the correct person for the face.
    Pretty cool. My tags are working out fine.
    As Barbara mentioned, I get the little bubble with the 'Who is this?' to
    remind me to run People Recognition on the images.
    I think I will leave that on to remind me.
    A couple more things:
    1. When I start up People Recognition I get my images in a window
    with arrows on the left and right to move back and forth through the set.
    But I can't tell when I am at the end of that set. As far as I can tell the arrow
    is still enabled when I'm at the last image.. It doesn't look grayed out to me.
    So I keep clicking thinking something is hung up. Am I missing something
    on that window that clues me in to the fact that I've reached the end of
    the set?
    2. I think the Analyzer has finished with all my JPEGs. It now seems to be working
    on the handful of .AVI files that I have. Is it my imagination, or does this take a very
    LONG time to complete. I think it has been working on this one .avi file all night.
    And I don't think my files are even particularly large. But of course they are monstrous
    compared to a jpeg.
    Thanks!

  • How is 9iJD able to run this much Faster? Any new concept ur using. Please Tell Us...

    We are very much eager to see the production release of 9iJD. When will it be available for Download?
    How is 9iJD is running this much Faster? Any new concept uve used to develop this. Please let us know the Java Community. Its much faster than any application developed with Microsoft Tools or even VB/VC++...
    Yours,
    Sankar.B

    Please see:
    http://technet.oracle.com:89/ubb/Forum104/HTML/000054.html
    thanks.

Maybe you are looking for

  • Creating a form with radio buttons that users can fill, save, and e-mail back

    Hi all, I am new here, so please forgive me if this answer has already been answered. I have been looking around and still have not been able to find an answer. I have created a pdf in InDesign and opened it in Acrobat to create a form out of that ex

  • 100% mail environment (imap) some attachments arrive in scrambled type unicode others do not (docx and pdf) files.

    I tested this feature by sending a known (problem file) to my gmail as well as a user in the office. I could read it 100% in gmail, then I just forwarded it to the user that couldnt read it orginially and BAM! they could read it?? Keep in mind this w

  • Good receipts output type

    Hi, I am trying to trigger Output type for EDI to generate IDOC - while doing Good receipt against Purchase order. Steps followed to do this - Vendor Parnter functions maintained. Created a PO. NACE for Application 'ME' - Condition record maintained

  • SharePoint Apps not working

    Greetings, I'm having trouble configuring my SharePoint Server 2013 to use apps from the SharePoint app store, and so my developers can ultimately begin writing apps. I've gone through the configuration process here: http://msdn.microsoft.com/en-us/l

  • Cannot print attachments from Outlook 2007

    I have a user who has Outlook 2007 with Acrobat Reader XI currently and wants to print all the attachments within his emails when he prints the email itself. I have also tried Acrobat XI Standard with the same results. After a week or so he stops bei