Why Actual is 0 in the report S_ALR_87013558?

Dear experts,
i have issure IR with transaction code MIRO, but when i run S_ALR_87013558 ,the actual is 0,can you tell me how to check?
Best Regards,
Merry

Hi Merry,
run help transaction RKACSHOW, input the involved accounting object (WBS or network activity?) and the value type '4 for actual costs. ', check the COSPA and RPSCO (double check).
If there is no record in COSPA, then there is no actual costs at all because of any reason.
If there is record in COSPA, but no record in RPSCO, then the value catatory customizing in PS is not maintained correctly. Please adjust it and run the rebuilding transaction CJEN.
If there is record in COSPA and RPSCO; then in the database layer is O.K. Some problem with display.
KInd regards,
Zhenbo

Similar Messages

Reaminder value from standard report S_ALR_87013558 - Budget/Actual/Commitm

Dear Gurus,
Can you explain me the source of value which is shown as 000.2009 Remainder 2009 ( I seams that 000 stands for period) in the report S_ALR_87013558 - Budget/Actual/Commitmt/Rem.Plan/Assg
Regards
Project Team1

hi
in PS all the Cost reports are read from the Info Database.

Report s_alr_87013558 as at a date

Dear all,
On the report S_ALR_87013558: Execute Budget/Actual/Commitment/Rem.Plan/Assigned Overview, I would like to have the figures in the Actual column as at a date. As it is now, the report is giving me the whole figures from start of year up to current date.
How can I get this?
Thanks for ur help,
Nas

Nelmaz,
Near the execute button their is a another button called Dynamic selection (shift + F4) click on it
there you get a folder called data on dates defination from their double click start date and finish date
than choose your specific date for running above report
If you get anws. plz assign point
thanks
Rink

REPORT S_ALR_87013558 - budget in Controlling area currency not correct

Hi ,
these are the budget column settings :
Key figure          Overall in CAC
Version     0     Plan/Act - Version
Value Type     41     Budget
Object ind.     P     Project item
Debit type     1     Costs and credit-side payments
My case is the following :
Controlling Area Currency : USD
WBS object currency : EUR .
The budget on the wbs is in EUR ; unfortunately the bdg displayed into the report , has a Change rate that i dont' recognize .
E.G. Budget on the wbs 110000 EUR - bdg displayed into report : 120.153,85
If i launch the transaction cj31 i see the bdg , if i select controlling area currency , the bdg in USD >156.200,00.
This value is read from the table BPGE .
Why does the report S_ALR_87013558 don't read it also from there?
thanks and regards

hi
in PS all the Cost reports are read from the Info Database.

Committment item not getting reflected in Report -S_ALR_87013558

Dear ALL,
I've made all the necessary conifg for Committment item ,but still when i create the PR from project and the same is converte to PO ,in the report S_ALR_87013558 - Budget/Actual/Commitment/Rem Plan/Assigned itz not reflecting.
Are there any config to be done.
plz help n guide
itz urgent
Thanks in advance
Manohar

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

Report S_ALR_87013558

Dear Experts,
The user needs to show in the report S_ALR_87013558 the column of the last fiscal year (2009), but it seems that the possible chooses are only for 2010 -2011-2012-2013 and previous exercises (the sum of all previous exercises).
Is there any way by which we can insert the column of last fiscal year?
Thanks and Regards

If you are good at report painter, then you can create new one by copying this report and make changes as required like including an additional column for last year.

Possiblity to expand / narrow / reset all drillstroughable parts of the report with one button

Hi,
has anyone done that bevore? Is this possible ..
I have parts of a big Report, that are expanded (where i can see all detaildata) and parts where the detaildata is there, but arent showed by Standard (are narrowed).
I wish i could have a button, where i can expand / narrow all expandable/narrowable parts of the reports from 1 button.
Why?
1) To print the Report i could press "Expand all" and then print, so i get all the detials of the Report.
2) for a better first look i could Show all expandable reportparts narrowed. Then click expand all to see all Details.
and maybe to reset all expandable parts to the Default (Settings when loaded) there could be a reset button to.
Any Chance?
THX, greets pib

Hi Pe.bo,
Per my understanding that you want to add an button in the report to control the Expand All and Collapse All of the drill down report, right?
I have tested on my local environment and we can do this by creating an parameter to control the show/hide of the details, We can add two radio button image (Radio on, Radio Off)and add the "Go to Report"action on the image which
display most similar to the button and will display the result of Expand All and Collapse All once you click on the radio button.
Step by Step details information in below article for your reference to help you achieve the result:
http://blogs.interfacett.com/how-to-implement-expand-allcollapse-all-for-drill-down-in-sql-ssrs
If you still have any problem, please feel free to ask.
Regards
Vicky Liu

How can I use the report CRMC_ORGMAN_SWITCH_TO_ENH_MODEL

Dear all,
I want to change the CRM organization from stardard version to enhanced version.Acoording to the help document, we must using the report CRMC_ORGMAN_SWITCH_TO_ENH_MODEL.But neither this transaction code nor this program in CRM system.Do you have any suggestion, Thank you very much.
The help document is "http://help.sap.com/saphelp_crm60/helpdata/en/32/4473211b7778428efebc865e351cb4/content.htm"

Hi
Please check if you do have the authorization for transaction
CRMC_SWITCH_ORGMODEL.
Transaction CRMC_SWITCH_ORGMODEL switches the organizational
structure being used in CRM to a new model. This process is irreversible
and therefore an accidental execution of the transaction should be
avoided. This may be the reason why you can not execute the report.
For further details review note 0635401 and the check if following notes
are valid for you.
650001,635339,635182
Hope it can help you.
Best Regards,
ZhaoJie

Costing Segment Values in the report

Hi,
We are using 6 segments in Cost Allocation KFF. Out of these, only 3 are marked as displayed, but all are enabled. I have given values for company and Natural Account at the element link level. At organization level, I entered only cost center. In remaining levels, I didn't enter any values for costing.
I ran costing conc. program and Costing Detail Report. In the report, I could not see entire costing values in debit part. Where as I can see entire segment values at credit part. In debit part, instead of showing 01.101.2035, it is showing 01...
Pl. advice why it is happening in the report.
Thanks in advance.

Hi,
I have given the values in both costing and balancing at the element link level. Like 01.000.12345 for costing and 01.000.6000 for Balancing.
But, in the Costing Detail report, instead of taking costing segments from element link, I could see payroll suspense account segments (defined in Payroll description) in the report.
Note: All primary classifications costings are not appearing.
Thanks
Edited by: user12159693 on Feb 3, 2010 4:40 AM

What is the meaning of Rem.Order Plan in the PS cost report S_ALR_87013558

Hi,
Does anyone know the meaning of "Rem. Order Plan" column in the PS Budget-related cost report-- S_ALR_87013558 Budget\actual\Commitment\Rem.Plan\Assigned? I understand all the other columns like budget, actuals, commitment and assigned, but I have no idea what the "Rem order plan' means?
Thanks,

In this report it is "Planned Cost - (Actual + Commitment)"
Venkat
Edited by: VenkatSrinvas Konda on Oct 16, 2008 8:09 AM

Budget/Actual/Commitment report-S_ALR_87013558

Hello Experts,
Is it possible to get the get this report (S_ALR_87013558) on day basis? I mean to say if i want to see the balances between two particular dates WBS/Project wise, so can i get the same?
Please suggest..
Thanks
Ankur

Hi,
Use CJI3 or go to Call Up report from S_ALR_87013558 and filter the report as per Date.
Regards,
Nitin

Do we have the report to show PO Price and invoice actual price

Dear Guru,
I'm finding the report to show PO Price and Actual Price after invoice.
The actual price is mean that we may have other debit/credit price as subsequent posting in MIRO.
So we would like to compare PO price and actual Price.
Please kindly advice.
Thank you very much.
Best Regards,
Saiya

Hi,
Please check ME81N --> Order value analysis.
SAM
Edited by: Saminathan Gopalan on Jul 22, 2010 6:05 PM

When Starting OC4J, why the report server doesn't start automatically? !!

Dear All,
I have DS 10g on my system and I start the OC4J when I have to run either forms or reports.
But when I attend to start the do the following command from the form:
WEB.SHOWDOCUMENT(..../getjobid<jobid>?server=<servername>...), I have an error: FRM-41213: Unable to connect to the report server <servername>.
I noticed that if I run the following URL:http://<server>:.../reports/rwservlet, it gives me a list of command, but the server still not running..But if I add any command to the above URL like for example "getserverinfo" or "showjobs" then the server is started. Now, and after the command, if we return back and we run the report from the form, the report will run successfully.
The question WHY??
Regards,
Joe
Message was edited by: Joe
Joe Farah

Hello,
That's the way it works ...
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_strt.htm
2.1.3.1 Starting the In-process Server (Windows and UNIX)
If you are using Reports Server as an in-process server (the default configuration), sending a run report request starts the in-process server; however, if you are sending a request through a command line, the servlet must be invoked first using either the run report URL or the Web command URL. When you have successfully started the servlet, this also means you have successfully started the in-process server.
If you use "Oracle Application Server", the "in-process" reports server will be started automatically by opmn ...
Regards

Why can't I actually put widgets on the desktop?

Why can't I actually put widgets on the desktop and have stay on the desktop; not float on top of all my programs so I can’t see what I am doing?
I know there are a few widgets that claim to do this, but they don’t! (Dashit)
Here is the main problem that I have with Dashit; it doesn’t go on the desktop, it floats on top of every program and you can’t make it actually put it on the Desktop! This makes this little widget useless! Why can’t anybody make a widget that actually puts the widgets on the desktop?
What use is it if the darn things just float on top of every program? This just gets in the way. Dose anyone know of a widget or a way to actually put the widgets on the desktop?

Garret, the only way to put Dashboard widgets on the desktop and select the level they live in (so they don't float over everything) is to use either Amnesty Widget Browser or Amnesty Singles. Both are shareware.
Disclaimer: I may receive some form of compensation, financial or otherwise, from my recommendation or link [my company developed Amnesty].

Is there any why to check that the reports are functioning well in Webanaly

Hi Experts,
is there any why to check that the reports are functioning well in Webanalysis?
any Help in this issue ASAP is highly appreciated
Kind Regards,
Vam-c

What do you mean by checking whether they are working?
You can always open the report and see whether everything is working ;)
Regards
Celvin
http://www.orahyplabs.com

Why Actual is 0 in the report S_ALR_87013558?

Similar Messages

Maybe you are looking for