WHT R THE TYPES OF SCREEN IN SAP R/3?

I WANT TO KNOW THE TYPES OF SCREEN IN SAP R/3

hi murali,
in sap we can have screens like
1.NORMAL SCREEN [used generally for displaying o/p's]
2.SUBSCREEN [ used for various purposes as pop up windows, message boxes,..........]
3.MODEL DIALOG BOX [used in modular programming when we have to display more than one screen based on conditions ex: tab strip control in Modular pools ]
4.SELECTION SCREEN [ displayed automatically by system when
parameters , selection screens used in reports r Module pool prgs ............]
if helpful reward some points.
with regards,
suresh.

Similar Messages

I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. help

I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. I've tried restarting my computer, didn't work. Help!

Well I figured it out, right click the arrow that makes the screen bigger and unclick the Hide Toolbar. I knew it couldn't be that hard.

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

You can take some of the steps here, #4, #5 or even trying a #18
Step by Step to fix your Mac
but I suspect your going to first have to create a data recovery drive
Create a data recovery, undelete boot drive
to get your data off the machine,
then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
Step by Step to fix your Mac

I recently spilled liquid on my computer, but it is up and running, it loads and brings me to the safe boot screen where I need to type my password, but It is not recognizing it, help! How do I get passed it or fix it!

I recently spilled liquid on my computer, but it is up and running, it loads and brings me to the safe boot screen where I need to type my password, but It is not recognizing it, help! How do I get passed it or fix it! I have tried holding the apple key and "s" and then type in the code to reset the password, but my keyboard is not letting me use the numbers or any keys that are accessed by holding shift! Please help me get passed this screen

Fluids and electronics do not mix.
You have caused some serious damage to parts of your computer, and likely voided the warranty until Apple completes a repair and re-certifies it.
Step one is to turn it off and do NOT (did I say do NOT yet?) turn it on again yourself.
Take it to an Apple store and be prepared for a large repair bill.
Sorry, but that is the truth.

Which type of data should I choose in transfering the R/3 table to Sap BI 7

Dear Experts,
I am transfering the one ABAP TABLE with all the fields from sap r/3 to sap Bi 7.0 system.
I went to sap r/3 system and by using SBIW I clicked on maintain generic data sources and I am in confusion , which type of data I should opt for transfering the R/3 table into BI system.
a) Transactional
b) Texts
c) attributes.
please explain me when to choose these 3 different options ?
waiting for a reply from you experts...
Thanks a lot

Thanks but I want to tranfer a Complete table with all the fields into sap BI system, so how can I proceed ,bcse may be the table contails all the types of data ie., master data attributes , texts and as well as transaction data,
I am in confusion ,please tell me the steps to transfer the table with all the fields( 72) in to sap system.
it would be helpful if you can spend some time for my question.

TS4123 I have problem with iTunes story (secure link to itunes store failed). I make In the "Command Prompt" screen, type in netsh winsock reset the itune story is solve but after i close itunes the problem is back

I have problem with iTunes story (secure link to itunes store failed). I make In the "Command Prompt" screen, type in netsh winsock reset the itune story is solve but after i close itunes the problem is back

The results show that you have a proxy server set and this can often cause problems with iTunes.
The proxy setting can be accessed in Internet options>>Connections>>LAN Settings.
Try un-checking the proxy server check box.
It might also be a good idea to run a malware check if you didn't know you had the proxy server set.
You can download a free version of an excellent scanner- Malwarebytes here:
http://www.malwarebytes.org/

Light white lines appear raise at the bottom of screen ..wht to do??

Light white lines appear raise at the bottom of screen ..wht to do??

Light white lines appear raise at the bottom of screen ..wht to do??

When I use the type tool or the selection tools, my photos blink between the photo and a black screen. Anyone else have this issue?

When I use the type tool or the selection tools, my photos blink between the photo and a black screen. Anyone else have this issue?

Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?

When setting up my apple id for the apple store I get to the credit card screen and it tells me I have to contact support to finish. I can't seem to contact support as there is no number for them on this type of issue.

When setting up my apple id for the apple store I get to the credit card screen and it tells me I have to contact support to finish. I can't seem to contact support as there is no number for them on this type of issue. How the **** to I talk to a person who can fix this?

It's a real problem when you're deployed outside the US and your billing address, though totally correct, is not. This seems to be a common complaint. I think the billing address vs. your present location causes some security concern or similar nonsense that prevents progress.
The only way I know of to resolve this is to contact iTunes Support by email. I have never had to wait more than a day for a response:
http://www.apple.com/emea/support/itunes/contact.html
The response should not be "automated'. Explain your circumstances. You deserve a personalized response.

How to garantee IDOC types are the same on two communicating sap systems.

Hi all:
    how to garantee IDOC types are the same on two communicating sap systems, including segments and versions, using bd64?
    what's more, what bd64 using for besides generating parter profiles, must we use bd64 for outbound idocs?
    Thank you very much
best regards ?

Hi jingying Sony
You can compare the Idoc type and Version between Sender System and Reciver System.
Use TCode SCMP and Compare the Table EDIMSG in Both System.
This will solve your issue.
Thanks
Ramesh

I cannot type a web page on my iphone5 on the search or enter website name window of safari. as I type w the system brings me back to the phone main screen. This has happened since I updated to the new iOS 8

I cannot type a web page on my iphone5 on the search or enter website name window of safari. as I type w the system brings me back to the phone main screen. This has happened since I updated to the new iOS 8

You haven't mentioned any steps you might have tried to correct this so I'll suggest you try the first troubleshooting step. Reset your iPhone. Press and hold the Home and Sleep/Wake buttons simultaneously until the Apple logo appears. Then release the buttons and let the device restart. No data will be lost doing this. It's like rebooting a computer.

My phone needs a restore but I can not because my pass code is active. It only allows me to go to the emergency call screen. I can't type in my pass code What should I do?

My phone needs a restore but I can not because my pass code is active. It only allows me to go to the emergency call screen. I can't type in my pass code What should I do?

Thank you so much I actually did have restrictions enabled. Ur too sweet thanks again for your help

HT201210 The new iOS 7 download changed the screens tremendously making them difficult to read. How can the type be darkened and enlarged? Can you revert back to the old program?

I downloaded iOS 7 to my iPhone. Now everything is lighter making it difficult to see. The words (letters) are smaller and the type is lighter.
Questions:
Is there anyway to change the type to display more distinctly as it did on the older version?
If not, is there anyway to return to the older version?
Also, on my weather app, my city name keeps changing to Southwood, SC. Sometimes I have both but usually the Southwood takes over my home city selection. I don't know where Southwood, SC is located and do not want it on my phone.
Why is the app changing my selected home city to Southwood, SC?
How to I stop it from changing?
Also, the top city on the weather app will not allow you to delete it. Why is this? The other additions can be deleted.

Hi Jean4438,
Welcome to the Support Communities!
I made the changes below to my iPhone and have personally been delighted with how much easier everything is to read. Hopefully they will help you as well.
Large and bold text - iPhone User Guide
http://help.apple.com/iphone/7/#/iph73b89c6
Here is the information for making changes to the Weather app:
In most situations, you will swipe from right to left to see the Delete button.
Weather - iPhone User Guide
http://help.apple.com/iphone/7/#/iph1ac0b35f
Although this isn't your specific iPhone model, the tips and tricks in this new document may help you get started with iOS 7:
Apple - iPhone - iPhone 4s Tips and Tricks
http://www.apple.com/iphone-4s/tips/
I hope this information helps ....
Have a great day!
- Judy

My 4th generation shuffle will not play podcasts. It is set to play in order. The podcast show on the laptop itunes screen as showing loaded in my shuffle. the type shows up gray. why the new annoying content format?

My 4th generation shuffle will not play podcasts, even though they show as loaded on the legend on the left on the itunes site. The shuffle is set to play everything in order. The type on the content is gray, thats strange. And why the new annoying content format?

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

Wht r the advantages of using bdc rathan than lsmw?

Hi , I want to knwo.. wht r the advangtages of using bdc rathan than lsmw.,,,

Hi,
LSMW and BDC are vastly different.
BDC (Batch Data Communication) is a technology used for data transfer.
it is meant for transferring data thru SAP transactions itself. when u use BDC for data transfer,
the sequence of steps is the same as when u use standard sap transaction screens for data upload. the only difference is that u can use different options for foreground/background processing.
LSMW on the other hand is a tool that helps migrate data from a legacy system (non-sap system ) to SAP system.
it offers u various options to use either batch input, direct input, BAPIs or idocs.
it involves a series of some 17-18 steps to migrate data.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system
or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Session method is to populate the data by filling BDC structure
and keep as session to process from SM37 to post in appropriate Transaction.
Call transaction method is to post the data directly into the Transaction from an Executable program.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
LSMW:
The LSM Workbench is an R/3-based tool that supports You when transferring data from non-SAP systems ("Legacy Systems") to R/3 once or periodically.
The tool supports conversion of data of the legacy system in a convenient way. The data can then be imported into the R/3 system via batch input, direct input, BAPIs or IDocs.
Furthermore, the LSM Workbench provides a recording function that allows to generate a "data migration object" in an entry or change transaction.
The main advantages of the LSM Workbench:
Part of R/3 and thus independent of individual platforms
A variety of technical possibilities of data conversion:
Data consistency due to standard import techniques:
Batch input
Direct input
BAPIs (Business Application Programming Interfaces)
IDocs (Intermediate Documents)
The import technique to be used in an individual case depends on the business object.
Generation of the conversion program on the basis of defined rules
Clear interactive process guide
Interface for data in spreadsheet format
Creation of data migration objects on the basis of recorded transactions
Charge-free for SAP customers and SAP partners
http://help.sap.com/saphelp_nw04s/helpdata/en/87/f3ae74e68111d1b3ff006094b944c8/content.htm
http://www.sap-img.com/sap-data-migration.htm
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
http://allsaplinks.com/lsmw.html
http://myweb.dal.ca/hchinni/sap/lsmw_home.htm
some more links
BDC
http://www.sap-img.com/bdc.htm
LSMW
http://www.sap-img.com/sap-data-migration.htm
http://www.sapgenie.com/saptech/lsmw.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary
Thanks.

WHT R THE TYPES OF SCREEN IN SAP R/3?

Similar Messages

Maybe you are looking for