Why Adobe doesn't use the open source codec x264vfw for Elements as .AVI?

Well we all know who wants to work with the x264vfw that it does not work in Premiere Elements.
But i think Adobe could have make it work with the open source x264vfw or with the AVC-Intra coder.
I am still asking me also why it would work when i do re-encode it with another program to h264 again but as MP4?
Adobe does itself make it really easy and messing with us. because they are saying there is support for h264 but only for MP4 and another one...
Why they don't add .AVI support that goes to the support of Adobe because i can't get into the livechat.... because its only under the week....
This Codec the H264 X264 and AVC-1 are the most used codecs today in my opinion so i don't know why they don't sit their Dev's on that.
ALSO that it does not work on their 600$ Application named Premiere Pro is something that i don't understand...
For me its unbelievable if i am honest.
I now want to know why adobe is such a service desert in this point.
They all yelling about that but Adobe does nothing.
If somebody knows a solution without re-encoding or FFMPEG solution, because it does not work well with my Variable Frame Rate in Premiere Elements let it me know.
Also i want an Answer from Adobe why they don't do anything.
I tried to put the x264vfw .dll into plugins or the folder but the problem is not solved.
I am sitting for Quiet a time behind that and see how many threads there existing... and it's only frustrating.
ADOBE it's time to do something!!!

I still think that a lot of peoples have done that. When you see how many persons are suffering by this problem...
Well i have not known about the Adobe Staff tags that they are not the real help from the real support.
Thank you about that.
Normally i would send a mail but there is no option for that... to they're support team.
I said that it hard for me to get some support under the week. I have to work from 6am until 5pm with driving. and have to do some things a home.
Feature Request/Bug Report Form i think will not help or have you used it and got an answer? I want an answer not only request something.
" We normally do not send personal replies to feature requests or bug reports. We do, however, read each and every message. We use the information to improve our products and services. Your comments, suggestions, and ideas for improvements are very important to us. We appreciate you taking the time to send us this information. "
And yes i buied last year Premiere Elements to Christmas time.
I still don't understand why they didn't add support for H264, h264, X264, x264 and AVC-1 for .AVI wrapper when they have the licenses for the codec...
Also .AVI is really often used... not like .MKV

Similar Messages

Is Adobe AIR compatible with the Open Source Media Framework (OSMF)?

Yes, OSMF can be used to play back content within an Adobe AIR application.

Hi Pierre,
Would you mind adding this as a new bug report over at bugbase.adobe.com? I went to look to see if there was an existing bug already in place but couldn't find one. If you can, note this thread url in the bug and post back with the bug URL and I'll follow up internally.
In Yue's original bug, he was able to narrow this down to memory leaks in the spark component video display. He ended up working around it by using the mx video display.
Thanks,
Chris

I am not able to share a blogpost image on facebook using the open graph meta-tag for the blogpost image.

Dear Members,
I am wrestling a few days now, and still not able to get a blogpost image into the facebook share-box.
This is the link where i am talking about:
Top 10 Celebrities on Holiday in Saint Tropez
I have 2 issues:
1
Below ( under the blog-post ) you'll find my facebook like button.
When i like the blog-post, the share-box pops up BUT without the blog image.
I put the link in the debugger window from Facebook, but it tells me that the open graph tag for a image is not proper defined.
this is the link to facebook debugger : https://developers.facebook.com/tools/debug/
So i created this meta-tag : <meta property="og:image" content="/_assets/images/blog/img-{tag_blogpostid}.jpg" />
and put it inside the head of the html code for the detailed blog post lay-out ( site-manager/module-templates/Blog lay-outs/Blog post detail lay-out )
2
I dont know how i must specify the URL to be liked on facebook.
My blog-list url = http://www.duvanduvan.com/blog BUT i have to specify the url for a single blogpost item, but have no idea what to specify. i tried different url's like : duvanduvan.com/blog/{tag_itemurl} etc.... with no result
Can you also help me out here?
I really tried everything i possibly know off but without result :-(
Can somebody help me out here?
Much much appreciated.
Stefan.

try selecting music from the top bar check the songs you want, then sync

Why can't I use the same login and password for apps and cloud

I try to go on to face time and it asks for my login and password which works
ok with the App Store but is not recognised when using face time or I cloud

You can, if logged in using the same Apple ID for all.

Do I need to pay anything to Adobe if I inject java script using some open source library?

Hello,
I want to restrict PDF reader to achieve Digital Rights Management (DRM).
Do I need to pay anything to Adobe if I inject java script to achieve so using some open source library?
Basically I want my PDF documents to be restricted such that I can:
Limit printing
Prevent screenshots
Restrict access by license expiry date
Restrict distribution of downloaded PDF (i.e. the document should run on specific machine only)
Restrict copy and paste within PDF document
I came across below links from which I suspect Adobe expects one to pay if he/she attempts to restrict reader functionality in some way?
http://www.adobe.com/devnet/reader/topic_drm.html
http://www.adobe.com/devnet/acrobat/overview.html
Am I correct in my assumption?

I think it is a vain hope to imagine you could implement DRM via JavaScript. Remember it can be turned off.
Printing is either enabled or disabled according to document security.
Working with PDFs does not require permission from Adobe but
* adding functionality to Adobe Reader definitely does; a DRM development license is a major investment.
* if the file is Reader-enabled, all third party tools will disable that.

TS1702 I installed Adobe Reader so I can read PDFs a teacher has posted online. How do I open the documents using Adobe? I tried the open button, but I still can not get more than the first page. Thanks

I installed Adobe Reader so I can read PDFs a teacher has posted online. How do I open the PDFs? I tried using the open button at the top, but I'm only able to see the first page. Thanks

I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

Does Editing a clip after using the "Open in Timeline" command in the event browser alter the source media file?

Does editing a clip after using the "Open in Timeline" command in the event browser alter the source media file?

C5ELEN wrote:
. Didn't we have that in 7? Seems like I remember we could set the number of undo levels.
Legacy FCP has Revert Project to return to the last saved version, and it has Restore Project to go back to one of the autosaved versions. The maximum number of undo's can be set in user preferences. A lot different than X.
Russ

Why can't I use the adobe illustrator on under armor web page?

Why can't I use the adobe illustrator on the under armor web page?

Website address?
If Flash is required to use the app on the website, Flash is not supported with iOS devices and Adobe recently announced they will no longer be supporting Flash with any mobile device.

Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

Hi, KK93.
Sometimes a simple power cycle of the router and Mac can resolve the issue. However, try the steps in the article below to troubleshoot the Wi-Fi issue with your MacBook.
Troubleshooting Wi-Fi issues in OS X
http://support.apple.com/kb/HT4628
Also, see the article below to make sure the router setting have been optimized for performance.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Cheers,
Jason

Why can't I use the Basic brush tool?

I'm learning the ropes of drawing in Illustrator and I've fallen at the first hurdle. Why can't I use the Basic brush tool? Whenever I select the brush tool and use the 'Basic' brush type, the cursor turns into a hashed circle indicating I can't draw. If I load other brushes, I can draw with other brush types, but I can't use the Basic one. If I select the Basic brush when I have other brushes loaded and try to draw with it, it always defaults to a different brush! I don't understand why.
On a related matter, I'm also having trouble changing brush size. I know that using the [ and ] keys changes brush size, but I have no idea what the values are. If I try this in Photoshop, I can see the brush size in the Options bar, but in Illustrator it doesn't appear anywhere! Not in the Brushes palette, the Stroke palette or the Appearance palette. Where can I see the brush size?

Glitcher,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Can I distribute the open source SWF compiler with my application?

I'm unclear reading the documentation if there is a difference between Adobe's official Flex SDK, and the open source version?
Can I distribute the open source SWF compiler with my application?
I have a flash application that users can change the fonts being displayed, if they supply the fonts in a compiled SWF. I found I can let the user select a font from their computer system, and using the mxmlc command I can easily generate a SWF with the font, which can be loaded by my application so the font will be part of the run time application when played on systems without that font already in the System fonts.
I was wondering if I could distribute the open source SDK so that I could compile these font SWFs for the user so they would not have to get involved in complicated Flash development. The audience is non Flash audience.
I tried using SWFMill but the fonts don't seem to work as they do with the mxmlc compile.
Thank you,
Scott Kerr

Moreover check also the compatibility of your open source license with MPL
Regards, Giuseppe

After I updated iOS 5 can´t use the "open with" for mail attachments.

After I updated iOS 5 on my iPad 2, I can not use the "open with" for mail attachments. The option is not appearing.
For example, when I try to open an .wmv attachment the iOS 5 doesn´t show "open with". Before update, I was able to open with "AZUL" software.
Can anyone help me?

You did say that the option does not appear at all in mail no matter which file type you want to open correct? I can only assume that something went corrupt in the update that affected your settings and that's why this option no longer appears. For experimental purposes, you could try emailing a PDF to yourself and see if that will allow you to use the Open in function in the mail app.
If nobody else jumps into this discussion with a different idea, then maybe you should try restoring your iPad. The best way to do so is - first backup the device - and then restore to factory settings and then you can try restoring from a backup at the end of the process.
However, if one of your settings is corrupt, the backup will be corrupt as well. It may be that you will have to restore to factory settings and then start all over again - adding your apps and content back to the device to get the best results. I would certainly use this process as a last resort. Restoring from a backup maybe all that you need to do.

After saving a file using Excel 2010 in the My Documents folder, it cannot be found using the open button in Excel 2010

When certain files are saved using Excel 2010 to the My Documents folder, they cannot be found by using the Open button within Excel 2010. But the file is always found using My Computer and following the path to My Documents. What is
even odder is that if I do a "Save As" within Excel and rename the file to the same name but with a "!" at the beginning of the name, it will then show up in the Excel Open window. There doesn't seem to be a distinct pattern as to
when the file can or cannot be displayed by the Excel Open button.
I am using Windows 7 64bit along with Office 2010 64bit. Windows has current service packs and updates. There are perhaps 200 - 400 Excel files in the My documents folder. Some of them are .XLS and some are .XLSX.
William Fearn

Hi,
Do you mean that you can't find the Excel file when you click Excel->Open->My Documents folder?
Do you use the other folder path to test?
Dose the issue occur in other Office suits (Word, Power Point)?
Do you get some error message, like "Windows cannot find 'FilePath\FileName', Make sure you typed the name correctly, and then try again."?
Please try the following methods:
Method1:
1. Go to the registry. Click START, and in the RUN command line type REGEDIT and hit ENTER or click OK.
2. Navigate to the following key: HKEY_CLASSES_ROOT\Excel.Sheet.8\Shell\Open\Command
3. Double click on the (Default) instance over to the right. Right now this probably says something like:
C:\Program Files\Microsoft Office\Office14\EXCEL.EXE /dde
Change this value to:
C:\Program Files\Microsoft Office\Office14\EXCEL.EXE /e "%1"
4. Navigate to the following key: HKEY_CLASSES_ROOT\Excel.Sheet.12\Shell\Open\Command
Again, double click the (Default) entry to the right and change
C:\Program Files\Microsoft Office\Office14\EXCEL.EXE /dde
to
C:\Program Files\Microsoft Office\Office14\EXCEL.EXE /e "%1"
Note : Please backup the registry key before you modify.
Method2:
Click the File tab, and then click Options.
Click Advanced, scroll down to the General
section, and then clear the Ignore other applications that use Dynamic Data Exchange (DDE) check box in the
General area.
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Exporting to Facebook - why can't I use the old plug-in?

It's nice that iPhoto '09 tried to help us with the Facebook exporter built-in. But why couldn't they make it useful? Why can't I tag people before I upload them? Why can't I upload photos to an existing album? I wouldn't mind so much, but they seemed to have disabled the existing (working) plug-in that was available. So now I have to export the pictures to my desktop and upload them through Facebook. Hmm...doesn't seem too user-friendly.

Exporting to Facebook - why can't I use the old plug-in?
Have you considered asking the author of the plug-in?
It's nice that iPhoto '09 tried to help us with the Facebook exporter built-in. But why couldn't they make it useful?
Millions upon millions of people do find it very useful
Why can't I tag people before I upload them?
You can - have you watched the iPhoto tutorials?
Why can't I upload photos to an existing album?
You can IF the album was created by iPhoto
Do you have an iPhoto question that one of the iPhoto users who volunteer here might be able to help with?
LN

Why Adobe doesn't use the open source codec x264vfw for Elements as .AVI?

Similar Messages

Maybe you are looking for