? why ?32 bit ? Legacy Jam Packs Work in GB v.10.x

Hello,
I am running OSX 10.9.3 on a Mid Summer 2010 iMac , Prior I had installed Jam Pack One (non genre ) in the Version of Garageband (5.1) that was installed on my iMac (and mine came with OSX 10.6.4 + 2 install disks, Operating System and Applications ) I updated from Snow Leopard OSX 10.6.9 to Maverick (Never installing or buying Lion or Mountain Lion ) I downloaded Gargeband Version 10 and its updates as well as the additional content
for $4.99.
I read that MainStage 3 contains (beside its content ) the Apple Jam Packs but in 64 bit mode (and MainStage works
with Garageband V 10.x as well as Logic X . For the cost MainStage 3 appears a very reasonable price
( I do have 4 un opened Jam Packs Remix, Symphony, Rythmn and Voices (all but World Instruments )
I am mainly interested in the Virtual Instruments , more than loops (as well as AU, effects amps, pedals but can use real instruments as well Guitar-effects-amp-mic via Audio Interface Focusrite Scarlett 2i2
But have read + and - comments on MainStage , I added ram (was 4GB now 12GB ) 4GB x 2 2GB x2
and plenty of HD space , dual core 3.06GHz . Just puzzled why the Jam Pack (I added to GB V 5.1 works (Virtual Instruments , under Legacy (and assuming the Jam Pack is 32 bit (When I bought it first was using it with a eMac
1.25GHz 1.0GB ram , I considered adding one jam pack (Remix or Symphony) to GB 5.1 but would rather keep them sealed for potential sale down the road, I took off time recording,playing due to one spine surgery then two knee surgeries Thanks in advance ,
diamond blues

Hangtime
Just a fyi, it WORKED ! No Error Message (other than some read files were not able to open, but installers ran
just right !
I added 4 for 4 Apple Jam Packs Remix-Symphony -Rynthmn and Voices ! All from sealed boxes I had bought
awhile back from a Apple Reseller who annually or sometimes x2 has a online "Garage-Sale" Paid no where
what retail would have back in the day (I did buy Jam Pack 1 non-genre for full price , when using a e-Mac
and it was >$95.00 . These all tested and pull-show up under Legacy as did Jam Pack 1
Thanks for the advice , I was going to d-load and pay for MainStage 3.x but will not now
Take Care Man
Diamnondblues

Similar Messages

I have a new mac book pro. Will my old jam packs work with the new garageband?

I have a new mac book pro. Will my old jam packs work with the new garageband?

I have same problem, been using a macbook 13" for nearly 9 years but it was failing so I bought a macbook pro 15" and after having problems and error messages when trying to download loops ( I finally went to the App Store and opened garageband from there which install some loops), it finally downloaded some but not all the loops that my jam packs had, also I have tons of non-apple loops that I purchased over the years but I want to know if they will work on my new mac ?
macbook pro 15"- 2.3ghz - 8gb- 2TB

Why doesn't my create pack work?

Why doesn't my create pack do anything that I need it to do. Can't save to pdf, can't retrieve, doesn't recognize format. The free trial version worked; the subscription does not.

If you moved Mail out of the Applications folder, then applied the security update, Mail has been disabled.
It must stay protected in the Applications folder, or you risk the possibility that malware might change it and use it to send spam.
Mac OS X v10.6: "You can't use this version of Mail…" alert after installing Security Update 2012-004

Please help... jam packs not working with logic express 8

my jam packs do not work. i go to the library tab, open one of the jam packs category, "Symphony Orchestra" for example. i choose an instrument folder ("strings" for example), and then an instrument. a window pops up and says "File not found... Result code = -43". What does this mean? What can i do to fix it?
You my also know that the jam packs work fine in Garage Band.

Hi,
on a UNIX based system, every file has it's own set of permissions who own it, who can read it or who can write to it. Sometimes, things get corrupted (often during an install or update, when administrator rights are used or not used....)
However: Open the Harddisk Utility in the Applications/Utilities Folder. Select your Harddisk and klick on "repair permissions". Wait for some minutes (takes some time).
You should do this not only now, but before and after every major update/change to your system.
The next step, if this doesn't work, would be to manually locate the files EXS24 is missing, but for this better ask someone in the Logic Pro forum.
Fox

Adding jam packs and loops

Hello everyone. This post may have been answered. Anyway, I have installed all jam packs and sound content on external drive. I was wondering how to index them so i can access them in logic pro as loops. It seems that some are there and some are not. Thank you for reply.
David

1. How do I install everything...
run the installer and when the Customize button appears, click it. use the discloser triangle next to GB to make sure it's ancillary files are selected for installation
2. Is there a list of all available Jam Packs?
http://www.bulletsandbones.com/GB/PluginsApplesJamPacks.html
3. Do Jam Packs work with GB 08 and 09?
yes
4. Does only Apple make Jam Packs? If not, where to go for others?
yes, but may other companies make loops that are Mac compatible. there are also loops available freely on the net, as well as synths and SoundFonts (instruments):
http://www.bulletsandbones.com/GB/PlugInsSoundFonts.html
http://www.bulletsandbones.com/GB/PlugInsMiscLoops.html
http://www.bulletsandbones.com/GB/PlugInsDrumLoops.html
http://www.bulletsandbones.com/GB/PlugInsSynths.html
5. Can I install user created loops?
yes
How
drop them onto the loop browser
and where do I find them?
see the links above.

Jam Pack: Symphony Orchestra not working on new iMac with Maverick

Hi,
i received my new iMac 27 inch Haswell with Maverick installed.
I migrated most of the stuff i need but it seems the Symphony Orchestra Jam Pack instruments weren't migrated to Garageband.
Now i read somehwere that this JamPack doesn't work on Maverick.
Is there a way to download the Jam Pack again? I can't find them anywhere. Why doesn't Apple sell these in the store?
I can't try to install the JamPack again since i don't have a CD Rom drive in my iMac...
How can i restore these instruments on my Garageband?? I need them.
Thanx

MainStage is for setting up a live performance and performing music. It has many instruments and effects. GarageBand is for mixing song arrangements and creating finished songs.
I have never really used MainStage, just for playing my guitar. I bought it to get current installers for the JamPacks.
After you install MainStage, you need to open and run it at least once, to download the full set of instruments and loops.
This will bring up this panel:

Why wont my battery bacy up pack work with IOS 7

Why wont my battery back up pack work with IOS 7?

Spoke too soon. Here's a reply. From another user on here. It worked for me.
I had the same problem after I upgraded to iOS 7 last night and saw that all of my different e-mail accounts merged into one under the "All Inboxes" view. I resolved the problem by deleting just one of my e-mail accounts and adding it back again under Settings > Mail, Contacts, Calenders. Once I added the one account I deleted back under Settings > Mail, Contacts, Calenders my inbox refreshed and showed all of my seperate e-mail accounts as it previously did before I upgraded to iOS 7. Give it a try and let me know if that works for you as well.

How do I get the 12 string effects in MS 3 jam pack 1 to work in garageband

How do I get the 12 string effects in MS 3 jam pack 1 to work in garageband '11

How do I get the 12 string effects in MS 3 jam pack 1 to work in garageband '11

Installed Jam Pack but see no new loops in Garageband loop browser. Why not?

I successfully installed Jam Pack but don't see new loops in Garageband loop browser. Is there some extra step I'm supposed to do? Before, I had about 57 Rock/Blues loops, and I still have just that. I had 14 instruments under All Drums, and guess what? Still only 14.
I know the install completed successfully - it said so, anyway.
Clues?

Have you filters set on the Loop Browser? Make sure the GarageBand Preference "Loops > Keyword Browsing > Filter for more relevant content" is off. Otherwise you will see a fraction of the available loops.
To see, if the JamPack has been installed, set the pop-up meu at the top of the Loop Browser to "Rhythm Section". Is that available?
Did you reindex your Loops after installing the Jam Pack? And did you restart the Mac? In Mt. Lion only restarting a Mac will ensure, that an application is not resumed from a cache, when you launch it again.Restarting the Mac will terminate GarageBand for sure.
If restarting the Mac does not make the JamPack Loops show, rebuild the Loop index. See: Rebuilding the Loop Index in GarageBand 6 or earlier - Apple Support

Why can't I browse jam packs right off the DVD?

I'm trying to use my jam pack DVD's without taking up space on my hard drive. There must be a way to browse jam packs straight off the DVD without installing them. How can I do this?

You'll probably need to show invisible files in the Finder. Try this, for instance:
http://www.versiontracker.com/dyn/moreinfo/macosx/32246

I purchased three jam packs back in 2004- new garageband will not recognize, why?

I purchased three jam packs back in 2004, recently upgraded to new garageband program. It does not find the jam packs purchased earlier. How do I get the program to recognize these loops. "Jam Party 1, World Music, symphony.????

If you only upgraded GarageBand and did not deinstall the old version, the Jam Packs should still be installed. Search for all possible locations, where loops could be installed:
GarageBand, Logic: Where loops get installed
Then reindex your GarageBand Loops.
Rebuilding the Loop Index in GarageBand
Regards
Léonie

How do I get the Jam Pack instruments downloaded from mainstage 3 to show up in Garageband '11?

I downloaded and installed Mainstage 3 to be able to download the jam pack instruments and loops that come with it and use them in Garageband '11. I read that I can use the software instruments in the program, however none of the jam packs I downloaded show up in the list of software instruments in Garageband.
I clicked on the menu which tells me if I want to display 'Garageband','my settings' or 'All' of the instruments, but no 'Jam Pack' option shows up.
how do I get the jam pack instruments to show up in Garageband? I want to know how you import the instruments in the program.

It looks like nobody here is already using Mainstage 3 with GarageBand, since there is no need to upgrade from mainstage 2 while it is still working. What you are reading here on Mainstage, JamPacks, and GB has been tested with Mainstage 2 but not 3.
Did you download all contents for Mainstage? WIth Mainstage 2 the JamPAcks were part of a separate download. Launch Mainstage 3, and check, if there is a menu entry somewhere that will let you download additional contents. If you do not see any JamPacks directly, they may be bundled with "Logic" or "Legacy" items.
In Mainstage 2 it looks like this. Your version probably has a different panel.
Once everything has been installed, reboot.

Lost access to Jam Pack instruments after migration to new macbook pro

I just migrated to a Macbook Pro and now all the instruments from my Symphony Orchestra Jam Pack are no longer available. I was also getting a message "Native Instruments Installation Folder not found" but after copying the instrument files into the Sampler Instruments from my old macbook to the new one, that went away, but I still don't have access in Finale to those instruments.
There's still no "Native Instruments Installation Folder" that I know of, but the message no longer appears.
Are these instruments no longer available in the new Garageband? This is a bit frustrating.

I FIXED IT!!! After AppleCare told me it couldn't be done...
I've been searching for hours online and couldn't find this anywhere, so hopefully someone with this challenge will stumble upon this.
A clue was here: http://www.techvide.com/apple/install-jam-pack-on-mac-os-x-lion
but this didn't correctly describe my issue with an early version of Jam Pack 4: Symphony Orchestra
What I did:
1. Insert Jam Pack DVD 1
2. ctrl-click Install Jam Pack 4 - Show original
3. double-click JamPack4_Instruments.pkg
4. You'll get some Power-PC Not Compatible with Lion warnings (only a few compared with the almost infinite number if you try standard install)
Instruments now appear and work just fine in garageband. <big sigh>
I wish AppleCare would know this, and I hope someone is planning on continuing supporting these Garageband instruments.

Trying to install old Jam Packs on MacBook Air/Lion.

When I try to install my old Jam Pack, World Music, on MacBook Air, it fails at the last minute, giving infinite errors due to PListBuddy not being supported, necessitating a restart. Symphony and Orchestra worked fine. Anyone esle had the same problem or any luck fixing it? Thanks.

So Jam Pack is a bit peculiar. What you'll want to do is:
1. Have the CD in the drive, and the file Install Jam Pack World Music in view.
2. Right-click (control click) on the file, and select Show Package Contents.
3. Open up the Contents folder.
4. Open up the Installers folder.
5. Find WorldMusic_Instruments_Tiger.pkg, and run the installation. You will get a few PListBuddy errors, but these can be closed, and the installation will finish.
6. Find WorldMusic_Loops_Tiger.pkg, and do the same as step 5.
You should be good!
Other info:
Some errors I noticed: It said that the installer was "waiting for other installations to complete". Just open Terminal (Applications -> Utilities), and type: sudo killall installd
Try installing again.

Contents in Jam Pack

I've just been working with somebody in their studio, they showed me the number of items they have under World instruments, in excess of at least 2000 plus. I was amazed and told him these was no way I had this amount, under world on my system.
I wanted to find out if anybody else have is amount when they installed there system and why this is not the case for me?
Ta very much!

Seriously? They really make you install everything on the internal and then move it over? Why would this be the case? Doesn't that get a little messy with re-indexing everything. I installed the basic install disc info a while ago, and have been holding off on the jam packs until I get the external, just to avoid a little wear and tear on my internal drive. I guess I might as well install them now? And move them over later?

? why ?32 bit ? Legacy Jam Packs Work in GB v.10.x

Similar Messages

Maybe you are looking for