Who to pass from OS X 10.4.11 to OS X 10.5.4

Hello dear Madam and dear Sirs,
I had recovered, after several year my old iMac power PC G4 (800 MHz/ 768 Mo SDRAM) and I would like to restore it and up grade it with my two CD install 10.5.4).
Is it possible? because currently my G4 "say" Impossible to do it.
I have another problem, I cannot used my apple ID on this G4 on iTunes store, is it due to a bad version of OS X?
Many thank's to your answers.

Look at it like buying an audio CD. when you buy a CD you can play it wherever you like, but you are not allowed, for example, to copy it and sell the copy to someone else, for obvious reasons. The question is over the content of the CD, not the physical CD itself.
Similarly if I have written a book which is published as an ebook, and you download it to read, you are not allowed to make a copy and sell or give it to someone else, because that is in effect defrauding me of the payment for the book.
In the days before digital copies, if you bought a CD or a LP you could sell or give it to someone else because you would no longer have it. Now it's so easy to make digital copies which are indistinguishable from the original, it isn't so obvious to people that they are not allowed to make copies.
Similarly, when you buy a Mac, you buy the operating system which is loaded onto that Mac, and the disks which enable you to restore it if there is a problem. You are paying to use the operating system on that Mac, not anywhere else. This is why the discs are designed to be specific to that Mac (and they also include bundled software and any necessary drivers). To use them to install on another Mac, even if this was possible, is what is called 'intellectual property theft' as you only paid for the use on the original Mac.
If you want to install a higher system on another Mac then this is a separate use, and you have to buy a copy which enables you to do that. Even there, you are paying to install it on that Mac, not any others (though there is no technical block to your doing this, Apple relies on your honesy). Businesses who want to install a system on a number of computers buy a specific licence allowing them to do this.

Similar Messages

Intel iMac running 10.5.8. Belonged to a relative who has passed away. I want to wipe all data and give the iMac to my grandson. I have no install discs. How do I proceed?

Intel iMac running 10.5.8. Belonged to a relative who has passed away. I want to wipe all data and give the iMac to my grandson. I have no install discs. How do I proceed?

Contact Apple (call AppleCare) and for a nominal fee the discs will be replaced. You can do that or purchase Snow Leopard (still availble from Apple for $20) and do an erase and install of OS X making the machine like a new machine.

1Z0-007 and 1Z0-051 can be passed from home???

i had come to know that exams 1Z0-007 and 1Z0-051 can be passed from home at http://oracle.prometric.com/ as this test does not require a proctor sign-in (test supervisor). so does this mean that i could write these exams in my home without visiting prometric centers??? or does that mean something else??
and how about the exam
1Z0-001 Introduction to Oracle: SQL® and PL/SQL™.
please let me know.
Thank you.

i had come to know that exams 1Z0-007 and 1Z0-051 can be passed from home at http://oracle.prometric.com/ as this test does not require a proctor sign-in (test supervisor). so does this mean that i could write these exams in my home without visiting prometric centers??? or does that mean something else??
Online exams are non-proctored, which means that you can take them at your convenience any time, anywhere. Pre-registration is not required. You register when you are ready to take the exam.
Online exams are closed-book exams --- books, course materials and notes are not allowed. You should prepare for them fully and rely on your own mastery of the material.
Candidates who take the online exams are subject to the Oracle Fraudulent Activity policy and must agree to the Oracle Candidate Agreement (presented at the beginning of the exam). You should never have someone take the exam for you. You should never test under a name other than your own, and/or test using more than one name or Prometric Testing ID.
Oracle Certification Program - Online Exams
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=54
and how about the exam
1Z0-001 Introduction to Oracle: SQL® and PL/SQL™.Unlike 1Z0-007 and 1Z0-051, 1Z0-001 exam is not available online.

Field Value not passed from IDOC (orders01) to File Generated

Hi All,
I have added a custom field to a PO at item level (ekpo-Ztest)and Passing it to OUTBOUND IDOC.
In process of passing to IDOC(ORDERS01) i mapped the field to segment E2EDP19001-MFRPN and i see the value in the IDOC when i view it in WE02.
The problem is when i generate a file i don't see the value of E2EDP19001-MFRPN
We are already using QUALF,IDTNR,KTEXT of E2EDP19001 and i see all the values of these fields being passed from IDOC to file generated .
Let me know as i'm missing anything in here
I quick note ,
I see 3 version for E2EDP19 Segment for orders01
Vesrion
002     E2EDP19002                             8     242     02/14/2005
001     E2EDP19001     40A                    5     160     08/19/1997
000     E2EDP19             30A                     3     108     04/03/1995
1)The version 000 and 001 are released but not 002 Version
2)May be i 'm using version 000 and its out put length is only 108 and these fields(QUALF,IDTNR,KTEXT) together occupy 108 and there is no room for my new field but My IDOC dispalys E2EDP19001 and E2EDP19002 and also it displays my new field but its the output file generated that doesn't show the value
Thanks

Resolved Myself
Thanks

Why there is no dependent req. passed from discontinued material ?

Dear gurus,
I set discotinue indicator=1, effective-out date and follow-up material. But, there is no dependent requirement passed from discontinued material material. That is I can't see the dependent requirement for the follow-up material. Anyone tell me the reason? Thanks!
Regards
David

I will test soon. Thanks to all involved.

How to retrieve a message into an html page passed from a servelt?

am new to servlet.
i have a Login.html contains a form having username and a password field.when the form is submitted it goes to VerifyServlet for authentication.
now if the user provide the correct username and password i authenticate him into a new servlet called UserhomeServlet which i have already done. but if the password is incorrect i wanted to take him back to the Login.html with a Error message printed on it passed from the VerifyServlet. i dont know how to do that.
pls tell me if you have any idea.

Hi ,
Try the following in your VerifyServlet doPost / doGet method.
//for simplicity i have defined name & pwd in the same file and compared values from the login.html //
//you can implement your logic //
                 if (name.equals(login)&& pwd.equals(pass)){
          //redirect to UserhomeServlet
                      else {
               out.println("Invalid Login");
               RequestDispatcher rd = req.getRequestDispatcher("/html/login.html");
               rd.include(req,res);
     }bye for now
sat

File Name and File Content not gettinng passed from Proxy to Business Serv

Hi All ,
I have a requirement in OSB , where i need to pick the file from remote Source and FTP the files to Remote Target .Below are the steps which i did to achieve this.
1.Created a FTP Adapter in JDeveloper to Get the files from Source and a FTP Adpater to Put the files to Target.Inboth the adapters i have choose 'Shema is Opaque'
2.Imported the wsdl and jca file to OSB
3.Generated Proxy Service (PS ) and Business service (BS) out of Step 2
4.I edited the Message flow such a way that , the PS is routed to invoke the BS
Aslo i assigned $inbound/ctx:transport/ctx:request/tp:headers/jca:jca.file.FileName to a variable 'FileName' in PS
and in BS service i passed $outbound/ctx:transport/ctx:request/tp:headers/jca:jca.ftp.FileName = 'FileName'
When i tried to activate my session , the file that is getting written to the target has 0 byte.Also , the file name is also not getting passed from PS to BS
Can some one help me with the steps on how to use the Xpath , so as to pass the file name and file body from proxy servive to business service.
Thanks
John

I search multiple shares to find a common file name then create a single output file. I will be doing this search and file creation
for 5-10 different file names. If there is a better way .. certainly open for suggestions. It's working but having issue with
the cmd file for every file and folder I check. It puts this error out for each run of the process.
Error message in LOG file:
Get-ChildItem : Cannot find path 'F:\powershell\-SearchFor' because it does not exist.
Thanks.
I tried your code with little changes and saved in Temp folder.
My CMD file has the below code
PowerShell C:\Temp\Untitled1.ps1
It worked.
Regards Chen V [MCTS SharePoint 2010]

PHP email form - issue with who it's from

Hi,
I've got a referral page on my site where the user puts in their details and a friends details and the form fires off a email to the friend. The form is in HTML and posts it to a PHP file. The problem is I get in the email for who it's from:
from
"Scott Bradshaw"@server74.ukservers.net
I don't want the
@server74.ukservers.net
in their.
Is this an issue with PHP files and forms or is their a way round it? I know I could do a mailto: form but don't want to. What are my options?
Thanks, Scott

I'm making the website for someone and they had the hosting set up already but thanks for telling me. I think this is right what I've done:
function detectSuspect($val, &$ok) {
if (preg_match('/Content-Type:|Cc:|Bcc:/i', $val)) {
$ok = false;
$YourName = Trim(stripslashes($_POST['YourName']));
$YourEmail = Trim(stripslashes($_POST['YourEmail']));
$RefName = Trim(stripslashes($_POST['RefName']));
$RefEmail = Trim(stripslashes($_POST['RefEmail']));
$EmailFrom = $YourEmail;
$Subject = $RefName;
$EmailTo = $RefEmail;
// validation
$validationOK=true;
detectSuspect($YourName, $validationOK);
detectSuspect($YourEmail, $validationOK);
detectSuspect($RefName, $validationOK);
detectSuspect($RefEmail, $validationOK);
if (!$validationOK) {
print "<meta http-equiv=\"refresh\" content=\"0;URL=error.html\">";
exit;
// prepare email body text
$Body = "Hi $RefName,
$YourName thought you would be interested in viewing this online video called A
tale of 2 customers (< 3 mins).
www.easybench.org/ataleof2customers3";
$Body2 = "";
$Body2 .= "User Name: ";
$Body2 .= $YourName;
$Body2 .= "\n";
$Body2 .= "User Email: ";
$Body2 .= $YourEmail;
$Body2 .= "\n";
$Body2 .= "Referral Name: ";
$Body2 .= $RefName;
$Body2 .= "\n";
$Body2 .= "Referral Email: ";
$Body2 .= $RefEmail;
$Body2 .= "\n";
// send email
$success = mail($EmailTo, $Subject, $Body, "From: $EmailFrom<$EmailFrom>");
mail("[email protected]", "Referral details", $Body2, "From: [email protected]");
// redirect to success page
if ($success){
print "<meta http-equiv=\"refresh\" content=\"0;URL=thankyou2.html\">";
else{
print "<meta http-equiv=\"refresh\" content=\"0;URL=error.html\">";
?>
I've also got a feedback form thing too, the script above wouldn't work for it I guess as it's protecting against different thing but what's the best way to protect the feedback form? I've heard of a honeypot thing where create hidden form field.
Thanks, Scott

How to pass from a document pdf towards another

Hello,
I have two open documents.
In javascript, how to pass from a document pdf towards another.
David G

You need to mark each document as "disclosed", in order for them to talk to each other. See the Acrobat JavaScript docs on "this.disclosed".
Leonard

How to use parameter passed from standard page in VO query of custom page

Hi everyone,
I have a custom page which needs to be called from a standard page. Now this custom page is based on some parameters passed from standard page.
How do I catch those parameters i my custom page .
And how to use those parameters in the VO query of my custom page.
Edited by: Bunny on Nov 11, 2010 9:16 AM

Hi,
Bunny wrote:
I have a custom page which needs to be called from a standard page. Now this custom page is based on some parameters passed from standard page.
How do I catch those parameters i my custom page .---If standard page the button style is :Button,Then u can set Destination URL in personalization.
Destination UR:"OA.jsp?page=/xxx/oracle/apps/po/msg/webui/CustomUpdatePG&Flag=" +Value ---Like u can pass params
---IF the button style is :Submitbutton ,Then u need to customization of the co.
---In co processFormReq call a cutom page like below.
pageContext.setForwardURL("OA.jsp?page=/xxx/oracle/apps/po/msg/webui/customUpdatePG&Flag=" +Value, null, (byte)0, null, null, true, "N", (byte)0);
---In custom page co in processRequest u can get these value :String value=pageContext.getParameter("Flag");
And how to use those parameters in the VO query of my custom page.---Get the vo and set where clause
String where="valueAttr="+value;
vo.setWhereClauseParams(null);
vo.setWhereClause(where);
vo.executeQuery();
Regards
Meher Irk
Edited by: Meher Irk on Nov 11, 2010 11:53 PM

RE : Who would benefit from Forte?

RE : Jerry Fatcheric's message about "Who would benefit from Forte?"
With regards the point mentioned in the attached message from Jerry
Fatcheric below, I would like to illustrate my point. I implemented in both
Visual Basic and Delphi, the example that is mentioned in the attached
message, about a browser application, having the capability to browse
thousands of records with the inital screenful needing to come ASAP. It took
me less than 2 minutes to implement this in VB (I timed it). Just threw a
"remote data" control and a "DBGrid" control on a form, set a few properties
and wrote a "select *" sql specifying that only 30 records be returned at a
time. For a table with 4K records, the first 30 came in and got displayed in
less than 2 seconds. In Delphi, the response was even better and whole 4K of
record could be retrieved in less than 4 second. (Yes less than 4 seconds
for retrieving 4000 records from a DB2/NT database running on a remote
machine). Even I could not believe the performance of Delphi which I haven't
used that much. These tools are THE fastest way to get the data from a
database server to a windows client. These will perform any day better than
FORTE. One of the problem that I came across FORTE in one of situations like
this was data movement across nodes is very costly. In one of our
applications, since we stored the data as objects, in a similar situation as
you have mentioned, the performance of moving a lot of data form the server
to the client was not very good and in consulation with FORTE technical
support we had to convert the data in objects to scalar (delimited string),
move across node, and convert the data back to object at a client.
Performance increase - 40 secs. vs 120 secs. earlier.
About my background. I have worked about 8 years in application development
and for the past 4 years have been working in a client server environment.
Being a consultant, I have used many tools, including FORTE for one year, to
provide my clients with the most bang for their buck, which to me is the
topmost priority as a Consultant. I do not decide for my clients what
technology they should use but sure evaluate the various options they have
and recommend more than one solutions, listing the advantages and
disadvantages.
Currently working on coming up with a solution for a client with a customer
service application need with around 50 users now, scaling up to 100 users
in the future. The best solution that I could come up with was a logical
3-tier with the presentation and the business layer running on NT
workstation (client) and the database on NT server (server). With all the
processing on a powerful and healthy (not "fat") client the system, I feel
can scale very well. For a 500 user system, you literally have 500
application server (physically on the client machine) being served by one
data server. To the data server, having a physical middle tier between the
client and the data server, I feel would not help, at least in our
situation. Almost everything that the middle tier could do to reduce the
load on the data server can be handled by the "business layer" running on
the client machine. It does mean that each user connects to the database
directly so in a case of 500 user, there are 500 connections to the database
but lately with the sophisticated DBMS, this is no longer an issue. The DBMS
can manage this many user very economically (read the benchmark about SQL
server with 5000, yes 5k user at "www.microsoft.com/sql") and almost as well
as a middle tier. It is fault tolerant - nothing can bring down the system
except a client failure, the data server failure or a network failure, the
same failure points as a N-Tier solution unless you are replicating or
duplicating the database. In our solution our application is as scaleable as
the database is, and the databases available today are very scaleable if you
look at the current database technology offerings.
As you may have guessed the abovementioned solution is cheaper with a very
fast "time to market" than a forte solution (we started this about 6 months
back and are in production for the past 1 month). This may not have all the
features that FORTE offers, but for our purposes and I feel in similar
applications, what we got was what we needed. By no means, this is going to
meet all information tecnology needs for everyone and in many situations I
believe FORTE would be well suited than any other tool.
I still use FORTE can would continue to do so for some of the solutions that
we develop, but I do not think that one shoud be using FORTE for "any
development that is bigger than a breadbox" as Mr. Fatcheric suggests in the
attached message, simply because if I do that, than I think that in some
cases I would be selling the user a tank when the user just needs a rifle.
I consider giving my clients the most value for their money in getting this
solution developed. I would suggest my clients FORTE when I think they needs
them but would definitely suggest another solution if I think that they can
get their solution developed and get more value for their money using some
other tool. Towards this end I would like to find out what kind of solutions
people are developing and what kind of performance they are getting
specially related to Windows platform.
Any information about the benefits (actual benefits) you are getting from
FORTE would be highly appreciated which would let a lot of us decide when to
use FORTE and when not to use FORTE to meet ours and our clients'
everchanging information technology needs.
- Ari Singh
[email protected]
Ari Singh wrote a provocative piece questioning the benefits of Forte
in "Windows only", non-large scale applications. Rather than get into
a large philosopical discussion, I would like to illustrate my point
with an example taken from a current Forte project.
First, my background: 10+ years in Client server applications. Worked
for several years at Oracle and have experience with Sybase. Worked
extensively with a 2 tiered CS product (Uniface) and write C and C++.
NOT a Windows expert.
In our current application, the requirement is to allow the user to
browse literally thousands of records on the Windows Client. There will
never be lots of users doing this, but the ones that do must have
reasonable performance. Our initial tests indicated that if we simply
had the server pump the data to the client, we would have significant
performance problems and face memory limitations on the PC. SO we
utilized Forte's N-tiered capabilities. When the user starts a query
(using dynamic sql with user controlled WHERE and ORDER BY), we start
an asynchronous retrieval on the server with data is cached in an
anchored object on the server. When the query has found the first
THIRTY (30) records (2 screens worth), it posts an event to the client
and the client request the first thirty. The retrieval process continues
independently while the user can browse data on the client. Not until
the user scrolls down far enough does the client again request more
data. If the user quits from the screen or starts a new query, the
first one is cancelled. Otherwise, the query runs to completion on the
server.
This approach gives us 3-5 second response time regardless of the size
of the query result set. It minimizes the data on the client (moving
us toward a thin client). The kicker is that with the help of Martha
Lyman from Forte, we developed this technique in about 4 hours! Add
to this all the standard inheritance, OO stuff, partitioning,
customized monitoring, etc, etc, and IT IS MY OPINION that Forte
is a GOOD tool for any development that is bigger than a breadbox
and worth the $$$. And that's the way it is.... SO there...
Jerry Fatcheric
Relational Options, Inc.
Florham Park, New Jersey
201-301-0200
201-301-00377 (FAX)
[email protected]

RE : Jerry Fatcheric's message about "Who would benefit from Forte?"
With regards the point mentioned in the attached message from Jerry
Fatcheric below, I would like to illustrate my point. I implemented in both
Visual Basic and Delphi, the example that is mentioned in the attached
message, about a browser application, having the capability to browse
thousands of records with the inital screenful needing to come ASAP. It took
me less than 2 minutes to implement this in VB (I timed it). Just threw a
"remote data" control and a "DBGrid" control on a form, set a few properties
and wrote a "select *" sql specifying that only 30 records be returned at a
time. For a table with 4K records, the first 30 came in and got displayed in
less than 2 seconds. In Delphi, the response was even better and whole 4K of
record could be retrieved in less than 4 second. (Yes less than 4 seconds
for retrieving 4000 records from a DB2/NT database running on a remote
machine). Even I could not believe the performance of Delphi which I haven't
used that much. These tools are THE fastest way to get the data from a
database server to a windows client. These will perform any day better than
FORTE. One of the problem that I came across FORTE in one of situations like
this was data movement across nodes is very costly. In one of our
applications, since we stored the data as objects, in a similar situation as
you have mentioned, the performance of moving a lot of data form the server
to the client was not very good and in consulation with FORTE technical
support we had to convert the data in objects to scalar (delimited string),
move across node, and convert the data back to object at a client.
Performance increase - 40 secs. vs 120 secs. earlier.
About my background. I have worked about 8 years in application development
and for the past 4 years have been working in a client server environment.
Being a consultant, I have used many tools, including FORTE for one year, to
provide my clients with the most bang for their buck, which to me is the
topmost priority as a Consultant. I do not decide for my clients what
technology they should use but sure evaluate the various options they have
and recommend more than one solutions, listing the advantages and
disadvantages.
Currently working on coming up with a solution for a client with a customer
service application need with around 50 users now, scaling up to 100 users
in the future. The best solution that I could come up with was a logical
3-tier with the presentation and the business layer running on NT
workstation (client) and the database on NT server (server). With all the
processing on a powerful and healthy (not "fat") client the system, I feel
can scale very well. For a 500 user system, you literally have 500
application server (physically on the client machine) being served by one
data server. To the data server, having a physical middle tier between the
client and the data server, I feel would not help, at least in our
situation. Almost everything that the middle tier could do to reduce the
load on the data server can be handled by the "business layer" running on
the client machine. It does mean that each user connects to the database
directly so in a case of 500 user, there are 500 connections to the database
but lately with the sophisticated DBMS, this is no longer an issue. The DBMS
can manage this many user very economically (read the benchmark about SQL
server with 5000, yes 5k user at "www.microsoft.com/sql") and almost as well
as a middle tier. It is fault tolerant - nothing can bring down the system
except a client failure, the data server failure or a network failure, the
same failure points as a N-Tier solution unless you are replicating or
duplicating the database. In our solution our application is as scaleable as
the database is, and the databases available today are very scaleable if you
look at the current database technology offerings.
As you may have guessed the abovementioned solution is cheaper with a very
fast "time to market" than a forte solution (we started this about 6 months
back and are in production for the past 1 month). This may not have all the
features that FORTE offers, but for our purposes and I feel in similar
applications, what we got was what we needed. By no means, this is going to
meet all information tecnology needs for everyone and in many situations I
believe FORTE would be well suited than any other tool.
I still use FORTE can would continue to do so for some of the solutions that
we develop, but I do not think that one shoud be using FORTE for "any
development that is bigger than a breadbox" as Mr. Fatcheric suggests in the
attached message, simply because if I do that, than I think that in some
cases I would be selling the user a tank when the user just needs a rifle.
I consider giving my clients the most value for their money in getting this
solution developed. I would suggest my clients FORTE when I think they needs
them but would definitely suggest another solution if I think that they can
get their solution developed and get more value for their money using some
other tool. Towards this end I would like to find out what kind of solutions
people are developing and what kind of performance they are getting
specially related to Windows platform.
Any information about the benefits (actual benefits) you are getting from
FORTE would be highly appreciated which would let a lot of us decide when to
use FORTE and when not to use FORTE to meet ours and our clients'
everchanging information technology needs.
- Ari Singh
[email protected]
Ari Singh wrote a provocative piece questioning the benefits of Forte
in "Windows only", non-large scale applications. Rather than get into
a large philosopical discussion, I would like to illustrate my point
with an example taken from a current Forte project.
First, my background: 10+ years in Client server applications. Worked
for several years at Oracle and have experience with Sybase. Worked
extensively with a 2 tiered CS product (Uniface) and write C and C++.
NOT a Windows expert.
In our current application, the requirement is to allow the user to
browse literally thousands of records on the Windows Client. There will
never be lots of users doing this, but the ones that do must have
reasonable performance. Our initial tests indicated that if we simply
had the server pump the data to the client, we would have significant
performance problems and face memory limitations on the PC. SO we
utilized Forte's N-tiered capabilities. When the user starts a query
(using dynamic sql with user controlled WHERE and ORDER BY), we start
an asynchronous retrieval on the server with data is cached in an
anchored object on the server. When the query has found the first
THIRTY (30) records (2 screens worth), it posts an event to the client
and the client request the first thirty. The retrieval process continues
independently while the user can browse data on the client. Not until
the user scrolls down far enough does the client again request more
data. If the user quits from the screen or starts a new query, the
first one is cancelled. Otherwise, the query runs to completion on the
server.
This approach gives us 3-5 second response time regardless of the size
of the query result set. It minimizes the data on the client (moving
us toward a thin client). The kicker is that with the help of Martha
Lyman from Forte, we developed this technique in about 4 hours! Add
to this all the standard inheritance, OO stuff, partitioning,
customized monitoring, etc, etc, and IT IS MY OPINION that Forte
is a GOOD tool for any development that is bigger than a breadbox
and worth the $$$. And that's the way it is.... SO there...
Jerry Fatcheric
Relational Options, Inc.
Florham Park, New Jersey
201-301-0200
201-301-00377 (FAX)
[email protected]

When mousing over text, the cursor flickers constantly (with each letter passed) from arrow to i-beam and back. The problem occurs in both MS Word and Pages. Any idea of how to resolve this annoying problem is appreciated. System: 10.10.1

When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back. The problem occurs in both MS Word 2011 and Pages. Any idea of how to solve this annoying problem will be much appreciated. System 10.10.1 on a MacPro (Late 2013)

The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
https://www.youtube.com/watch?v=ZNQ0D84DdF4
What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse?

Need help with Link passed from XML

This is to create a flash driven navigation menu. What I have
is a coldfusion page that serves a simple XML formatted page. There
are 3 XML components, linkLabel, linkURL and linkType. The label
just passes text, the type is just a number 0-9 that is used to
determine the style of the button. The linkURL that is passed from
coldfusion comes across encoded for XML, so what I end up with is
url's that replace "&" with ";amp;".
So my question is this, is there an easy way in the
actionscript to replace the ";amp;" with "&"? Other than that
little problem, the rest of the script runs just fine, I just can't
seem to find the syntax I'm looking for to replace items in a
string. I saw the code for replacesel() but this doesn't seem to do
it, unless i'm writing it wrong.

Just in case you want something similar in future:
string = string.split("&").join("&");
is an easy way to replace something in a string (here
'&' gets replaced with '&').
greets,
blemmo

Who have knowledge from Femtocell technology at Sony (Xperia Z2 and Zperia Z)

Contact request for a person who have knowledge from Femtocell technology at Sony (Xperia Z2 and Zperia Z).
I have been unable to resolve mobile data connectivity issues occuring with femtocell. Me and the operator have been trying to find a resolution for 2 months now. The thing is that this problem occurs only with Sony mobilephones. So i would need to find a developer from you who have better knowledgemtnt from the technicalside of your phones.
Solved!
Go to Solution.

Contact your local Xperia Care regarding this issue.
http://support.sonymobile.com/global-en/contactUs/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Standard PO workflow giving error due to Release coe is not getting passed from event

Hi Team,
I am getting the below error while processing the Standard workflow for PO.
I think its due to the Release code is not getting passed from Event to workflow.
Can you please sugest from where the release code is getting fetched before triggering the event.
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS20000075
Following error occurred:
SWF_RUN 594
Message text:
Import container contains errors (are any obligatory elements missing?)
Event container appended as attachment.
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM)

Hi
Please check threads, response by Fernando Carames, ( Jul 19, 2007 2:37 PM): http://scn.sap.com/thread/483005
Or by Trevor Ticehurst on Oct 9, 2008 3:39 PM at: http://scn.sap.com/thread/1080411
OR
http://www.sapfans.com/forums/viewtopic.php?f=26&t=297786
All these mention certian notes which may be helpful.
However, it is important to first ensure that the release startegy is configured and working properly (check with your MM con)
regards,
Modak

Who to pass from OS X 10.4.11 to OS X 10.5.4

Similar Messages

Maybe you are looking for