Why a MacBook Pro buyer has not the chance to by the Mac with a NVIDIA card
Dear mac lovers,
I wonder why we have not the chance to buy a MacBook Pro with a NVIDIA Graphic card?
I guess it's down to deals, money and handshakes. The same reason PC manufactures use a specific graphics brand. There are very few that give the option (notebooks anyway).
Just to add i understood your question perfectly and I'm sure your level of written/spoken English is far better than other posters level of German
s
Message was edited by: simonf66
because my grammer is sh1te sometimes
Similar Messages
-
I cannot sync contacts between my iPhone 4s and MacBook Pro after I upgraded the Mac with the latest operating system software upgrade. Even the Mac Store couldn't help...
That is because that sync ability (for contacts and calendars) has been removed. Use iCloud instead.
-
My macbook pro laptop does not have a cd disk drive on it. I received photoshop lightroom 4 when i purchased my samsung camera. It comes with the cd and serial number however, i cannot put the cd in my laptop considering it does not have a disk drive. how can i download this another way?
Download from Adobe
Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 4.4.1
Install then enter your serial number. -
HT204032 Why isnt macbook pro 13 in not added?
I wanted to use power nap on my 2012 macbook pro 13 in, but it isnt supported. If anyone has any answers, please tell me.
It requires flash storage, and the Mid 2011 or later MacBook Air and the MacBook Pro with Retina display have got that
-
I rented a movie on itunes on my Macbook Pro. It took off the fee for rental from my gift card balance but NO Movie! Where is it. Not in Library...
Did you let the rental fully download before trying to watch it.
-
Why does macbook pro heats up around the left side and CD spines wildly?
I am experience heat from under the body of the computer on the left side. And also when the CD is in the drive, it runs really fast and loud. Does anyone have any reasoning for these concerns of mine? Mainly I am concerned about the over heating of the computer near the left side.
Hi,
I set my MBP up by transferring everything from my iMac (also an Intel Core Duo model). One piece of shareware, Net Monitor, didn't like something (partly, perhaps, the fact that it detected a single license key shared by two computers on the same network) and though it told me about this (duplicate license key) and allowed me to go on using it in demo mode, it ended up soaking up CPU. I didn't notice this right away, but I had the MacBook on my lap (and was wearing shorts) and after a while, the bottom got very hot. Then I noticed the CPU was pegged. Using the Apple "Activity Monitor" I was able to see which process was the culprit and kill it.
Anyway, a single run-away process like this can use up a lot of CPU and hence a lot of battery power. Use the Activity Monitor to check for such a process. There's a nice feature in Activity monitor, a floating CPU utilization bar. I keep it showing down in the lower right corner so I can notice if something like this happens again.
Randall Schulz
iMac 20" Core Duo; MacBook Pro Mac OS X (10.4.5) -
Brand new macbook pro - iTunes does not recognize multiple speakers, my older macs work correctly
New macbook pro with iTunes 10.5.2. OS 10.7.2 Setting up iTunes.
Two speakers on Airport devices.
Switch at bottom right shows all of the speakers above the line, and "multiple speakers" below the line. The two speakers on the airport devices are #3 and #4 on the list above the line. (i.e. ITunes is aware that these airport speakers exist).
I can click on single airport speakers above the line, and ITunes connects.
When I click on "multiple speakers", I get "computer" and the first listing which is a printer hooked up on an airport express link. Also get the separate volume controls etc. The third and fourth entries on the list (i.e. the airport speakers) are not displayed on the multiple speakers list.
So I can connect to one speaker at a time, e.g. the computer, or any other speaker, but I cannot connect to multiple speakers.
I have two other macs and have never had this problem with hooking up to the multiple speakers.
Thanks for any help.Same here - the problem is - it was working for a few days after I've upgraded iTunes to version 10, and then yesterday - I've rent the movie from Apple Store and once downloaded with iTunes - I wanted to transfer it to my ATV - however - my link to ATV suddently disappeared. What a piece of Crap. I can't describe my frustration - apple products aren't cheap and they always come with some kind of problem - what the **** is going on - it's not just the design people are looking for but also functional products.
Yesterday I've tried to turn of ATV, remove link from iTunes, start ATV make new connection to iTunes, start up iTunes - ATV shows up, code put in and at this stage I thought it finally works - but hey - forget it - I'm trying to put the purchased rental onto ATV and I get an alert saying that my firewall (which I have none) is stopping me from syncing. I then go to the support page which explains how to deal with it - but on some very old version of the system - my system (Snow Leopard) doesn't have those options any more. So as far I I'm concerned I'm screwed unless they fix the problem with their software.
If you guys know of any possible solution to this problem (and I did read many forum topics already - none of which works) - then please let me know. -
So I got a new hard drive for my early 2009 version Mac Book Pro and some new memory to speed the little guy up. I was trying to copy the Mac and BOOTCAMP partitions onto the new drive, and I am close, but not home free.
Here's what I have done so far:
I got an external cage thing for the new/old HD.
I put the new HD in the cage and cloned the mac and BOOTCAMP partitions to the new disk while booted from a DVD.
I put the new drive in the machine and the old one in the cage.
I booted the machine and it loaded the mac side fine.
When I tried to use the 'option' key to, select the system I wanted to boot into on the reboot, it didn't show me the windows (bootcamp) option.
That's where I am at. When I go into disk utility it shows my BOOTCAMP partition in the list of logical disks under my disk, but it is grayed out. I can mount it, but when I restart, I can't select it. I feel like I am so, so close. What do I need to do?
(BTW, the old drive, the dude I am trying to clone, still exists in its entirety in the cage; I could put it back in and go from there if I had to.)
Let me know what you all think!
-RicardoDo you mean you want to reinstall Leopard? If you want to boot from your Leopard DVD do this:
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading. -
I've already setup the original user account and do not want to do it again, how do I merge the two user accounts into one so all of my stuff is under one user account?
They are the same Itunes account (mine), but since I transferred the 'user account' with my Itunes library and other files from old pc to my new MacBook, I now have two 'user accounts' on my MacBook. The original I setup when I got the MacBook and the one I transferred from my pc. I've already went thru most of my photos in Iphoto and named all the faces along with general setup of how I want all my settings on my MacBook under the first user account, I don't want to start over and do it all again with the transferred user account, I just want to move my Itunes library I transferred over to my original user account on my MacBook. Does this make any sense? lol
-
What is the best mail app for MacBook Pro that is not the req mail app
i am having nothing but issues with the mail app. i use office 365 but cannot sync my contacts to it. so what is a better app to replace it
Go to OWC and purchase a drive and an enclosure. Put it together yourself. Takes about five minutes and a screwdriver. Or you can purchase one already complete from them if you prefer.
-
My iPhoto will not stay running. It opens for a minute and then quits unexpectedly. I get an error message and it says a report will be sent to apple. My computer will not recognize my iPhone either. I cannot figure out how to fix this issue or if there is any way to fix it!
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
If that fails:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line -
Adobe Photoshop CS6 won't load on my macbook pro, says "Could not initialize Photoshop because the file was invalid (it has been deleted).
Tried the preferences, they are not there, tried uninstalling and reinstalling, no love! Any help?
-
The battery for my Macbook Pro 13 "has only 121 cycles and is not charging anymore, my Mac is telling me that it is necessary to exchange it. You have any tips for me to find out what might be happening with my battery?
Guys, i am actually trying using a solution provided by the article shared by dominic23,
It says "Another option is to get an ionizer to help the atmosphere in the workplace be more conductive and pull charges away from contact surfaces, including yourself."
So in my home, we have such device that could clean the air using ion, and i am using it in my room...
Result: BANG!!! The electric shock on my macbook has gone!! I don't really care about physics but somehow it works! You guys should give it a try.
Thanks again dominic23 -
i have a MacBook Pro which has a SSD replacing the superdrive. I have bought an Apple USB superdrive but It's not working when I plug it in? Is it broken or do I need to download something to make it work?
System Requirements
MacBook Pro with Retina display
MacBook Air computer
Mac mini computer
Maybe you are looking for
-
Download to application server File tcode relavance
Hi i need to know the process for application server download and defining the same in file transaction also the process further to move the logical path to the TQA etc system also pls send me working example of the downloading to application server
-
IPhoto Browser option is not showing up in import menu
Hi, The iPhoto Browser option is not showing up in the drop down import menu in my Aperture 3.4.3. What gives? I want to do some targeted photo imports from my iPhoto 9.4.2. Mac Pro, Mac OS X (10.7.5), Aperture 3.4.3
-
Apple Protection Plan Question
Would It be ok to get the apple protection plan on ebay and get it for 150 rather the the 250 from the apple store.. ?
-
Pulling Multiple Approver Names from Workflow Logs for One Work Item
I have a workflow design which requires multiple approvals per single work item. I happen to have another functional design that is also pulling data from those same workflow logs. Assuming I have multiple approvals at various levels for a single w
-
Hi, I'm a bit stuck at the moment with using a button in Flash 8 to launch a new URL in the browser. This is what i've done (after searching the web for answers): - Created my button (yes, it has the proper "button" icon - Selected the button and gon