Why 3G doesn't work after being updated my iphone 5 to IOS 6.1

I've a problem with my iphone 5 since updating it´s operating system , I mean IOS 6.1 , so it was last thursday when I did that over the air , before I used perfectly my 3G but just after this update it doesn't work as usuall , I'm really disappointed about that and I hope that apple gonna give us the opportunity to correct that by another update this week , On the other hand I live in Casablanca , Morocco

Same with mine. Its disaster. And now making my iphone 5 become warm. Pleaseeee apple don't just release anything that not fixed yet. Feel so sad how come apple like this.

Similar Messages

  • Why wont creative cloud work after being updated?

    i updated aplication manager now when i go to use creative cloud it just comes up as a blank white screen as the home page why?

    Deselect in iTunes, sync. When finished, select tones and sync again.

  • My SuperDrive doesn't work after Lion update

    My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
    Thanks

    I too have had the problem since updating to Lion.  My superdrive isn't even recognized.  I have repaid hard disk permissions and also reset PRAM.  Sure wish I had a fix. 

  • Personal Hotspot menu disappeared after I updated my iPhone to iOS 4.3.3

    Personal Hotspot menu disappeared after I updated my iPhone to iOS 4.3.3
    My carrier provides tethering service and I used it often so I don't think this is from network problem.
    What I remember is that after I upgrade my iPhone to iOS 4.3.3 I once activated personal hotspot function and it was hanged.
    So I reboot my iPhone and the menu disappeared. Is this another bug that is from iOS 4.3.3??

    What is the exact wording of the error message you received?
    Has your iPhone been jailbroken or modified to work with other
    than the original wireless provider?
    Not wise to post IMEI or ICCID in the clear, FYI. I have asked
    the hosts to edit that info in your post.

  • After i update my iphone to ios 7.0.3 my wifi always disconnect.

    After i update my iphone to ios 7.0.3 my wifi always disconnect.

    Me too
    iPhone 5s 32GB worked perfect until upgrade to 7.0.3
    Won't recognise home WiFi network, can't see other WiFi networks in range, association problems with WiFi networks. 3G data also severerly impacted along with complaints that the quality of voice calls has degraded severely.
    I've tried:
    Settings > General > Reset > Reset network settings x 3 times - No joy
    plus
    Settings > General > Reset > Erase All Content and Settings x 4 times and backup or new phone setup via iTunes - Still no joy
    One odd thing - lower signal WiFi does internittently become available when my PC that runs iTunes is booted up and logged into my WiFi network???
    Help!

  • Fit the window with mouse doesn't work after new update 10.9.2

    Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

    Doesn't anyone having this issue?

  • Why won't my camera work after I update my Iphone 3GS to IOS 6.0.1?

    After I updated my phone to IOS 6, it worked fine. But once I updated to IOS 6.0.1, my camera will no longer work. Sometimes it freezes my phone, and my phone goes through 2 resets. Sometimes it just sits at the screen waiting for the shutter to open, and it just does nothing. Other times it acts like it is having a seizure, and then shuts off and brings me back to my home screen like the app just reset.

    User troubleshooting is restart, reset, restore from a backup, restore as a new device. Try those steps.

  • TS1424 I can't open the iTune store after I updated my iphone to iOS 7.

    Hi there, could someone help me here please - I can't open the iTune store after I updated my iphone 4 to iOS 7. The problem occurred about 5 days later after the upgrade. There are no error messages. As I tap on the icon it opens just for a fraction of a moment and then goes off and back to the main screen. Other apps are working just fine. I tried following the troubleshooting steps as suggested by apple support, but that didn't help unfortunately...
    Thank you

    Refer to this article:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368

  • HTML animation effects doesn't work after last update

    After last update my html animation that have different effects with different time: fade, translate, rotation, scale, ecc... plays but some effects doesn't play.
    Various animated png in html project appears immediatly without shows transitions or deformations.
    I have made html animation with Motion Composer that have time curve for each effect.. and all work fine with previous dps desktop tools...
    I don't use Hedge because folios with hedge animation is mooooooooore large than folios with motion composer animation.
    A single complex animation (10 .png(1024x768) with multipe effects fo each) made with composer produce a 1MB folio...
    The same animation made with Hedge produce more the 100MB folio.
    why new version of dps don't show my html anim correctly ? I hope adobe correct this proble. 

    We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
    Neil

  • Flash doesn't work after I updated it

    I am using Firefox 34.0.5 and updated my flash player but after the update it stopped working. The videos doesn't show up. I tried disabling all add-ons and found out that Shockwave Flash 16.0 is causing the problem. What should I do to make it work again?
    I don't know why but some videos work just fine and other videos doesn't show anything even a white or black screen, even though they're from the same site. When a video doesn't show up, the cursor changes from the normal cursor to "working in background" cursor rapidly.

    ''Talha [[#answer-672921|said]]''
    <blockquote>
    Hey,
    Did you try these typical Flash fixes?
    (1) Disable hardware graphics acceleration in Firefox and in Flash
    (A) In Firefox, un-check the box here and restart:
    orange Firefox button or classic Tools menu > Options > Advanced > General > "Use hardware acceleration when available"
    (B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
    (2) Disable protected mode (Win Vista & Win 7 & maybe Win 8)
    See this support article from Adobe under the heading "Last Resort": Adobe Forums: https://forums.adobe.com/message/4468493#TemporaryWorkaround
    Hope it helps.
    </blockquote>
    I did both of these but it still didn't work. I tried using another browser and found out that the problem only occurs in firefox.

  • EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

    Hello Dear,
    I've using my Epson Stylus CX5600 for a  long time with OSX 10.7 Lion on my Mac.
    The printer is connected in another computer (Windows 7) and I can print fine from my macbook air
    After my system update for OSX Mountain Lion yesterday, my printer works fine only on Windows computer
    on my macbook doesn't works anymore
    I've re-installed a lot but when I try to print the sheets appears in blank
    The driver-version available in Mountain Lion is 1.5
    I guess this is the problem and need a urgent correction driver update
    I'm looking forward to the internet and Epsons websites but didn't find nothing,
    in Epson website doesn't
    Can you help me please?
    Thankyou

    Hi my friend,
    I've tryed Bonjour, but only works Windows to install a print for Mac.
    I need the opposite... print from Mac to Windows.
    Yes, I've a lot of problems to install a printer on Lion, but after 3 days I got success
    I can't remember but I did this:
    1. In iMac System Preferences->Print&Fax->"+"
    2. In "Add Printer" click and Tool Bar->Customize Toolbar...
    3. Add "Advanced" to Tool Bar and click "Done"
    4. Click Advanced->Type->LPD/LPR Host or Printer
    5. URL: lpd//user:[email protected]/EPSON%20Stylus%20CX5600&20Services
    6. Printer Using->Select Printer Software... (EPSON Stylus CX5600 Services)
    I did this and on Lion works fine. But now on Mountain Lion I can install, but I've received the error message
    Do you have any idea?
    Thank's again

  • RM 900 remote doesn't work after driver update

    Hi!
    After solving the proble of? "crackle, pops and noise" with a driver update for Audigy Platinum Ex, I see that my remote is no longer working, i've try reinstalling Remote Center from original drivers and applications CD and after a Volume Up or Down the Rear Left Speaker gives me no sound.
    I've seen in others threads in the forum and they say about installing Media Source, but after installing it still doesn't work.
    Any clue how to make it work again?
    Using Windows XP SP3 and Audigy Platinum Ex.
    Thank you again in advance.
    PD: Excuse my poor english, it's not my nati've language.

    Hello Jashue67,
    Sorry to hear about all the trouble with the Apple TV.  It sounds like you have done a restore but need to pair your Apple TV remote at this point.  You can follow these steps to pair the remote:
    Or, you can press and hold the Menu and Next/Fast-forward buttons on the white Apple Remote, or hold the Menu and right buttons on the aluminum Apple Remote, for 6 seconds to pair.
    You can find the full article here:
    Apple TV: Pairing and unpairing the Apple Remote
    http://support.apple.com/kb/ht1555
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • N73: restore doesn't work after firmware update

    Hello!
    I just made a firmware update to my N73 with NSU, and the procedure completed with no errors.
    Just before the update I made a backup with the application in the phone menu; the app wrote a backup.arc file in the MMC.
    After the update I tried to restore the backup via the same app.
    Here's the problem: the app seems to work (but the "restore" lasts just 1-2 seconds), the phone reboots, but nothing is restored.
    Googleing aroung I found a solution: buy the Noki 1.7 software, extract SMS, contacts and files from the backup.arc, and put everything back on the phone...
    Is there another solution that doesn't involve buying this 3rd party software?
    TIA

    The phone is working well...
    I have been searching in internet, and there'a a lot of people with the same problem. Everybody tells to use PC Suite to backup... if I only knew before.

  • Internal camera doesn't work after Firmware Update

    Hi everybody,
    I had some troubles after updating the Firmware to version 1.1 on my MacBook (the black model). Since the update my camera (the one mounted on top of the screen) doesn't work any longer (it keeps capturing a plain green picture) and the led near the camera is always lighted. Is there anyone who had the same problem? Any idea to solve it?
    thanks
    MacBook   Mac OS X (10.4.8)  

    Hi,
    problem solved restarting with OptAlt+PR

  • Ipod doesn't work after firmware update

    I have an old ipod and I tried to update the firmware. After the update It did'n work. ON the Ipod screen it appear like a plug indicating to charge it, but I charged it several times and the result is the same.
    Now i'm trying to recover it again but my computer doesn't recognize it.
    ¿Is there anything I can do?
    Thanks in advance.
    Jse

    The best place to look for help first is Genuine Apple help directly from Apple.
    Read the iPod Touch Users Guide.
    http://support.apple.com/manuals/#ipodtouch
    Also start with the basics from Apple.
    1. *Restart iPod touch:* Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    If you can’t turn off iPod touch or if the problem continues, you may need to reset iPod touch. A reset should be done only if turning iPod touch off and on doesn’t resolve the problem.
    2. *Reset iPod touch:* Press and hold both the On/Off Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
    For more troubleshooting suggestions, see Appendix B, “Support and Other Information,” on page 214.
    And More..........

Maybe you are looking for

  • Weekly Manual Backup

    I did a 1st backup, a complete backup, to a new external hard drive. Then I turned off Time Machine. If I backup manually once each week what will be backed up? Thanks in advance, Alan

  • Why can't I sign in to eprint?

    I can't sign in to eprint.  When I hit sign in nothing at all happens.

  • How to downgrade quicktime 10 to 7 ? to quicklook midi file

    with snow leopar (quicktime 7) we can quicklook midi file, but in mavericks (quicktime 10) i can't quicklook midi file.. so how to downgrade quicktime 10 to 7 on mavericks? please help me or can you show me how to quicklook midi file in mavericks?

  • Query to get list of linked server tables referenced inside a stored procedure

    Hi, SQL Server 2005 sp4 I have a requirement to get list of linked server tables referenced insider a stored procedure Ex: Databases       DB1          DB2 Tables:            T1             T2                             Use DB1 Go Create proc P1 beg

  • Quotation Messages:

    Hello friends, My problem is while raising the sales order I am not getting the Quotation Message pop up. I have already checked in VOV8, for my order type OR the quotation messages has got A , I have also tried with B alternatively but not getting t