Why a MOS (Hiden before playing) becomes visible when I pass my finger over for scrolling the page?

What could I do for activate it just with the button? I'd really appreciate your help. I need to publish the magazine this week

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

Similar Messages

Why does "Download this video" keep popping up when there isn't even a video on the page?

I just closed 3 tabs in a row and "Download this video" was on the screen even on the fourth tab until I moved the pointer down onto the page to close it manually, it went out before I got there. Sometimes I have to chase it until I can hit the "x", then it stays off for a while.

Sounds that you have an extension that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

How can I force an "invisible" object to become "visible" when a numeric value is entered?

So I’m trying to force an “invisible” subform to switch to “visible” when a numeric value greater than or equal to 22 is input into a numeric field.
I can’t get the following javascript code to work properly with any event. I’ve tried the change, calculate, validate, events and a few more to no avail. The only event that kind of works with the javascript code I’m using is the validate event. When I input the code into the validateevent, the invisible subform becomes visible when an amount equal to or greater than 22 is entered, but when ANY amount is input into this field, an error message pops up that says “NumericField4 validation failed” and the user has to click “Ok” to get rid of the pop up box.
if (this.rawValue <= 22) {
        Approval23.presence = "hidden";
if (this.rawValue >= 23) {
            Approval23.presence ="visible";
Here’s a link to my .pdf: http://www.filedropper.com/salgovform
The object field that the javascript code is contained in is called: NumericField4 (a.k.a. New Job Grade)
The subform that I want to become visible when a number greater than 22 is input into NumericField4, is called Approval23.
I’ve based the javascript code I used on information I gathered from the following thread and associated .pdf . . .
Thread:
http://forums.adobe.com/message/1982919
PDF in thread with the javascript code:
http://forums.adobe.com/servlet/JiveServlet/download/1981437-8059/Sample_SW.pdf
I’m pretty sure I’m just missing one little thing that’s throwing everything off!
Any help would be GREATLY appreciated.

Hi,
The following works in the exit event of the numeric field, where the language is set to JavaScript:
if (this.rawValue <= 22) {
     Approval23.presence = "hidden";
else {
     Approval23.presence = "visible";
Here is your form: https://acrobat.com/#d=3gRNt6WBY2bE0K7en4CnSA
Hope that helps,
Niall

When i swipe my finger to delete messages, the "delete" option disappears in no time before I tap delete. Help?

When i swipe my finger to delete messages, the "delete" option disappears in no time before I tap delete. Help?
Also, my battery died after like 4 hours of a full charge.
This is a brand new phone .. HELLPP!!!

Try to reset the phone by holding the sleep and home button until the Apple logo comes back again. This usually takes care of glitches. You will not lose data resetting the phone that way.
As for the battery drain, if you're using push/fetch for your mail, try to delete and set up the mail account again, the have been cases, in which the mail app tried to log into the mail server over and over again, causing the battery drain.

Issue with hidden subforms and fields becoming visible when scrolling

Hi all:
Was testing an XFA form on a 13" macbook air when I noticed something odd: Page 1 (which had a presence of "hidden") became visible on-screen when scrolling down Page 2, which was set to visible. For lack of a better description, Page 1 "bled through" the currently visible page but then disappeared after the scrolling action was complete.
Here was the sequence:
- FYI: 4 pages in the form; only one page is visible at a time. When the document opens, Page 1 is visible and all the others are hidden.
- Opened on a MAC with Reader XI
- Answered questions on Page 1 and clicked a "next" button which set Page1 to hidden and Page 2 to visible;
- I zoomed in for a better view on Page 2 (again Pages 1, 3,4 are all "hidden" at this point)
- When I placed two-fingers on the track pad and scrolled down, the bottom of hidden PAGE 1 was revealed during the scroll, not the bottom of Page 2.
- When I lifted my fingers OFF the track pad, the bottom portion of Page 1 that became visible while scrolling disappeared and was replaced by the bottom of Page 2.
Same thing happened with pages 3 & 4. If I zoom in and scroll up, down, left or right using the track pad, Page 1 (even though it is set to hidden) "bleeds through" during the scroll and then disappears when fingers are lifted off the track pad.
I've done some testing and it happens on Macs running Reader. Mac with Acrobat and PCs with either Acrobat or Reader appear to be fine but not finished testing.
Made a simple working example. Again, be sure to open on a Mac with Reader if you want to see it happen. https://www.dropbox.com/s/jnf4uxntuzvrk7p/bleed%20through%20tests.pdf?dl=0
Has anyone else experienced this?? How can we stop it from happening as it is extremely confusing to the end-user to have two different pages mixing together when scrolling.
Thanks much.
Brian

Just reaching out to the community again on this. Any thoughts or similar experiences?
FYI, I tested the new Reader DC for this issue yesterday and it's still there. Hidden pages still bleed through.

Why do things print really small from my iPad (it looks like a mini version of the page I am printing), but from my iPhone they print perfectly?

When I print from my iPad the page comes out of the printer with what looks like a miniature version of the page that I printed. But when I print from my iPhone it prints perfectly. Does anyone know why or how I can change my iPad setting so that it prints things full scale?

Campbell10 wrote:
It was quite easy with Microsoft Word
So use MS Word (or LibreOffice… OpenOffice…)
difficult with Apple contacts
Mm, yes, if you mean Address Book. Difficult… but, conceivably, doable.
not possible in pages
Eminently possible in Pages. Get a template (or employ the one used with MS Word) and look up Merge Fields in the Pages user guide.

Why scrolling the pages in adobe reader very slow

hi,
why when i try to scoll the pages with my mouse it move the pages very slowly its like slow motion move
i want to scoll the page smoothly without facing the issue
thank you for help.

so there isn't a solution for slow mouse scolling
and by the way its a lot faster to scroll pages when im using foxit reader

Why Glass Pane becomes visible when resizing JInternalFrame?

This qustion has been asked _*here*_ but got no response.
Hello,
I've created a JFrame with JDesktop and one JInternalFrame on it. I've also added a glasspane (which draws a black circle only) to JFrame - it's invisible by default but when I resize JInternalFrame it shows up.. is this correct behavior? Why it is visible only when I resize and diappears when I release mouse button after resize? How I can make it invisible when resizing JInternalFrame? (Is removing JFrame's glasspane only solution?)import java.awt.Graphics;
import javax.swing.JDesktopPane;
import javax.swing.JFrame;
import javax.swing.JInternalFrame;
import javax.swing.JPanel;
public class RunMe extends JFrame {
     public RunMe() {
          this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          this.setBounds(10, 10, 800, 600);
          JDesktopPane desktop = new JDesktopPane();
          JInternalFrame testJIF = new JInternalFrame("test", true, true, true, true);
          testJIF.setBounds(10, 10, 100, 100);
          desktop.add(testJIF);
          testJIF.setVisible(true);
          this.add(desktop);
          this.setGlassPane(new MyGlassPane());
          this.setVisible(true);
     private class MyGlassPane extends JPanel {
          public MyGlassPane() {
               this.setOpaque(false);
          @Override
          protected void paintComponent(Graphics g) {
               g.fillOval(0, 0, 100, 100);
               super.paintComponent(g);
     public static void main(String[] args) {
          new RunMe();
}

First of all, thank you for being upfront about cross posting.
Whether this is "correct" behavior or not may be debatable, but it's certainly expected behavior. From the source of javax.swing.plaf.basic.BasicInternalFrameUI.BorderListener.mousePressed (towards the end of the method)Container c = frame.getTopLevelAncestor();
if (c instanceof RootPaneContainer) {
   Component glassPane = ((RootPaneContainer)c).getGlassPane();
   glassPane.setVisible(true);
   glassPane.setCursor(s);
}The glass pane is made visible to show the resize cursor.
It's set back to visible(false) in finishMouseReleased() which is invoked from mouseRelease and elsewhere (e;g; from cancelResize which is invoked from windowLostFocus)
Looks like you can't use the glass pane for whatever you had planned, the Swing designers have already used it for something else. Or this could be a workaround, depending on exactly what it is you're trying to do.@Override
protected void paintComponent(Graphics g) {
   super.paintComponent(g);
   if (this.isOpaque()) {
      g.fillOval(0, 0, 100, 100);
}You could also declare and use a boolean flag, rather than using isOpaque (which may happen to be set/reset somewhere else in the Swing code ;-)
db

Why do some songs not play through entirely when they have in the past?

In both iTunes and on my iPhone and iTouch, certain songs that used to play completely now stop with just less than a minute left on them. I checked "Info" on the songs and nothing is set to stop the song before it reaches the end. Any thoughts?

It is from iTunes not the web. The link is a screenshot of what happens in iTunes.

Why does font change suddenly and become bold when replying to email

I really could use some help here.
When I reply to an email, no matter what font I am using, within a few lines it switches to a different font and goes bold. Why does this continue to happen? I tried going to Insert, selecting HTML and placing <style type="text/css"> body {font: 12pt Tahoma;} </style> it works but it has to be done for every email I reply to. Thank you ahead of time.

Oh no, he's talking to himself again. Maybe it's smell of dinner cooking that's throwing him off.
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Why won't my videos play in iTunes when I already downloaded them?

I downloaded an episode to watch along with a few songs....they downloaded on my iPad and now they are showing up in my purchased but its only playing 30 seconds of the episode and the songs won't play at all. Can anyone help?

iTunes on the iPad is just the iTunes store. Videos and tv shows that you've synced and/or downloaded to the iPad go into the Videos app :
Songs that you've synced or downloaded go into the iPod or Music app (depending on which version of iOS you have) :

Why do music videos not play full screen when not in video app on iPad and iPhone? video app is worthless, cannot sort or build playlists.

Is there a way to build video playlist within itunes that will play full screen or landscape? I do not like the video app.

Greetings avilation,
Thanks for participating in the Apple Support Communities.
It sounds like when you stream videos to your iOS devices using Home Sharing, you only get either video or audio.
You can find some troubleshooting steps that may help this situation on this page:
Troubleshooting Home Sharing - Apple Support
I'd recommend starting with Step 4 (Check your network connection) in this guide.
Best Regards,
Jeremy

Why does a b/w JPEG become overexposed when I place a PNG in the same file?

I'm creating a black-and-white ad in InDesign. The background is a JPEG edited in Photoshop (converted to grayscale, cropped, added two black rectangles, one on top, one on bottom with a gradient). I added multiple text boxes and then went to place one of three logos (created and saved in Illustrator as PNG-24) into the file. As soon as I place it anywhere in the document -- on top of the JPEG, four inches away from the JPEG, anywhere -- the JPEG goes to maximum brightness and looks terrible. If I add the logo as a JPEG, everything is fine. The problem is that the logo needs to have a transparent background, which you can only get with a PNG as far as I know. I also tried saving the background JPEG as a PNG, but it comes out similarly overexposed. What do I do??

What you are seeing is the effect of ID's shift to overprint prview quality when transparency is introduced. Grayscales are actually mapped to the black plate, and output as part of the document working CMYK, which may display lighter or darker than the preview of the grayscale. The image should look the same as it does without transparency on the page, but with overprint preview selected, and this is the actual output you can expect when you output to the current CMYK working profile.
You can use the black channel fro the CMYK profile as the gray space when converting to grayscale in photoshop if you want to have the most accurate rendition in both applications.
And if you are creating the logos in Illustrator you shold probably be saving as .ai or PDF, rather than PNG, which is a raster format.

Is it possible to insert a form in a image that only becomes visible when it is clicked?

I am trying to add a basic subscription form to my landing page in dreamweaver. I have an example of it below, and so I am wondering how do I add a submission form to an image that isn't visable half the time?
landing page example: www.kandied.co
Thank you,
Kyle

Hi
The example you provided was created using Edge Animate.
It could also be created in Dw using html and css. The two possibilities using html and css are -
Use css transforms, transitions and animations, (this would give you the same result as when using Edge Animate, but with much less code) this would only work in modern browsers.
Use absolute positioning, z-index and if required a little javascript. This would work across all browsers.
PZ

Why do most of my stacks come ungrouped when I make changes to other files in the same folder?

I have a folder of about 3000 graphics and photos that I use for work. I've meticulously organized them all by using unique file names, keywords, and sorting. However, when I make changes to a set of files (especially using the batch rename tool), a large percentage, even a majority, of the other stacks in the folder come ungrouped.
This has been happening to me for several months, and so far I can't see any type of order or factor that makes certain files come ungrouped. Many times, it's the same files that come ungrouped, but in addition to those, there will be other random stacks that I lose. My stacks are only a few files big (each stack is comprised of the same picture in different file types) and with how many files I have, this has become seriously detrimental to my workflow and efficiency. Anywhere from 20-70 stacks will become ungrouped. I almost always have my files sorted by filename, and when I rename files using batch rename, I give them such similar names that I'd think there would be no reason for the rest of my files to come ungrouped. For example, if there are three files I want to group, I will give them a name like background_001, background_002, and background_003. After I do this, I'll discover that my stacks with names like template_(sequence number) and UI_(sequence number) have come ungrouped. It will do this with pages and pages of stacks at the same time, regardless of how I have the files / stacks sorted. It doesn't happen everytime I rename a batch, either. I just created 10 batches of 3 like-named files each, and after this last batch, about a hundred files came ungrouped.
I understand that doing things like changing the sorting method of files, or renaming a file so that it's thrown in the middle of a stack, will ungroup my stacks. I don't think I'm doing any of these things (I've been trying desperately to make sure I don't change the sorting method of my files or do anything to a file that might have an effect like this). I don't use ratings or color labels in these folders, the only tools I use are batch rename, keywords, and stacks.
Is there any way to preserve my stacks so this stops happening in the future, or I can correct it when it does?

This is my first time posting here, so I'm sorry, I re-read my post several times and honestly did think I provided enough information, but you're right, it wasn't the right kind. So please (continue to) bear with me, I'm really not trying to be ignorant. I honestly assumed the issue was something I was doing wrong in Bridge, nothing to do with my computer specs.
I am using a late-2008 Macbook, running Yosemite 10.1.1 (screenshot below)
On the Mac I am using Bridge CC 6.1.1.115 and Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x64)
Here is a link to the System Info from Photoshop on the Mac
Here is a screenshot of my System Overview on the Mac
Here is a screenshot of my Photoshop performance preferences on the Mac
I am also using a Dell desktop with Windows 8, running Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x32) and Bridge CC 6.1.0.116 x32 (on a separate CC account with separate files that I don't try to sync or anything)
Here is a link to the System Info from Photoshop on the Windows computer.
Here is a screenshot of the system overview on the Windows
Here is a screenshot of my Photoshop Performance preferences on the Windows computer
I work with jpg, psd, ai, svg, and pdf files. Most of my stacks are three different file types of the same image, usually jpg, psd/ai, and pdf.
I have not recieved any error messages
I am not having issues opening raw files, I am not having printing issues, I have listed the troubleshooting steps I have taken.
Is there any information you need that I missed? I'm trying not to be a dingus, but I'll have to ask you to be patient with me in the meantime. I haven't ever looked up half the hardware/software details that were suggested and I don't know how to off the top of my head, so I provided what I already knew how to

Why a MOS (Hiden before playing) becomes visible when I pass my finger over for scrolling the page?

Similar Messages

Maybe you are looking for