Whos Who iview Search

Hi All,
We have a problem with "Whos Who" iview Search option.
It is not searching the users when searched with firstname/lastname/userid and shows message as "No matches have been found". It has worked earlier. Now, Its not working.
But, when I search same users along with "*" character, it displays the corresponding results.
What could be the reason.
Regards
Sunil

Sunil,
Check this out.
http://help.sap.com/saphelp_nw04/helpdata/en/21/ac21410bc3ef23e10000000a155106/content.htm
Good Luck!
Sandeep Tudumu

Similar Messages

  • ESS Who is Who - Add search criteria

    Hi all,
    I have tried searching the forums, but can't find an answer for my problem. I want to add an additional field to the search criteria for the who is who iview.
    I am able to change the advanced search, but I want to add a search criteria on the first screen. Changing the service for the adress book (Employee Self-Service -> Service-Specific Settings -> Address Book -> Who's Who -> Who's Who (ESS): Selection and Output) does not change this first screen.
    Anyone know how I can make this change?
    Thanks in advance.
    Kind regards,
    Marlies

    If by selecting fields you mean in the Who's Who (ESS): Selection and Output, then yes.
    I have there available 3 tabs, none have the default settings.
    First tab I can set the selectionfields, but when changing/adding a field here, my "simple search" does not change. The changes here are reflected under the advanced search, which is nice, but not what I want.
    I simply want to add 1 additional field to the first search screen, so the user does not have to always use the advanced search option.

  • Preparation failed in trex when using standard Who's who iview

    Hi,
    I have encountered a problem with the standard Who's who iview, which makes a simple search in the ume impossible.
    All users "preparation fails" with the following error from Trex monitor > Display queue entries:
    Document ID: /ume/users/USER.PRIVATE_DATASOURCE.un%3Ar5mas.usr, Return Code: 16040, Return Message: SSL: rc=-40 pse_error, Document Status: Prepration failed, Action: Index, Retry Count: 3.
    I'm working on Netweaver '04, stack 9, installed from rapid installer.
    Any help is greatly appreciated.
    Regards,
    Martin
    Message was edited by: Martin Søgaard

    Just in case anyone happens to stumble across this thread via search, the error 16040 means that your user doesn't have permission to read the PSE it's trying to open. You'll get errors like this in one of your trace files:
    [Thr 1224] =================================================
    [Thr 1224] = SSL Initialization  on  PC with Windows NT
    [Thr 1224] =   (710_REL,Jul 15 2010,mt,ascii,SAP_UC/size_t/void* = 8/64/64)
    [Thr 1224] =   found SAPCRYPTOLIB  5.5.5C pl36  (Jul  3 2013) MT,[aesni],NB
    [Thr 1224] =   current UserID: SAPDOMAIN\SAPServiceSID
    [Thr 1224] =   found SECUDIR environment variable
    [Thr 1224] =   using SECUDIR=E:\usr\sap\SID\TRX00\sec
    [Thr 1224] *** ERROR =>   secudessl_Create_SSL_CTX():  PSE "SAPSSLS.pse" not found! [ssslsecu.c   1354]
    [Thr 1224] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
    [Thr 1224]   secude_error 1281 (0x00000501) = "open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned"
    [Thr 1224] >> ---------- Begin of Secude-SSL Errorstack ---------- >>
    [Thr 1224] ERROR in SSL_CTX_set_default_pse_by_name: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] ERROR in ssl_set_pse: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] ERROR in af_open: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] ERROR in secsw_open: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] ERROR in secsw_open_pse_or_extension: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] ERROR in sec_get_PSEtype: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] ERROR in aux_read_PSEFile: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] ERROR in aux_file2OctetString: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] << ---------- End of Secude-SSL Errorstack ----------
    [Thr 1224] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
            for "SAPSSLS.pse" [ssslxxi.c    2278]
    [Thr 1224] *** ERROR => Initialization of SSL library failed -- NO SSL available!
    [Thr 1224] =================================================

  • Dropdowm box instead of Searchfield in Who Is Who iview

    Hi All,
                    I have a requirement in Who Is Who iview that instead of search field I need dropdown box which lists user,groups,rooms etc. Is it possible? I have find the default par file but i couldnt find any code there....,
    Regards
    Balasubramaniam

    Hi Bala
    Give a try with this
    Link:[Link|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/645d4357-0701-0010-07bd-a2ea8c4d0aaf]
    I didnt check whether ur req can be met exactly...
    But this way, i think it can be possible..
    Regards
    BP

  • Who is Who iView: Problem with sorting

    Hi out there,
    I have the following problem: I would like to have the
    Search result generated by the Who is Who iView sorted
    by two properties, that is first by ume:lastname and
    second by ume:firstname.
    The search result will be sorted if I add ume:lastname in
    the "Search Result Sort Property" parameter within the iView.
    The question is: How to provide the second sort property?
    Any hint is highly appreciated
    Thanks in advance
    Sabine

    Hello,
    I don't know if it will help but check the who is who manual.
    http://help.sap.com ->Documentation - SAP NetWeaver ->
    pick your version and look for
    "Configuration of the Who#s Who iView"
    please notice that the documentation for EP6 SP2 can be find under
    Knowledge Management - Collaboration - Administration Guide -     
    Making Services Available - iViews with Collaboration Services -> 
    "Configuration of the Who#s Who iView"                            
    Hope this manual give's you some insight. Sort parameters should be explained. I would suggest writing the two separeted by ,
    ume:lastname, ume:firstname
    Best Regards,
    Defour Frederik

  • How-To Guide Who is Who iView

    Hello,
    I found here in the SDN a How-To Guide about configuring the Who is Who iView. But in this guide consists that the TREX is a requirement for this iView.
    Now we don´t use TREX at the moment but we would have this Who is Who iView. Is it possible to implement this iView without TREX and which setting are different between implementation with and without TREX?
    Regards
    Philipp

    Hi,
       Check this thread.
    /message/895166#895166 [original link is broken]
    This iView uses both TREX and KM. Both together helps in indexing and searching.
    Regards,
    Harini S

  • Where to find the "Who is who" iView

    Hi,
    I am searching for the Who is who iView, but I was not able to find it yet....
    Maybe someone knows where I could get it from?
    Thanks and regards,
    Dominik

    Hi Dominik,
    great to be of help!
    Please mark the thread as solved, so other users can see this from the thread list. You can just do this by using the blue star
    Best regards and a nice day,
    Robert

  • Adding Field to Who's Who iView in ESS

    Hi,
    We have EP 7.0  and have deployed ESS/MSS 1.0.  I want to modify  who's who iView in Employee Search.
    In who's who iView there is field of Organizational Unit which display searched employee organizational Unit. But i want to modify that field.. i.e i have created z-table which stores division / department of every employee.
    Thus this organizational unit should display department from z-table created not default value which it picks up..
    According to my understanding there is BAPI BAPI_EMPLOYEE_GETDATA which does fetching of data, thus anything needs to be done with this BAPI. or is there any other simple way to do this...
    regards,
    Jigar Oza.

    Hi,
    Hope this is useful:
    Re: Change User Details iView! (From Who Is Who results!)
    Rgds,
    Anagha

  • Employee Photo in Who's Who iView

    Dear all,
    I need to display the employee photo in the ESS (Webdynpro) Who's who iView. Please let me know whether I can use KM for storing the employee photos and displaying it in Who's Who iView. If possible please let me know the config steps / guide regd the same.
    Thanks,
    Vasu

    Dear all,
    Thanks for the reply. Actually i need to display the  photo in Who's who iView(com.sap.pct.erp.ess.whoiswho iView) which is in ESS business package . Since we don't have content server in our landscape, Please let me know how we can configure the Who's who iView(com.sap.pct.erp.ess.whoiswho iView)  to display the photo from KM.
    Thanks in advance,
    Vasu

  • Problem with "Who-is-who"-iView

    Hi,
    I wanted to integrate the "Who-is-who"-iView as it is described in SAPHelp (<a href="http://help.sap.com/saphelp_nw04/helpdata/en/21/ac21410bc3ef23e10000000a155106/frameset.htm">Configuration of the Who’s Who iView</a>).
    But it doesnu00B4t work. In the ume\users repository there is a list of all users but the file size of each user is 0 bytes. When I click on a user name I get the following error: <b>"Item not found
    The item you are attempting to access is not available. Check that the name or link is correct. You might also check whether the associated repository is currently accessible."</b>
    And the indexing monitor shows for the ume-index: "2 IN PROCESS, 240 ERRORS".
    We have SAP Portal 6.0.13.0 (KM is the same version SPS13).
    Thanks for help.
    Regards,
    Sven

    Hi Sven
    I think you can solve the problem using the instructions from SAP note 880646.
    We encountered the same problem, and as I recall it is caused by the installation/upgrade of SPS13 (which is buggy).
    Best regards,
    Martin
    Message was edited by: Martin Søgaard

  • User Photo physical location in Who Is Who iView

    Hi ,
    Could you please let me know where will be the user photo physical location after uploading with Who Is Who iView.
    Thanks

    Hi,
    from UserPhotoService class I can see method getPhoto, where:
    public InputStream getPhoto(String uniqueID, String type)  {
    IUser user = getReadOnlyUser(uniqueID);
    byte photo[] = user.getBinaryAttribute("com.sap.ip.collaboration.ume", "photo" + type);
    return new ByteArrayInputStream(photo);
    So I would assume, that the photo is uploaded into the UME.
    Romano

  • How to customise the R/3  screen for Whos Who iView?

    Hi All,
       I am doing ESS implementation for R/3 4.7 on EP 6.0 WebAS 6.40 with Bussiness Package 50.4. 
       The Who's Who iView is showing me some unwanted boxes
    in R/3 which I need to remove them off completely.
       So help required.
    Thanks in Advance,
    Pavanmeet Singh.

    Hi Pavanmeet,
    You can get the IAC component for the who's who and then modify it. The who's who IAC component comes under two themes one under theme 99 and other under 02(i dont remember exactly). May be in the iview you can point to the other theme and check if the screens are coming good.
    The IAC should be under the ITS server ( where ITS is installed) or where the IAC components are placed when you download the business package of ESS.
    The path should be something like this.
    c:/program files/SAP/ITS/../99/filename
    Regards
    Arun

  • Link in the Who is Who iView for ITS Service

    Dear All,
    Can you please guide me where exactly i have to mention the link for the Service which i have to use from the ITS for the who is who iview?
    I am getting the error as
    No Service Name specified
    Your request didnot contain service name. Please specify service name in the URL path
    Example URL
    http:
    .....\scripts\wgate\pz01\!
    I am not understanding where to specify the path exactly.
    Regards,
    Samir

    Hello Samir,
    Are you using standalone ITS.
    If u are using itegrated ITS then mention the below parameter in ITS of ur portal system.
    ITS HOST NAME: <host_name>:<port>
    ITS PATH: /sap/bc/gui/sap/its/
    ITS PROTOCAL: http
    Regards
    Deb

  • ESS: Who is who ~ Advance Search

    Dear all,
    I have a query rearding the who is who ~ advance search and I am looking for feedback or guidness to solve this issue.
    When I go to advance search I get the input fields like
    position
    organizatinal Unit
    Job
    etc
    My cient has a requirnment to have "input help", drop down values,  for the these position so that employee can easily search.
    regards and looking forward for your tips and guidness

    Thanks bala for your reply.
    Bala * you mentioned about changing the WDJ code , can you please elaborate this
    I need to have the input help, dropdown values for organizational units, jobs and positions.
    A friend of mine mentioned to me that this requirnment might be possible through OADP. but as per my knowldege OADP is for MSS so how can I use it for ESS.
    Secondly this  who is who is is using a sap query and it is fetching data from R/3 as per fields mentioned in infoset. If I can get the F4 help , dropdown, in R/3 then how come i canot have the same in portal.
    looking forward for your feedback
    Regards

  • Display photo in Who's Who iview.

    Hello friends,
               I want to display photo of employee i who's who iview.
    We are uploading photo in portal but we uploaded it on ECC 6.0 in infotype 0002. Also i have checked all customization in ptarq. On development client employees photo displays but on production it was not showing.
              Can any body help and please tell me what is the problem.
    Thanks,

    Thanx Chris  for your reply.
          I have uploaded photo on my R/3 production server and i can see it in PA30.
          Also i inform u that i can see photo on development client also where i have also uploaded photo.
          So please tell me correct solution.
    Once again thanx.

Maybe you are looking for