Who's using my hotspot?

Is there a way to see who's actively using the hotspot on my iPhone 4S (iOS 6.1).
I know it tells me how many people are connected in the blue bar however, I want to know if it's possible to see who they are (and what way they are connected).
Thanks,
TC

People cannot join the network your iPhone created without the password you set, so it has to be someone you gave the password to. The specific feature you describe is not available, but you can suggest it to Apple at http://apple.com/feedback/

Similar Messages

  • HT204023 can I track or access who has used my hotspot connection as mine was "hacked"

    my old iphones hotspot was turned on ( I have no idea why or how I was on holidays at the time) and someone then commenced to use my connection and run up $600+ in data charges.  This phone has never been used previously as a data phone only ever calls and texts ( its like an emergency contact phone only) is there a way to track or uncover who it was that accessed it ( I suspect it was next door) and can the phone be hacked so people can remotely turn such features on as I turned the hotspot connection off and then the next day it was on again... ***!!!

    Someone from outside cannot access that setting. Do you have data turned off? This would be the fastest and easiest way to prevent it, however the only way to have hotspot active is if the carrier supports it. However, that could change if the phone has been jailbroken.

  • How do i find out who is using my airport express?

    I have an airport express to extend my Wifi coverage and i am sure other people who have asked for the password in the past are still using it. Is there a way to see who is using it, when and block people? I could change the password, but I would like to find out first who is using it.

    1) Open AirPort Utility
    2) Hold down the option key on your Mac
    3) Keep holding the option key while you double click on the AirPort Express icon in the center of the AirPort Utility window
    4) Release the option key after you double click
    Something like the example below will appear, with the Summary tab highlighted.....which in this example shows that there are two devices currently connected to the wireless network. If you click on the arrow next to each listing, then more information will be revealed about that particular device.

  • How do i find out who is using my interent on iMac, How do i find out who is using my interent on iMac

    How can i find out who is using my internet connection on other devices, i have tried internet preferences, but it dont tell me who is connected to internet.

    That has nothing to do with OS X or your iMac, if you think someone has been using your Internet connection then you need to turn on the security on your WI-FI router. Please look in the owners manual of your router for instructions.

  • Is there anyone who has used Freescale's SimpleSUB.dll and DEMOJM board?

    Hello,
    I am trying to connect Frescale DEMOJM board over USB connection. I am adding SimpleUSB.dll to my visual instrument thorough .NET constructor node and giving an mscorlib class GUID to the GUID property, than calling OpenConnection method from an invoke node referencing the SimpleUSB reference. But there is no valid connection to the device as DeviceConnected parameter return "False". 
    I am using LabVIEW 8.6 trial, .NET Framework 3.5. So they are up to date I guess. Is there a limitation of these for using .NET dll? And also I can use the dll in Visual C# successfully.
    At first there was another problem using the .NET constructor node in LabVIEW because of Vista OS.  The vi was blocking when i added the node to the vi. I changed the "language & regional settings" to English(USA). The problem seemed to be solved. Can Vista's bug be still a problem?
    Is there anyone who  has used Freescale's SimpleUSB.dll and DEMOJM board with LabVIEW?
    I will be thankfull for your helps.
    Emre

    Hello Anna,
    Here is one of my poor vi trials.   I have also tried putting some conditionals in some other files but it didn't helped.
    http://rapidshare.com/files/176194859/EXTDLL1.rar.html
    Here is a link for the Freescale's DEMOJM board. It shows how to make a GUI for the board using SimpleUSB.dll & C#.  You can also download the dll from that web page and there is helpfull documentation for the dll.
    http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=USBJM_TRAINING&nodeId=016246fNrgVJ4Cx...
    I am trying to make the same thing with Labview instead of C#. But I am not familiar with the SW issues so am in trouble.
    Thanks,
    Emre

  • Trying to connect my MX459 using a Hotspot instead of WPS?

    I just bought a Canon Pixma MX459 and would like to print wirelessly from my smartphone and tablet. I currently have it hooked up to my laptop via a usb cable and is working fine. It appears to be telling me I have to have a router, but I don't have one. I use a hotspot to connect my laptop and tablet to the internet. Can I still hook this up wirelessly via my tablet or smartphone even though I don't have a router?

    Hi rbeckner,
    In order to use teh PXIMA MX459 wirelessly you do need a router.  Wireless hotspots only allow you to get devices on the internet.  They do not connect devices together to eachother which is what the MX459 needs to be able to communicate wirelessly.  I apologize for any inconvenience this may cause.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Need to write a report to show who is using SAP and to what extent

    Hi Experts,
    I need to write a report which should display who are using SAP and to what extent to forcast future SAP license needs...
    and to ensure the compliance by allocating license types correctly.
    My report should helpfull to organization to reduce the current license requirements and costs.
    Actually my problem is where can i get all these details in SAP, means from which tables.
    in which table can we get the sap user ids using mail id...
    Thanks in advance........
    Ram

    Hi gajeramesh ,
    Goto transaction 'SU10'
    Here you have all the data selection regarding a particular user id, so what you can do is do F1 on any of the fields and see the technical help in that for the table names.
    some of the tables are :
                                     1) 'USUSERS'(User: Transfer structure for lists of users),
                                     2) 'USER_ADDR' (Users by address data)
                                     3) 'USUSERALL' (Users with All Data for List Output)
    I hope this helps you  !!

  • Why can't I connect my iPhone 4 to my iPad 2 using personal hotspot in iPhone 4

    I have iPhone 4, iPhone 5 and iPad 2. Since I use cellular data, sometimes I put one of my sims into iPhone 5 and use personal hotspot to serve as a router. The iPad 2 works perfectly but if I turn on the feature in iPhone 4, neither the iPhone 5 nor the iPad 2 can connect to the iPhone 4. It detects the iPhone 4 but doesn't connect to it. Is there anything I'm missing or is iPhone 4 personal hotspot is not programmed to connect to my other two devices using this feature.

    Hi Von Sufi,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: System requirements for Personal Hotspot
    http://support.apple.com/kb/ht3574
    To connect to a Personal Hotspot, your device requires:
    Wi-Fi: Support for 802.11g/n using WPA2 encryption.
    USB: Mac or PC with iTunes 9.2 or later installed.
    Bluetooth: Mac OS X v10.4.11 or Windows.
    Carrier requirements
    Verify that your carrier supports Personal Hotspot for your device and that you have Personal Hotspot enabled on your cellular plan:
    iPhone: View a list of carriers that support Personal Hotspot on the iPhone.
    iPad and iPad mini: Check with your carrier for availability.
    Cheers,
    - Judy

  • My Bootstrap nav conundrum: Does anyone who has used a bootstrap nav in BC had this issue...

    My Bootstrap nav conundrum: Does anyone who has used a bootstrap nav in BC had this issue or know the fix: If you look at any page on http://www.aerotype.com, the first two clicks on almost any part of the page (like the rotator image left or right arrow) cause the page to jump, and you open the inspector on the top nav area and look at the div with the class="navbar-collapse collapse navbar-right navbar-ex1-collapse" you'll see that an additional class, .in, is added and .collapse is removed on the first click, and a style="height: auto;" is added, then on the second click it's changed to style="height: 0;"... I can't figure our what is causing 'in' to be added to the class (or .collapse removed), what it's for, or how to change it, if that is the issue... the his doesn't happen when the class: navbar-collapse is removed, so I think is has something to do with that but of course the collapse doesn't function without it. If anyone can enlighten me on what is going on I would Greatly appreciate it.

    You have this click function on the top'ish part of your site.js that is causing this issue!
    // collapse navbar in phone mode on click $(document).on('click',function(){ $('.navbar-collapse').collapse('hide'); }) // end collapse navbar in phone mode on click
    Your are better off just deleting it (the click function) as it is not doing what the code comment says it does.

  • HT204023 can i use a hotspot on my iphone to connect a kindle fire to my cellular internet?

    Can I use a hotspot on my iphone to connect to a kindle fire on my cellular internet?

    Yes

  • I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black.

    I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black. What should I do about it?

    without more information, I assume you mean a blackout from sleep issue.
    Go to system preferences > energy settings > raise the "turn display off" setting up to as needed, say 5 mins. or 10 mins.
    AND ...
    unchecked the "Put hard disks to sleep when possible" in both the battery and power adapter tabs.
    test it and check back

  • Can I check who has used AirPlay on my Apple TV?

    I need to know who has used AirPlay on my Apple TV

    only way is if your wifi router have some way of logging activities

  • Can you use Iphone hotspot to wirelessly connect to apple TV

    Can you use Iphone hotspot to wirelessly connect to apple TV.  ie I have no router but am interested in playing music from phone to apple TV.

    Yes in theory, though do check your phone contract small print and keep an eye on your data usage - in theory local data sent across the LAN created by the hotspot should not use 3G data but some carriers seem to treat it as internet data usage.
    AC

  • Why when I use personal hotspot at my iPad mini retina for my iPhone it doesn't stay for long,it disconnect after 5minute

    Please...
    Why when I use personal hotspot at my iPad mini retina for my iPhone it doesn't stay for long,it disconnect after 5minute

    Assuming you are using OSX, connect iphone ny usb then go to system preferences. Go to network pane and scroll down to "wheel" and from the drop down select service order. If you see the iphone then drag it to the top of the list then select apply.

  • Can't Pair iPhone to iPad using Personal Hotspot

    Hello. I have an iPhone3GS and an iPad (WiFi only). I recently updated my iPhone to use the new 4.3 software and see that it now has the "Personal Hotspot" option. I called AT&T and activated the functionality. However, it appears that I can only use the "Hotspot" via bluetooth or USB.
    That's OK but I am trying to connect it to my Ipad. I cannot seem to figure out how to pair the iPhone to the iPad. In the Bluetooth screen, neither of them will show the other. Any help or advice would be greatly appreciated.

    http://support.apple.com/kb/HT4517
    Bluetooth is not supported for file transfer
    You can pair to tether.
    You have to use USB

Maybe you are looking for