Who start/stop Performance Monitor

Hi all,
Is there's any audit trace I can check on who did the start/stop on Performance Monitor tool?
Because I've created the Performance Monitor tool to run for a week, then on day 3 I found it was stopped.
I ran it again & it's now completed.
So, how can I tell who did the job to stop the tool on day 3 that day? I just can't seem to find on on Event Viewer.
Thank you in advanced!
---Pat

Hi Patrick M,
Based on your description, I want to confirm whether this
Performance Monitor was stopped automatically. Please check if it occurred (stop working) with a cycle. In other words, please check if Performance Monitor stops automatically every 3 days. Just guess.
There is a similar question, it may provide some thoughts.
http://social.technet.microsoft.com/Forums/en-US/69d209eb-6717-499f-9b8e-0de09eb11695/performance-monitor-every-weekend-is-stopped-automatically?forum=winservergen
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Edit Cluster Start-stop- and Monitor-Scripts via Bash?

Hi,
is there a way to edit (and sync!) the Cluster-Scripts via CLI?
Regards
Bernd

The short answer is no. The scripts are stored in eDir, and NCS keeps revisions of them internally. The best place to edit them is iManager. Alternatively, you can directly change the eDir attributes for those scripts while cluster is down.
That said, everything that iManager does comes in through a file interface. If you goal is to script resource modification, you can always access the file interface directly.
Regards,
Changju
Originally Posted by toblerone
Hi,
is there a way to edit (and sync!) the Cluster-Scripts via CLI?
Regards
Bernd

Performance monitor - System performance does not start work?

When I right click it to start it does nothing, and I can't stop it either by right clicking it.

Hi,
Please use the following method to start the performance monitor.
1. Click Start, click in the Start Search box, type perfmon, and press ENTER.
2. In the navigation tree, expand Monitoring Tools, and then click Performance Monitor.
If any error message received, please let me know.
Niki Han
TechNet Community Support

Performance monitor stops running

In Windows Server 2012, in Performance Monitor, I have a user-defined Data Collector Set. It is configured to sample every 2 minutes. But it stops running after taking only 3 samples. Could I please get some advice on how to find what is stopping this so
that it will run indefinitely?
Here is some more detail from the properties:
Schedule - Nothing set. I start the set running from Task Scheduler.
Stop Condition - Nothing enabled.
Log format: CSV
I don't see anything in the Application or System event logs that say anything about the performance monitor. Maybe there is another event log that I don't know about.
I have similar reports running on WS2008 machines and they don't stop running.
Cam

Hi Cam,
If you mean to run this data collector indefinitely, please try to set 1439 ((23*60) + 59 )minutes for the Overall duration in stop condition, which is 23 hours and 59 minutes total run time. Because Reports are compiled once the collector
set stops. This means we can’t let this collector just simply run forever because I will never get a report.
Please also check the option "If the task is already running, then the following rule applies: Stop the existing instance" in the related scheduled task under Task Scheduler Library > Microsoft > Windows > PLA.
I also recommend you can go through this article, which lists many good tips to configure Data Collector Sets:
http://blogs.technet.com/b/askpfeplat/archive/2012/02/27/taming-perfmon-data-collector-sets.aspx
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

API to Start / Stop Applications or to perform NWA like operations

Hello,
is there an API available that enables me to start and stop deployed ears programmatically?
Or more generally asked, is there a way to perform the same actions that are possible with the NWA, e.g. modify web service ports, deploy applications and so on.
Thanks in advance.
ciao,
Elmar

Yes there is. I am trying to use it right now.
It is the DeplyService interface (com.sap.engine.services.deploy.DeployService) which is contained in the deploy.sda.
You can use it to start/stop applications, remove applications, deploy applications, etc.

Performance monitor counter alert stops working during run

I've created a counter alert whenever the processing time of a specific process falls below a certain threshold, so that a email would be sent to me through task scheduler. I had tested the set up by turning off the process and checking to see whether performance
monitor would trigger an alert (it did). Then I let the counter run continuously. After several days, I noticed that the process had froze, but the counter did not trigger an alert even though performance was clearly below the threshold I had set. It doesn't
look like the counter had stopped running either during this time. Why wasn't an alert triggered? Is it not possible to run a counter continuously?

Hi,
Thanks for your question.
Firstly, would you please tell us which performance counter you have chosen? Is it Process\%Processor time?
In addition, which kind of alert have you configured, to log in the event log or send emails?
Process\% Processor
Time is the percentage of elapsed time that all of process threads used the processor to execution instructions. You can try to turn off the process which is frozen now to see if you will receive the alert.
Besides, what is the meaning of “run
a counter continuously”? Did you set any stop conditions?
Best regards,
Susie

GGMonitor-Stopping &starting related goldengate monitor processes.

Hi All,
I have installed the Goldengate Monitor on a server.
For maintenance purposes I am planning to bring down the database.
As part of this What is the procedure for bringing down the Goldengate monitor processes and bring it up back again ?
Thanks,

Monitor can be stopped and restarted with the <Monitor Install Directory>/bin/monitor.sh stop and <Monitor Install Directory>/bin/monitor.sh start commands
It may or may not be necessary to stop the JAGENTs of each of your OGG installs prior to stopping Monitor. I'm not sure actually. The JAGENT might reconnect just fine though when Monitor is back up. Something to test.

How to perform some action every time when AppServer starts/stops

I need to start/stop some external processes every time when AppServer starts/stops. Is there standart mechanism or API to do this?

Most of the app servers support a concept of startup and shut down classes (I use this feature in Web logic 6.1)
The startup classes are executed every time you start the app server and the shutdown classes are executed everytime the app server is brought down.
Here is a URL that will give u all the details you need to know for weblogic startup classes
http://e-docs.bea.com/wls/docs61///////ConsoleHelp/startupclass.html
This is the URL for shut down classes for web logic
http://e-docs.bea.com/wls/docs61//////ConsoleHelp/shutdownclass.html
hope this helps.
regards,
Abhishek.

How do I write/use performance monitor to run an action when something happens?

I notice that I get a popup if desktop resources are over-used asking me if I want to turn off the glass desktop.
That's fine.
I've been looking in Performance Monitor for how this is done, as I have a program that periodically runs amok and starts indexing my Documents directory. I usually start to notice my machine getting sluggish when the process gets to about 1.5-2+GB
in Virtual and working memory. At that point it seems to be increasing it's network usage rate geometically, and interrups will start getting delayed or lost -- keyboard will lock up for periods, lots of things freezing temporarily (music will get 10-20
second dropouts) It can even cause a complete system lockup
So what I would like to do is monitor any instance of this process by name ('explorer'), and restart it when it gets to over 1.5GB of usage.
I setup a monitor of virtual size and working memory in the performance monitor, but I don't see how to set up an alarm that starts an action to restart it. (restarting it will cause the problem to go away for anywhere from a few hours to several days).
I've no clue as to what triggers it.
I found a bunch of XML scripts in
Windows/pla/Rules with names like:
Rules.System.CPU.xml*
Rules.System.Common.xml*
Rules.System.Configuration.xml*
Rules.System.Diagnostics.xml*
Rules.System.Disk.xml*
Rules.System.Finale.xml*
Rules.System.Memory.xml*
Rules.System.NetDiagFramework.xml*
Rules.System.NetTrace.xml*
Rules.System.Network.xml*
Rules.System.Performance.xml*
Rules.System.Performance.xml.orig*
Rules.System.Summary.xml*
Rules.System.Wired.xml*
Rules.System.Wireless.xml*
These have some XML language in them that looks like it woud be for monitorying and doing actions:
<Rule name="$(RuleDiskSummary)" enabled="true">
   <Step select="/Report/Section/Table[@name='hotFile']">
    <Exists>
     <Otherwise>
      <Delete select="Summary"/>
     </Otherwise>
    </Exists>
   </Step>
   <Step select="/Report/Section/Table[@name='physicalDiskCounters']" fatal="true">
    <Exists>
     <Otherwise>
      <Insert>
       <Node>
        <Summary key="100" find="field" field="counter" value="Avg. Disk Queue Length" topic="diskInfo">
         <Data name="max" label="diskQueue"/>
        </Summary>
       </Node>
      </Insert>
     </Otherwise>
    </Exists>
   </Step>
</Rule>
</Group>
<StringTable>
<String ID="GroupSummary">Add Summary Blocks</String>
<String ID="RuleMemorySummary">Memory Summary</String>
<String ID="RuleDiskSummary">Disk Summary</String>
<String ID="RuleNetworkSummary">Network Summary</String>
</StringTable>
<Rule name="$(RuleDiskSummary)" enabled="true">
   <Step select="/Report/Section/Table[@name='hotFile']">
    <Exists>
     <Otherwise>
      <Delete select="Summary"/>
     </Otherwise>
    </Exists>
   </Step>
   <Step select="/Report/Section/Table[@name='physicalDiskCounters']" fatal="true">
    <Exists>
     <Otherwise>
      <Insert>
       <Node>
        <Summary key="100" find="field" field="counter" value="Avg. Disk Queue Length" topic="diskInfo">
         <Data name="max" label="diskQueue"/>
        </Summary>
       </Node>
      </Insert>
     </Otherwise>
    </Exists>
   </Step>
</Rule>
</Group>
<StringTable>
<String ID="GroupSummary">Add Summary Blocks</String>
<String ID="RuleMemorySummary">Memory Summary</String>
<String ID="RuleDiskSummary">Disk Summary</String>
<String ID="RuleNetworkSummary">Network Summary</String>
</StringTable>
Question is, how can I setup it for calling a trigger script when
parameters for Explorer get out of spec.
On confusing issue that stopped me from proceeding, was the time schedule to run the report:
I only allows for once/day.
I need / want continuous monitorying -- say at 1 minute or 3 minute intervals (5 might work, not sure -- doesn't take long for Explorer to get to 1-2G with a network connection of 10Gb.
So how can I monitor and control it?
A side issue -- I notice a resource-control agent for Win 2008 -- but this was disabled for Win7.
Anyone know why resource usage on Win7 was considered less important than on Win2k8 server?
My version of Win7 is Win7-x64-sp1 "Ultimate" [sic] (it doesn't include professional features like resource control)...
Thanks...This has bothered me for over a year and has persisted through new profiles and reinstalls of of the OS.
I have a feeling it is related to MS disabling Network disks in their indexer, so Explorer ends up doing it as a surrogage for things like the search engine (with the results not stored, because they are not local -- the worst of both worlds?)... but that's
just a feeling...
Thanks!
Astara...

You can create a Data Collector Set (create manually, not template), then choose performance counter Alert, configure alert actions, from the script, seems you want to monitor the “physicalDisk” performance, so you can set the “physicalDiskCounters”
into alert action, please follow the instruction in the link below.
Monitor disk space
http://www.ms-opsmgr.eu/?cat=43
If you want to view the detailed process related about explorer when your machine getting sluggish, I'd like to introduce a tool named process explorer to you.
http://technet.microsoft.com/en-in/sysinternals/bb896653.aspx
It can clearly show you the processes running in your system, along with the hierarchical relationship and the cpu usage.
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Performance Monitor MMC crashes

Ever since we patched our servers up to MS14-016, when we open Performance Monitor and click on Data Collector Sets > System the MMC hangs and eventually crashes. All other functions of the Performance Monitor work just fine (ie. Monitoring Tools
> Performance Monitor, Data Collector Sets > User Defined, Data Collector Sets > Event Trace Settings, etc etc...). Any insight into this would be greatly appreciated. Looking at the event logs, all that is logged after the crash is:
The program mmc.exe version 6.1.7600.16385 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1d04
Start Time: 01cf4db4ec3f1a03
Termination Time: 0
Application Path: C:\Windows\system32\mmc.exe
Report Id: c073b802-b9a8-11e3-be5e-005056a81e07
AND
Fault bucket , type 0
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: mmc.exe
P2: 6.1.7600.16385
P3: 4a5bc808
P4: 23c8
P5: 0
P6:
P7:
P8:
P9:
P10:
Attached files:
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppHang_mmc.exe_37c3eeafdc8c0db17ea5c8bf54865eaae859f_214d501d
Analysis symbol:
Rechecking for solution: 0
Report Id: 3b0c4e14-b9a5-11e3-be5e-005056a81e07
Report Status: 0
I've looked at the file it references: "C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppHang_mmc.exe_37c3eeafdc8c0db17ea5c8bf54865eaae859f_214d501d" and here are its contents:
Version=1
EventType=AppHangB1
EventTime=130408341073743418
ReportType=3
Consent=1
ReportIdentifier=3b0c4e13-b9a5-11e3-be5e-005056a81e07
IntegratorReportIdentifier=3b0c4e14-b9a5-11e3-be5e-005056a81e07
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=mmc.exe
Sig[1].Name=Application Version
Sig[1].Value=6.1.7600.16385
Sig[2].Name=Application Timestamp
Sig[2].Value=4a5bc808
Sig[3].Name=Hang Signature
Sig[3].Value=23c8
Sig[4].Name=Hang Type
Sig[4].Value=0
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.274.10
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Hang Signature 1
DynamicSig[22].Value=23c8db59484cc2d09f1dd279b1b0c7be
DynamicSig[23].Name=Additional Hang Signature 2
DynamicSig[23].Value=42cb
DynamicSig[24].Name=Additional Hang Signature 3
DynamicSig[24].Value=42cb8db6cfb7dc1f7ddd991fa9dbbbbe
DynamicSig[25].Name=Additional Hang Signature 4
DynamicSig[25].Value=23c8
DynamicSig[26].Name=Additional Hang Signature 5
DynamicSig[26].Value=23c8db59484cc2d09f1dd279b1b0c7be
DynamicSig[27].Name=Additional Hang Signature 6
DynamicSig[27].Value=42cb
DynamicSig[28].Name=Additional Hang Signature 7
DynamicSig[28].Value=42cb8db6cfb7dc1f7ddd991fa9dbbbbe
UI[3]=Microsoft Management Console is not responding
UI[4]=Windows can check online for a solution. If you close the program, you might lose information.
UI[5]=Check for a solution and close the program
UI[6]=Check for a solution and close the program
UI[7]=Close the program
LoadedModule[0]=C:\Windows\system32\mmc.exe
LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
LoadedModule[2]=C:\Windows\system32\kernel32.dll
LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
LoadedModule[4]=C:\Windows\system32\GDI32.dll
LoadedModule[5]=C:\Windows\system32\USER32.dll
LoadedModule[6]=C:\Windows\system32\LPK.dll
LoadedModule[7]=C:\Windows\system32\USP10.dll
LoadedModule[8]=C:\Windows\system32\msvcrt.dll
LoadedModule[9]=C:\Windows\system32\MFC42u.dll
LoadedModule[10]=C:\Windows\system32\ole32.dll
LoadedModule[11]=C:\Windows\system32\RPCRT4.dll
LoadedModule[12]=C:\Windows\system32\OLEAUT32.dll
LoadedModule[13]=C:\Windows\system32\ODBC32.dll
LoadedModule[14]=C:\Windows\system32\ADVAPI32.dll
LoadedModule[15]=C:\Windows\SYSTEM32\sechost.dll
LoadedModule[16]=C:\Windows\system32\mmcbase.DLL
LoadedModule[17]=C:\Windows\system32\SHLWAPI.dll
LoadedModule[18]=C:\Windows\system32\UxTheme.dll
LoadedModule[19]=C:\Windows\system32\DUser.dll
LoadedModule[20]=C:\Windows\system32\IMM32.DLL
LoadedModule[21]=C:\Windows\system32\MSCTF.dll
LoadedModule[22]=C:\Windows\system32\odbcint.dll
LoadedModule[23]=C:\Windows\system32\DUI70.dll
LoadedModule[24]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac\Comctl32.dll
LoadedModule[25]=C:\Windows\system32\SHELL32.dll
LoadedModule[26]=C:\Windows\system32\CRYPTBASE.dll
LoadedModule[27]=C:\Windows\system32\urlmon.dll
LoadedModule[28]=C:\Windows\system32\iertutil.dll
LoadedModule[29]=C:\Windows\system32\WININET.dll
LoadedModule[30]=C:\Windows\system32\Normaliz.dll
LoadedModule[31]=C:\Windows\system32\CLBCatQ.DLL
LoadedModule[32]=C:\Windows\system32\mmcndmgr.dll
LoadedModule[33]=C:\Windows\System32\msxml3.dll
LoadedModule[34]=C:\Windows\system32\profapi.dll
LoadedModule[35]=C:\Windows\system32\apphelp.dll
LoadedModule[36]=C:\Windows\System32\wdc.dll
LoadedModule[37]=C:\Windows\System32\pdh.dll
LoadedModule[38]=C:\Windows\System32\pdhui.dll
LoadedModule[39]=C:\Windows\system32\COMDLG32.dll
LoadedModule[40]=C:\Windows\System32\Secur32.dll
LoadedModule[41]=C:\Windows\system32\SSPICLI.DLL
LoadedModule[42]=C:\Windows\System32\credui.dll
LoadedModule[43]=C:\Windows\System32\wevtapi.dll
LoadedModule[44]=C:\Windows\System32\VERSION.dll
LoadedModule[45]=C:\Windows\System32\PLA.dll
LoadedModule[46]=C:\Windows\System32\tdh.dll
LoadedModule[47]=C:\Windows\system32\NSI.dll
LoadedModule[48]=C:\Windows\System32\IPHLPAPI.DLL
LoadedModule[49]=C:\Windows\System32\WINNSI.DLL
LoadedModule[50]=C:\Windows\System32\WINSTA.dll
LoadedModule[51]=C:\Windows\System32\UTILDLL.dll
LoadedModule[52]=C:\Windows\system32\SETUPAPI.dll
LoadedModule[53]=C:\Windows\system32\CFGMGR32.dll
LoadedModule[54]=C:\Windows\system32\DEVOBJ.dll
LoadedModule[55]=C:\Windows\System32\NETAPI32.dll
LoadedModule[56]=C:\Windows\System32\netutils.dll
LoadedModule[57]=C:\Windows\System32\srvcli.dll
LoadedModule[58]=C:\Windows\System32\wkscli.dll
LoadedModule[59]=C:\Windows\system32\SAMCLI.DLL
LoadedModule[60]=C:\Windows\system32\LOGONCLI.DLL
LoadedModule[61]=C:\Windows\system32\BROWCLI.DLL
LoadedModule[62]=C:\Windows\System32\WTSAPI32.dll
LoadedModule[63]=C:\Windows\system32\oleacc.dll
LoadedModule[64]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[65]=C:\Windows\system32\rsaenh.dll
LoadedModule[66]=C:\Windows\system32\RpcRtRemote.dll
LoadedModule[67]=C:\Windows\system32\propsys.dll
LoadedModule[68]=C:\Windows\system32\mlang.dll
LoadedModule[69]=C:\Windows\system32\dwmapi.dll
LoadedModule[70]=C:\Windows\system32\xmllite.dll
LoadedModule[71]=C:\Windows\System32\ieframe.dll
LoadedModule[72]=C:\Windows\system32\PSAPI.DLL
LoadedModule[73]=C:\Windows\system32\SXS.DLL
LoadedModule[74]=C:\Windows\system32\WS2_32.dll
LoadedModule[75]=C:\Windows\system32\dnsapi.DLL
LoadedModule[76]=C:\Windows\System32\mshtml.dll
LoadedModule[77]=C:\Windows\system32\RASAPI32.dll
LoadedModule[78]=C:\Windows\system32\rasman.dll
LoadedModule[79]=C:\Windows\system32\rtutils.dll
LoadedModule[80]=C:\Windows\system32\sensapi.dll
LoadedModule[81]=C:\Windows\system32\msimtf.dll
LoadedModule[82]=C:\Windows\system32\vbscript.dll
LoadedModule[83]=C:\Windows\system32\WINMM.dll
LoadedModule[84]=C:\Windows\system32\d2d1.dll
LoadedModule[85]=C:\Windows\system32\DWrite.dll
LoadedModule[86]=C:\Windows\system32\dxgi.dll
LoadedModule[87]=C:\Windows\system32\WINTRUST.dll
LoadedModule[88]=C:\Windows\system32\CRYPT32.dll
LoadedModule[89]=C:\Windows\system32\MSASN1.dll
LoadedModule[90]=C:\Windows\system32\d3d10_1.dll
LoadedModule[91]=C:\Windows\system32\d3d10_1core.dll
LoadedModule[92]=C:\Windows\system32\d3d11.dll
LoadedModule[93]=C:\Windows\system32\D3D10Warp.dll
LoadedModule[94]=C:\Windows\System32\sysmon.ocx
LoadedModule[95]=C:\Windows\System32\ATL.DLL
LoadedModule[96]=C:\Windows\system32\ntmarta.dll
LoadedModule[97]=C:\Windows\system32\WLDAP32.dll
LoadedModule[98]=C:\Windows\system32\mscoree.dll
LoadedModule[99]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscoreei.dll
LoadedModule[100]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\CorperfmonExt.dll
LoadedModule[101]=C:\Windows\system32\MSVCR110_CLR0400.dll
LoadedModule[102]=C:\Program Files (x86)\Trend Micro\OfficeScan Client\perfiCrcPerfMonMgr.dll
LoadedModule[103]=C:\Windows\system32\loadperf.dll
LoadedModule[104]=C:\Windows\system32\USERENV.dll
LoadedModule[105]=C:\Windows\system32\rasctrs.dll
LoadedModule[106]=C:\Windows\system32\tapiperf.dll
LoadedModule[107]=C:\Windows\system32\usbperf.dll
LoadedModule[108]=C:\Windows\system32\pcwum.dll
LoadedModule[109]=C:\Windows\System32\perfos.dll
LoadedModule[110]=C:\Windows\System32\perfdisk.dll
LoadedModule[111]=C:\Windows\System32\Perfctrs.dll
LoadedModule[112]=C:\Windows\system32\msls31.dll
LoadedModule[113]=C:\Windows\System32\Dxtrans.dll
LoadedModule[114]=C:\Windows\system32\ddrawex.dll
LoadedModule[115]=C:\Windows\system32\DDRAW.dll
LoadedModule[116]=C:\Windows\system32\DCIMAN32.dll
LoadedModule[117]=C:\Windows\System32\Dxtmsft.dll
LoadedModule[118]=C:\Windows\system32\windowscodecs.dll
LoadedModule[119]=C:\Windows\System32\perfproc.dll
LoadedModule[120]=C:\Windows\System32\perfnet.dll
LoadedModule[121]=C:\Windows\system32\wbem\wmiaprpl.dll
LoadedModule[122]=C:\Windows\system32\wbemcomn.dll
FriendlyEventName=Stopped responding and was closed
ConsentKey=AppHangXProcB1
AppName=Microsoft Management Console
AppPath=C:\Windows\System32\mmc.exe
ReportDescription=A problem caused this program to stop interacting with Windows.

Hi CyberMat,
The next time you open your LabVIEW after a crash, there should be an error log file create. Please let me know the name of this file.
Thanks!
Karunya
Warm regards,
Karunya R
National Instruments
Applications Engineer

Start/Stop Channels Externally

Hi,
I have been looking at the blog /people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping to see how this is done. I can see from the blog that a PI interface has been developed.
I have ran the URL in a browser and get a 'Website cannot be displayed' error. I do not know what the cause of this is, whether the browser cannot parse the response, or the webservice is not called correctly. Could this problem be occuring if I do not have the relevant auth.
Is it possible to execute the URL directly from ABAP. Has anyone been able to do it. I presume this webservice does not have to be calledd via PI.
Is there a blog or anything other document which describes how this interface (with dynamic URL recevier) is configured in PI. I have searched and cannot find anything.
Any help is greatly appreciated.

Hi,
If your requirement is to Start/ Stop XI channels externally, do the following:
1. Select the specific channel in communication channel monitoring.
2. Select External Control On for this channel.
3. Use the following URL for accessing the channel based on what operation you need to perform:
a) START: http://<host>:<port>/AdapterFramework/ChannelAdminServlet?party=<Party Name>&service=<Service Name>&channel=<Channel Name>&action=start
b) STOP: http://<host>:<port>/AdapterFramework/ChannelAdminServlet?party=<Party Name>&service=<Service Name>&channel=<Channel Name>&action=stop
c) STATUS: http://<host>:<port>/AdapterFramework/ChannelAdminServlet?party=<Party Name>&service=<Service Name>&channel=<Channel Name>&action=status
(Keep Party Name blank if there is no party involved in the scenario).
If you have a different requirement, I would request you to explain what you are looking for in more detail.
Best Regards,
Pratik

Can not start/stop fullfilment server after fresh install

Can not start/stop fullfilment server after fresh install
Product: e-business suite (11.5.9)
Platform: Win XP 5.1 (SP2)
We have performed a new installation of ebusiness suite in our windows platform.
Installtion went with out any problem.
But we can not start/stop the fullfilment server. While trying to start/stop the server we are getting follwing error message:
c:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih\jtffmctl.cmd start
script returned:
C:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih>echo off
You are running jtffmctl.cmd
Mon 13/09/2004
01:46 PM
"Starting Fulfillment Server for "PROD" on port "9300" ...\n"
"Error returned while running OUI"
ERRORCODE = 1 ERRORCODE_END
.end std out.
Class not found: oracle.apps.jtf.fm.engine.processor.Processor
Please let us know how to fix this issue.
Regards, Kunal

edit the jtffmctl.cmd and make sure that it point to the correct java path, alse try to use java 1.4.1

Creating a Business Service for Start/Stop Application Service in CCB 2.3.1

Hi,
I'm in the process of creating a BPA script that invokes a Business Service to perform a Start/Stop for a given Account ID/Premise ID combination. The Business Service is using the base Application Service: Start Stop (CILCSSEP). I am moving the Account ID and Premise ID, along with the start date and requested by fields to the data area of the Business Service, prior to invoking it. When I invoke the Business Service via the BPA script, it throws the below error message... I'm at a loss because the BILL_ADDR_SRCE_FLG is being set to a default of "PREM" on the Business Service Schema:
A Bill Address Source is required on the address override record. Please enter a valid value.
One of these two is true:
1) The Bill Route Type on this record has a Bill Routing Method of 'Postall', or
2) The main customer on the Account has a Quote Route Type with a Quote Routing Method of 'Postal'.
In either case, the Bill Address Source must be populated with a valid value.
If you need support please supply the following info to system support:
Message number: 3, 59204
Business Service: CMSTARTSERVICE
Application Service: CILCSSEP
Schema:
<schema pageAction="fastChange">
<accountId mapField="ACCT_ID"/>
<df mapField="DEFAULT_FOR_FLG"/>
<startDate mapField="STRT_START_DT"/>
<startOption mapField="STRT_TYPE_FLG"/>
<premiseId mapField="STRT_PREM_ID"/>
<premAddress mapField="ADDRESS1"/>
<premCity mapField="CITY"/>
<startCisDiv mapField="STRT_CIS_DIVISION"/>
<startReqBy mapField="STRT_STRT_REQ_BY"/>
<bldStrtSaSw mapField="BUILD_START_SA_SW" default="true"/>
<accountIdtwo mapField="ACCT_ID2"/>
<mainCustPerId mapField="MAIN_CUST_PER_ID"/>
<billFrmtFlg mapField="BILL_RTE_TYPE_CD" default="POSTAL" private="true"/>
<billAddrSrcFlg mapField="BILL_ADDR_SRCE_FLG" default="PREM"/>
<billAddrSrcFlg2 mapField="BILL_ADDR_SRCE_FLG2" default="PREM"/>
<startStopTelephoneOverride type="list" mapList="OVRD_PHONE">
<accountId mapField="ACCT_ID"/>
<sequence mapField="SEQ_NUM"/>
<phoneType mapField="PHONE_TYPE_CD"/>
<internationalPrefix mapField="COUNTRY_CODE"/>
<phone mapField="PHONE"/>
<extension mapField="EXTENSION"/>
<version mapField="VERSION"/>
</startStopTelephoneOverride>
<startBtn mapField="ACTION_START_SW" default="true" private="true"/>
</schema>
I'm running CC&B 2.3.1 - Any help in pointing me in the right direction to get this working would be greatly appreciated, Thanks!
Regards,
Jack

Hi,
Can you try and do this transaction online and see if the error occurs as well? If so run it with traces on and check for the details just before the error is thrown. ( you can also switch on debug via the service call, but it may be easier to debug when doing this online. ) I am predicting this error will occur also when you do it online.
When you are using an Account with its main Person set up with BILL_ADDR_SRC_FLG as PREM you will need a valide PREM_ID on the CI_ACCT record for MAILING_PREM_ID and the premise needs to have a switch set to YES indicating it is a Mailing Address type Premise.
Good luck
Arjen

Alert Performance Monitor

Hello to all,
I am writing to ask for clarification on the Performance Monitor on Win7 .
I would like to create a custom model that meets the following criteria:
- Add only counters of my interest ;
- Plan the times and days when you will control ;
- Mark all of the user-defined reports ;
- Start the alert on EventViewer \ Logs app and Services Logs \ Microsoft \ Windows \ DiagnosisPLA ID: 2031 Information and sending an email .
I created a new template, select the Create Manually \ Notice Performance Counters \ solezionato and I only those of interest to me such as the CPU and Memory ( MB \ Available )
I can clarify the exact value to be entered in the Limit field , Above and Below ?
Taking the example of Memory ( MB \ Available ) , I wish it would create an Alert when the PC has less than 512 Mbytes free. In this case the limit field should include , 512Mb and selecting Under ?
Setting the Alert performance counters , I will build the model in user-defined reports , but does not allow me to see anything unlike any other option that I put ... in the sense that I did not , however, a route log .
While planning should go on the property.
thanks for answer..

Hi,
Do you mean that you've already known about how to create an alert but not sure about the limit value and you're unable to see anything in the report?
If so...
For the value of the limit, it is a threshold value, choose whether to alert when the counter value is above or below the limit, if you want to start alert under 512 Mbytes, then I think value 512 is just fine.
For the report issue,
"Setting the Alert performance counters , I will build the model in user-defined reports , but does not allow me to see anything unlike any other option that I put ... in the sense that I did not , however, a route log ."
what is the detailed symptom? see this link
http://technet.microsoft.com/en-us/library/cc766130.aspx
To view reports, Local Performance Log Users or Administrator group, or equivalent, is the minimum required to complete this procedure, and Performance Log Users group must be assigned the "Logon as a batch User" user right.
Yolanda Zhu
TechNet Community Support

Apple TV 2 all of a sudden has trouble streaming. I stream from my desktop computer's iTunes for movies, and tonight it started stopping randomly mid movie and saying it wasn't connected. Any ideas? Router? ATV dying?

Apple TV 2 all of a sudden has trouble streaming. I stream from my desktop computer's iTunes for movies, and tonight it started stopping randomly mid movie and saying it wasn't connected. Any ideas? Router? ATV dying?
It just says not connected, and as soon as it bails to menu, it connects again and will play for another minute before doing the same thing all over again.

Hello David,
Thank you for contributing to the Apple Support Communities.
It sounds like your Apple TV is having trouble streaming videos from iTunes on your computer. This symptom could have a variety of causes, and I'd suggest the following initial troubleshooting steps.
In addition to restarting your devices (Apple TV, computer, router), try the tips in this article, starting with "Check your home network:"
Apple TV (2nd and 3rd generation): Troubleshooting playback performance - Apple Support
All the best,
Jeremy

Who start/stop Performance Monitor

Similar Messages

Maybe you are looking for