Why 4.0 won't auto login on Norton security suite? still using 3.6..

Hello fellow fans of Firefox, I am having a problem with 4.0 when I try to use the identity safe feature in Norton. It will not auto-fill in my set-up password accounts...I have a online business and use multiple sites that have strong passwords and the auto-fill feature saves me lot of time. I switched back to a 3.6... version and it works with Norton fine.

Some screen captures relating to my question above.
First to show that the response to Tools-Options-Security-Saved passwords is a blank drop-down list as I said in my previous post.
( So unfortunately I can't use Airmail's advice in https://kb.wisc.edu/page.php?id=19006 ) BTW - thanks Airmail .
Second capture is the effect of trying to recreate one of the deleted accounts. ( I deleted the account to try to re-enter the password.)
On this capture note the "password OK" message indicating that the remote email server has accepted the password as correct.
Also note on this capture that "Done" is greyed out and if I try to proceed TB says that the account already exists.
So there seems to be no way of re-entering a password.
I've also noticed that about the time of the failure Trusteer Rapport blocked Thunderbird from taking a screen capture while I was using Firefox to access a banking site. ( Screen Cap 3) I'm not sure why Thunderbird should want to do a screen capture. I've posted another question related to this.

Similar Messages

Why doesn't creative cloud auto login anymore?

I used to automatically login to creative cloud every time I booted my computer. Now it prompts me to login even if I am not using an Adobe product. I have looked for a setting to toggle but have not seen one.
Running CC 1.9.1.474
Windows 8.1 fully updated
I also have a Mac running updated Yosemite and don't have this problem on that side, just in Windows.

Hear hear!
Would like to use InCopy with our CC subscription but until it becomes part of CC we'll use the excellent Em Software DocsFlow for Google Docs.
Adobe, you're not going to get any usage stats for InCopy until you make it part of CC.
Regards, Pete

Why does Apple now force users to provide 3 security questions or use their ridiculous two step verification in order to download from the App Store?

This is a total pain in the ***. I've been using ios products since the launch of the iPhone 4 and they've suddenly changed to this nonsense?   Why does Apple treat its users like they're 4 years old?

Those things are nothing new. People were doing that three years ago and Apple felt their security was sufficient then.   I don't have a credit card on file so I'm not worried about anyone getting my credit card info.
I have sent my feedback to Apple.   Their response included "this is policy. There is no way around the security measures." and "I have provided Apple's answer. There is no further escalation point or anyone I can transfer you to that is going to provide a different answer at this time."

Why are icons disappearing from my dock even tho I can still use the location to open the app

How do I keep icons from disappearing from my dock - even tho I can click on the emptied location and open the "ghost" application?

That sounds off. I would right click on the icon/space in the dock and click options>remove from dock. Then drag the application from the apps folder in finder to the dock again and see if it stays.
Ryan

You state that Norton Toolbar 4.6 will be disabled if i update to Firefox4.01; why and will this be a problem re Norton Security?

Message appered when i started to download Firefox 4.01.
Is there an incompatiblity with Norton?
System: Dell with Windows XP

Yeah, that's a possibility but after the responses from the Apple locations and the guarantee that my model will be available for purchase at FCFS, I don't think I'll have much to do with Verizon locations regards it all.
I think the reason you're receiving yours on Friday is you are east coast whereas I am west coast. I think there was some truth to the Fifth Contact's response and that it also depends on the warehouse the order is coming from. My warehouse is more than likely different than yours and probably has a larger demand/smaller supply than your warehouse.
I live in Southern California, and my county alone has 3.1M people. The four surrounding counties have 10M people, 2.3M people, 2.1M people, and 3.2M people. iPhone is king out here as far as phones, so I'm chalking it up to supply/demand in my warehouse, and that my order was processed much later than many others in my area.
I'll check back on my order tomorrow and Thursday, but unless I have a notice that shows it going out for delivery on Friday by being at my local FedEx facility, I'm going to an Apple store, getting a phone there, and cancelling my order with Verizon.

Auto login and password problems with Safari after OS 7.0.4 update?

Hi all,
I updated my IPad 4 to OS 7.0.4 , now Safari won't auto login to my favorite forums and won't remember my user names or pass words. I checked in Safari settings and Names/passwords and auto fill are on. Have restarted a number of times but no change. Any fixes?
Thanks.

Make sure Private Browsing is off.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.
http://i1224.photobucket.com/albums/ee374/Diavonex/547958b4a8c01ac084dd6649e8386 a0f_zps12fa0cca.jpg

[SOLVED] Wifi won't auto connect on boot - systemd issue?

I'm using netcfg and have a working profile for a WPA wireless network. Connecting using netcfg from the terminal works reliably.
However, I can't get automatic wifi connection at boot to work. I've followed the wiki instructions on the netcfg page, but some thing isn't quite right.
Last in the post is the output from:
$ systemctl status net-auto-wireless.service
Could this be some kind of timing / starting order issue with systemd and the network-related services?
Any ideas anyone?
net-auto-wireless.service - Provides automatic netcfg wireless connection
Loaded: loaded (/usr/lib/systemd/system/net-auto-wireless.service; enabled)
Active: active (running) since Sat, 2013-01-12 20:32:01 CET; 1min 39s ago
Process: 1142 ExecStart=/usr/bin/netcfg-wpa_actiond $WIRELESS_INTERFACE (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/net-auto-wireless.service
â””â”€1323 /usr/sbin/wpa_actiond -p /run/wpa_supplicant -i wlan...
Jan 12 20:32:00 carbon systemd[1]: Starting Provides automatic netcfg wireless connection...
Jan 12 20:32:00 carbon netcfg-wpa_actiond[1142]: catland
Jan 12 20:32:01 carbon wpa_actiond[1323]: Starting wpa_actiond session for interface 'wlan0'
Jan 12 20:32:01 carbon systemd[1]: Started Provides automatic netcfg wireless connection.
Jan 12 20:32:04 carbon wpa_actiond[1323]: Interface 'wlan0' connected to network 'CATLAND'
Jan 12 20:32:04 carbon dhcpcd[1402]: version 5.6.4 starting
Jan 12 20:32:04 carbon dhcpcd[1402]: wlan0: sending IPv6 Router Solicitation
Jan 12 20:32:04 carbon dhcpcd[1402]: wlan0: sendmsg: Cannot assign requested address
Jan 12 20:32:04 carbon dhcpcd[1402]: wlan0: broadcasting for a lease
Jan 12 20:32:08 carbon dhcpcd[1402]: wlan0: send_raw_packet: Network is down
Jan 12 20:32:08 carbon dhcpcd[1402]: wlan0: sending IPv6 Router Solicitation
Jan 12 20:32:08 carbon dhcpcd[1402]: wlan0: sendmsg: Network is unreachable
Jan 12 20:32:12 carbon dhcpcd[1402]: wlan0: sending IPv6 Router Solicitation
Jan 12 20:32:12 carbon dhcpcd[1402]: wlan0: sendmsg: Network is unreachable
Last edited by 4ZM (2013-01-14 08:16:17)

For posterity: the problem seems to be that I hadn't enabled netcfg@<networkprofile>.service with systemd. I had only enabled my wired profile. I.e. doing 'systemctl enable [email protected]' fixed it.
In short this was a failure to configure netcfg startup with systemd. But hey, that makes it (drum roll...) a sysytemd issue! Like most of the problems one encounters while setting up a computer; it is a configuration issue (i.e. PEBKAC). But hey, thats what the forums are for.
@Trilby, @WonderWoofy Thank you both for your insightful, constructive and, above all, helpful comments. I hope everyone else coming to this thread for information on why their wifi won't start will find them every bit as useful as I did.

Problems joining Wi-Fi networks that require viewing a redirect page in iOS 8.1.1? Check your "Auto-Login" setting.

Are you having problems joining previously used Wi-Fi networks that require you to view a login or redirect page (say to accept Terms of Use) first? The problem could be your Auto-Login Wi-Fi network setting.
I found numerous cases where I could not access in-store Wi-Fi networks (Nordstrom was one), hotel networks or in fact networks where you had to first view a Terms and Conditions page or where you had to login via a web form.
These were all networks I had used before.
This appears to be due to the "Auto-Login" setting assuming that once you (re)join a previously known network you can just go ahead and use it without further action. When the iOS device receives an error trying to use the network, it silently drops the Wi-Fi association.
If this is happening to you, follow these steps:
1) Go to Settings -> Wi-Fi
2) Select the network you want to join
3) When a check-mark appears next to the SSID, press the "i" button on the right hand side
4) Set Auto-Join however you want, but shut off the Auto-Login switch
5) Now attempt to use the network and you should be presented with the usual redirect page with terms you must accept or where you must login to use the Wi-Fi network in question
This cleared up the issue for me everywhere I had previously been having issues.

Just let me get one thing straight...you don't change don't do this for the PC you have your router plugged in to?
"For Vista:
1. Open Control Panel, Network and Internet, Network and Sharing Center, Manage Network Connections
2. If Wireless, Right click on your Wireless Network Connection, otherwise, Right click on Local Area Connection and click Properties
3. Highlight Internet Protocol Version 4(TCP/IPv4)
4. Click Properties
5. Tick Use the Following IP Address and enter the IP you want to use for that PC. I would start at 192.168.0.100(D-Link) and work your way up on each additional device. The second device would be 192.168.0.101, the 3rd, 192.168.0.102 and so on. Like I said, different brands of routers use different IP's, so it could be 192.168.1.100 and so on, so you will need to know the IP address of your router first.
6. Subnet Mask is 255.255.255.0 on all pc's and devices
7. Default Gateway is 192.168.0.1(D-Link) or whatever your router's IP is on all pc's and devices
8. Tick Use the Following DNS Server Address and enter 192.168.0.1(D-Link) or whatever your router's IP is and click OK.
9. You will need to do this on all Vista Pc's"

Help required on configuring Auto Login...!

Hi All,
I'm using SUn ONE Webserver Service Pack 9. And once after starting my Web Server instance and when ever I invoke my application url (http://localhost:8080/) It automatically takes me inside the application. I need to remove this auto login configuration. Because whenever I use Logout and login using some other user_id. It still logs in as the same Auto login user name.
Kindly help me.
Thanks in advance.
SAM

Hi,
I resolved the problem. It was too some more properties files which needs to be added to the app.
Cheers
SS

Auto-login broken?

I had auto-login enabled for some time, but suddenly I'm being asked to enter details on each visit to the forums. The auto-login options in My Settings still say, "You can turn off auto-login ...". If I choose to turn it off I get a success message which also says, "To re-enable auto-login, check Remember Password the next time you log in." Trouble is that this option does not appear on my next visit. So it seems that the system still regards me as on auto-login but it isn't doing it.
I can set my computer to remember details, but prefer to enter the site automatically. Is there a general fault, or is it just me?
You can click the white star next to this message if you think it was helpful.

Hi pottyperson,
The reason this is happening is because the login box on front page does not have a remember me tick box anymore. You may have cleared cookies etc which mean settings to be ‘remembered’ were changed.
The only way to set this back up now is to log in via the login page which can be accessed via the link in KerryG's post here; http://community.bt.com/t5/Forum-Guidance-Ideas/Community-Login/td-p/268959
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Security suite 21.7.0.11 won't scan

Comcast Norton Security Suite version 21.7.0.11 won't scan

Sorry for the trouble. Which operating system do you use? What exactly happens when you try to scan? Does it give any error? Did you try to run LiveUpdate & restart the computer? If the problem persists after restart, try to run a scan with the free Norton Power Eraser tool first: http://www.norton.com/npe and check if the scan detects any threats. Then restart the computer again and run a scan with your Norton product.
Harry
Norton Support

IMac is asking for admin login password upon startup when it never did before, settings are still on auto login. Why is it doing this out of the blue?

iMac is asking for admin login password upon startup when it never did before, settings are still on auto login. Why is it doing this out of the blue?

Is sounds like it might for some reason booting into Safe Mode, which does prompt for a password.
Try a PRAM reset:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
If that doesn't help, restart holding down the option key which should take you to the startup manager. Select Macintosh HD (you may need to use the arrows on the keyboard if the kb is Bluetooth), tap 'enter'. Does it boot normally now?

MDT 2012 Update 1 - Deployment - Auto Login won't Disable

Hello,
I am using MDT 2012 Update 1 with an almost vanilla Windows 8.1 and Windows 7 test box. I can deploy both images fine and get a success on my summary but both machines continue to auto login to the Administrator account. To my understanding, the Auto Login
should be shutoff via the LTIcleanup script. When I double check the script for the reg keys that are added/deleted I can confirm that this is happening but the images still continue to auto login to the admin account.
Anyone have any ideas?

Thought I would let those who are interested know. After speaking with Microsoft Premier Support they determined that you must have a password on the Administrator account. If you don't then something goofs up and causes the auto logon issues that I was
having.

Auto logins on websites no longer working

I recently (a couple days ago) got a pop-up on the lower part of my screen that said that firefox was going kind of slowly or something along those lines and said if I would like to fix this that I could click this button. Well I did that and it took me to a page that talked about resetting firefox to its default settings but that all info pretty much would be kept correct like my passwords, bookmarks, addons, and other things like that. Well I said what the heck and tried it and when it was finally done doing what ever it was doing I get back online with none of my opening tabs aloud to be there so that was wiped out, my book marks were there so that was good, but all of my addons like X-notifier and things like that were now gone, and when I go to pages now it has no idea who I am. My user names don't show up or the passwords. I can login to them and it might be fine for 5-10 minutes but then all of a sudden it tells me that I need to login all over again. Even my X-notifier does it and its supposed to know my login permanently so I never have to type it in. But I can be in the middle of sorting my emails and trying to delete something get a message that says I am no longer signed in to my email account.
I have searched all over in the tools>options area and made sure everything is the same as it used to be with saving passwords and even scrolled through my stuff saved to see if something had gotten deleted but they are all there and I see no reason why it would not log me in to the ANY site. I know some of the sites out there don't like to allow auto login stuff which I am fine with but some of these websites I am the owner of and I know for a fact that its not my site doing it. The repeated login issue is really getting on my nerves cause its started to disturb my daily working. Please help me with figuring this out.
Thanks
Troy

I am going to try the stuff mentioned by you above and see if it helps. I know its affecting this site as well and isn't keeping logged in at all as I have had to re-type my password each time I come here.

Background auto-login at boot

I have a G5 running Leopard that I'm using as a print server. I would like to set it up to automatically login into a certain account when it boots up—to start up my printer RIP—but I'd like to hide that boot process from any users who happen to be around at the time. Assuming I have fast user switching enabled, is there a way to script a login as a background boot process?

I'm not quite sure what you're asking. Here's what I think you mean:
-you want your computer to auto-login to a certain account on boot--see Sys Prefs -> Accounts -> Login Options
-you want to start a process at boot -- try using Lingon (http://sourceforge.net/projects/lingon/files/)
-you want to hide the existence of the process you started from anyone who might be poking around in Activity Monitor/top/ps -- 1) you can't; 2) why would you want to?
-you want to be able to use fast user switching and still have your process running -- set up your job in Lingon as a "System Daemon"
Is that what you mean? Please ask if you meant something else.
ddr

Why 4.0 won't auto login on Norton security suite? still using 3.6..

Similar Messages

Maybe you are looking for