Whr we do the business completion other than in IW32

Dear PM Gurus,
my client requirement is Accounts / Finance departments do the Settlement for TECO orders, after settlement clients requires Business completion should done by Accounts department. How i have to give this authorization i know CO99 which should used to Collective Closing of the orders. Is there any other t.code ? In IW32 we can give authorization but is there any choice to operate only Business completion action only? is it possible can we restrict for other activities? and one more thing i want to restrict to cancel the TECO and Business completion is it possible ? if possible in which way we can restrict this functionality? its mandatory for my business.
thanks in advance to all PM Experts
regards
jalu

hi
create one role with following values and assign to finance users.it will allow only to do completion.also check with your securiy team as well if anything missing.
Authorization object:I_VORG_ORD(PM: Business Operation for Orders)
Field name:BETRVORG
Field value-BABS(Complete)

Similar Messages

Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.

Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.
Actual accounts & contacts need to be route around 2000 & 3000 but we have observed lakhs of records routing into local DB.
We have verified all the Assignment Rules, Views.
We ran docking object visibility rules and we have observed that some other accounts are routing due to Organization rule passing. (these records are not supposed to route).
Version Siebel 7.7.2.12,
OS Solaris.

let me know what would be the reason that 1st million takes only 15 minuts and the time goes on increasing gradually with the increase of dataYes that's a little strange. I only can guess:
1. You are in archivelog mode and the Archiver is not able to archive the redo logs fast enough
2. You don't use Direct Load and DBWR ist not able to write the direty block to disk fast enough. You could create more DBWR processes in that case.
3. Make a snapshot of v$system_event:
create table begin as select * from v$system_event;After the import run
create table end as select * from v$system_event;Now compare the values:
select * from begin order by TIME_WAITED_MICRO descwith the values given you by
select * from end order by TIME_WAITED_MICRO descSo you can look where your DB spent so much time waiting for something.
Alternativly, you could start a 10046 trace on the loading session and use tkprof.
Dim

Is there any way to refresh the zfs snapshot other than creating another on

Hi,
I want to use the zfs send / recv replication, after I create the snapshot and do send/ recv to the remote filesystem, is there any way to do send and recv from the same snapshot after making some changes to the original filesystem other than creating another snapshot every time before send / recv
Thanking you
Ushas Symon

No, you'd have to take another snapshot and then send it, but you don't need to save all the snapshots after you are done. If you script it out to take snapshots fairly often during the day, the amount of data would be small. You can also send to a file and then backup that file to tape or whatever, you wouldn't have to save a million snapshots. You can also look into OpenSolaris' Time Slider function.

Print preview of the PO -languages other than English is not appearing.

Hi Experts
In the Print preview of the Purchase Order -languages other than English is not appearing.
When I create a PO for a chinese vendor , in the print i can see only the ##### characters.
Pl let me know how to solve this issue.
Note :
Vendor language is maintained as Chinese in vendor master & same is getting copied in the PO heaader communication tab.
With outtype LP01 it works for the print preview , however when sent as a PDF it wil be with #### charaters.
But when i select LOCL it gives #### charaters for both print & PDF.
Thanks
Dkmurthy

are the replacements if the character cannot be printed on the chosen device.
There are several OSS notes adressing this issue. Contact your basis team.

Can you add comments to the XML reports other than one Block Comment and one Test Comment?

I know how to use Block Comments and Test Comments but if I need to add more comments to my XML report in a test other than one Test comment, is there a way to do this? In other words, I would like to be able to add say 5 comment lines for a single test. Also, can a Test Comment or Block comment be more than one line in length? If so, how do you do that?

What version of TS do you have? If you have 4.1 or better (might be possible in 4.0 I can't remember) you can just use the additional results. So in the step properties you will see Additional Results. Then just add as many as you want.
Then you will see it show up in the report like you want. I couldn't get multiple lines to work in one comment. I tried \n but that didn't seem to be supported here.
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~
Attachments:
StepComments.JPG ‏38 KB

How do I remove the photo dates other than with Sport Removal?

How can I remove the photo dates that appear in yellow from a photo other than using the Spot Removal tool which has not worked?

While I agree that more detail is necessary from the original poster ... maybe even a screen capture
I don't know if this is what the original poster means, but when I have tried to use the Lightroom 5 Enhanced Spot Removal Tool for this purpose, I could never obtain a solution that seemed to remove the offending object and fill in the desired area with a relatively continuous and natural looking result. It always seemed clear to me, when I tried to do this, that the result always had un-natural looking discontinuities in the end result caused by my application of the Enhanced Sport Removal Tool.
And so, in my case, to eliminate the dates from the bottom of my photos, I wound up using different software ... in my case Photoshop Elements, which produced a more satisfactory result.
On the left is the version of the photo created by Photoshop Elements, the date is missing (and at the bottom right, a lamp to illuminate the sign is also missing); while on the right is the image with no attempt to remove the date and lamp. My attempts to reproduce the removal of this date via Lightroom were unsuccessful, the grass never looked natural, the grass always had discontinuities which made the result unsatisfactory, and I did not save the Lightroom attempts to remove the date and lamp. (And if you look carefully on the left, you can see places where the shadows abrupty have disappeared, an artifact of the process, however I still deemed the photo on the left to be successful at the removal of these items, as I don't usually focus on the shadows)

Running the batchinput session other than sm35

Hi
Can any one please tell how to know when a batch input session was run other than SM35?
Thanks,

Hi Anand,
Check for the following transactions:
SM36 - Define Background Job
SM37 - Simple job Selection
Hope this helps you,
Regards.
Chandra Sekhar

Solutions...anyone have any for the activation problems other than time cha

I am waiting now for 17 hours. Anyone have any solutions other than waiting and change the clock?

I have used all of the following on Maversicks, with no issues at all:
iPhoto
Aperture
Acorn
Graphic Converter
Intensify Pro
Snapheal
I've not seen any reports indicating any issues with other apps either. I would strongly echo Larry's comments about App Store reviews, and reviews on download sites and forums up and down the internet. The great thing about the internet is that everyone has an opinion, that might also be the worst thing.
The problems with these comments are manifold: for a start, happy people are less likely to review, unhappy happy are much more inclined to. That's why we don't have thousands and thousands of posts on this forum from all the people who have no problems saying "look I have no problems". Unhappy people get cross and are more likely to express that anger in negative reviews.
Then what about the reviewer? What is his or her knowledge, experience and skill level? No doubt they are having problems, and real ones, but how do you know if their issues are problems with the app, their own inexperience, third party conflicts and so on. I've seen people on here claim the fact that iPhoto won't edit video is a bug. I've seen hundreds and hundreds of posts from folks on here who are certain they've found a bug, only for their glitch to be resolved. No review is worth anything unless you know something of the reviewer, his or her knowledge and experience.
So frankly, I never bother with those reviews on any such stores, not just iPhoto on the Mac App Store.

How do i install the ring tones other than i-tune ?

how do i save the customized ring tones to i phone 5 without I turn using?

Use aa free app like RMaker or Ringtones and follow the video instructions

How do I add a before and after transition to a standalone clip in the second or other than primary stack?

New to FCPX on a project this weekend. I have gotten reasonably comfortable with the basic features but one thing that I CANNOT figure out, is how (what used to be) selecting a track in the timeline to activate it to apply a transition. I need to select a video clip which stands alone in the stack which is positioned above the primary track and add a blend transition before and after the clip. I have set the opacity to blend with the images in the primary track below but the beginning and end of the clip in the second stack do not fall at the transition points in the lower track which should not matter anyway. I can’t find it in Help or the third party tutorials that I purchased and completed. Thanks for your help!

Tom gave you the answer. As a follow-on you can then use the Cross Dissolve transition on your newly converted connected clip. This transition will allow it to dissolve smoothly into the video below it. Note that the Fade to Black transition will take both that clip and the video below it to black which would probably be undesirable. Use Cross Dissolve instead. Best wishes.
stephen

I got a new iPad last month and set up through iCloud. Still have a message on my screen that it is still restoring from iCloud. How do I get it to complete other than having to rest me start again?

I Got a new iPad last month and sent up in the usually way and syncd to iCloud. However it has ever since shown a comment saying:
Restoring from from I cloud backup
i I have no idea how to get it to complete. Or do I need to re-set and start again?
Help!

Where do you see this message? I know it can take a few hours to restore from an iCloud backup if you had lots of apps, data, movies, camera roll photos etc on it, but it should not take days and daus to finish.
Have you restarted or reset your iPad since you got it? Not the reset that you are talking about - I mean the system reset. Try either or both and see if the message goes away.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support

Generating database in the user schema other than the login user

I have to generate database into ESP schema.
But in my office the schema specific users don't have create privileges(ex: ESP user for ESP schema).
Cause, we usually have to work on more than one project at a time, so our DBA gives all the privileges to my own id(ex: navya) and only select privilege to schema specific users. So, when i have to generate a database, if i give ESP login details, i get error of insufficient privilege. And if i give my personal login the database is getting generated in my schema. All i am doing right now is generating ddl files and in those files adding schema name in front of the objects.
But, is there any better way to do it.
Thanks.
Navya.

Hai!
I belive it is not a license issue.
Please tell me the following things-
How can I mapped the period on the numbering series window ?
>> Their is a field in Numering window as Period Indiator (if, not enable using form settings)
this should be same as Period Indicator in Posting Period window of selected period
How can I set the default periodset for all users. where is the option to set it for all users?
>> First, click the Drop down box of Posting Period in Numbering Window
select the current period. Numbering window display only the Numbering series linked with current Period.
select any one Numbering series on those by cliking on it's row no.
Click to Set as Default Button in right coner of Numbering window.
Select second option For All Users
Now, try to open the Document for which you have done this settings.
Regards,
Thanga Raj.K
+91 9710445987

Is there a way to post an image to the Medical ID other than via the photo on my contact card, e.g. a QR Code?

Apple's Medical ID is handy because it can be shown in front of the lock screen. But it would be very helpful to allow the pasting of images like a QR code so other people looking at the Medical ID could scan that code and be directed to a website that might contain other information I would like to share. Any way to do this? The fields appear to accept text only. Is there some other way to do this with fonts?

I should have explained the use case:
Imagine a paramedic or emergency room clinician needing fast access to this information. Typing a URL is prone to error in this case, while scanning a QR code isn't, wouldn't you agree?

Is there a way to open the apple menu other than clicking on the apple

Are there alternative means to open the Apple Menu?

Press control + F2. If this doesn't work, press control + fn + F2. Then use the up and down arrow keys.

How do I keep from highlighting terms in the search bar when I modify a string in the search bar--other than by clicking three to five times?

I'm not talking about terms in the search results; I'm talking about terms in the search string in the search bar in the upper right corner. (Mine is set to use only Google.) When I've searched on a string and decide to modify the string for a second search (say, changing "Spanish architecture" to "Spanish architectural style"), clicking at the end of the search string first highlights the entire string and then, as I keep clicking, highlights various parts of the string. Sometimes it takes five clicks to get the highlighting to go away so I can start back-deleting normally instead of by entire word or phrase. The Google homepage doesn't do this, whereas all search engines in Firefox do it, so it's clearly a Firefox annoyance.

Left click ONCE to get it's attention. After a moment, then do your work.

Whr we do the business completion other than in IW32

Similar Messages

Maybe you are looking for