Wht r post installation steps of BW 3.5 & how to check it installed correct

Hi,
Have installed BW 3.5
At end of installation is ask me abt SLD
Im not selecting SLD
send me BW 3.5 Post installation guide and how to configure with R/3 4.7 Server or ECC 5.0 or ECC 6.0
I don't need SAP offical guide, I need word document with step by step picture.
how to check it installed correct
mail me <email address removed by moderator>
Edited by: deepak kajale on Dec 3, 2008 2:25 AM
Edited by: Siegfried Szameitat on Dec 3, 2008 8:36 AM

>
Markus Taxacher wrote:
>Is the only possible way to migrate the BW 3.5 to ERP/ECC 6.0?
> Whats the easiest way for upgrading to 6.0?
>
> Best regards,
> Markus
Hi, you cannot use BW3.5 you must have BI7 (not ECC6!) to install BCS 6 - BCS sits on BI (formerly known as BW).
It doesn't matter what version of source system you have, you can still collect data from ERP 4.6, you don't necessarily need ECC6.

Similar Messages

Need Installation & Post Installation Steps of EP 7.0

Hi,
      I am having EP6.0 with me and I am planning to install in my system. Any one can give the INSTALLATION and POST INSTALLATION steps it will be help full for me to install.
      I am having EP 6.0 windows version with me.
Regards,
Sateesh J

Hi Pandu,
    I will give u the path just check it.
Goto service market place>Downloads>Installation & Upgrades>Installation & Upgrade Guides>SAP Enterprise Portal>select the portal release(ex 6.0 sp3 and heigher)which is in the left hand side menu>SAP Netweaver>SAP Netweaver 7.0>SAP Netweaver7.0(2004s)-->Installation.
There u could find all the documents u need.
Regards,
Tilak.

Error in the post installation steps of SLD .

Hi
We are working on EP7.0 2004s.We are using local sld.Right now I am doing the post installation steps for SLD.I added the J2EE and UME roles.In the next step I went into the administration tab of SLD for configuring.It is throwing this error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
This is detailed exception I got.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:516)
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:462)
at com.sap.sld.wd.main.wdp.InternalMainInterfaceView.wdFirePlugToOldUI(InternalMainInterfaceView.java:154)
at com.sap.sld.wd.main.Head.onActionAdministration(Head.java:277)
at com.sap.sld.wd.main.wdp.InternalHead.wdInvokeEventHandler(InternalHead.java:227)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please help me.
Thanx & Regards,
Naresh

Hi Naresh,
Can you let me know the service pack for the portal.
Also try login in using administrator using the http://<localhost><port>/sld
thanks
Pankaj

Post installation steps for SAP PI, scenarios for SAP ERP 6.0 EhP 3.0 BAIO

Hi!
I installed SAP NetWeaver 2004S with PI component.
I also have a demo SAP ERP 6.0 EhP 3.0 BAIO system with several clients:
(100: demo client, 200: BW, 300: demo client (copy of 100)).
Questions:
what are the post installation steps to configure SAP PI?
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
Thank you very much indeed!
regards
Holger

Hi Holger:
what are the post installation steps to configure SAP PI?
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
I recommend you to use proxys in your landscape as you want to interchange messages between
different clients in the same system.
Hope this helps you.
Carlos

Webdynpro error in Post installation steps of SLD

Hi
We are working on EP7.0 2004s.We are using local sld.Right now I am doing the post installation steps for SLD.I added the J2EE and UME roles.In the next step I went into the administration tab of SLD for configuring.It is throwing this error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
This is detailed exception I got.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:516)
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:462)
at com.sap.sld.wd.main.wdp.InternalMainInterfaceView.wdFirePlugToOldUI(InternalMainInterfaceView.java:154)
at com.sap.sld.wd.main.Head.onActionAdministration(Head.java:277)
at com.sap.sld.wd.main.wdp.InternalHead.wdInvokeEventHandler(InternalHead.java:227)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please help me.
Thanx & Regards,
Naresh

Hey Aviad,
Yes I did, in my case I've installed PDK SP 9 over SP2 which is prohibited. If this is your case as well do the following:
1) From the Undeployment tab of the SDM select the com.sap.pct.pdk..
components.
2) Using the Archive remover tool which can be accessed from
System Administration > Support > Portal Runtime > Administration
Console > Archive Remover --> Remove the portal applications with prefixcom.sap.pct.pdk...
3) Navigate to Content Administration > Portal content > Content
Provided by SAP > Platform Add-Ons > Developer Content
and remove all the contents below this folder.
4) Restart the server
After this you can deploy the SP9 business package using the SDM.
Hope it helps,
Roy

POST Installation steps for SAP XI 7.0 SP06

Hi Experts ,
We are trying to install XI 7.0 SP06.We are suppose to carry out post installation
steps but we are not able to locate a proper post installation guide for the same.
We have succesfully installed XI 3.0 earlier .However XI 7.0 post installation steps in the guide that we have "SAP NetWeaver 2004s SR1 ABAP+Java on Windows: Oracle" , are relatively less...
Nevertheless, we have carried out the following steps
5.21.1 Performing PI-Specific Steps for SLD Configuration
Local and Central System Landscape Directory (SLD)
Mapping Security Role to User
1. Log on to the Visual Administrator of the J2EE engine of the SLD host.
2. Choose Cluster® Server® Services® Security Provider.
3. In the Runtime tab, choose Policy Configurations and then the column Components, and select the component
sap.com/com.sap.lcr*sld.
4. Switch to the Security Roles tab to display the assigned roles.
5. Select role LcrInstanceWriterLD.
The user SLDAPIUSER already exists with its security role LcrInstanceWriterLD.
6. Switch to edit mode and add user PIAPPLUSER with the same role LcrInstanceWriterLD.
Note
For a central SLD, the user PIAPPLUSER must be created in the central SLD ABAP system first and be
assigned to ABAP role SAP_XI_APPL_SERV_USER. The password must be same as in the XI Exchange
Profile on the XI Integration Server.
Note
For information on the UME actions, see the Post-Installation Guide - SLD of SAP NetWeaver 2004s, section
Configuring SLD Security, at service.sap.com/sld® Media Library.
Maintaining SLD Connection Parameters (ABAP API)
1. Log on to the SAP XI Integration Server System as user DDIC and call transaction SLDAPICUST. The screen
Maintain SLD Access Data is displayed.
2. Choose Display <-> Change and proceed as follows:
a) Replace the existing SLDAPIUSER with PIAPPLUSER user.
Note
For a central SLD, make sure you use the user with security role LcrInstanceWriterLD.
b) Make sure your entry is marked as Primary.
Note
Only the entry marked as Primary is active.
c) Save your settings.
April 10, 2006 PUBLIC 97
Now we don't know wether the sld configuration is over or not ...or for that matter in RWB we see only J2se based adapter engine and not J2ee based adapter engine...
Kindly help

Hi..
Instaed doing this,please try out template based configuration which has been mentioned in the installation guide or else do as follows
1.Login into NWA (netweaver administrator)
as
http://<host.<domain>.<com>:<port>/nwa
2.Use J2ee_admin user id and password
3.go to deploy and change
4.select template based configuration for PI
5.execute the template
6.install it
you can find the list of other templates which are clear and easy to do the post installation step..i found it useful ..
Apart from these, as per sandro, you can check the data transfer in visual administrator or go the abap engine, transaction RZ70, press accept proposal button
then execute button , check the data supply without any error
Thanks
Gopal
(Avoid points if useful)

Post installation Steps for SAP XI

Hi,
I am doing post installation steps for SAP_XI, for the step "Generating roles for SAP_XI and SAP_SLD in transaction PFCG, when I enter Role: "SAP_XI*" then its not generating any roles it is giving message "No roles found in the selected area" Please suggest
Thanks,
Nishant

Create user in SAP XI and then assign them role
Create user using SU01 transaction. Enter the username and click on the first button (create).
Follow the process below
1. Address Tab
Enter the user details
2. Logon Data Tab
Enter the initial password. Make sure user type is Dialog (it is by default).
3. Roles Tab
SAP_XI_DEVELOPER
SAP_SLD_DEVELOPER
SAP_XI_MONITOR
(if the user is admin give the admin roles)
Before logging on to the Integration Builder, logon to ABAP stack (SAPGUI frontend on windows or java) at least once. Then logon to Int.Builder components.
regards
Dharamveer

NW PI Post Installation steps

Hello All,
I have installed a dual stack PI system and performing post installation steps for PI AS Java. In configuration tasks After completing NetWeaver initial setup with skipped steps I was progressing to next step to configure NW PI - AS ABAP in All Configuration Tasks-->NW PI - AS ABAP (Basic Configuration for Idoc, Proxy Maintain) but I couldn't find this option.
I have updated system, patches, cim etc still I couldnt find the above option, Please advise where I went wrong.
Thanks
Sam

Hi,
What is the pi version?
The steps differs from version to version . Like 7.1 and 7.3 are not exactly same. Can you check in the installation guide for the pi specific post steps for your version .
Regards,
Amit.

XI Post installation steps

Hi,
I'm trying to get XI going at a project. The basis guys have installed the server but I have an idea none of the 'post installation steps' have been completed.
The symptoms are that when I start the Integration Builder (SXMB_IFR) the Windows 'File Explorer' is started and not IE. The Integration Web page is not displayed.
I quickly looked at the Configuration guide and I see none of the RFC destinations mentioned in the guide.
Is this the reason for the problem ?. I need to know exactly what totell the basis people to look at. They have never done an XI installation before so I'm almost sure they have not done these configuration steps.
Thanks
Andre

Hi Andre,
They should look at the intallation/configuration guides that SAP provides. These guides can be found at the service.sap.com and/or help.sap.com
In a nutshell you have to make sure they have configured:
SLD settings, these involves configuring RFC destinations, Maintain the SLD parameters in SLDAPICUST.
Register, Starting up the queues. Configure the role of the integration server in trx SXMB_ADM or SXMB_ADMIN.
Hope this helps.
Cheers,
Roberto
Message was edited by: Roberto Viana

Post Installation Steps for ERP add-on Inventory Manager 4.0

Hi,
I need to confirm what are the post-installation activities we must to perfom for ERP Add-on (Inventory Manager 4.0), besides de BC Activation. I did not find any information regarding the post installation steps for the ERP Add-on of Inventory Manager 4.0 (the installation guide for IM 4.0 on service marketplace does not remark the steps only explain the theorical part of the installation)... And we need to confirm if the steps are the same of Inventory Manager 3.2 Add-on or we must do an additional step?
Best Regards,
MC
Stephen Streeter Manju Venkatesha

Yeah...of course...
I forgot to specify it.
I install the first ERP 2005 SR2 on Oracle 10.2.0.2 and the other have to be installed on the same version of DB.
All installation are not MCOD.
This mean every installation has its own DB with different SID for every installation.
And of course I have at least doubled the space required by installer. Taken from sap notes the required space for ERP 2005 SR2 is about 90 GB.
The total space of mount point is about 500 GB....
Thanks
Dan

EP 7.4 specific post installation steps

Hi,
Installing EP on NW7.4 SR1 .
After the installation, are there any EP 7,4 specific post steps need to be carried out?
Any template installer needs to be ran?
I will appreciate your help and guidance
Thanks in advance

Hello Daniel,
Please check post installation steps at 82 page https://websmp203.sap-ag.de/~sapidb/011000358700000881042012E/nw740_win_db6_java.pdf
BR,
K.

Post installation steps for EP 7.0

Hi All,
I have installed EP 7.0 SR1 on windows with Oracle and its successful. (I have selected usage types Java and EP during installation).
As per the installation guide its said to login as below:
http://<hostname>:50100/irj --> but when i open it, it says The requested resource does not exist. But i am able to open normal NW page: http://<hostname>:50100 and access UME, SAP NW Administrator>..
I have applied permanent license in Visual Administrator. but didnt do any of the post installation steps. I didnt see any of the post installation step in guide also, could you please guide me in completing this?
Thanks,
Subbu

Hi All,
Thanks for ur response, i am able to open the portal by giving the address as u mentioned..thank u..But i am facing problem as i couldnt see some options: I read the following in help.sap.com
When you install a portal, you also install predefined system templates for all the connectors that the portal provides. These templates are contained in the System Landscape Templates folder, under
System Administration--> System Configuration --> Portal Content --> Templates
, and can be edited in the Property Editor. Editing a template affects any systems that you create based on this template
I am able to navigate System Administration--> System Configuration but not able to see the option
Portal Content --> Templates
The other point mentioned is:
The system administrator can disable logon by means of the IP address as follows:
Navigate to System Administration --> System Configuration -->
Service Configuration
. i m not able to find the option Service Configuration here??
I have installed NW 2004s SR1, in help.sap.com they didnt mention anything specific abt. release. Could you please guide me why i am missing those options??
Thanks,
Subbu

Oracle Enterprise Repository post installation steps failed.

Hi,
I was able to install Oracle 11g Express and Weblogic 10.3.6.0 and 11.1.1.6.0 and when try to follow post installation steps to extend a domain installation fails with following steps. Could you please assist me
what could i have done wrong or suggest me hints to locate the error.
2013-01-30 23:08:04,768 INFO [WizardController] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - C:\Oracle\Middleware\wlserver_10.3\common\lib\components.xml does not contain component elements and will be skipped
2013-01-30 23:08:11,830 INFO [WizardController] com.oracle.cie.wizard.domain.gui.tasks.MultipleTemplateSelectionGUITask - Selected required template: Basic WebLogic Server Domain:10.3.6.0 [C:\Oracle\Middleware\wlserver_10.3\common\templates\domains\wls.jar]
2013-01-30 23:08:15,362 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2013-01-30 23:08:15,471 WARN [WizardController] com.oracle.cie.domain.AbstractTemplate - Could not find component name 'Oracle Enterprise Repository' version 'null'
2013-01-30 23:08:15,471 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Replacing component reference Oracle Enterprise Repository version null with top-level component reference: WebLogic Server version 10.3.6.0
2013-01-30 23:08:15,471 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.6.0 to WebLogic_Server_10.3.6.0_wlserver_10.3_ORACLE_HOME
2013-01-30 23:08:27,096 INFO [WizardController] com.oracle.cie.domain.assignment.ServerMachineAssignment - ListenPort internal Validation result= [null]
2013-01-30 23:08:28,737 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
2013-01-30 23:08:32,580 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - Generation Error!!
Traceback (innermost last):
(no code object) at line 0
SyntaxError: ('Lexical error at line 6, column 11. Encountered: "@" (64), after : ""', ('<iostream>', 6, 11, 'oerPort = @DOMAIN_LISTEN_PORT@'))
 at org.python.core.parser.fixParseError(Unknown Source)
 at org.python.core.parser.parse(Unknown Source)
 at org.python.core.Py.compile_flags(Unknown Source)
 at org.python.util.PythonInterpreter.execfile(Unknown Source)
 at org.python.util.PythonInterpreter.execfile(Unknown Source)
 at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1574)
 at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1322)
 at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1305)
 at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:143)
 at com.oracle.cie.domain.TemplateImporter.generate(TemplateImporter.java:274)
 at com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:216)
Thanks
Edited by: 985275 on Jan 31, 2013 12:13 AM

Hi,
After installing Oracle DB, did you Install RCU setup succesfully??
If not, Install RCU and then procced.
-Santosh

Post Installation steps for Messages archiving from Adapter engine

Hi,
Can any let me know the post installation steps for Archiving messages from AE.
We are archiving the messages from Integration Engine (BC_XMB).
This note refers to the Post installation steps... But i could not find them anywhere.
Note 790226 - Messages in AdapterEngine/PCK database do not get archived
Thanks,
Tanuj
Message was edited by:
Tanuj Kumar Bolisetty

Hi Tanuj,
have a look at note 872388
"2) For messages in the Adapter Framework: note 816022, question 8
(deletion) and
http://help.sap.com/saphelp_nw04/helpdata/en/cf/b2fc3f48ecc742e10000000a
1550b0/content.htm (archiving)"
Additionally consult the troubleshooting guide,page 110
Set the adapter service properties (note 791379)
Hope it helps
Jaime

Post installation steps for PI 7.0

Hi,
Can anybody send me the Post installation steps for PI 7.0?
Thanks in advance..
~Kumar

Hello,
 
We did PI Installation recently and version is 7.1
 
Steps are as under...
 
 1. Basic PI installation
 2. System checks after basic installation
 a. SM50
 b. SM21
 c. ST22
 d. SM12
 e. SM13
 f. SM37
 3. Unlock the 001 client for cross-client changes temporarily and set system timezone (STZAC)
 4. Change 001 client settings back to no changes allowed.
 5. Create BASIS team member accounts in ABAP Stack and assign SAP_ALL.
 6. Set directory permission for \usr\sap\trans directory on Transport Domain Controller system.
 7. Import profiles (RZ10)
 8. Add the 4 following entries in to the instance profile and restart instance(RZ10)
 a. DIR_TRANS =
hostname.domain.ext\sapmnt\trans
 b. icm/host_name_full = hostname.domain.ext
 c. login/system_client = 100
 d. icm/server_port_0 = PROT=HTTP,PORT=5<sysno>00,TIMEOUT=1800,PROCTTIMEOUT=1800 {SAP Note 1107808}
 9. Configure TMS in transport domain controller{PI DEV} (STMS)
 a. Add virtual system
 b. STMS in newly installed system and configure proper transport domain
 c. In domain controller approve the new system (STMS -> SAP system -> Approve)
 10. Get maintenance certificate and SAP license from service marketplace and apply in to the new system {ABAP and JAVA} (slicense and NWA)
 11. Kernel Update JSPM
 a. JSPM update
 b. Kernel update
 c. BC-FES-IGS update
 12. Support pack installation ABAP
 a. SPAM update
 b. Support packs update
 13. Support pack installation JAVA
 a. Apply support pack stack
 b. Apply support pack patches
 i. After JVM installation Error occurs apply MS windows KB973544 {SAP Note 1367498}
 c. Restart JSPM and continue patch installation
 14. Client copy from client 001 to X00 using profile SAP_ALL
 15. Create logical system and assign it to new client (SALE)
 16. Change UME target in JAVA to client X00.
 a. Enter URL as http://hostname.domain.ext:port/nwa
 b. Management -> Infrastructure -> Destination
 c. Logon data TAB change client to X00
 d. Restart JAVA Instance
 17. Create following users
 a. PIAFUSER, PIRWBUSER, PIISUSER, PIDIRUSER, PIREPUSER and PIAPPLUSER on the target SLD and new system manually and assign role/group SAP_SLD_CONFIGURATOR to them. {SAP Note 1309239}
 b. PISUPER in new system and assign appropriate roles in ABAP and JAVA
 c. SLD_DS_<SID> and SLD_CL_<SID> on target SLD {Use source system master password}
 d. JCoRFC_<SID> in new system
 e. Sapadm user in new system
 18. Assign roles and groups to BASIS team on JAVA Stack
 19. Create PUBLIC logon group (SMLG)
 20. Configure SLD collector job as sapadm (RZ70)
 21. Run Configuration Wizard
 a. Enter URL as http://hostname.domain.ext:port/nwa
 b. Configuration management -> Scenarios -> Configuration Wizard
 c. Select Initial Configuration and click Start.
 22. Create the JCoRFC connection.
 a. Enter URL as http://hostname.domain.ext:port
 b. Web Dynpro -> Content administrator -> Maintain JCo destination
 c. Fill in information for the following 4 entries using client X00 and JCoRFC_<SID> as the user {Make sure you note the distinction between Metadata and Model destinations when you are creating the destination}
 i. WD_ALV_METADATA_DEST
 ii. WD_ALV_MODELDATA_DEST
 iii. WD_MODELDATA_DEST
 iv. WD_RFC_METADATA_DEST
(Use dictionary Meta Data for the Metadata connections, use Application Data for the Model Data connections.)
(Use the master password for EXQ)
 23. Repeat for the remaining 3 JCo RFC destinations.
 24. Run PI Full Qualified Host Name Wizard {SAP Note: 1320707}{Make sure you check the host names for integration server and SLD}
 25. Create RFC destination in to ERP target system (SM59)
 a. Give Name PI_INTEGRATIONSERVER
 b. Connection type H
 c. In Technical settings TAB provide
 i. Target host = hostname.domain.ext
 ii. Path Prefix = /sap/xi/engine/?type=entry
 iii. User information is blank
 26. Setting SXMB_ADM ERP target system
 a. Open Integration engine configuration
 b. Goto -> Change Global Configuration Data
 c. Role of Business system = Application System {This is optional}
 d. Provide RFC destination name in Corresponding Integ. Server = dest://PI_INTEGRATIONSERVER
 27. Schedule Standard Jobs as SAPADM in client X00.
 28. SICF service to activate
 a. /default_host/sap/public/bc/pictograms
 b. /default_host/sap/public/bc/webicons
 c. /default_host/sap/public/bc/its/designs
 d. /default_host/sap/public/bc/workflow
 e. /default_host/sap/bc/ccms
 f. /default_host/sap/bc/webdynpro/sap/CTS_BROWSER
 g. /default_host/sap/bc/webflow
 h. /default_host/sap/bc/workflow
 i. /default_host/sap/bc/workflow_xml
 j. /default_host/sap/bc/xmb
 k. /default_host/sap/bc/ping
 l. /default_host/sap/xi/wsdl_sr
 m. /default_host/sap/xi/wsdl_url
 n. /sap/bc/webdynpro/sap/appl_soap_management
 29. Adjusting JNLP Heap size
 a. Open the Exchange profile through the link u201Cadministrationu201D from the web page of the Process Integration tools.
 b. Under the folder u201CIntegration Builderu201D click on the variable u201Ccom.sap.aii.ib.clientjnlp.j2se.maxheapsizeu201D
 c. Value = 1024
 d. Save the change and restart the J2EE instance of PI so that the new value can take effect.
 30. Create RFC destination for Advanced Adaptor Engine in sender ERP system(SM59)
 a. RFC Destination = AAE_<SID>
 b. Connection type = G
 c. Target Host = Host Name of AAE Server {PI Server}
 d. Service No. u2013 HTTP port number of AAE Server
 e. Path Prefix = /XISOAPAdepter/MessageServlet?ximessage=true
 f. Under Logon & Security use PIAPPLUSER with PI target systemsu2019 master password.
 31. Create RFC destination <SID>_ALE in ERP Source system with user ERQALEUSER {Make sure you have this user created in new installed system}
 32. Install External Driver Configuration in Process Integration 7.1 Using JSPM {SAP NOTE: 1138877}
 
Please let me know if I am missing anything there...
 
Cheers,
 
Yogesh

Wht r post installation steps of BW 3.5 & how to check it installed correct

Similar Messages

Maybe you are looking for