Who scheduled a job with service user

Hi,
In my one of the system one job is running with service user. As service user cannot log into system. One of the dialog user logged in to system and scheduled one job with service user. this job is running more than 2 months. Now we want to know who is that dialog user scheduled this job with service user. I have checked in job details it is not showing dialog user who has sheduelded first time.
Pls someone help me in this case.
Kind regards,
Ram
<subject_modified>
Use a proper subject
Read the "Rules of Engagement"
Edited by: Juan Reyes on Jul 1, 2009 10:25 AM

Just check the job owner.... If the Owner is the service user then most likely the user was changed to service user after the job creation. Also be aware that some jobs are generated by the system.
Regards
Juan

Similar Messages

Schedule background job with different user

hi ,
i want to schedule a background job under a different user
i have used the parameter AUTHCKNAM of 'job_submit'
it is giving sy-subrc = 0 .
but it is not working
i have also used the FM 'bp_job_create' in place of 'job_open'
it is giving sy-subrc = 0 .
but not working as needed
kindly help
regards...

hi
Try this
We can do that via SUBMIT statement:
Go through the documentation os SUBMIT statement with addition:
... USER user VIA JOB job NUMBER n
Schedules the specified report in the job specified by the job name job and the job number n. The job runs under the user name user and you can omit the addition USER user. The assignment of the job number occurs via the function module JOB_OPEN (see also the documentation for the function modules JOB_CLOSE and JOB_SUBMIT). This addition can only be used with the addition ...AND RETURN.
OR
go through this link , i hope this ll help you to solve your problem
http://help.sap.com/saphelp_nw2004s/helpdata/en/5f/ff2138faeb3807e10000009b38f889/content.htm
Hope this helps.
Thanks
Tushar

Schedule a job with email destination in BOXI R2 with email format as html

Hello Guys, would it to possible to schedule a job with email destination in BOXI R2 with email format as html? we are able to get it running with plain text email format. we use Java SDK to interface with BO Enterprise servers.
thanks for your thoughts,
Venkat

Hi
your job should SMOF_DOWNLOAD can bring new material master if you set up correctly.
as a smart method smof_download is the best way.
doble check your filter condition. it should work as you expected. because we dont involve in manual pulling...
check your variant once again. in vari table,
can you check r3ac1 - filter settings- source seetingsa--> source site nmae --> backendlogical system and filter sync..
br
Muthu

Schedule FTP Job with OEM 9i

Hi All,
Does anyone have experience of setting schedule ftp job with OEM and could give me some hints or an example, thank you very much. I am now using Oracle 9i.
Rds,
CH

Lucas,
Your first issue is regarding the control file not being passed. In order to fix that you have to specify the control file in the mapping configuration. Beware that this control file is being read through utl_file, i.e. you will have to set the utl_file_dir in the init parameters of your database to the correct directory in order for the database to be able to read it. Basically, the control file is being read in order to fill the audit tables with the correct data.
Your second issue is regarding the type of job. As you may know OWB 'integrates' with Oracle Workflow (OWF) as well. The OWF solution also relies on the use of OEM for job execution. All of that is currently managed by Workflow Queue Listener. In order for Workflow Queue listener to be able to correctly handle the OEM jobs (defined as external functions in OWF) the job has to be defined as is. Besides, with the current way of registering the jobs all jobs (PL/SQL, ABAP or SQL Loader) are registered in the same way and directed by parameters.
Hope this helps,
Mark.

Unable to Schedule the Report with a user with Author Role.

Hi,
I tried to Schedule the Report using weblogic user(which has admin role) it worked perfectly. But when i try to login using User(which has author role) and when i try to schedule a report i am getting the following error. It is clustered Environment.
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Location: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13039] The impersonator does not exist in the BI Security Service. (08004)
Error Codes:
Location: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID: /users/richard/Test Mail Report
...Trying Agent Get Response Content loop again.... Sleeping for 8 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Location: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13039] The impersonator does not exist in the BI Security Service. (08004)
Error Codes:
Location: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID:/users/richard/Test Mail Report
...Trying Agent Get Response Content loop again.... Sleeping for 6 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Location: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13039] The impersonator does not exist in the BI Security Service. (08004)
Error Codes:
Location: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID: /users/richard/Test Mail Report
Exceeded number of request retries for method GetResponseContent.
Can any one help me with this.
Thanks
Rondo.
Edited by: RONDO on Dec 12, 2012 4:07 PM

Check the Doc ID 1446877.1
As per this doc Fix to apply patch 13553428:
The fix to this issue is to apply patch for the following unpublished bug.
Bug 13553428 - QA:BLK:DELIVER TO CORP. OID LDAP USERS FAILED WITH IMPERSONATOR DOES'NT EXIST.
Patch 13553428: QA:BLK:DELIVER TO CORP. OID LDAP USERS FAILED WITH IMPERSONATOR DOES'NT EXIST.
The patch is available on MOS and can be applied to all platforms.
Or access via this link:
https://updates.oracle.com/Orion/Services/download/p13553428_111160_Generic.zip?aru=14732325&patch_file=p13553428_111160_Generic.zip
Please refer to the Readme. It is important to Stop the System before applying the patch. Then restart.
During restart Weblogic should automatically detect that bimiddleware.ear has changed in the OH and automatically redeploy the application
If helps pls mark as correct
Edited by: Srini VEERAVALLI on Dec 12, 2012 7:39 PM

BOE XI R2 - Configuring RAS with Service user, RAS Fails to start...

Colleagues:
Where would kbase article c2018785 be found?
I am configuring my BOE XI R2 to use End-to-End SSO via IIS using this document from Business Objects:
Link: [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403cdf46-c63e-2b10-2997-978cb8ba59f0]
In this document, you create a service user under which certain applications run, including the Report Application Server.
There is a specific note on page 6 in the doc which states:
The RAS server may fail to start under this new service account. If you experience this issue, follow the steps outlined in the following kbase:
Link: [http://support.businessobjects.com/library/kbase/articles/c2018785.asp]
Unfortunately, the link is out of date, and I have not found the article using the existing search tools.
I did use the -trace argument to the command line to start up the RAS service, and the output is follows:
Timestamp     ProcessID     ThreadID     Message
[Thu May 07 13:21:39 2009]     4448     4228     (.ashwin32service.cpp:165): trace message: RAS starting
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2039): CDTSApp::InitInstance(): In CDTSParameters::RUN
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2055): CDTSApp::InitInstance(): Starting server. Process Id=4448
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2062): CDTSApp::InitInstance(): setServerParameters() done
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2130): CDTSApp::InitInstance(): initLicenseLimit() returns 1
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3895): CDTSApp::loadServerOptions(): about to SaveToRegistryAsDefault
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3897): CDTSApp::loadServerOptions(): done SaveToRegistryAsDefault hr=-2147024891
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3916): CDTSApp::loadServerOptions(): error Access is denied.
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2134): CDTSApp::InitInstance(): loadServerOptions() returns 0
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2194): CDTSApp::InitInstance(): getDataEngineName() returns C:TrouxBusiness Objectscommon3.5 incrpe32.dll
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2197): CDTSApp::InitInstance(): openEngine() returns 0
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2292): CDTSApp::InitInstance(): preloadMSXML() done
[Thu May 07 13:21:39 2009]     4448     4228     trace message: EnCOMSessionMgr::EnCOMSessionMgr begins...
[Thu May 07 13:21:39 2009]     4448     4228     trace message: EnCOMSessionMgr::EnCOMSessionMgr trying to get Singleton SessionManager.
[Thu May 07 13:21:39 2009]     4448     4228     trace message: CInfoSessionManager::Initialize start
[Thu May 07 13:21:39 2009]     4448     4228     trace message: CInfoSessionManager::Initialize, start the cluster refresh thread
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:2445): CDTSApp::InitInstance(): caught UNKNOWN EXCEPTION!!!
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:2461): CDTSApp::InitInstance() returns 0
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:1039): CAgentMapMT::ShutDown - outstanding agents:
[Thu May 07 13:21:40 2009]     4448     4228     (.ashwin32service.cpp:329): trace message: RAS Exiting: return code = 0
In the Windows event viewer, this error is echoed:
Failed to load Report Application Server settings from the system registry.
Detailed Message: Access is denied.
It seems my service account needs a certain permission to be able to load and read the registry for this application, and I'm sure this permission is discussed in the missing kbase article.
Could you please let me know what permission is required for this user on the OS? This is Win2003 x64 SP2.
Thanks, and have a good day

Hi,
if this a permissions problem then just start +regedit*, go to
My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects
select it, press the right mouse button and choose Permissions. Press the advanced button and assign your service account with full control at this point of the registry. Do not forget to select the +Replace Permissions Entries on all child objects ... + option.
You can also take a look at Notes 1199630 and 1201489 (this one is for CR 10 but it may be worth it to follow the instructions there) ( [https://service.sap.com/notes])
Regards,
Stratos

Reports-Job-Scheduler: create job with startoption later: wrong date-format

Hi,
I test reports 11.1.1.2.0 (weblogic11 g) and try to start a report job with Reports-Job-Scheduler.
Startoption: later and date = 09:48 Jan 12, 2010
When I submit the job I get following Error:
REP-50006: Das Argument SCHEDULE ist in der Befehlszeile ungültig: 09:48 Jän 12, 2010
in english:
Rep-50006: argument Schedule is wrong in command line: 09:48 Jän 12, 2010
Why is Jän instead of Jan.
When I start the report in February then it works.
I defined also environment variables in basic configuration for the report server:
NLS_DATE_FORMAT DD.MM.YYYY
NLS_DATE_LANGUAGE GERMAN
NLS_LANG GERMAN_GERMANY.WE8ISO8859P1
I would be very pleased to get support.
Many thanks
Alois

I created a SR and oracle support found a bug in EM.

Schedule a Job with multiple steps via ABAP Program

Hi Friends,
I want to create a report(Ex: ZREP) that will run another program(Ex: ZPGM) in background. What I need to do is, when I execute the report ZREP it should run the ZPGM automatically in background. This background execution should happen through JOB with multiple steps.
Why i am mentioned steps is, i have 1000 records in ZTABLE and need to execute 100 records each in one step and need to proecess in ZPGM with selection parameters. So in my case my job should create with 10 steps and need to execute in sequential manner.
FYI, In the ZREP selection screen i need to enter the records count/ interval to derive the job steps.
Please guide how to go ahead? Thanks in advance for all the help.
Regards,
Raghu.

Hi Raghu,
You can try the following pieces of code:
Loop at gt_table.   "This table contains 100 records previously appended
w_jobname = c_job_emision   "Job Name.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = w_jobname
      IMPORTING
        jobcount         = w_jobacount
      EXCEPTIONS
        cant_create_job = 1
        invalid_job_data = 2
        jobname_missing = 3
        OTHERS           = 4.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
* Perform or create T_SELTAB with parameters options
PERFORM Create_seltab_table.
*Call second program.
SUBMIT ZREP WITH SELECTION-TABLE t_seltab AND RETURN.
*Close Job.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
        jobcount             = w_jobacount
        jobname              = w_jobname
        strtimmed            = c_x "Immediate Start
     EXCEPTIONS
        cant_start_immediate = 1
        invalid_startdate    = 2
        jobname_missing      = 3
        job_close_failed     = 4
        job_nosteps          = 5
        job_notex            = 6
        lock_failed          = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDLOOP.
Hope this helps.
Regards
Ernesto
PS: Raymond Giuseppi was faster.
Edited by: Ernesto Caballero on Mar 10, 2010 1:57 PM

Scheduling a job with multiple output formats.

Urgent!!
Basically while scheduling a job in BI Publisher we specify an output format. It can be PDF, CSV, HTML or so… Is there a way to specify more than one output format while scheduling a job.
Thanks in advance.
Ashok

you have to re-publish them.
for a run, you can have only one output .

Problem in Scheduling a job with IF condition

Hi All,
We have list of jobs running everyday through shceduler. All jobs are running successfully.
But one job is behaving strange.
The Job has been running before the trigger file is received. This has caused a lot of pain since Everyday the users are pointing it and I’m loading it again.
When I add the condition for the job, the job does not run.
We need to be able to add the if condition exists to avoid this situation.
Please let me know if you have any idea on this issue.
I am using Arcana Scheduler, Windows 2003 server, Version of Hyperion 7.1.2.
Thanks,
Prathap

Hi Siva
Just tested in my syste with <b>AFTER JOB</b>, and it works fine for me.
Please check that naming conventions are same when you define the first job and use in second. Also please make sure that you have removed the values from other tabs.
General mistake that we do is, when we define two jobs immediately i.e one after other we overlook values from the previous one. Please check the same as well.
Kind Regards
Eswar

Unable to schedule webi report with Test user

Hi All,
I get the below error when i try to schedule a WEBI report with user id.
I can schedule with my developer id.
Error Message: Sorry, you do not have the right to 'Edit objects' (ID: 6) for 'sudes_errors' (ID: 45941). Please contact your administrator if you require this right.
Any inputs greatly appreciated.
Thanks

Error clearly showing that, Test user need access rights defined @ CMC.
Contact BO admin, to assign Schedule/Full control rights for that Test user.
Thank You!!
H2H

Invalid_jobdata when submitting job with rfc user

Hi,
I've created a function module in the erp system to remotly trigger a report program by a bw prossess chain.
When running in the forground it works fine, but the runtime is so long that I want it as a background job.
So I call job_open, job_submit, job_close in the function module. When I test the function module in the erp system with my dev user it opens a new job, adds a step and release correctly. It also runs fine if I intercept it in the debugger and change sy-uname to aleremote (the standard rfc user).
It does not work when it's acctually called rfc from the bw system. The job is opened, but job_submit throws invalid_jobdata.
Could this have anything to do with rfc or the executing user (which is of type SYSTEM)?

I've caught the execption so there is no dump, but I'm unable to determine why the function module job_submit gives invalid_jobdata only when the executing user is the aleremote user and only when the call originated (the call to my module) from a remote system (the module job_submit is called locally thru my module). Authorization for the user is sap_all, but I was woundering maybe the user type system could be a problem?

Scheduling a job with different variants

i have a program to be run daily for three company codes and different materials. If i give all the three company codes at a time then the program is taking a lot of time and giving a run time error 'time limit exceeded' .Can i create variants for that program and make it run sequentially with all the variants.

hi Deepthi,
Yes you can do that .. i even suggest to modify your select statements to reduce the processing time .
Refer
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Regards,
Santosh
Message was edited by:
Santosh Kumar Patha

Scheduling background job with varient

Hi All,
How do we default the dynamic field in the selection screen when we execute the program in background with variant?
Thanks in advance
Jaison.

give parameters at selection screen and then click on save ,give variant name n description n then click on push button - Selection varaiables,there u can assign dynamic values like current date n all
amit

Schedules Error - Job execution failed because the user who scheduled this

Hi
I wonder if anyone can help
I have a report that I can deliver by email through the BI Publsiher front end without issue. However when I call the report to send by email through my oracle 11G Database, as the same BI User I get the following error message
"oracle.apps.xdo.servlet.scheduler.ProcessingException: Job execution failed because the user who scheduled this job has no more permission or priviledge to run the job."
Any suggestions?
Thanks
Kev

The scheduler appears to be the culprit here so try the following:
1. Open the [repository_home]/Admin/Scheduler/quartz-config.properties file
2. Add the following entry:
org.quartz.threadPool.threadsInheritContextClassLoaderOfInitializingThread=true
3. Restart the environment (xmlpserver)
4. Rerun the report via the scheduler

Who scheduled a job with service user

Similar Messages

Maybe you are looking for