Who to reverse the OSV if it is reverse what is the future problem in SAP?

Who to reverse the OSV (Asset) if it is reverse what is the future problem in SAP?

CEE6 wrote:
What video format (including embedded audio) is able to be viewed and heard by both OSX Lion users and Windows users?
You have to make a distinction between the container format (eg, AVI, MKV) and the video/audio format (eg, DIVX). For instance, without additional software, QuickTime can play .avi files with the IndeoVideo codec, but not .avi file with the DivX codec). Further, you have to make the distinction between what can be played using an independent player, eg, QuickTime Player, and what can be played within the presentation software (Keynote or PowerPoint).
You can refer to
<http://mac2.microsoft.com/help/office/14/da-dk/powerpoint/item/7acce321-36fb-48d 6-8c76-12cb3a0063ee>
for suggestions. In practice, for presentation clips, I think you're limited to MPEG-2 and MPEG-4. I don't know if an additional MPEG-2 QuickTime component is required under Lion, you'll have to check that yourself. So, in the end, it's MPEG-4. Both Keynote and PowerPoint Win/Mac should be able to handle it.
can anyone suggest a safe application that I can purchase from the apple app store that will allow me to convert video files
What's a 'safe application'? And why do you have to buy it from the App Store (yuck!)?
Handbrake, as mentioned by X423424X, is free and works very well. There are probably others, too.
this forum is the best place to learn
Perhaps, but it may not be the place to get answers to this question. Try a PowerPoint Mac user forum, they would have more experience in these x-platform issues. This forum is oriented more towards the hardware side of the MBP platform.

Similar Messages

  • NI have a Braun Photo Technik slidescan 3600 and it canot make it work with Lion: Is there anybody who sorted out the same problem? thanks

    I have a Braun Photo Technik slidescan 3600 and I cannot make it work with Lion. Is there anybody who sorted out the same problem? thanks

    We sure do have a problem - this is strictly a user to user assistance forum with users helping other users use the iPhoto program as it is - no one here has any ability to change or influnence the desigh or implementation of iPhoto
    try the iPhoto menu ==> provide iPhoto feedback
    LN

  • To anyone who has had the trackpad problem and had it replaced...

    So if anyone has had the trackpad problem where it doesn't click or erratically doesn't move the cursor, and HAS gone to the apple store and had it fixed, does your new one work properly now?
    I have an appointment this evening to have it looked at (and probably replaced) but if this is a consistent problem with all models, its not going to fix it. I am wondering if I should wait until Apple catches on to this, and does something about it.
    Anyone have any success stories?

    My suggestion would be to KEEP your MacBook. There are several other discussions with the same issue.
    It seems as though this issue is widespread.
    Why copy data, wipe the old one clean, trade out for a new MacBook, transfer all the data BACK .... only to find your issue unresolved?
    It's not worth the hassle. My guess? Apple will issue a firmware update for the trackpad issue.

  • I see that there are a lot of people who are experiencing the same problem I am when renting a moving from iTunes.  I keep getting the 5103 error.  Anyone ever receive a solution?  System Clock is set correctly.

    Has anyone ever received a proper response to the dreded itunes 5103 error after downloading a rented movie on iTunes?  What's even worse is that I now can't delete them.  They just show back up when I check for downloads.  This has been going on now for over a month.  Any help is greatly appreciated.

    I found some troubleshooting steps in this article here:
    iTunes Store: Error message 3001, -42110, or 5103 when downloading movie rental
    http://support.apple.com/kb/ts1597
    I hope that helps

  • On my iPad, in iCal, whenever I attempt to go to March 2013 the application closes. I know of at least one other user who has the same problem. Has anyone else had the same experience

    I am using an iPad.
    In iCal, whenever I try to turn to the month of March, the app closes.
    I know of at least one other person who has had the same problem.
    Has anyone had a similar experience and know of any solution?

    Chiave2,
    Why does the month March 2013 not show...: Apple Support Communities, and Why can I NOT select March 2013 Month...: Apple Support Communities may provide you with a solution for your problem.

  • How to configure HR IdM to include persons whose start date is in the futur

    I am exporting employees from HCM 6.0 to IdM 7.0 via LDAP export and VDS.
    How can I configure the export to include also persons whose start date is in the future?
    There is a need to import persons to IdM who start in the future so that the set of default rights would be in place before the user starts.

    >
    Holger Flocken wrote:
    > Are you sure that the users are not exported?
    >
    I can see that by comparing running the SAP Query in HCM and checking out the Staging ID Store in IdM 7.0 Monitoring.
    The query picks up the users but either the ABAP extract program or something in VDS looses the users whose start date is in the future.
    >
    Holger Flocken wrote:
    > You can either try changing the export (I have no clue how that can be achieved) or you adapt the tasks in the HCM_Staging_Area to ignore the validity dates (but you should only do that if you are sure that you do not have multiple values or that you pick the first one).
    > Holger
    AFAIK there is nothing in IdM 7.0 side that could be configured as IdM touches the records after they have been staged.

  • How to Displaying Employee Photo in ESS Who's Who via Reverse Proxy?

    Dear Gurus,
    I have a bit of problem to displaying employee's photo in ESS Who's Who via Reverse Proxy.
    In my landscape, end-users are only able to reach the Reverse Proxy server, not the actual SAP server itself.
    In Who's Who, when displaying the employee's info, the URI for the photo is generated using the actual SAP server name.
    Illustration:
    - the URI we expect: https://portal.domain.com/sap/bc/contentserver?.....
    - the URI we get: http://r3server.domain.com/sap/bc/contentserver?....
    Does anyone know where/how I can set the URL (hostname and protocol part) to refer to my reverse proxy?
    Or is it because SAP is using an absolute path rather than the relative one?
    How do we go about it?
    Thanks in advance.

    Dear Barinbhai,
    How are you? We are fine at here!!!
    Following URL generated thru Portal
    System generated : http://p30app06.ril.com:8000/sap/bc/contentserver/430?get&pVersion=0046&contRep=7N&docId=4D2155EB6C32545BE10000000A42163F&accessMode=r&authId=CN%3DQ10&expiration=20110215052004&secKey=MIIBkwYJKoZIhvcNAQcCoIIBhDCCAYACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAV8wggFbAgEBMBMwDjEMMAoGA1UEAxMDUTEwAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMTAyMTQwNTIwMDRaMCMGCSqGSIb3DQEJBDEWBBTJCER2r9%2BifbQPOtCqJdAoJ99NTzCBpgYFKw4DAhswgZwCQQCJ%2FPuWmHE5m%2Bd1vtX464doAJIsN2SmIpBAUe7jLGtmAD7F6ElSWOtC6uMuXUPisyKr3lRQ6IOC1ZhVPsnnXJsZAhUAtGAwyGWTqdJdd7nwrXKA7T%2B3GVcCQBUQxMBImvHdAsIyF3DmBtPwHcPpyCyBbJ737ivcuw2qjdJeGttSqR8GGuPn0DmzF36%2BUSnLRxZVNPn6nUbnPx0ELjAsAhR7G1vGjngjoll50RhWKcDlBTvVKgIUZ1NlQXMe61LXcqsTGsz7r28Kzh0%3D
    Photo opening directly on following URL:::
    Desired URL : http://ess.ril.com/sap/bc/contentserver/430?get&pVersion=0046&contRep=7N&docId=4D2155EB6C32545BE10000000A42163F&accessMode=r&authId=CN%3DQ10&expiration=20110215052004&secKey=MIIBkwYJKoZIhvcNAQcCoIIBhDCCAYACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAV8wggFbAgEBMBMwDjEMMAoGA1UEAxMDUTEwAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMTAyMTQwNTIwMDRaMCMGCSqGSIb3DQEJBDEWBBTJCER2r9%2BifbQPOtCqJdAoJ99NTzCBpgYFKw4DAhswgZwCQQCJ%2FPuWmHE5m%2Bd1vtX464doAJIsN2SmIpBAUe7jLGtmAD7F6ElSWOtC6uMuXUPisyKr3lRQ6IOC1ZhVPsnnXJsZAhUAtGAwyGWTqdJdd7nwrXKA7T%2B3GVcCQBUQxMBImvHdAsIyF3DmBtPwHcPpyCyBbJ737ivcuw2qjdJeGttSqR8GGuPn0DmzF36%2BUSnLRxZVNPn6nUbnPx0ELjAsAhR7G1vGjngjoll50RhWKcDlBTvVKgIUZ1NlQXMe61LXcqsTGsz7r28Kzh0%3D
    Pls sugget..
    Hitesh Khatri
    SAP -HR
    RIL - Navi Mumbai....

  • HT5295 I have read the other comments of others with the same problem of downloading podcasts and submitted my comment,but there is still no fix to the problem.Does anyone know why the trouble has not been taken care of?Who is the person dealing with this

    the podcast app is not fixed still wont download,did not find any solutions with anyones comments,they all have the same problem with this app.So how can you say the problem is fixed,get someone who knows how to really do something so it is not a recurring topic of frustration!!!!!

    You might get more replies to this (but not from Apple, who you will recall, do not monitor these discussions) if you had posted in the Podcasts for iOS discussions, but never mind. At least in this post you've mentioned that your problem is with the Podcast App, something you didn't mention in your previous post. Consequently, my comments were based on "problems downloading Podcasts", not "problems with the new Podcast App".
    (I don't use the new Podcast App, since I cannot install iOS 5 on my Touch. So I stick with the older method of listening to Podcasts on my iPod.) That said however...
    It cannot have escaped Apple's attention that the new Podcast App has not been well received. Although these discussions tend to focus on what's wrong rather than what's right, it does appear that the App hasn't been well thought out.
    In particular, the Auto Play feature, which - once an episode has finished playing, the "next most recent unplayed episode" will begin. Now, maybe I'm wrong but to me that means that it plays the Podcasts in reverse date order, so episode 19 will play after episode 20 and episode 18 after ep.19! That is how the iPod Classic plays Podcasts by default and the Classic forum is littered with posts from people who think this is barmy. (I think it's barmy too!)
    I use an iPod Touch as well. Although not perfect, playing Podcasts on the Touch is far easier than on a Classic.
    You are unlikely to find any "solutions" to the issues with the Podcast App, because the "solution" is for Apple to redesign it.
    If you are assuming that the update of 25th july is a claim that it's fixed... oh dear! I notice that the App views, shown in the Store, still include that "tortoise and hare" screen with what appears to be the transport mechanism for a reel-to-reel tape deck. That alone tells me there is no real improvement to the App. It really is the worst graphic Apple have ever produced! I'll be surprised if anyone under 35 recognises that graphic as a reel-to-reel tape deck.
    Actually, I have a question for you.
    If you have the Podcast App installed on your Touch, does that mean that the previous method of listening to Podcasts has been removed from your iPod, or can you still access them in the Music App? If you can, abandon the Podcast App and use the old method. If not, please warn me in order that I don't purchase a new iPod Touch until Apple fix this!
    Sorry I can't be the bearer of more positive news.

  • How to find out the oracle level user(sid) who is updating the table?

    Hi everyone,
    I am creating a update trigger which is to look for the user (sid) who is updating the rows in this table. Is there any lower level dynamic view or table I can use to find out the user?
    Thanks for any help.
    Jun

    Hi, please repost this question in the Database section under the SQL & PL/SQL discussion forum
    PL/SQL
    thanks - OTN

  • Hi, I don't know who to turn to: the person who handles all the compter stuff is out of town, This A.M.I started up Firefox and there was a message re an update, I thoght I new just to click on install and wait to re start Firefox. But what I can remember

    Hi, I don't know who to turn to: the person who handles all the compter stuff is out of town, This A.M.I started up Firefox and there was a message re an update, I thoght I new just to click on install and wait to re start Firefox. But what I can remember is that another window opened and asked me to choose 'something' (an icon or banner or?), I thought I must click something (I guess I should read all clearly). Firefox did update to 3.6.4, but it also inserted some sort of what might be called a banner? But it only partly covers the right one- half of my 3 toolbars at the top of the Firefox window. It can't be used for anything as it is just a mess of colors and unknowns, except what looks like a 'top' and what I recognize as a Firefox icon (but only partly visible)!! Now, what it does do is partly hide that whole portion of the toolbars and they are hard to read and in turn make this 'thing' impossible to figure out, if I would care to? I can't find anyway to remove it or use it?? But since the Firefox icon is on it, I guess you should know what it is and how to trash it. I am sorry for this occurrence caused my my carelessness, but I'm not much of a computer person ----HELP! Thank you for any help. Judi
    == This happened ==
    Every time Firefox opened
    == Today, Thrsday June 24, 2010

    The only thing I can imagine: it's a [https://addons.mozilla.org/en-US/firefox/personas/ Persona].
    Tools->Add-ons->Themes
    Here should be the persona (lightweight theme)
    and a button "Remove"
    Click it (button Remove), and it (Persona, this mix of colors) should go away instantly.
    Does it help you?

  • Who has changed the Custom Field value?

    Dears,
    Need to know the information regarding how to fetch that who has changed the Custom field value from PWA/MPP.
    Example:
    There is a PDP (say ProjectInfo):
    There is a Custom Field added to that PDP (say Project Status = In Progress).
    Now for ProjectA, someone has checked out and changed the Custom Field "Project Status" from "In Progress" to "Closed".
    I need to fetch the information regarding who has changed that Custom field.
    In which direction should I move: Event Handlers, PSI???? Any other stuff?
    Thanks & Regards,
    Shravan

    Hi Shravan,
    I'm not a developer but I do know that you can use an event handler pushing the resource name and date in custom fields.
    Another way is to use a 3rd-party tool like
    FluentPro Audit Tool.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • I am receiving a new ipad (3 i guess) from my mom who is in the U.S but i am currently in the philippines. I ofcourse, want to have apps,games,movies etc. can i use an itunes giftcard (also from the U.S) to buy my apps without any problems?

    i am receiving a new ipad (3 i guess) from my mom who is in the U.S but i am currently in the philippines. I ofcourse, want to have apps,games,movies etc. on it. can i use an itunes giftcard (also from the U.S) to buy my apps without any problems?

    No.
    iTunes terms of service:
    The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance.

  • How can I find the user that created a user account and the user who last updated the account

    How can I find out who created a user account and who last updated the account. I think that this is the same information that is displayed in the description field on the General tab.
    I am using ADO commands and vbscript
    ug3j

    I should point out that there are two attributes of all AD objects that can help you track down the correct information in the system logs. These are the whenCreated and whenChanged attributes. This will tell when the object was created and when it was last
    modified, which should help when you search the logs. Also, while whenCreated is replicated to all DC's, so they will all have the exact same creation time, the whenChanged attribute is technically not replicated. The date/time on each DC reflects when
    the last modification was replicated to that DC. The values will differ slightly on each DC, reflecting how long it took for the change to replicate.
    Richard Mueller - MVP Directory Services

  • How to find who has deleted the objects in 10g

    All,
    On 10th feb i have created a sequence (M_KEY_SEQ) as per my user request.
    But i could not find the sequence in the database now, Could any one please tell me
    how to find out ..who has dropped the sequence, (looks like some drop actions has been carried out from my user side, we suspect those drop jobs might dropped this sequence but we dont have correct information about who has dropped it..so we cant tell them that you have dropped).
    Any suggestions please...
    No auditing enabled in our database.

    If you dont mind ..could you please explain me how to use DBMS_LOGMINER to find out the deleted sequences

  • System log - how to find out who has deleted the req from cube.

    ^hello friends
    how can i find out who has deleted the request from cube ?
    i wanted to check the system log , that who has deleted the request from cube .
    could you please let me know how to check the same ?
    regards
    manoj

    Hi,
    Did you try the method I had suggested. It will work.
    Also its better to try the path I had suggested as it will display the logs for that particular Cube only.
    But if go through SM37 > B_DEL* it will display all the logs for all the deletion jobs not just this cube and it will be difficult to find out.
    Try that and you should get the log.
    Thanks,
    JituK

Maybe you are looking for