Why 4s camera back light always deems On? Is this hardware fault?

My phone have camera back light always ON with deem light since i purchase.... i was told this is not normal and i saw others 4S have no deem light. Is this some SW or HW issue? Anyone can help would be much appreciated.

Thought I may as well post some additional photos consisting of my iPad compared to my sisters iPad 4;
Mine is the top iPad, sisters is the bottom iPad.
Close-up of my sisters iPad, same side;
The camera doesn't capture the full glory of the back-light bleeding, you can just imagine how much worse and more apparent it would be to the human eye!
(With these images, I have enchanced the brightness so it's more apparent)

Similar Messages

Why does the back light on my Tour keep going in and out?

All of a sudden (over the 4 or 5 days) my battery is draining very quickly. I take my phone off the charger at 8:30am and by the time I am driving home from work @ 5:00pm the battery is completely dead.
I also just noticed that there is something wrong with the back light dimming.
You know how if you don't touch your phone for a long period of time (mine automatically locks) then the back light dims slowly to black. My phone doesn't light up again until you touch a button or do something to the phone.
Since I have been having battery problems I noticed that after prolonged none use my phone dims to black and then immediately lights back up again on its own. And it continuously does this all day long, which is why I think it is killing my battery.
Anyone know why this is happening? I tried turning the phone off for awhile and then back on....nothing seems to help.
Help!
Solved!
Go to Solution.

Try going through a clean application load of the BlackBerry Software. To do this see the link below:
How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Manager for Windows - KB11320
http://www.blackberry.com/btsc/KB11320
Be sure to backup your device before performing this application load. Also be sure to test before restoring any data.
Hope this helps.

I cant open my iphone 3g after updating its ios. i try to restore my device but it always encounter unknown error that's why it cam back to the point when i open my phone i always see the itunes icons and usb device icons. and it already stock there.

help me guys please. who know any effective solution for this problem?

thank yo. i already did that but after that it says error occur so the restoring is becoming failed and go back to connect it to itunes huhu. i was so freaking sad about it. i'm trying to fix it and yet it cant

B300 IdeaCentre camera indicator light always on

hi, just wanted to know if it's normal that even if the integrated camera is not in use, the light indicator beside it is constantly on?
thanks.

Hi aq950077, and welcome to the Lenovo User Community!
The light should only be on when the camera is in use. Are you sure there isn't some software running which accesses the camera?
I don't work for Lenovo. I'm a crazy volunteer!

The Back light on 9790 staying & draining the battery

I have a 9790 that the back light constantly stays on and this is draining my battery. the issue is resolved when I do a battery pull. But it happens within a few days again. I need a permanent fix for this is the 2nd device that have that issue
Junior Checkley
Founder & Ceo
Just Cool Services

Well, be nice, I didn't say it would help, I asked ONLY what your setting was set to, didn't I?
You didn't answer.
And another question if you can answer...
What all apps do you hve installed on the device? Options > Device > Applications.
etc and so on.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do I turn off my built in camera (green light)? It's always on.

How do I turn off my built in camera (green light)? It's always on.

That's my next move. Just read about other people having the same issue & turning it off (not re-starting) & waiting a few minutes before turning it back on has worked for some & not for others...
Wish me luck.

Lumia 1520 back light soft touch buttons always on after denim update

Hello i have installed dev prew in my lumia 1520 but no demin update was found, so i unistalled it then the update appeared. But now after the update my light sensor Works differently is less reactive and the back light of soft touch buttons is always
in also during battery save mode. Can you help me? Thanks

Hi, Damodred. For the best experience with the Lumia 1520 touch screen, we encourage you to set the touch sensitivity to normal. This can be done in the touch section of the phone's settings. To do this, go to Settings > Touch > Touch sensitivity > Normal. About the second concern, are you using the headphone that came with it? Does it happen regardless of the headphone that you are using?
We'll wait for you reply.

Why does the top button always brake why as my screen decided to pop off why is the back of my case bending when I have never dropped it why dose this shity phone keep sending text messages as picture messages this is the worst phone av ever had!!

Why does the top button always brake why as my screen decided to pop off why is the back of my case bending when I have never dropped it why dose this shity phone keep sending text messages as picture messages this is the worst phone av ever had!!

I know a lot of people with iphone 5 and have never heard them complain about top button always brake and screen that decides to pop off or the back of their case is bending.
That sounds like a phone that has been dropped a numerous times.

The sound on my ipad 3 suddenly stopped working i dont know why i tried the last two days to fix it and also restored it and the sound never came back, please help.....

the sound on my ipad 3 suddenly stopped working i dont know why i tried the last two days to fix it and also restored it and the sound never came back, please help.....

Do you get sound on any apps e.g. Music and Videos but not others ? If you do then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

I have a mac osx tiger. The camera light is not showing on. Can no longer receive or send video feed for skype calls. How can I get my camera back to working? Thanks Madhu

I have a mac os x tiger. The camera light is not showing as on. I can no longer receive or send video feed. How can I set my camera back to on?
Thanks Madhu

Troubleshooting the iSight camera:
http://support.apple.com/kb/HT2090
and
http://support.apple.com/kb/HT2090

Does anyone know why when printing from light room to pdf the program just closes on me? I've talked to tech support and they are going to get back to me tomorrow but I am desperate I have tuns of homework to finish !!

Does anyone know why when printing from light room to pdf the program just closes on me? I've talked to tech support and they are going to get back to me tomorrow but I am desperate I have tuns of homework to finish !!

No, but if you really mean that the way you said it, I don't know that Print is the best way to this. If you haven't already, after selecting the images you want to get printed, try clicking the Export button in Book or Library module and then selecting format .PDF. Once you export the file to .PDF, try opening it where you saved it and printing from there, not in Lightroom but in Adobe Reader. If that doesn't help, here are a couple of videos that might--follow their instructions carefully with no shortcuts:
Adobe Photoshop Lightroom 4's Export to PDF Using the New Book Module - YouTube
Lightroom 5 - Exporting Images | Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV
If Lightroom keeps closing even when you try all this, you may need to reinstall Lightroom because your copy may be screwed up.

I had my iod 5th generation in the room and then i disconnected it cause it finished charguing and after i left the room to leave my shirt i came back and got my ipod and i coulnd't turn it on anymore. Why?

I had my iPod 5th generation in the room and then i disconnected it cause it finished charging and after i left the room to leave my shirt i came back and got my iPod and i couldn't turn it on anymore. Why?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I left my macbook pro closed and when I came back the screen had a huge crack all over the screen, anyone know why this could have happened?

I left my macbook pro closed and when I came back the screen had a huge crack all over the screen, anyone know why this could have happened?

Someone dropped something onto your computer.
Someone pressed on the closed computer.
Someone placed heavy objects on your computer.
We can only guess since the someone was not us and we were not there when it happened.

Why an I losing contact with Firewire drives and camera back?

One of my computers suddenly won't connect to a Phase One digital back via firewire.
Tried to plug in a external drive to check the port. No contact. (Tried various cables, etc.)
Tried camera on another computer. No contact. Tried firewire drives that had been running before on this same computer, and now it won't read these drives.
My PhaseOne dealer assures me that a digital back can't possible fry or disable a port. Still. there they are.
Took one of these drives to yet another computer that connects fine with yet another drive, tried the problem drive, and there was no connection. When I checked About This Mac there was a spinning wheel, as though it were looking for something.
Any thoughts, anyone? I don't want to test more drives if they are being damaged. And if they are, can they be recovered?
Many thanks
Sean Kernan

Hi, John.
1. I presume in Finder Preferences, in the General tab, you've selected "CDs, DVDs, and iPods" under "Show on desktop." Otherwise, FireWire drives won't display on the desktop, but they should still appear in the Finder's Sidebar.
2. If you did not Eject the drive before you disconnected it or powered it off, its partition map may be corrupted. That could explain the symptoms you are seeing. Your FireWire-based digital camera back may be seen as a FireWire drive.
Disconnecting a removable storage device — FireWire drive, USB drive, etc. — without first ejecting it can result in the drive's partition map being corrupted. Before disconnecting such a device, one must first Eject it by either:
- Dragging its icon to the Trash.
- Control-clicking the drive's icon and selecting Eject from its contextual menu.
- In Disk Utility, selecting the device, then selecting Eject in the Disk Utility toolbar.
If there's data on the drive you wish to recover, see my "Data Recovery" FAQ. Once you recover the data you want to save, if any, you will need to repartition and reformat the drive.
3. Before you panic w.r.t. item 2 above, Here is some general troubleshooting advice w.r.t. FireWire devices that may help:(1) Review the AppleCare Knowledge Base document "What to do if your computer won't recognize a FireWire device".
(2) If this problem occurred after installing a recent Mac OS X Update, and you are also unable to mount CDs, DVDs, or disk images perform the steps in this Mac OS X Hints article.
(3) The following additional steps will often help resolve problems with FireWire devices, particularly hard drives:(a) Power-on the FireWire drive before starting up (booting) your Mac.
(b) Reset PRAM and NVRAM.
(c) Reset the PMU or SMU: Select the appropriate knowledge base item for your model of Mac from this KB search. Follow the instructions on resetting the PMU or SMU carefully!
(d) Try a different FireWire port. James Wiebe, CEO of WiebeTech, has published FireWire Port Failures in Host Computers and Peripheral Devices, a white paper providing backgroud information and technical analysis concerning the causes of failure for FireWire ports. This may provide additional diagnostic information.
(e) Check with the manufacturer of your FireWire drive or enclosure to see if any firware updates are available for such.(4) Hopefully, the partition map on the FireWire drive is not damaged. If it still refuses to mount, you may need to employ data recovery tools or services: see my "Data Recovery" FAQ.Note that some of the information above is from the "FireWire Problems" chapter of my book, Troubleshooting Mac® OS X.
PS: You've not provided any info about the computer in question, i.e. Mac model, installed RAM, installed version of Mac OS X, etc. That's always important to include in a post, and I suggest you add it to your profile: click "My Settings" in the upper-right section of the sidebar on the right side of this page.
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is always talking. How do I make her voice go away and my IPAD work like it should.

The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is talking. How do I make the voice stop and my IPAD work again.

If you've turned VoiceOver on then see if triple-clicking the home button turns it off, and then change what Settings > General > Accessibility > Triple-Click Home is set to.
Otherwise, via 'the touch to select double-tap to activate' process you need to go into Settings > General > Accessibility > VoiceOver and turn it off
The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither

Why 4s camera back light always deems On? Is this hardware fault?

Similar Messages

Maybe you are looking for