Whou00B4s who node is missing

Hi everyone,
I`m working with a SAP ECC 5.0 version and I have activated the EA-HR extension set (BC set) in order to do the customizing of ESS.
Nevertheless, in the IMG I do not have the "Who´s who" node available.
(I have nodes available to customize other ESS services: eg Benefits and payments, personal data, career and job, etc)
Does anyone know what step could be missing?
Thank you
Regards

Hi Chris,
Thank you for your guidance but my client is not using the ITS version of ESS. We are customizing a portal 7.0.
Is the node under ITS useful in this case?
I have made some customizing settings in this node (service PZ01) but the changes are having no effects. No customizing order is being generated!
Any suggestions of how to achieve the customizing of this service?
Thank you a lot.
Regards

Similar Messages

URGENT:LWF Node is missing: Function INUCD adition to INN1?

Dear Experts,
We have applied Support packages : BASIS - SAPKB62062 and
SAPKB62063
ABAP - SAPKA62062 and SAPKA62063
HR - SAPKE47045 to SAPKE47074
Now in spro LWF node is missing and system is showing an run time error.
I have gone through the SAP note 973398 and done the initial IMG
changes as per note but i couldn't able to do changes in Schema INN1 .
as per note it says:
"Schema changes:
In the standard payroll schema, the payroll
function INLWF is no longer used at sub schema INN1 to compute the LWF
contribution. Instead now payroll function INUCD is called with
appropriate parameters. The schema in all the clients should be
adjusted accordingly."
I tried to change existing INLWF with INUCD but system is asking for
parameter is required, can any one tell me how i can maintain the
parameter.
Thanks and Regards,
R.B.Paramshetty __.____._

Hi,
First find out the relevant Function Module from WE57 tcode.
After getting the FM , u see the sorce code mentionjed in the FM which will fill the relevant Segmnets.
Also check the code whtehr it fill the mandatory segment YMMSMBEW.
Mostly this logic is missing in that FM.
Rvert back if any issues,
Regards,
Naveen

Error: Obligatory node 'E1MAKTM' missing in the structure

Hello All
   I extended material master IDOC.
After extending, the segments look like this:
ZMATMAS05
     - E1MARAM
            - ZEXTENDED_SEGMENT
            - E1MARA1
            - E1MAKTM
            - E1MARCM
so on and so forth.
When I create idocs, I get a message saying that the message is successfully sent. When I see in SM58, I see the message "Obligatory node 'E1MAKTM' missing in the structure".
The idoc which is created has E1MAKTM segment, but it is still giving the error.   Am I extending at the wrong position?
Thanks
Naga

looking at this
ZMATMAS05
- E1MARAM
- ZEXTENDED_SEGMENT
- E1MARA1
- E1MAKTM
- E1MARCM
makes me just feel that all your segments are at the same level.
but usually the E1MAKTM is a sublevel to E1MARAM
so it should look like this:
ZMATMAS05
- E1MARAM
- -ZEXTENDED_SEGMENT
- -E1MARA1
- -E1MAKTM
- -E1MARCM
- - -E1MARDM

Obligatory node 'E1KONP' missing in the structure

Hi Experts,
I am extending cond_a04 idoc. am adding the custom segment as the child segment of E1KONH. Am populating the custom fields of this segment in an enhancement in LVKOEF01. This segment is populating and the idoc is successful but its not reaching PI side. In SM58 it shows status text as "Obligatory node 'E1KONP' missing in the structure" and the function module it shows in SM58 is "IDOC_INBOUND_ASYNCHRONOUS". Am confused. When sent without this extended segment its reaching PI side. What might be the problem??

hi
they have imported and updated the idoc definition.
Problem solved.
Need to check the structure in IDX. structure in IDX was wrong. when changed this it is reaching PI.Thanks.
Regards
Sridevi S
Edited by: Sridevi Sivanandam on Aug 5, 2010 2:59 PM

Obligatory node 'ZMAT_SPO' missing in the structure IDOC

Hello,
Scenario is : File - IDOC
I am trying to post the contents of the file into Matmas
The file gets picked and shows up a red color flag with the error : :Obligatory node 'ZMAT_SPO' missing in the structure Matmas04 Matmas04 "
I tried by disabling segment ZMAT_SPO, tried mapping to a constant.
nothing worked
When I copy the payload from moni, and do test in MM, its successful
What could be the problem?
thanks
nikhil.
Edited by: nikhil a on Jan 21, 2008 9:52 AM

Here is the error message:

<Trace level="1" type="T">Message-GUID = 8F7E3AA0C7FD11DC9E5600132165C741</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0000</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0000</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
I disabled that field in the course of MM in IR
do I need to reimport when i do this? i dont think so .....
nikhil

Please guide me:LWF NODE IS MISSING

Dear Experts,
We have applied new Support packages : BASIS - SAPKB62062 and
SAPKB62063 ABAP - SAPKA62062 and SAPKA62063
HR - SAPKE47045 to SAPKE47074
But in spro LWF (Labour Welfare Fund ) node was missing and system was
showing an run time error.
I have gone through the SAP note 973398 and done IMG changes in Tables
: V_7In0p_all, V_t7INU1, V_T7INU3 and (V_T7INU5)
BASE WAGE TYPE:Created base wage type by copying /140
SM30:
table V_512W_D maintained the processing class 20 with specification
3 for wage type basis and checked the cumulation class 40.
PE51:
I have edited the HR form and transferred the wage type
Schema Changes:
I have made changes to Schema IN00> INN1 we have delimited the old
LWF funaction INLWF and incerted new function as per sap note as
INUCD -
here i have maintained the parameter LWF, basis wagetype , -- and
01 (Universal grouping).
PCR Change : Sytem was throughing an error saying that "STOP: No rule
in key INCS******".
I have copied INCS and created ZNCS incerted basis wagetype init.
now while running payroll error is not there,
but wage type is not appearing either in RT table or in payslip,
has any one come across LWF missing , what are the steps you have followed.
I am missing something.
Please guide me.
Thanks in advance
Paramshetty.

hiii,
Please find the screeshot.Differeniace is coming in the tax on totl income as after calculaton it should be arnd 19k,Please help.
I hope screenshots are clear to you.
Thanks

SQL Developer Tables Node is missing from when expand connection

Hi,
I'm getting this issue often when I expand the connection node (Oracle DB connection), the Tables node is missing from the object types tree. Even if i close the SQL developer and come back it would be the same.
Is this a known issue? I've seen this both in 3.0 & 3.1.
please advice.

Hi,
Just as an update: I did not encounter the issue anymore since my last post (ca 1 week) and I did not do any changes to sqldeveloper any more (never did an export / import of connections, no change in version of JDK any more etc.).
I guessed this here could be my issue: SQL Developer: Not able to view tables
excerpt: "The problem occurs when SQL Developer 3.0.04 connects to a limited privilege schema via a shared server connection. The workaround is to connect using a dedicated server connection."
I use type "Basic" for all my sqldeveloper connections, so no TNSnames.ora entries containing the line "SERVER=DEDICATED" and I did get same issue also when connection using a custom created user having the DBA role.
Therefore I guess this is here is more likely to be my issue: SQL Developer: Not able to view tables
excerpt "JDBC driver having to do with 'Out Of Band Breaks' - basically a low level TCP issue.
To enable the workaround, a Java system property needs to be set - oracle.net.disableOob=true. "
Very often when I did have the issue I closed SQLDeveloper and used Toad for the rest of the day (or a few hours). Next time launching SQLDeveloper the tables node usually was back again. So this could fit into the picture, right?

Obligatory node 'E1OILKV' missing, Not getting'12'Status fromR/3 to XI Port

Hi,
I am sending the Customer Master Data from R/3 to XI. I enhanced the Idoctype OILDEB06 to ZOILDEB06. I am getting the message code status as 03. "Data sent to the Port". But if i execute the the Report RBDMOIND. It is not moving to status 12. "Despatch Ok".
I Got the error message in the tRFC as "Obligatory node 'E1OILKV' missing in the structure".
I am able to see the structure E1OILKV in the IDoc with data. But why this error is coming.
Could any one can help on this Issue.
Thanks and Regards,
Venkat.

The Idoc is going to the Recieving End only till the General View and Company Code view. E1OILKV Segment comes under the Sales View. Since Sales view is not changed it is not capturing the Change Pointers. If Sales view is avilable in the Idoc it is not going to the XI Port. tRFC gives the error.
We checked for other Idocs Which were enhanced. Those other IDocs{example Cost center,Vendor Idocs} are going.
I tried to send the Standard Idoc OILDEB without the Enhancements. It is going to the XI Port. Once i Send the OILDEB06 With Enhancements. It gives that error.Obligatory node 'E1OILKV' missing in the structure. As i already said, I am able to see Data in this segment using the Idoc editor. But not fully moved to the Configured XI Port.
Thanks,
Venkat.

DMEE - error in conditions for node: node attribute missing for ref. ID

Hi,
I've got an error 'error in conditions for node XXX: node attribute missing for ref. ID XXXXX' - may I kindly ask you to suggest where this attribute need to be specified.
thanks in advance.
BR
Renatas

Hi Renatas ,
When using Reference IDs for Conditioning in DMEE you should give node attribute in the 2nd field of the conditioning ....
look the below example
Arg1-1 Arg1-2 T O Arg2-1 Arg2-2 T O
E2E 1A 3 = SPACE 1
DMEE: node attribute as a comparison value
Definition
Node attribute to be used in a condition. The following values are possible:
1: contents in output format
1A: contents in internal format
2: length
3: counter reading
4: counter reading of segments per file (only for DMEE format tree)
5: counter reading of segments with CR/LF (only for DMEE format tree)
Regards,
Komaravolu

Formula node error: missing right parenthesis

Hi NI community,
I am working with the formula node structure for the first time and I came along this error which I can't fix.
It says it finds a # character, but the strange thing is that there is no character. Is there anyone who can help me with this one please?
Kind regards
Thomas Ruts
Solved!
Go to Solution.

You are missing a right parenthesis on your first long formula. It is in the last half of the formula. You have two left parenthesis, but only one right.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Strange issue in Oracle ASM on Two node RAC where in one ASM node shows all diskgroup while other node shows missing node.

We have Oracle datbase 11gR1 in RAC node with Oracle ASM.Recently our database server got crashed and we are trying to restore back services.
Using Snapshot technologyBusiness copy we had synced all our disk on storage level. Post this when we are trying to start ASM instance on node 1 it is coming and showing all diskgroups but on other node it is throwing errot with missing e diskgroup.
ORA-15032: not all alterations performed
ORA-15040: diskgroup is incomplete
ORA-15042: ASM disk "5" is missing
Expert please share your views.
Thanks,
Tushar

The I/O fabric layer on the other node failed to mount all storage LUNs - resulting in ASM being unable to mount a diskgroup as there are missing disks in that group.
Rebooting is exactly what could be needed to reset the h/w and infrastructure used by that node, in order for it to see all the storage disks again. As node 1 sees all storage disks (and is working), the disk itself on the storage system is intact and usable.
What is the o/s? What is the fabric layer? What is used on o/s for dealing with the I/O fabric layer?

MTE Node Collection Missing

I'm currently working on setting up our CCMS alerts and I've noticed that some of the MTE nodes do not have data or analysis methods assigned to them. I can see that on my CEN some are missing but if I go to another server which the CEN is monitoring, they appear. Can anyone tell me why?

Hi Connie,
There could be 2 reasons why you don't se a data collection method for specific MTE's:
1. The MTE doesn't use an active datacollection method. In that case the application that has to monitored is supplying the monitoring data itself.
2. Someone deleted the methods from RZ21 and RZ20. In that case you have to recreate/import them again.
With regards,
Michel Bal.

T.code CK55 Node is missing in std SAP tree

Hi,
T.code CK55 used for multiple sales order costing, it is available in sap command filed but it is missing in sap standard Tree node
could u help us.
some of components we are not activated how to find such component
Regards
Vinu

SAP Easy access
SAP menu
Logistics
Materials Management
Foreign Trade/Customs
General Foreign Trade Processing
Environment
Sales - Export
Sales
Product Cost by Sales Order
Cost Estimate
CK55 - Mass Costing - Sales Documents
Usually you can find and transaction code/text by Find Icon (Ctrl+F)
Srinivas
Edited by: Srinivasa Maruvada on Nov 24, 2011 11:29 AM

CRM IMG nodes are missing in SOLAR01 - configuration Tab

hi Experts
i am facing very strange issue. I am trying to link IMG nodes from the backend system in configuration tab.
the IMG nodes are available in backend system from SPRO , whereas when i try to add the IMG object from the configuration Tab in solar01, these nodes are not available for the selection.
Does any body faced these kind of situation.
Please help with the solution
Thanks
Sol man

Hi,
Make sure that those nodes are selected in the IMG project scope. This can be seen at SPRO_ADMIN for the IMG project, under tab "scope".
If the nodes are not selected, select them and generate the project IMG.
best regards,
Fabricius

Formula node error: missing left parenthesis

Hi guys
I am new on labview and i am strugling to right a bit of code.
I am using formula node and i keep getting the error as above on the title moreover it displays: Error on line 5 is marked by a '#' character: " for {# H = 00.00.00 to H = 06.00".
I am attaching my file so that if you can give me a hand you could have a brief look.
Thank you
Solved!
Go to Solution.
Attachments:
time_look up test.vi ‏14 KB

Hi inaslab,
still your formula node doesn't make sense: You still overwrite the value for H in the first FOR statement...
What you want is either an IF-THEN-ELSE or a SWITCH/CASE construct like "IF (H>=0 AND H<6) THEN...". Right-click the formula node, select help, select formula node syntax !
And I'm even more convinced a standard LV case structure will be much more reasonable here: just wire H to the selector input...
Message Edited by GerdW on 10-29-2009 11:29 AM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Whou00B4s who node is missing

Similar Messages

Maybe you are looking for