"whoosh" sound when making a selection in iTunes.

Since the ver 8 upgrade I've noticed a low "whoosh" type sound when I move between fields and when I select a new song in a playlist. It is like some sort of "selection verification" sounds. It is pretty annoying -- it seems to be a bit delayed and sometimes it goes off 2 or 3 times for no real reason. I tried to find some way to turn it off but to no avail. how do I turn it off? Assistance would be greatly appreciated.

I found the fix on the post listed above. I have the Wacom Bamboo tablet -- I use it in PhotoShop. I followed the below instructions and it fixed the problem. There are several other possible solutions on this post. Anyway, here is the post that helped me:
SOLVED the problem on my Vista 64 machine. I use a Wacom tablet in Photoshop and it automatically activates Vista's Tablet input software which is uanessacry because you control the tablet options in Wacom's software anyway.
Go to Control Panel > Programs and Features. Click on Turn Windows Features On or Off. Scroll down to "Tablet PC Optional Components" and uncheck the box. It will take a few minutes and then display a restart dialog box. Restart and Voila!<<
Good luck to all!

Similar Messages

  • My podcasts do not show the pictures only the sound when I import them to iTunes from Garage Band.  How do I get the pictures to show up in iTunes?

    My podcasts do not show the pictures only the sound when I import them to iTunes from Garage Band.  How do I get the pictures to show up in iTunes?

    Well, all I can tell you is that if your file is an m4a with chapter markers, those markers having suitably sized images attached, and you drag it into the Music area of iTunes (so that it appears as a song) in List view, when you play it and then command-click on the small image in the header (next to the progress bar) you should see your embedded images.
    If this isn't happening the best place to ask would be in the GarageBand forum: my own experience of GB is rather out of date and in any case I've never used it for podcasting.

  • How do you reduce/turn off keypad sound when making a phone call

    How do you reduce/turn off keypad sound when making a phone call?

    If I understand the question correctly, it is not about turning off keyboard clicks, it's about silencing the beeps made when manually keying in a  phone number. With keyboard clicks turned off, the beeps still sound when keying in a phone number. If I'm reading the iPhone User Guide correctly, it explains how to turn off keyboard clicks but not how to silence the   beeps when keying in a phone number. The only way I have found to silence the beeps is to put the phone into silent mode.

  • HT4528 Clicking sound when making a phone call

    Clicking sound when making phone call

    I had this happen as well. Restarting my MacBook Pro (8,2) made it go away. At other times it seemed to appear when calling some phones (my wife's iPhone 4 and my son's Samsung phone) but not others (my land line), but this was not consistent. My phone is an iPhone 5. I'm hoping the iOS update due tomorrow will fix this.

  • I've lost the 'whoosh' sound when I send mail.  How do I get it back?

    I used to have a 'whoosh' sound when I sent mail but it has disappeared.  How do I get it back?  I'm using a version 10.9.1 Maverick upgrade.

    Thanx Tony T1.  I have been having issues with mail ever since I 'upgraded' to Mavericks.  Why doesn't Apple leave things alone?  Now I often can't scroll in Mail and have to shut down and restart Mail to get it to work.  That never happened until the Mavericks 'upgrade'. 

  • After updating to Mavericks MAIL no longer issues a "whoosh" sound when sending mail.  Can I get it back?

    After updating to Mavericks MAIL no longer issues a "whoosh" sound when sending mail.  Can I get it back?

    If restarting did not resolve the issue, open Mail Preferences and make sure the box next to "Play sounds for other mail actions" is checked.

  • I downloaded ios7 and now have no sound when I play music on itunes nor do I have it when I try movies on Netflix. I get sound IF I plug in earbuds, but no sound if unplugged! NO SOUND! I get sounds for texts, calls, etc, but nothing else. HELP!

    I do not have SOUND after downloading IOS7. I can use earbuds, but no sound when not plugged in. I cannot play music, hear a movie on iTunes or Netflix. Sound works for incoming calls, msgs, etc, but NO sound for music or movies. HELP!

    Format: Windows Media Audio 9 Standard, Stereo, 44.100 kHz
    Windows Media Video 8, 320 x 240, Millions
    FPS: 29.83
    Data Size: 300.88
    Data Rate: 2464.78 kbits/s
    Duration: 16.59.55
    Normal Size 320x240 pixels
    Current Size 320x240 pixels (actual size)
    I used Mpeg Streamclip last night to take the .mov files to DV, but same thing I put into iDVD and made a disk image. Once all done i opened the image and the videos were there, but no audio.
    This first dvd had 2 of the videos in it the totaled about 90mins. I will try using the higher format. Also with having MPEG streamclip now, I guess I should go back to the .WMV files and try to converting form them? instead of the .mov files.

  • Only static sustained beep sound when making calls!

    Over the past few hours I have noticed when I make a call on my iphone4s (iOs5.1.1, I have not recently updated!) I can hear the person I am calling for about 2 -5 seconds and then nothing OR just static sound and nothing from the person I am calling.
    I can send and recieve texts (over 3g Telstra network)
    I can send and receive imessage
    I can send and receive FaceTime (wifi)
    I can listen to songs and videos online and on my phone
    I can record my voice handsfree and using headphones
    I can not talk to anyone when making or receiving a call! Static or nothing!
    I have full reception
    I am with Telstra Australia
    Any ideas?

    Sounds like you have activated mute button, within a call there should be an option to unmute. The top left-hand button with a microphone does it have a / or a \ through it if so just tap it again & your voice will be heard again.
    The other possibility is that you've put calls on hold.

  • Why does my sound when watching a movie in itunes fall behind?

    Im running Windows 7 64bit and when I watch movies in iTunes, the sound starts running slow.  It gets so bad that it starts cutting out.  If I pause it and hit play again, it goes right for a minute and then starts over again.  Thoughts?

    Try the suggestions in this thread.

  • Is there any way to turn off keypad sounds when making a phone call?

    I am a new user to iphone....is there any way to turn off sounds of keypad when making a manual phone call of someone not in address book?
    Thanks

    If I understand the question correctly, it is not about turning off keyboard clicks, it's about silencing the beeps made when manually keying in a  phone number. With keyboard clicks turned off, the beeps still sound when keying in a phone number. If I'm reading the iPhone User Guide correctly, it explains how to turn off keyboard clicks but not how to silence the   beeps when keying in a phone number. The only way I have found to silence the beeps is to put the phone into silent mode.

  • HT2417 iPhone 4 has no sound when making cellular calls

    I Have a iPhone 4 which works perfectly apart from when making a phone call i can not hear anything been said on the other end and they can not hear me.
    It works fine using Facetime and all sound works when watching videos or any other functions.
    I Have tried the phone on multiple versions of iOS and reseting the phone changing sim cards and also tried it on speaker but still no luck
    Please Help Me Someone.

    I Have a iPhone 4 which works perfectly apart from when making a phone call i can not hear anything been said on the other end and they can not hear me.
    It works fine using Facetime and all sound works when watching videos or any other functions.
    I Have tried the phone on multiple versions of iOS and reseting the phone changing sim cards and also tried it on speaker but still no luck
    Please Help Me Someone.

  • Funny sounds when i play music on itunes!!!

    Just downloaded the new version of itunes. When i play songs on itunes the sound is broken up and is jumping. I can update my ipod and the sound is just fine on that, i can also play tunes on the other media players which too is ok. So there is no problem with my speakers it just seems to be this new version of itunes. If anyone can help, let me know. Thank-you.

    its started after i done the update

  • I have no volume on iPad when playing apps with video like Ellen or Jimmy Fallon.  I have sound when playing You Tube or Itunes

    I have no volume on my IPad when trying to play video from apps such as Ellen or Jimmy Fallon.  I do have sound when I play You Tube or my music.

    1. If Side Switch is set to Mute, check to make sure it's not muted
    http://i1224.photobucket.com/albums/ee374/Diavonex/1237fb40.jpg
    2. Check the Volume buttons
    http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg
    3. Double-click the Home button; swipe the Task Bar to the right. Check the Mute and Volume settings.
    http://i1224.photobucket.com/albums/ee374/Diavonex/acd1c239.jpg

  • MacBook makes new whoosh sound when opening

    MacBook makes a new sound when I open the cover..... Like a woosh, which it never used to do before.  Is there any way to turn off?

    dcnjrich wrote:
    I sent my MBP13 to Apple for repair. The tech indicated that the hinges were lubricated and tightened....and the sound still exists. Atleast I have it documented in the event there is any type of failure. Candidly I'm guessing that one of the magnets is loose as the noise does not occur when the laptop lid is closed.
    If this was my MBP, I'd return it and ask them to fix it correctly, and if they can't, ask about a replacing it (I would miss it while it was gone, but I'd still be able to work on one of my other Macs. If you can't afford the time without it, your situation might be different; obviously that's your call.)

  • Run applescript when airtunes speaker selected in iTunes

    Hi,
    I have a project that involves creating a whole house audio system using airport expresses and an iphone.
    So far so good, best and most cost effective solution.
    As I have an AppleTV I want to leverage it as a place to stream through my A/V receiver. This requires me to manually turn on the receiver, select the 'B' speaker output of the receiver (which connects to stereo speakers instead of the 5.1 satellite speakers which are the 'A' speakers), select the correct input for the AppleTV etc etc.
    I know its not that hard but if you are reading this then you too probably know the warm fuzzy feeling of it all working seemlessly (no comments on this line please......)
    So here's the plan. When I select the "AppleTV" in the speaker menu at the bottom of iTunes (which appears when you have multiple airtunes speakers connected) I want it to run a script that will control a device that beams all of the signals to the A/V receiver to set it up correctly.
    The device is probably another problem to tackle, most likely an arduino project in an arduino forum, but I need a script to initiate this that is triggered by the selection of the speaker in itunes.
    Does this sound possible?
    Dave

    Hi Camelot,
    I used the accessability inspector and got the following report on the airtunes speaker button:
    <AXApplication: “iTunes”>
    <AXWindow: “iTunes”>
    <AXButton: “Apple Hifi (2)”>
    Attributes:
    AXRole: “AXButton”
    AXRoleDescription: “button”
    AXSubrole: “(null)”
    AXDescription: “”
    AXHelp: “Choose which speakers to use.”
    AXEnabled: “true”
    AXFocused: “false”
    AXParent: “<AXWindow: “iTunes”>”
    AXWindow: “<AXWindow: “iTunes”>”
    AXTopLevelUIElement: “<AXWindow: “iTunes”>”
    AXPosition: “x=1692 y=1104”
    AXSize: “w=124 h=20”
    AXTitle: “Apple Hifi (2)”
    AXSortDirection: “(null)”
    Actions:
    AXPress - press
    Can you point in the direction of creating a script to query if the speaker "Apple Hifi (2)" is active? My applescripting is at a basic level and i'd like to learn some more.
    Thanks
    Dave

Maybe you are looking for