Why 2 times printing 2nd page?

Hi Experts,
In Samrtform, I hv like,
MY_FIRST_PAGE
command node : GO_TO_2nd_PAGE (with condition of triggering - Only one page--MY_FIRST_PAGE) ,
my_text
MY_SECOND_PAGE
break-point_1
command node : GO_TO_2nd_PAGE (with condition of triggering - Only one page--MY_FIRST_PAGE) ,
my_text
So, here its printing first and second pages normally,
but, after printing the my_text in socond page, the control is again going to break-point_1 and again its printing my_text in 3rd page, which i dont want to b!
So, What culd b the reason that, Why the control after printing the my_text in 2nd page, again its going to break-point_1 and prnting my_text in 3rd page?
ThanQ.
Message was edited by:
Sridhar

Similar Messages

How to print 2nd Page/How to call 2nd page

Hi
Actually in my report there was only one page and I want to add 2nd page which I have added. Now system is not showing 2nd page in output. I put a break point in 2nd page and found that system is not going inside 2nd page. I mean not triggering 2nd page. Can any one help me on this.
Thanx in advance
Rajesh Vasudeva

Hi Rajesh
right click create-> flowlogic->command
here chek goto new page and specify your second page name.
Try this too.
Instead of creating new page with another main window create a new page with secondary window and in first page main window -> general attributes set next page : first page itself and create a command as i showed the path and in that set second page.
This will surely solve your problem
Regards
Swetha.

Acrobat 8.1.4 only prints 1 page when I select "all"

Hi all,
I'm hoping you can help me. Just spent 27 minutes on hold with Adobe tech support and gave up.
I have an iMac running OS 10.5.8 and had successfully used other versions of Acrobat. I bought a ScanSnap printer and it was bundled with Adobe Acrobat Pro 8.1.4. Installation seemed to go fine, but now when I try to print a multi-page document, it only prints one page, even when I check "all" on the print menu.
Also, when I try to click on print prevue, it says "Prevue is not supported." That's new, too.
So far I'm not thinking this is such a great bargain, even for free! Can you help?
Thanks,
Kathy

Print preview is not supported any longer. I think it is due to the fact that both use pdf technology and there may be a conflict.
As to why it only prints one page rather than all, that is a hard one. You could try deleting the printer driver and re-installing the driver to see if that helps.

Firefox will show PDF's but prints blank pages. Other browsers are fine, safe mode has no effect.

Currently on an HP laptop, Win8, printing to a HP Color Laser, no previous problems; all of a sudden, PDF's are printing blank pages. I can see the page fine. Safe mode without any addons has no change. I printed my taxes out and had no problems.
I've used IE (shudder) an been able to print PDF's fine. I have no PDF software itself on the computer, just using the browsers native support. EXTREMELY FRUSTRATING. Searching shows problems loading PDF's, but my problem is printing PDF's. Using version 29 of Firefox. Anyone got any tips or clues how to hunt this down? Really close to introducing my computer to Mr. sledgehammer.

Thanks, appreciate the links for PDF driver add ons, this will be my last resort if nobody else can figure it out. I don't use Acrobat because of all their bloatware and hidden installs. I still would like to know why Firefox started printing blank pages in PDF's, but can still open the PDF's, very frustrating. Seems like a few other people are having the issue as well.

Trouble printing multiple pages, not multiple images per page

I have just upgraded to PS Elements 10 and am having a challenging time printing multiple pages of the same document (image). These are labels that will be run, so we do 300 of the same image at a time, one per page (label). From the open Elements .psd file I choose print and set the printer settings, and then choose the amount of labels to print. No matter what number I put in for the Print X copies of each page, it still only prints one. When I convert it over to the organizer it seems to work with printing multiple copies. Having to move each file over especially if we are just wanting a quick test run is very time consuming and troublesome. It seems like there should be a simple fix that I am missing in the Elements program.

Hi,
Try following the steps below and check if that may help:
- Open the HP software by clicking the HP ENVY 5530 icon within the Desktop or the Start Menu, then click the Printer Home Page (EWS) link.
- Click the Network tab.
- Depending on your printer model click on Networking and then on Network Address (IP) or click on IPv4 within the active network connection type.
- Click on Manual IP , and then click Suggest a Manual IP Address . A manual IP address, Subnet Mask, and Default Gateway displays.
*Be sure to take a note of the IP address and Confirm the changes, then close the EWS page.
- Click the HP ENVY 5530 icon within the Desktop or the Start Menu and click the Utilities tab, then click on Update IP Address.
- Type the manually configured IP address, click on Save and confirm.
- Open the control panel and go to Devices and Printers.
- Right click the HP ENVY 5530 icon and select Printer Properties.
- Open the Ports tab.
- Click the Add Port button, select Standard TCP/IP and click on New Port.
- Follow the steps by typing the manually configured IP address and confirm the changes.
Now try printing and check if the issue been resolved.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

When I print from my pad it only print one page at a time, why?

Why can I only print one page at the time when using the iPad?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

I am trying to print a snapshot taken from a PDF multiple times on one page.

Reader Will not print multiple copies of a snapshot on one page. I read the help files for Acrobat itself and all it said was take the snapshot and print it. Does anyone know if Acrobat can print multiple copies of the snapshot on one page?
From some reading in another forum page it looks like Acrobat can do it by saving the snapshot repeatedly with different names and the printing all of them at once. I really hate that workaround as I need to do this often.
Message was edited by: duckles10

I tried to do it using Reader. I have a one page PDF document with a UPS shipping label on one side and a special box label with a barcode on the other. This is designed to print on a standard 8.5 x 11 sheet of paper. There are many times when I need to be able to print the box labels more than once. At home, I do it by taking a snapshot of the box label and printing it to a Label printer as many times as I need it. The distributor who also ships items for me only has a full page printer but he can print 4 on a page labels on UPS provided stock. Reader won’t print a snapshot multiple times, the option is grayed out. What I wanted to know is if Acrobat itself can print that snapshot multiple times. I don’t think it can without being able to cut and save that PDF multiple times as separate files. That would be a slow and cumbersome operation. If it would take a snapshot or a single cut and save and print that PDF 4 times on a page it would be a reason to spend the money to buy the program because we need to perform this operation OVER and OVER on a regular basis. On some shipments we might need to print 12 or more extra box labels. We tape smaller boxes together for one UPS label and need to make sure EACH box gets a separate label. Otherwise they sometimes get lost on the other end.
Doing the save 4 separate PDFs process we might actually need TWO copies of Acrobat unless reader can print 4 on a page if it has 4 PDF’s to work from. I have not yet found a good way to save those snapshots from reader. I have tried since I found that it was possible to cut and save them in other formats but not PDF’s as reader can’t save them. The quality of the saved items in other formats is not acceptable. I recently discovered that Microsoft publisher which I have can save a document as a PDF. I’m going to see if I can import to that program next.

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5. Can this be overcome?

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5. I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

You can use printPages(1, 5), however I need to know how you print current page.

How do I print one page at a time for a photobook .pse project?

I am trying to print a photobook project one page at a time as I am using double sided paper that I need to turn over. One other project I did asked me if I wanted both sides and would I do the turning myself, but this one doesn't. I also wanted no border on the prints and it came out with a border. It is also frustrating to have to wait for it to load 75 pages and then it prints them back to front. Is this PSE or the printer software?

Yes, you can print one page one at time as you want .
In print dialog, select other pages and click on remove button.(refer to screenshot).
For border click on more options and ensure check box is not selected ( refer to screenshot)

Can only print one page at a time

Using Adobe Reader 9.4.2
Operating system Arch Linux
Printer Brother DCP-115C
When trying to print more than one page at a time in a PDF document,
Adobe Reader appears to create the print
the print job appears in my print queue
the printer says 'Receiving Data', but only momentarily
the printer resumes 'normal' status
the printer does not print anything
It is as if there is very little data actually sent to the printer, even though the print job appears to be 254k in size
When I try to print one page at a time from a PDF document
Adobe Reader appears to create the print
the print job appears in my print queue
the printer says 'Receiving Data' for several seconds
the printer prints the page
no problem
It seems to me that Adobe is creating a print job (for multiple pages) that the printer either does not understand, or the printer believes that there is nothing to print.
I am able to print everything that I need to, but only one page at a time!
Does anyone else experience this problem? Do you know how to overcome this?

You can use printPages(1, 5), however I need to know how you print current page.

Printing date and time in all pages

hi frds
i wants to display or print system date and time in every pages can anyone give me coding .
by
Pari Vendhan.R

Hi Pari,
Please write the system date and time in TOP-OF-PAGE event so that it will be printed in each page of output.
Example:
report zdatetime
line-count 60.
START-OF-SELECTION.
*-- write your code here
TOP-OF-PAGE:
write: 'Date: ', sy-datum.
write: / ' Time: ', sy-uzeit.
In top of page write other details along with date and time. Here in the above declaration after each 60 lines a new page will be triggered and TOP-OF-PAGE will be called for each page before first write statement.
Regards,
Yellappa.

Laserjet 2100 will only print one page at a time.

I recently acquired a second hand Laserjet 2100 Series. Installation was fine but it will only print one page at a time, I have to keep pressing the 'Go' button, which is very frustrating. The manual tells me that it is in 'Manual' mode but not how to change it. Can anyone help, please? O/S Windows 7. Thank you.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Appleworks will only print one page at a time, please help!

hi there ~
no matter how many times I ask the printer to print ALL pages, it will only print one at a time, so I have to manually print page 18, 17, etc....
Could this be because the pages are arranged left to right? that would seem strange.
also, I cannot find a function to re-arrange the pages. for example, i want to re-organize to make page 18 at the front as page 1. I just don't get it though I've searched the program.
THANKS SO MUCH!

Hi td,
Welcome to AppleDiscussions and the AppleWorks forum.
"no matter how many times I ask the printer to print ALL pages, it will only print one at a time, so I have to manually print page 18, 17, etc...."
My memory says the same as Yvan's.
If the printer dialogue has a checkbox labeled "Collate", make sure the box is checked, even if you are printing a single copy. If memory serves, this suggestion was made in connection with HP printers.
A second possible solution is to specify the page range when printing this document (or others that exhibit this problem). (eg. for a 25 page document specify printing From page 1 To page 25.) You might try specifying p. 1 to p. 99 for any document under 100 pages, although I don't know what effect this would have for a 5 page doc.
regards,
Barry

InDesign CS5 only prints one page at a time.

InDesign CS5 only prints one page at a time. No multiple copies. Each page in a document has to be printed one at a time. I didn't have this problem with any version before this. No matter what I do, change settings, etc. I still have the same outcome. How do I work around this problem so I can print a 5 copies of a 3 page document without having to do each copy of each page one at a time.

Sounds like a printer driver issue. Can you export to PDF and print that correctly?

Printing data sent to printer one page at a time

Before, when I printed on my Brother MFC-7840W printer, the data was sent to the printer instantaeously. But now, on my new MBA with Mavericks, when I print something, the printer queue says 'Printing - Sending data to printer" and sends the data one page at a time as it's getting printed. In other words, I can't close my laptop or disconnect from the printer until all the pages have been printed. Anyone knows how I can fix this?

I have THE SAME issue
I bought a HP Laserjet Pro 400 in August 2013, and it worked great till I upgraded to Mavericks
Now, it prints 1 page, waits 20 seconds, then prints another
my 18 ppm printer is now like 1.8ppm
I hooked up a windows laptop to print the same document, and it screams through in top speed
After updating the hp printer firmware, apple drivers, and replacing the cartridges, the problem points to Mavericks

Why 2 times printing 2nd page?

Similar Messages

Maybe you are looking for