'Whoosh' sound heard when sending an email, immediately...

When I send an email with a particulary large attachment (I have a slow internet connection) I often hear the 'whoosh' sound played immediately, even though it's quite clear the email coulnd't have possibly been sent so quickly.
I think this has led to me sending an email, hearing the 'whoosh' sound and immediatley shutting my Macbook lid, putting it to sleep. Subsequently, the email never gets sent until I open Mail on my Macbook again.
This is annoying because I've 'sent' an important email recently, and then found it never reached its recipient and was sitting in the Mail outbox when I used my Macbook a few hours later.
Any ideas?
Thanks, in advance
*This issue didn't seem to occur when my Macbook was running OS X Lion.

How is this iPhone related?

Similar Messages

Using JProgressBar when sending an email

Good day to all! How can I use the JProgressBar to monitor progress when
sending an email? I am using the Email package by Jakarta Commons.
Somehow, I need my application to display progress since the send( )
function takes a considerable amount of time to complete.
Regards...

>
I Want to learn how to send email . Could you please
tell me how to send email. and also give me some
sample Code . so that i can Understand
Sure. :) I just used a simple-To-Use API of Jakarta Commons Email, which is
built on Java Mail. Their main site may start you off through simple examples.
Go to this page: http://jakarta.apache.org/commons/email/userguide.html

When sending an email I used to be able to add a distribution list from my contacts, I now have to add each email address individually, does anyone know how I can add the whole list?

When sending an email I used to be able to click on a distribution list in my contacts and it would add all the email addresses, I now have to add each email address individually and this takes a lot of time. Could someone tell me how I can add a distibution list/group to my emails?

Barney,
I have four groups.
I just typed the name of one of those groups in the To field on the iPhone's email, and received:
Invalid Address
"<group name>" does not appear to be a valid email address. Do you want to send it anyway?
I clicked continue and it remains in my outbox.
Help is appreciated.
Thanks,
Michael

HT4993 How do you turn the weird sound off when sending a text using the iPhone 4S

How do you turn the weird sound off when sending a text using the iPhone 4S?

Go to Settings-Sounds-Text Tone and change to None. You're referring to the sound when posting a message to someone else, correct? The only issue is if you set to none, you will not hear the incoming either.

When I click attach when sending an email with an attachment I get a dropdown that says "single image" or "default multiple". I choose one. Nothing happens as far as offering a choice as to what doc or photo to attach. What do i need to do?

When I click attach when sending an email with an attachment I get a dropdown that says "single image" or "default multiple". I choose one. Nothing happens as far as offering a choice as to what doc or photo to attach. I continue between the attach and attachment and still nothing .What do i need to do?

Hmmm, Permissions are messed up somewhere!?
Can you open to pic say in Preview, select All, Copy, 7 Paste into Mail?

When sending an email to several people I can't find the address book icon in the tool area

when sending an email to several people I can't find the address book icon in the tool area that used to be at the top of the Leopard system...if you have 20 individual addressees how do I access my address book? j

If you don't see the "shadow man" icon, right click the toolbar and select customize.. drag the icon up to the bar.

When sending an email to multiply recipiants, using address autocompletion, all the address boxes convert to the name in the first box

I use Thunderbird for my email. When sending an email to multiple recipients, I use autocompletion from my local address book. When I select an additional recipient, the name initially appears correctly in the address box. Each time I drop down to add another recipient, the names in each box all revert to the name in the first box. I've used Thunderbird for 2 years and this just started today. Also, the cursor and names in the address box appear now in red instead of black. Hopefully you can solve this problem.
Thank you,
bradoc

There are some evil bugs in the current version of Thunderbird. You may find it works better if you click with the mouse, or move down with the arrow keys and click or use tab. IIRC, there's an issue with use of the Enter key. Or maybe the other way round ; please experiment. It's one of those frustrating bugs that seems to affect everyone but me.
You can download older versions here:
https://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/
I believe 31.2.0 is free of this particular issue. 24.6 seems to be a popular choice for those who dislike recent changes in the Composition window UI.

Getting errors when sending/receiving email

Hi there I have only just updated to Windows 10 from 8.1 nd am able to receive mails On outlook 2013 but continually get the following error message
Task '[email protected] - Sending' reported error (0x800CCC13) : 'Cannot connect to the network. Verify your network connection or modem.' I have tried everything but cant get it fixed can someone help Thanks Bryan

Same thing here Fresh install of windows 10 and Outlook 2013 Receiving emails but getting the same error message when sending and emails stuck in Outbox. Tried all available options in account settings but it doesnt make any difference. Strangley enough though when initially setting up the mail account it sends its test email no problems. Installed Outlook 2010 to see if there was any difference but the same thing happens.

HAVE A PROBLEM WHEN SENDING AN EMAIL IT STATES IT DOES NOT ALLOW RELAYING

HAVE A PROBLEM WHEN SENDING AN EMAIL IT STATES IT DOES NOT ALLOW RELAYING

You have either entered the wrong SMTP server info or they have blocked the sending of e-mails from outside their network. That message indicates that you are not permitted to send through that server from the network you are using to connect.
Contact them again. There is no magic that will allow you to bypass this.

Notification sounds only when I get email from address book contacts

I am getting constant sound notifications whenever I get email but very few emails really require instant attention. I do not want to hear a sound when I get an email, except when the sender is one of my contacts. What settings do I need to make this happen? Thanks.

OK, perhaps I see the problem now.
Outgoing Mail Server: smtp.gmail.com
http://email.about.com/od/macosxmailtips/qt/et_gmailosxmail.htm
http://islandinthenet.com/2009/05/08/how-to-setup-leopard-mailapp-to-use-gmail-2 /

I updated to ios 5 and now when sending an email it says no subject, do you still want to send ? Can this be turned off ?

I updated my iphone 4 to ios 5. When sending emails now it says " there is no subject, do you want to still send ? " Is there a way to turn that off. I could not find the setting. In ios 4 this problem never happened . Anyone have an answer ?
Steve

There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content.

TS3899 When sending an email using my iphone it always goes to an old email address and not the address set up in settings

I have removed an email address from my Iphone and have added a new one. My new one has been set up in the settings as the default account. When trying to send an email the phone always asks for a password for the old email address and will not use the new address. How do I get rid of the old address and use the new one? I have used the delete account to remove the old email address.

Try chnaging the Default Account in Settings > Mail, Contacts, Calendars.
You can also try to Reset All Settings from Settings > General > Reset.
If neither of those work, try restoring the iPhone.

When sending an email using outlook can you attach another email?

When sending a new email using outlook, is it possible to attach another email?

What does that have to do with iPhones?

Error 1172 occurred when sending smtp email via labview

I found these two useful vi example to send smtp email using Labview:
http://decibel.ni.com/content/docs/DOC-7451
http://decibel.ni.com/content/docs/DOC-2401
However, I got error 1172 saying "No connection could be made because the target machine actively refused it 74.125.91.109:587". I'm using gmail to send emails and pretty sure that all the settings in the VI are correct. According to http://mail.google.com/support/bin/answer.py?answer=13287, I tried both 587 and 465 as the port, and nothing would help. 587 will give the 1172 error and 465 will hang the vi for a while after stopping it. This 1172 error is unlikely due to the suggestion from the 2nd link, "Note: If you receive Error -1172 with this example, try logging into the Gmail account with your browser. This error can occur with Gmail accounts that have been inactive for a period of time. You must log in with a browser and verify CAPTCHA text to reactivate the account." because the error kept on even when I login to my gmail account.
I got myself a solution from http://stackoverflow.com/questions/2737823/unable-to-send-smtp-mail-with-net-network-issue, which says to turn off the antivirus software. I turned off McAfee on my PC and it did work. Now, I'm able to send email, even when I log out my account. However, I'm not happy since I have to keep my antivirus off. My question is, is there any way to walk around this issue? i.e. being able to send email with antivirus on?
My 2nd question: how to send message to multiple recipients? The string array to the "recipient" does not work, and the form of "[email protected];[email protected]" does not work neither. Do I have to create multiple property nodes for the recipients or better way to do it?
Many thanks
Message Edited by holyna on 06-14-2010 11:34 PM

Hi Bhuvanesh,
I noticed that the original thread here hasn't been updated in over a year. In the future, it will be helpful if you begin a new topic for your issue.
I will first address your second question concerning sending SMS messages using LabVIEW. The only way LabVIEW can send an SMS text message is by passing an e-mail to the appropriate SMS gateway service. This gateway will vary by cellular provider. You will need to obtain the SMS gateway service information for each carrier you wish to push text messages to.
As far as the error you are receiving, we will need more information in order to narrow down your problem. What is the exact error message you're receiving? Are you receiving "1172: No connection..." or some other variation? A screen capture of your code would also be very useful.
Regards,
Andy C.
Applications Engineering
National Instruments

Why can't I attach a file when sending an email [in firefox]

When I am sending an email in fire fox I am unable to attach a file. When I click the button,nothing happens. I am able to attach files when I use a browser other than fire fox.
Can you tell me why this happens only in fire fox.
Regards
Ron Colburn

g-mail,att,live,ymail''ronc007 [[#question-1040083|said]]''
<blockquote>
When I am sending an email in fire fox I am unable to attach a file. When I click the button,nothing happens. I am able to attach files when I use a browser other than fire fox.
Can you tell me why this happens only in fire fox.
Regards
Ron Colburn
</blockquote>

'Whoosh' sound heard when sending an email, immediately...

Similar Messages

Maybe you are looking for