Who's winning the war for your data center, and Terminator memes!

G'Day Fellow SpiceHeads down under!!!
Here in the states Summer is in full swing and we are feeling the heat! But your flash architecture doesn't have to, join me and the Pure Storage team to find out who's winning the "Battle of the Flash Storage Architecture: Who is Winning the War for the Data Center"
In the meantime join the discussion and chime in with your best terminator meme, because who doesn't want to start their Thursday off with terminator meme's? Or tell me who you think is winning the war on the data center?
This topic first appeared in the Spiceworks Community

Android phones running ICS or JB have this capability built in; there also are apps in Google Play for Androids (such as Onavo Count).
My experience is that my phone and my installed Onavo Count track quite well with what's reported on my MyVerizon account's data usage.
Onavo Count is available for iPhones, and Windows Phones have Data Sense to track data usage.

Similar Messages

When you change the password for your apple Id and you loose all your messages can you get them back?

So my stupid mum decided to change the password instead of waiting for me to get up -_- and now I have lost all my iMessages that were very important and I can't find them I recently tried to back all my iPod up to my laptop but I had a look and couldn't find anything to do with messages can someone help

You only way is to restore from backup if you have backed up after the Messages were on the iPod but before you "deleted" them. iTunes only retains the last backup.
See the restore topic of:
iOS: How to back up

Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
I have...
...reset
...reinstalled 7.3.1.3 (over and over and over)
...tried different USB ports. (Early on, we saw it once after swapping ports).
...tried turning off the ability of the computer to 'Turn this device off to save power."
I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
But even after having tried everything, I still have an unrecognizable iPod.
When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
Regards. Adam

What are the settings for apn data and mms for iphone 4 on straight talk?

what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

SQL ENTERPRISE: The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database

The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?

Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Sync message, "You have changed the settings for your iphone. Would you like to apply these changes?" What does this mean? I don't recall changing anything...

Sync message, "You have changed the settings for your iphone. Would you like to apply these changes?" What does this mean? I don't recall changing anything...

The main settings that are changed in these cases can be found in this article:
http://support.apple.com/kb/ht1386
To ensure you don't lose any data you don't want taken off, ensure that each Summary, Apps, Music, Movies, TV Shows, Podcasts, iTunes U, Books, & Photos have the settings you would prefer on the computer.
If anything gets changed on any of those pages, you will be prompted with that message. If they look fine, especially after adding some media like songs or videos, then you can apply the changes without fear.

Who could give the license for the use of the songs?

Hey guys
Does anybody know the real names or authors of the songs "Dogma" and "Strategy" (both under "Intense" list) and also "peach Cobbler" (under "Cheerful")?
Basically, I need to know who could give the license for the use of these songs. Do you know any companies that license them or is Apple?
Thank you
Sinisa

Apple's license agreement says:
You may use the Apple and third party audio loop content (“Audio Content”),
contained in or otherwise included with the Apple Software, on a royalty-free basis, to create your own original
soundtracks for your video and audio projects. You may broadcast and/or distribute your own soundtracks that were
created using the Audio Content, however, individual samples, sound sets, or audio loops may not be commercially or
otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound
libraries, sound effects or music beds.
So you're fine as long as you add something to the loops or jingles - what's forbidden is to distribute one of them as a song. But that's probably not what you want to do.

2-3 things to watch out for when SAP is the source for a Data Warehouse

Hello
What are 2-3 things to watch out for when SAP is the source for a Data Warehouse (Informatica for ETL and Cognos for reporting)?
Thanks
G. Vijay

Going through some or all of this might help:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions (in Disk Utility).
Start up Safari again, and things should have improved.
If not, MacFixit have published a very detailed (very!) article on speeding up a slow Safari, here:
http://www.macfixit.com/article.php?story=20070416000657464
Many, including me, have also followed the advice given by others here to add DNS codes to their Network Settings, with good results in terms of speed-up:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
208.67.222.220
208.67.220.222
Click on Apply Now and close the window.
Restart Safari, and repair permissions.

Thanks for responding to my question. The annwer for your questions are: Measurment time : 300seconds, Sampling Frequency : 2 Hertz, and Window Type : Hanning. Hope you could hint me on this soon.

Thanks for responding to my question. The annwer for your questions are: Measurment time : 300seconds, Sampling Frequency : 2 Hertz, and Window Type : Hanning. Hope you could hint me on this soon.

ok, I see you posted parts of your VI in a different location. There is a sub-VI missing though ( Spline Interpolate.vi). But I re-constructed your data and can see the following things:
1 - Your signal has a significant DC-offset (approximatelly 1000) and this will result in a power value for DC of approximatelly 10E6 (though you wrote 10E8 in your first posting).
2 - If you ignore that DC, you can see on the time signal that there is another signal at very low frequency (order of magnitude amplitude = 10, power spectrum around bin 1 = 100) and you are not capturing an entire period of that signal, so either a measurement time of 300 seconds is not enough or this is a signal caused by a drift that you want to ignore.
But overall there is not much sign
al left once you remove your DC and eventually the very low frequency signal. But given your input signal, the power spectrum looks right. Remember also that the DC component will be replicated (with 6 dB reduction) on bin 1 when you apply a Hanning window. Try eventually without the Hanning window (but you'll still have to ignore your DC bin). Alternatively subtract the dc value from your time signal before computing your power spectrum.

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

How do i sync all my iphone 5g photos and contacts to my new windows computer. I have followed instructions but the following instructions don't seem to exist!!!In iTunes, in the source list, under Devices, click the entry for your iPhone or iPod touch.

How do i sync all my iphone 5g photos and contact to my new windows computer. I am following the itunes instructions but they don't seem to apply. In the source list click devices (so far so good) then click the entry for your iphone or ipod. that doesn't exist. HELP asap

hayley7070 wrote:
How do i sync all my iphone 5g photos and contact to my new windows computer. I am following the itunes instructions but they don't seem to apply
What instructions?
In the source list click devices (so far so good) then click the entry for your iphone or ipod. that doesn't exist. HELP asap
You don't import photos from the iPhone to your computer using iTunes.
See this -> iOS: Importing personal photos and videos from iOS devices to your computer
Note this only applies to photos taken with the iPhone. Any photos you previously added to your iPhone using iTunes should be copied from old computer to new computer.

Entered apasscode and forgot what it is. and now it says iphone disabled connect to itunes.. and when i connect it to itunes it tells me please enter the passcode for your iphone and connect it to itunes.. I dont know what to do now..

Entered apasscode and forgot what it is. and now it says iphone disabled connect to itunes.. and when i connect it to itunes it tells me please enter the passcode for your iphone and connect it to itunes.. I dont know what to do now..

iOS: Forgot passcode or device disabled - Apple Support

The table for storing data for infocube and ODS

Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!

Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit.

Some segments are missing in the idocs for master data zdebmas

hi guru's,
can any one hlep me here we facing the probelumm
some segments are missing in the idocs for master data zdebmas
, there is some issue on the generation of the Site Master IDoc (Message type: ZDEBMAS, Basic type: DEBMAS06).
This is using the SAP standard program (RBDMIDOC) which reads the Site master change pointers.
There is some segments below is missing in the IDoc:
how to chcek this probelumm...

hi
i got the function module. it is triggerig whne i do changepointer running.
what ever changes i made only that segments are onlycomming in to the idoc. but remaing segments are not comming.
my req is to show all segments even if i do changes in one segmet fields dont change theay have send to the interfece all athe segments.i ahve to do some enhancemetns for that
can u plse help me the login or any function module which will fill the alla the segmetns .

HT2128 Does any one know how to attach a document from your mail, while you are already in your e-mail, meaning not having to look for your file first and then open the e-mail.

Does any one know how to attach a document from your mail, while you are already in your e-mail, meaning not having to look for your file first and then open the e-mail.

Luis
Good question - and one that a lot of (business) people would like solved!
Your question prompted me to do some research, and I found this workaround posted by Scott Grossberg:
His solution actually addresses a second problem too - how to attach a document when replying to an email message. In your case you may not need to consider the "reply" aspect - but if not right now, it'll come in useful someday!
I've pasted it verbatim - if it works for you (it does for me) then all credit goes to Scott for solving the problem. There's just one thing I'd add to his solution: you will probably want to rename the message, as by default Goodreader gives it the Subject line: Mail with GoodReader attachments.
THE GOODREADER OPTION
1. CREATE the document you want to send.
2. SAVE it to GoodReader (this will require you to buy and install the app).
3. Go to your email and OPEN the email thread to which you want to Reply and attach your file.
4. COMPOSE your Reply.
5. DOUBLE TAP the message.
6. TAP SELECT ALL. This will copy the entire email thread.
7. OPEN GOODREADER on the iPad and go to the file you want to send as part of your Reply.
8. At the bottom of the GoodReader screen you will see an EXPORT icon (it looks like a rectangle with an arrow pointing to the right).
9. TAP the Export button.
10. TAP EMAIL FILE. Depending on your needs, tap either SEND FILE “AS IS” or “FLATTEN ANNOTATIONS.” This will open a compose message screen with the chosen document already attached.
11. TAP in the body of the email screen. TAP PASTE. This will place your composed Reply and the prior email thread into the message.
12. ENTER the Recipients’ names in the TO: field of your message.
13. SEND your email Reply.
The modified version (= when composing a new message rather than a reply):
1 Make sure that the doc you want to attach is saved in GoodReader
2 In the message you are composing, double tap, select all, and then copy.
3 Open GoodReader and select the file you want to attach
4 Select the export button at the bottom of screen
5 Select e-mail file
6 Position cursor in body of the email message, tap and paste. You may want to delete the "sent from GoodReader" text that precedes the attachment.
7 Rename your message (as by default it will be Mail with GoodReader attachments)
8 Add the recipient's address in the To field.
Hope this helps! All thanks to Scott for this workaround.

Who's winning the war for your data center, and Terminator memes!

Similar Messages

Maybe you are looking for