Wht is performance Management and it t-code in SAP Hr

Hi expart ,
can u tell me wht is performance Management and it t-code in SAP Hr
Regards
razz

Hi,
performance mangt is an upcomming part of HCM which involes the process reagarding employee performance calculations in term of final appraisals on certain periods. This allow both the employee and the managers to fill the appraisla documents/templates..
T-code are : APPCREATE and PHAP-*
Regards
lakhan

Similar Messages

Performance Manager and Data Gatherer

Hello,
I am looking for some basic info (I think). I have been using the EM Console - standalone for some time now but would like to use the diagnostic pack and Performance Manager. Can this be used in a standalone configuration or do I need to buy Enterprise Manager? If it works in a standalone configuration and I do not need to buy it, could you point me in the direction of documentation on how to start the data gatherer on my 9i database on AIX 5?
Thanks,
Jeff Graham

Post Author: Ferhat
CA Forum: Performance Management and Dashboards
you have to find the keyword to see...
i suggest you to uninstall businessobjects and install again(else it's very hard to add the performance management program).
while you install, check the install performance management also(you have to have the keyword).

Can i use "Oracle Database 12c: Performance Management and Tuning " training for getting certification on "Oracle Database 11g: Performance Tuning 1Z0-054"

i have taken "Oracle Database 12c: Performance Management and Tuning new" training from oracle university. Now i would like to get certified on "Oracle Database 11g: Performance Tuning 1Z0-054" exam. Is it possible ?

I essentially endorse and refer you to Matthews' and John's post above.
I would differ with slightly with Matthew because my guess is you would often be able to use like for like 12c training for an 11g certification ( I believe there are precedents). BEFORE ANYONE ASKS THE OTHER WAY DOESN'T HAPPEN.
.... but totally concur with Matthew you would ill advised to procede on that basis without one of:
- This being advertised as possible on the website : e.g. https://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=654&get_params=p_id:169 ... option 2 show courses.
- Confirmation from Brandye
- Confirmation from an Oracle Certification Support Web Ticket ( http://education.oracle.com/pls/eval-eddap-dcd/OU_SUPPORT_OCP.home?p_source=OCP )
... The more common (and in my opinion usually better) way would be get your 11g DBA OCP ( or higher first) and then take the 1z0-054. I am almost certain they will accept your 12c course for the 11g DBA OCP.
If you are choosing the route of not being a 11g (or 12c ) DBA OCP first but are on option 2 and relying on the course for certification then the issue is more in the balance and you are even more strongly advised to get confirmation before proceding (remember if the rules need to be changed for you only then any profit out of the exam is lost).
In general my understanding is Oracle would prefer to encourage people to train on the latest version of product that is available for training and will prefer to avoid restrictions which would cause you to train at a lower version. ( This is simply my guess at Oracle University Policy ... personal opinion only).
Having said all I have said I'd encourage you to go with the advice of the earlier two posts.

Performance Manager and Dashboard Manager not showing

Post Author: Darkling
CA Forum: Performance Management and Dashboards
A am unable to get the performance manager and the dashboard manager to show in the CCM or in the CMC. All else works fine.

Post Author: Ferhat
CA Forum: Performance Management and Dashboards
you have to find the keyword to see...
i suggest you to uninstall businessobjects and install again(else it's very hard to add the performance management program).
while you install, check the install performance management also(you have to have the keyword).

Difference between Performance Manager and XCelsius

Can anybody outline the differences/provide a document which would help me understand the differences between the working of Performance Manager and XCelsius?
Can Performance Manager be substituted with XCelsius and can XCelsius be integrated with Performance Manager?
Thanks,
Karthik Mohan

I think your problem may be able to be solved by Dashboard Builder. It can embed the Xcelsius

IViews available in Performance Management and Personnel Development

Hello Experts,
With Ehancement Package 4, what are the iViews available for Performance Management and Personnel Development (MSS and ESS) ?
Thanks!
Sivani

Nicholas,
I'm sorry but I was not clear with my question ... Is there any specific iVews for Individual Development ?
Thanks in advance!
Sivani
Edited by: Sivani L on Mar 16, 2011 6:27 PM

UCS Performance Manager and NetApp c-mode filers

We started an evaluation of the UCS Performance Manager. I can't add to the UCS Performance Manager Infrastructure any NetApp c-mode filers. Does anyone have the same problem?

Hi John, From the output you shared it looks like you using Performance Advisor and want to share a graph of a 7-mode system. The instructions link you shared is from Performance Manager which is for Clustered Data ONTAP only. In the Performance Advisor there is unfortunately no way to share a link. You can 'save as' to png as you probably already saw, or you can use the dfm CLI to generate the same and email, perhaps as a daily report. There is also a data collector that will post to the NetApp ToolChest that submits data to Graphite with dashboards in Grafana. This solution would allow sharing of a URL like you desire. If you want more info on this let me know. Kind Regards,Chris MaddenStorage Architect, NetApp

Difference between ARIS Process Performance Manager and SAP BI

Hi All,
I am searching for an answer on the following question: when the business purpose is to measure performance of E.g. a call center process. Can the Process Performance Manager from ARIS replace SAP BI.
Regards,
Marcel

Hi Marcel,
If I can add to the comment of Ajay,
I think that when your goal is to measure the performance of a Process and analyze root cause of performance problems, Process Performance Manager is best suited.
Even if SAP BI could do it as well, I think that SAP BI is best suited for data analysis like financial reports, Market studies ...
I think that the baseline is that SAP BI is a broader BI solution but ARIS PPM is best suited for process performance than SAP BI.

Performance Management - use offline layout on the SAP portal

Hello HR Performance Management experts,
I'm using a ECC6.0 portal, enhancement package version is 2.0.
How can I make the appraisal document appears on the Portal looks like the WORD document?
I'm thinking of using the Adobe form as the UI, which means I need to use the offline layout. ( with the BADI : HRHAP00_OFFLINE01)
But, I don't know whether this can work. And in that adobe form, can I have the funcion of "create" and "delete" objectives, or integrate with the Training management?
Can some one help to give some advices on this?
Thanks and Regards,

Hi Denish:
Following link may not apply to your scenario but could give you some direction and ideas:
Changing the Default Browser Detection - Developing Web Dynpro ABAP Applications - SAP Library
Further more, specifics of your system set up may help us in understanding your situation better and perhaps we can offer more help.
Sincerely,
Amrit

Upload and compare commodity codes in SAP

Hi Gurus,
Can anyone guide me on how transactions VEU4 and VE14 are used?
Are there any pdfs or tutorials available?
Thanks,

Hi,
please use this link
http://help.sap.com/saphelp_gts71/helpdata/en/04/b95d3f7d77a800e10000000a114084/content.htm
it may be usefull for u.
Loading Commodity Codes and Import Code Numbers
Use
This procedure describes how to load an external file containing commodity codes or import code
numbers for use in your system.
Prerequisites
u2022 The external file must be in ASCII format
u2022 You need to know the structure of the file u2013 which columns (positions) the codes, the text
descriptions and the units of measure occupy.
Procedure
1. You access this function from the Foreign Trade Data Service Cockpit.
2. Choose the appropriate tab u2013 European Union, Japan or Other u2013 in the Load/Compare
section of the Data Service Cockpit. Choose the Load commodity code button next to the
Commodity code field to display the selection criteria screen.
3. Enter the selection criteria and the file specifications.
Entries in the following fields are mandatory:
u2013 Country key
u2013 File name
u2013 Drive
u2013 Subdirectory
u2013 Initial position goods number
u2013 Final position goods number
u2013 Initial position goods text
u2013 Final position goods text
See the field help (F1) for detailed information about each of the fields in this procedure.
You can determine the actual positions of the columns for the data record structure
entries by opening the ASCII file and counting the spaces used for the digits and the
text characters. For this you need to identify the beginning and end positions of the
codes, their texts and units of measure (when applicable) and enter them in the
corresponding fields.
For example, for a commodity code file with the contents "12345678 Sample text"
(with no unit of measure), you should make the following entries in the data record
structure section:
Data Record Structure
Field
Entry
Initial pos. goods no.
1
Final pos. goods no.
8
Initial pos. goods text
10
Final pos. goods text
21
If there is no unit of measure (optional entry), the last position for the goods text can be a
number that is much greater than the actual final position for the goods text (for example,
200).
4. If you want to use this set of codes as the basis for maintaining the codes in the system,
select Carry out preparations and enter an identification code in the Key for upload field. You
will need this key to access this set of codes during maintenance.
5. If you are installing codes from floppy disks or several files
u2013 For the first disk or file, select First data carrier
<![if !supportLists]>u2013 <![endif]>For additional disks or files, select Further data carriers
6. Execute the function.
Results
The system uploads the file contents to the SAP System.
Potential Errors
When you execute this report, the system issues an error message if
u2022 The values for the beginning and end positions overlap
u2022 You enter an incorrect length for a commodity code or import code
number
u2022 The length for the codes has not been maintained for the country you
enter on the selection screen.
You assign commodity code and import code lengths for each country in
Table T609S in Customizing (see Sales u2192 Foreign Trade/Customs u2192
Basic Data for Foreign Trade u2192 Length of commodity Codes/Import
Code Numbers).
Bset regards,
venkataswamy.y

What is Corporate Performance Management

Hi all
I m a sap PLM consultant.
Can you please explain what is Corporate Performance Management and what we do in sap for this module?
Thanks
shashank agavekar

Hello
Corporate performance management (CPM) is the area of business intelligence involved
with monitoring and managing an organization's performance, according to key performance indicators
(KPIs) such as revenue, return on investment (ROI), overhead, and operational costs.
For online businesses, CPM includes additional factors such as page views, server load,
network traffic and transactions per second. CPM is also known as business performance management (BPM)
or enterprise performance management (EPM) .
Further info :
https://www.sdn.sap.com/irj/sdn/cpm-elearning
Regards,
Jean

XI3.0 and Performance Managment

All,
I have downloaded and installed XI3.0 in a local virtual machine using the Performance Manager BOE Premium Bundle license key from ESD. It all installs fine but I get no EPM demo dashboards (Total Electronics).
I do however have in C:\Program Files\Business Objects\Performance Management 12.0 various folders including one called demos. In XIr2, there used to be a BIAR file to import the demos but I cannot see the same in XI3.0.
All I can find are XML files in a demos>>dashboard folder, XML files in demos>>dataconnections folder and the usual 7 universes in the demos>>universes folder.
Anyone know how I get this demo content installed ?
Andrew

There is no demo actually.
Performance manager and Dashboard analytics are both wdeployed into the tomcat webapp folder.
You can try some in the performance manager through infoview and need the license for the analytics catalog in infoview

XI3.0 and Performance Manager

Post Author: andrew.r.fox
CA Forum: Deployment
All,
I have downloaded and installed XI3.0 using the Performance Manager BOE Premium Bundle license key from ESD. It all installs fine but I get no EPM demo dashboards (Total Electronics).
I do however have in C:\Program Files\Business Objects\Performance Management 12.0 various folders including one called demos. In XIr2, there used to be a BIAR file to import the demos but I cannot see the same in XI3.0.
All I can find are XML files in a demos>>dashboard folder, XML files in demos>>dataconnections folder and the usual 7 universes in the demos>>universes folder.
How can I get this demo content installed ?
Andrew

There is no demo actually.
Performance manager and Dashboard analytics are both wdeployed into the tomcat webapp folder.
You can try some in the performance manager through infoview and need the license for the analytics catalog in infoview

Dashboard Manager and Performance Manager

Please share your experiances on this topic. Dashboarding and Performance Management.

Post Author: Ferhat
CA Forum: Performance Management and Dashboards
you have to find the keyword to see...
i suggest you to uninstall businessobjects and install again(else it's very hard to add the performance management program).
while you install, check the install performance management also(you have to have the keyword).

Oracle Performance Management doubts

Hi All,
I have some questions related to Oracle performance management and hope they will get answered over here:-
Que1. The weight of all objective should be 100 but in my case it is allowing any value. What I need to do to restrict it?
Que2. Can we do objective setting and Appraisal process simultaneously? That would be allocate objective and rating in parallel?
Que3. When and how the rating provided by manager would reflect in the Performance (People --> Assignment --> other --> Performance) widow and what would be the effective date. I have completed all setup and process but the final rating is still not available.
Que4. What is difference between Talent management, Performance management and Workforce performance Management?
Que5. When I include the Appraisal in the PMP and select the Appraisal template (that just has final rating) and click on the "Go to Task" against "Manage appraisals" (to initiate it) I do not see anything. Do we/manager need to create plan every time using the link Appraisal.
Sorry for asking too many questions.
Thanks,
Avinash

Que1. The weight of all objective should be 100 but in my case it is allowing any value. What I need to do to restrict it?
ANS : This is a seeded one. If you want to restrict it you have to customize the page.
Que2. Can we do objective setting and Appraisal process simultaneously? That would be allocate objective and rating in parallel?
ANS : There is a checkbox "Allow Objective Setting outside of the period" (something like that).
Que4. What is difference between Talent management, Performance management and Workforce performance Management?
ANS: AFAIK, Oracle Talent Management and Oracle Performance Management are same. Prior to Oracle Performance Management, the module name was Oracle Talent Management.
Que5. When I include the Appraisal in the PMP and select the Appraisal template (that just has final rating) and click on the "Go to Task" against "Manage appraisals" (to initiate it) I do not see anything. Do we/manager need to create plan every time using the link Appraisal.
ANS : You can schedule the concurrent program, "Mass Appraisal Creation".
Hope it helps!.
MAK

Wht is performance Management and it t-code in SAP Hr

Similar Messages

Maybe you are looking for