WHT Error while J1INCHLN ?
Hi All,
I am facing the following problem while executing the JJ1INCHLN/J1INMIS (CHALLLAN UPDATE)
Business place/Section Code SC01 in company code does not exist
Message no. 8I738
Please Guide me.
Regards,
Shashi kanth
Hi Gaurav Kumar,
The error belongs to the different naming of the section code and the business place, so i changed it and managed as you told.
Thank you for your solution. i have assigned points.
And after executing J1INCHLAN Payment document is posted, but see the following lines how its updated.
Clearing Doc Number 100000000
Challan No 000000000001
Challan Dt 21.07.2010
Section 194A
Total Basic TDS Remitted 0,00
Total Surcharge Remitted 0,00
Total ECess Remitted 0,00
Total Tax Remitted 0,00
As per the new regulations there is no surcharge & no education cess.
total will be on tds payable account.
please guide me.
regards,
shashi kanth.
Similar Messages
-
Error while J1INCHLN - Business Place for document could not be determined
Dear All Experts,
I am getting below error while running J1INCHLN Business Place for document could not be determined. For updating Business Place & Section Code I am running J1INPP Update Business Place information in FI document.
So I am getting error Document is incomplete.
Further I decided to update this in BSEG manually from SE16N. I am getting two errors :
1 ) Entry XX does not exist in T059Q ( Check Entry)
2 ) Entry C1 does not exist in T059Q ( Check Entry)
I have posted TDS to with these Tax Codes and same maintained in Vendor Master as well. But I am not getting these entries IN T059Q.
I got way to maintain via View Maintainence. But I would like to know the significance of these details.
Experts guidance will be helpful.
Regards,
Revati Joshi.Dear Expert,
You might have not maintained a number range intervals for Remittance Challan for current year,
Step-1:
It is in Path: F.A(New) -- F.A.G.S(New) -- Withholding Tax --- Extended Withholding Tax --- Posting --- India --- Remittance Challans --- Maintain Number Groups -- Provide your company code, Section Code, Official W/H Tax Key and Number Group - 001
Step-2:
It is in Path: F.A(New) -- F.A.G.S(New) -- Withholding Tax --- Extended Withholding Tax --- Posting --- India --- Remittance Challans --- Assign Number Ranges to Number Groups --- Provide Number Group - 001 and Internal Number Range - 01
Step-3:
It is in Path: F.A(New) -- F.A.G.S(New) -- Withholding Tax --- Extended Withholding Tax --- Posting --- India --- Remittance Challans ---Maintain Number Ranges --- Select Maintain Groups button and select the 001 Check box and menu -- interval -- maintain and provide company code, and then select insert interval button and provide Calendar Year and Intervals
after configuring this steps, try posting the documents by entering business place and section code in the accounting document and Create Remittance Challan in T-Code: J1INCHLC - Create Remittance Challan and next for Bank Challan T-Code: J1INBANK - Enter Bank Challan and next for printing Withholding Tax Certificate T-Code: J1INCCERT - Print
Try this steps.. it will met your requirement..
Regards,
GOPI KRISHNA YANDRA
SAP FI/CO CONSULTANT -
Error while updating vendor challan J1INCHLN
Dear Guru,
my client want to use Extended withholidng Tax . i v configured totaly according to indian TDS configuration. i m getting error while updating the vendor challan.
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.
Business Place and section code updating properly line itme table.....
Thanks & Advance
Laxmi NarayanHi,
Also check the following:
Sometimes, user will delete the automatic line items generated related to TDS and they will enter manually. You can find the same as below:
goto vendor line item in the given document and click on withholding tax icon (near to more data), if u didn't find any thing in this place means, user entered the same mannually, if you found some information in that tax box, then problem not with user.
If u didn't found any thing in that tax tab, then system won't generate any accounting entry and will issue an error message like what u getting. In that movement, while updating j1inchln ignore the wrong documents and continue with correct documents.
You can suggest them, they should reverse the entries which is causing problem, there was no solution from sap side(as this is a mistake from user side)
Earlier i also faced the same problem, identified users deleted the automatic line items and enter the tds line items mannually
Hope it can help u to resolve this issue
all the best
prasad -
Error while creating datasource
I am getting this error while creating the datasource on console of html page.
java.lang.NullPointerException
at weblogic.management.console.utils.MBeans.getMBeanClassNameFor(MBeans.java:1153)
at weblogic.management.console.actions.mbean.EditMBeanAction.getMBeanClass(EditMBeanAction.java:210)
at weblogic.management.console.actions.mbean.EditMBeanAction.getDialogTypeKey(EditMBeanAction.java:188)
at weblogic.management.console.actions.internal.InternalActionContext.setAction(InternalActionContext.java:158)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:170)
at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:242)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5360)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:721)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3043)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2468)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)well thankx for the inputs. well but te screen dosent move from tht point. as we enter a datasource name, it gives this error. and we havent logged into anywhr to give the access credentials.
am wondering how then whts the point in knowing the username and pwd if i give edit datasource .
thankx -
Error while executing the report to display on the web in BI 7.0?
Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance. -
Error while connecting to the database from a JSP Page
Hi,
I am using a simple JSP page which is based on the sample JSP pages from OTN.
When I try to connect to my database using the following code:
InitialContext ic = new InitialContext();
OracleDataSource ds = (OracleDataSource)ic.lookup("jdbc/OTN9iDS");
m_connection = ds.getConnection();
I get the following error:
Naming exception Error while connecting to the database : javax.naming.NameNotFoundException: jdbc/OTN9iDS not found in JDBCTest-JDBCTestProject-webapp
Does anybody know wht this is happening?
Any help would be appreciated
FRankHi Frank,
Are you using standalone OC4J or 9iAS ? If you are using standalone OC4J then you need to add a proper data source entry in %OC4J_HOME%j2ee\home\config\data-sources.xml file.
If you are using 9iAS the you can log in to the Enterprise Manager console and add the data source entry by using wizard provided by 9iAS.
Ensure the case of the JNDI lookup string, since, it is case sensitive.
Hope this helps.
Abhijeet -
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
I activated all 0* objects in BTMP and checked that they are all activated, but I found errors when opening the BEx Web Analyzer
Error messages :
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
ERROR: Command type SWITCH_AXES of object not recognized
ERROR: Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
So I ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version D report to check and choose validate.
Error messages :
Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.
Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.
Width of object item:GROUP_ITEM:GROUP_ITEM_1 is very small (1amp;1)
Query does not exist in the BI System (Object QU )
Cannot instantiate data provider
I also ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version A and got the following errors:
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
Parameter GENERAL_TEXT_ELEMENT of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Parameter GENERIC_TEXT_BINDING of object item:GROUP_ITEM:GROUP_ITEM_1 cannot be higher-level node of GENERAL_TEXT_ELEMENT
Item item:GROUP_ITEM:GROUP_ITEM_1 of type DROPDOWN_ITEM cannot be a parent node of DATA_PROVIDER_REF
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_POSITION
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_ONLY
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
What could be the problem?hi,
Please look into this note let me it helps...url=https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=917950&_NLANG=E]Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web[/url]
check this link as well for [<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">Bex Web Configuration</a>
wht is the SP Level?
Nagesh Ganisetti. -
Error while doing Challan updation
Dear all,
Iam getting error while doing Challan updation, system shows an error saying "No line Item exist for Challan updation" whereas iam having all the data but the system is not picking.
pls help on this
will get a good points for solving thisI understood ur problem, u r running the J1INCHLN when u r running this program . Program chks both the Table BSEG & WITH_ITEM they 2 field from BSEG-BUZEI & WITH_ITEM -J_1IBUZEI . if this 2 line item is not matching then system will show the same error which u have mentioned.
Whether this has occured first time or rarely it occurs, if first then just update the table WITH_ITEM for the field J_1IBUZEI with respect to BSEG-BUZEI for the TDS line item only. Make the changes with help of ur Internal consultant. write an update program. -
Error while doing outbound delivery against Purchase Order
hello
i m getting error while doing Outbound delivery for purchase order as follows
EKPO-SOBKZ=E; EKPO-UMSOK=_; EKPO-KZBWS<>_ EKPO-KZVBR<>E (Note 305582) not supported (check your entry)
Message no. M7146, i m not getting wht will be the reason,
Regards
NISHJPlease go through the note - 305582. It is clearly given the direction.
Symptom
You try to post a goods movement for a stock transport order from the unrestricted-use stock into the sales order stock or project stock.
During the goods issue, the system displays error message M7146 with a text along the lines of "EKPO-SOBKZ=E; EKPO-KZVBR<>E; ... not supported".
Cause and prerequisites
In the goods issue for the stock transport order, the system may have to create a stock in transit which is deconstructed during the goods receipt. If the withdrawal takes place from the special stock, it is clear which is the receiving stock.
However, if the withdrawal is carried out from the unrestricted-use stock ("Collective requirements", controlled by the dependent requirements indicator MARC-SBDKZ in the material master of the issuing plant), this results in the design problem that the control tables of the goods movement do not have any key field for the receiving stock. Therefore, the control for the receiving stock is controlled via the consumption indicator in the account assignment category of the purchase order. The consumption indicator therefore requires a specific default setting (you may have assumed you could change the design of these control tables, however this is not possible).
Using an inappropriate consumption indicator then causes for the goods issue an incorrect or no stock in transit to be created so that the goods receipt fails.
Solution
Implement the program change in accordance with the correction instructions.
Afterwards implement Note 413908 immediately if this is relevant for your release. -
Error While Releasing Accounting Document & Proforma Invoice--URGENT
Dear Gurus,
I am facing problem in below cases.
-- Proforma Invoice canot be cancelled ....If i need to cancel then wht needs to do
-- I created New Material Master again old material and made sale getting Acc determinatin error while releasing accouting document.. But in old cases( old material) no problem like this. Y like this.
Pls guide me.
Regards,
VenkatDear All,
Thanx your kind replies. I analysis and foud following:
Access Message Description
05 123 Access ZKOF not carried out
Access Complete
Field Condition Table Value in Doc
Chart of Accts CAIN
Sale Org 1000
Plant F201
AccAssg Grp 01
Acct Assgn. Grp 05
Account Key !! ( Showing Yellow Indicator)
Above things showing Against Condition TYpe JEXT.
I checked in Pricing procedure and condition Type JEXT....against this no Accounting key assigned.
No problem faced earlier...now showing like this........y.
Regards,
Venkat -
Error while execution of BPEL processes in IPM Solution
Hi All,
I am working on the IPM Imaging solution in which Invoice data is captured from OFR in XML format , pushed into IPM and then BPEL process is invoked to push the data into apps tables.
I am facing following error while invoking a procedure which is in apps schema from BPEL by giving it parameters.
actually this procedure/function will accept the payloads as parameters and will give some output parameters, but while processing i am getting following error :
Non Recoverable System Fault :
Exception occurred when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'PreImportCleanup' failed due to: Parse struct conversion error. An error occurred while parsing XML representing a Java struct. Unable to convert the XSD element P_INVOICE_REC whose user defined
type is AXF.AXF_PREIMPORT_CUSTOM_PKG_R_IN to a Java struct.
Cause: java.sql.SQLSyntaxErrorException: ORA-04044: procedure, function, package, or type is not allowed here ".
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
Any suggestion to get over this issue will be so helpful !
Thanks & Regards,
NupurHi Nupur,
We had requirement for automating invoice processing, came to know we need to use ODC/ODDC,OFR,OIPM 11g and SOA 11g with EBS.
My questions are:
1. do we need OFR for this.
2. if so how to configure OFR with OIPM
3. do we need to use imaging solution in OIPM for invoice processing and not managed attaachements
4. whts the flow is it frm EBS to OIPM or OIPM to EBS(populate invoice) or viceversa
5. can we do invoice processing automated without AXF solution.
Thanks a lot in Advance,
Ra. -
Error while loading data from DS into cube
Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
RohitHi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja -
WHT Error - Business Place for document could not be determined
Hi Gurus,
I am getting error while creating remitance challan " Message no. 8I707 - Business Place for document could not be determined "I have check all the configuration related to business place, section code and remittance challan number range and it seems ok.
would request you to help me to workout this issue.
Regards,
Rahane DHi,
Please refer to this SAP note to find out the exact error in J1INCHLN
SAP Note 1465529 - CONSULTING NOTE FOR J1INCHLN
In addition to this please refer to the following link in case you find out that the posted documents have missing Business place updated..
Re: Subsequent implentation of EWT (Challan and Certificate)
Regards,
SAPFICO -
Error while calling a select esb service
javax.resource.ResourceException: RollbackException: Transaction has been marked for rollback:
I encounter the above error while executing a synchronous bpel process, that invokes an esb db select service to fetch a value from the db.
the details available for the error are:
An unhandled exception has been thrown in the ESB system. The exception reported is: "java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 0 at java.util.Vector.get(Vector.java:710) at oracle.tip.esb.server.common.wsif.WSIFInvoker.readResponseHeader(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source) at oracle.tip.esb.wsif.WSIFOperation_ESB.executeRequestResponseOperation(Unknown Source) at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:431) at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:353) at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:192) at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:733) at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:368) at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:197) at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3266) at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1696) at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:184) at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:269) at com.collaxa.cube.engine.CubeE
Please suggest
thanx
AJDone That,
Thanx a ton Dave, it worked.
So I am finally moving on :-)
Just one question Dave, I happened to work on the Beta release of this version too, the problem was not there. How come we have been able to get it in dev preview. -
Error while running a Java Program
Can anyone help me,
I am getting the following error while running a Java program, Below is the exception thrown, please help.
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RESummer1.run(RESummer1.java:505)
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RECollectCont.run(RECollectCont.java:304)Ok, let's see. Write the following class:
public class Grunt {
public static void main(String[] args) {
System.out.println("Hello Mars");
}Save it as "C:\Grunt.java", compile by typing:
javac c:\Grunt.javaRun by typing:
java -classpath "C:\" GruntDoes it say "Hello Mars"? If yes, go back to your program and compare for differences (maybe you used the "package" statement?).
Regards
Maybe you are looking for
-
Email and SMS from 2004 B Indian version
Hello All, Can we use the EMail and SMS alert in 2004 B Indian Version. It is possible in 2005 A version(US). If you start SBO Mailer in the server tools the alerts will automatically send. Can any one help me to find it. Thanks & Regards, Jayakumar
-
I am trying to turn my Sony 8mm Handicam video into DVD through my MACBOOK PRO. Unfortunately my DVD function no longer works. Apple won't repair, no longer carries the parts. Referred to Apple repair shop. Gentleman there said it cost the same t
-
My iPhone turns off whenever it goes into standby mode and has to be turned back on to work
My iPhone turns off whenever it goes into standby mode and has to be turned back on to work
-
How to modify below simple chat system?Please help!
Dear, I have a ChatServer.java files as below. It is a round robin chating system. There are two client chatting. Now I want to modify below file that allow the discussion to keep going until one of the user input is "BYE" in uppercase without any pr
-
Web Service implementation and consumer in different version
Currently we have a Web Service which is written in J2EE 5 and this web service are consumed by Web Application written in 1.4 We are using SOAP for connection and JAXB API for parsing. We could like to know if there is any issue which could arise be