Why AdobePPro CS4 won't work properly with Win7 Ultimate OS

Can u please explain why Adobe PremierePro CS4 won'r work properly with Windows 7 Ultimate?? Is it because of a "bit" differences?? or for any other reason?? I have freezing problems on time line.. I am using Sony XD EX1 clips on the time line. Sometimes it works up to Dynamic LInk Encore and when it starts encoding, after few seconds it gives an error message "Encode failed" My computer config: WIN7 Ultimate/ Xeon 2.4 GHz, 12 GB RAM, Nvidia FX3800 Video card with 1GB RAM, C:\ 1TB SASHDD on RAID 5 system, D:\600 GB SAS HDD (not on RAID) Any thoughts to get it going? Thanks

Read A fix via Virtual XP
http://forums.adobe.com/thread/702693?tstart=0

Similar Messages

Premiere CS4 doesn't work properly with Windows 7 trial - Please help!

Hello!
I have installed the trial version of Windows 7 on my laptop and now my Premiere CS4 doesn't play the timeline in real time anymore. It worked fine with Windows Vista. I have also installed the newest Premiere update, but it didn't help. Is there a patch for Windows 7 (64bit) or will I have to wait until the full version comes out and try it again then?
Thanks in advance for your help.
Rafiki

It's a laptop and probably an older one, that means it is probably underpowered.
It's a laptop and that probably means it is a single 5400 rpm disk which is inadequate.
Bill,
Probably good observations. I tend to loose sight of the fact that most laptops are not like mine and forget the common limitations. One mentions "laptop," and I see my Sager - duh! on me.
To the OP, this ARTICLE might also offer some tips on getting your computer ready for an NLE session. Common references are to how things are done in XP-Pro (my OS), but you should be able to "read between the lines," and adapt the general concepts to Win7 and your setup.
Also, giving full specs. on your laptop might help greatly, otherwise we're all just guessing. Bill brings up a couple of critical points. Your details will either point to them, or dismiss them.
Good luck,
Hunt

My Extigy won't work properly with Wi

I have upgraded my PC to WinXP. I have a Creative Extigy with 5. speakers, and on my old PC it all?worked perfectly. With the new computer?the 5. rear?right and left speakers won't work. The others work just fine !?There seems to be no signal coming from the Extigy when I play from Musicmatch Juke box. But if I play something throught MixMeister3 it works just fine. Any ideas what the problem is ? ... thanks ... Roger

hey..actually i have same problem 2 days ago n yesterday my imessage finaly worked..
in my case i use another sim card/not original bundling,then i use my original sim card/carrier, n it instanly worked..
so actually carrier does take the problem..
im sory my english is terrible bad,im from indonesia..thank you

Wireless Mighty Mouse won't work properly with MacBook/tech support stumped

Hi. First post. Anyone heard of this problem? Appears to be location-sensitive. Problem described below, but first, short background...
Just bought entire Mac system after decades in corporate world with PC. Believed the TV ads that it would be simple. Already have been back to Mac store 6 times and have spent roughly 7 hours on phone with help line. Mac store even replaced Macbook entirely in case it was faulty logic board/Bluetooth circuit -- didn't help. Also, problem doesn't happen in store. So, to get to the point:
Wireless Mighty Mouse doesn't work properly when hooked up to Macbook -- herky-jerky, slow, unresponsive, sluggish, imprecise, intermittently better/worse. Went through a few Mighty Mouses and finally gave up; now using hardwire mouse and there's no problem. But before I return Mighty Mouse for refund, would like to see if there's a solution b/c I'd prefer wireless.
System is the latest little souped-up Macbook, 23" HD Cinema external monitor, external wireless Apple keyboard (which works fine), wireless Mighty Mouse (the culprit), Airport Express, HP printer. All brand new from local Mac store (Fifth Avenue, New York)... where the Genius counter folks have given up. I'm not convinced they believe me because (a) the problem doesn't occur there, and (b) after a couple of new Mighty Mouses, they finally just gave me a new Macbook to make me go away... but after going through the whole system setup once again, same problem. Have tried many different mousepads, BTW.
Tried all the stuff phone tech support suggested -- removing/installing/reinstalling software, etc. Airport works fine; using modem and printer connections there. Bluetooth works fine with keyboard. I've scouted around for intefering devices; even unplugged electrostatic loudspeakers and old tubed amps in living room (concrete wall separates rooms), unplugged hifi in same room, etc. On 40th floor of Manhattan hi-rise; concrete walls between neighbors. Have never had interference before with anything; previous PC system worked fine with Microsoft wireless (optical) mouse.
This is no longer urgent because hardwired Apple mouse works well. It's just mysterious.
Any thoughts?
Other than that, I like the Mac environment so far. Fifth Avenue store is cool, also, because it's open 24/7.
Ken
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM

Hey, thanks! That was fast. I'm impressed by the Mac community.
This program helped my hardwired mouse, actually, and did give me wider parameters on the wireless mouse, but it didn't correct the herky-jerky/sluggishness -- actually amplified those problems.
Ken

Photobucket won't work properly with Safari 6.1.6 update.

What the heck is going on now? Updated Safari as part of regular, monthly process. Now the editor and other features of Photobucket won't work.

Gustavo,
Since you used Software Update for 10.6.3, try downloading and installing the Mac OS X v10.6.3 Update (Combo).
;~)

160GB iPod Classic Won't Work Properly with speaker systems

My 120GB works fine with my iHome, and a new speaker system I just purchased... because I thought my iHome was broken, because when I used my 160GB in it, it didn't respond to "play/pause" commands with either the remote or the speaker command. When I tried the 160GB on the new system I bought, it didn't respond either. Should the 160GB work fine with those systems if they play the 120GB without a problem? I'm a bit confused on the issue.

More info would be helpful
What do you see on the iPod screen when you connect to the PC?
Which version of iTunes are you using?
What is the iPod software version as shown in iTunes summary page, the last time you connect successfully.? Or just, on the iPod, press Settings->About
press the select button 3 times and you will get the software version.
HAVE A NICE DAY!

Why doesn't my Phone work properly with my Cars Bu...

Car manufacturers are now building complex car kits into their vehicles.
The companies include:
Ford, Audi, BMW, Alfa Romeo, Peugeot, Vauxhall/Opel, Volkswagen, Mercedes, and other high end specification cars.
One of the functions, is that it pulls the phone book data from the phone via bluetooth.
Background Information
A lot of the Nokia E and N series, Symbian S60 handsets, do not carry the required bluetooth profile in their bluetooth stack.
The phone is missing the Phone Book Access Profile (PBAP) that allows the car to pull data from the phone.
Why the phones do not carry the profile is unknown. What is known is that using the Nokia 810 car kit downloader software, you can partly restore some of this functionality.
Additionally the Nokia 616 Car Kit Downloader will also function, along with the Ford Connectivity Downloader.
Workaround
The information is here:
http://europe.nokia.com/A4143881
You'll need to delete the existing pairing in the handset and the car, then install and run the application, don't just install the application and expect it to work, you must re-pair the handset and the car.
When it is installed start the application, and then re-pair the phone to the radio, this may then copy your contacts into the radio, be paitent, as it can take a few minutes to copy and setup.
It may copy the phone book over, but the Missed Dialled and Received calls may not work.
I have tested this with an Audi S3, A4, and A6 on a Nokia N82 and N95.
The Nokia E71, appears to have the profile and functions correctly with an Audi car kit, in Handsfree Profile mode.
The Nokia E71, when connected in SIM access profile mode is the same as the other E and N series handsets are requires the 810 or 616 downloader to be installed in the handset.
Installing the 810/616 downloader only restores phone book functionality, there are some software combinations on car and phones that work without the downloader.
It may also be possible for your car manufacturers franchised dealer to be able to update the software in your car so that additional features are available, they may charge for this service. Also updating software in the phone may also help, as Nokia may see fit to add the profile if they are able.
For some cars and handsets, when you are connecting with the SIM Access Profile function, you will still need to install the 616/810 downloader application as detailed above, as the phone normally switches off most of its functionality. The phone book will then normally function when you have installed the application.
The workaround only resolves the problem with the phone book. Problems such as random disconnecting which also is reported, are beyond the scope of this article.
Edit: 24-01-09
I have noticed recently that random disconnecting can be caused if you have an Internet Telephony Service running in your handset. Also if you have the WLAN discovery setting enabled then this can cause the same problem - whilst I am not attempting to try and resolve random disconnects, it could be a reason for why this is happening.
I have recently installed a VoIP service in my handset and 100 mtrs from my home when the handset disconnects from this service at my house, the Bluetooth disconnects from the Car Kit, in my E71.
Edit 14-04-09
Audi also make a Bluetooth Sim Access Profile adapter for their Generation II and Generation III (Low) mobile telephone interface. (Audi Part No: 8P0051440) The SIM access service will require the 810 phone kit downloader application. With this on my kit I am getting disconnections with Bluetooth. To prevent this, I switch Bluetooth off and then on again prior to connecting to the kit, this resolves the disconnecting.
Edit 12-05-09
Further to the Audi edit above, I now have an Audi S4 2009 with the Audi Mobile Phone Preparation (high) for this to function correctly with phone book access the 810 Downloader needs to be installed, and running when the phone connects to the car every time it connects. Otherwise the phone book access does not operate.
Edit:12-06-09
You can also use the Ford Contact Downloader application from
http://www.ford-mobile-connectivity.com/ - select downloads then Select a Nokia E or N Series Device and download the contact application (this works fine in my Audi)
Shunts...
Message Edited by shuntfield on 02-Nov-2009 02:51 PM
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

It allows me to load the AKO CAC sign in page. I click sign in using CAC, it asks me for my pin, I enter it then it load the page saying it has a problem with the security

Why will some CDs not work properly with my Macbook Pro with Retina display?

I have the external CD drive for the Macbook Pro with Retina display, but I'm finding that some CDs will not run their applications properly. However, on the older editions of the Macbook Pro (for example, on the 13"), the programs run fine. Is there something I can download to fix this problem?

When the MBP-R does not run CD applications "properly", what does it do?
Is it possible that the applications that do not run properly are incompatible with Mountain Lion? For example, might they be old PowerPC applications that relied on Rosetta to run on Intel CPUs?

Photosmart premium C309m - won't work properly with wireless

Hey there,
As the subject suggests, i am having major problems with this printer (c309m). The problem is that every time i need to print something out, from one of my two computers the printer stalls or doesnt work - or what ever the problem might be. I have tried all the solutions provided in the troubleshooting section and none have worked. I got it to print from 1 computer, but then the next time i turn it on, i just doesnt work anymore.
Im running win7 64 on one machine, and win7 32 on the other. The printer is connected through the wireless router (D-link 655).
I have tried using HP's diagnostics programs and they either cant connect or they come up with the print que stuck error. Each time i fix it, it works for 1 sec and then stalls when i print something again.
In short - the printer can work for like 5 minutes with 1 computer, but the next time it's used it cant get the connection or the print jobs get stuck in print cue.
I could really use some help here, since this is my last option of getting this printer to work

Some additional info,
Both computers are running norton 350 v. 5.0
Im using reserved Dhcp adresses for my printer and all other devices on my network.
These devces are connected
Zeke-PC
80:1f:02:08:c8:8d
192.168.0.193
Kathrine-PC
00:1a:73:e5:33:02
192.168.0.196
SonosZP
00:0e:58:29:f1:8a
192.168.0.197
SonosZB
00:0e:58:44:b9:12
192.168.0.199
HP6EFADB
78:e7:d1:6e:fa:dc
192.168.0.187
Zeke-iPod
58:55:ca:99:e6:de
192.168.0.188
My D-link 655 is running WPA/WPA2 - Personal

Old Netscape console 4.2 not working properly with new Directory Server 5.2

After successfully installing Messaging Server 5.2 and applying patch 2, the old Netscape Console doesn't work properly, I tried running the script which is given in the link
http://docs.sun.com/source/816-6734-10/index.html
which hobbles the server by creating a set of dummy jar files in order for the directory server console not making any changes on the messaging server. At first I got these messages:
Failed to install a local copy of msgadmin52.jar or one of its supporting files: not a ZIP file (END header not found)
I got the same message for these 2 files:
admserv42.jar
msgadmin52.jar
After that I made real dummy jar files using a zero-length file I created with touch and I got these messages:
class com.netscape.management.admser.AdminServer not found
After that I erased all the files created by the script and I get these messages:
failed to install a copy of admserv51.jar or one of its supporting files: null
failed to install a copy of msgadmin.jar or one of its supporting files: msgadmin52.jar not found at http://192.168.10.205:5001/
and for admserv42.jar I get the same message
Does anyone have a clue on what to do next??
thanks in advance
Eduardo

The thing is that the netscape console 4.5 won't work properly with messaging server 5.2, and the directory server console is not working properly for the directory server. I already know the limitations about these consoles since it is explained in the doc where the procedure of migrating from a 4.x directory server to 5.1. I

Itunes on my 4s not working properly with docking stations

Just in the last week itunes on my 4s won't work properly with my docking stations. I have one at home that is my alarm clock and while my phone will charge when my alarm goes off it will not play music, it just beeps which is what it does when the alarm goes off and the phone is not on it. If I press play on my the Itunes app itself it will play music. I have a station at work that I use daily as well, and same thing there, if I press the play button the station it won't work, but if press the play button on the app it will play. I believe it is an Itunes app issue because it will work as it is supposed to with the pandora appg. Anyone else having this type of issue? Any suggestions or tips are welcome.

Get a magnifying glass and closely inspect your dock connector and clean any dirt, debris, dust bunnies, corrosion or anything else you find.

Will Dreamweaver CS4 work properly with 10.6.1 Snow Leopard?

Hello
Can anyone tell me please, if Adobe Dreamweaver CS4 work properly with my MacBook OS 10.6.1 Snow Leopard? Adobe state "Mac OS X v10.4.11–10.5.4" in the system requirements, but does this mean, in practise, that Dreamweaver will not work properly with Snow Leopard?
I have tried to find info about this here, but have spend ages wading through masses of complaints about various applications crashing for people after they upgraded to 10.6.1 Snow Leopard. Personally, touch wood, I've had no problems with Snow Leopard, but I only really use it for Internet surfing and word processing (my work, music stuff on Logic Pro 8, is done on my Mac Pro which came with Leopard and which I am NOT upgrading - not yet!).
I have also attempted to get an answer from Adobe - I 'phoned their "Pre-sales enquiries" number 0800 028 0148 (in the UK) and spoke to someone who sounded as if she was on the moon and who clearly had absolutely no idea what I was talking about. I gave up with them! They didn't give an email address to ask on.
I'd be very grateful if anyone can give a clear, authoritative answer please - if possible.

I've been a Mac user since 1987 and have never upgraded the OS too soon after a new version was launched. Any new OS, like new houses, will have a 'snagging list' - unforeseen problems that arise and need to be sorted before your purchase is truly habitable and functions as expected.
But the stability of OS X 10.5 paved the way for my lapse of judgement when I upgraded to Snow Panther last week, while its compatibility with some major software is still clearly too buggy.
I've been using Dreamweaver (DW) CS4 successfully on OS X 10.5 for some time. Since installing OS X 10.6.1 I now have problems with DW, which I've alerted Adobe to.
When using Design View in DW CS4, any formatted text - from html tags to css tags - disappears from the Design view. The code appears correctly in the Code window and even if you highlight text that has coding attached in Code view - eg text with a url link attached - the Design view continues to ignore it and removes the text from its view. I've discovered that my heading tags (h1, h2, etc) all make the text disappear in Design view in a way that would be the envy of members of the Magic Circle! The only thing that seems to get through is text that is surrounded by paragraph tags.
Thing is that 'Preview in Browser' shows the page correctly (except in Opera, which I've only installed since installing Snow Leopard, so I can't say how this displayed in the previous OS versions).
Also when I upload the site to the server it all seems to display more or less as it should.
So currently it seems that DW CS4's Design view is no longer WYSIWYG! Expect to find lots of text hidden in Design view and have to use Code view much more.
It would be nice to think that Apple and Adobe would talk to each other and work it out between them.
re: Dreamweaver, I'd check back to Adobe.com regularly to see when they upgrade the OS requirements to 10.6.1 (I hadn't spotted before I bought Snow Leopard that they only go up to 10.5 in their OS recommendations).
My advice if you're thinking of upgrading to Snow Panther: delay it until it more of it works compatibly with your major applications. Check the OS spec from each software manufacturer first. Meanwhile I'll just have to wait patiently for Apple & Adobe to get their act together...
Message was edited by: bcmartin

I have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

i have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

Please authorize ADE 3 with same credentials that you used with older version of ADE

I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

See Recover your iTunes library from your iPod or iOS device.
tt2

Why can't I get open type features to work properly with an open type font on InDesign CS5.5?

I installed a very complete set of styles of an opentype font with Font Book – Mac OS X 10.9.4 – but when I tried to format a sample text on InDesign CS5.5 I noticed that I could not use the opentype features on the Open Type menu as I usually do.
Could anyone help me, please?

It's ffScala Sans, but has separate files for small caps, figures, etc.
I was trying to use small caps, lining figures and superscripts when I
noticed none of the OT features are available.
2014-07-30 21:56 GMT+01:00 Miguel Sousa <[email protected]>:
Why can't I get open type features to work properly with an open type
font on InDesign CS5.5? created by Miguel Sousa
<https://forums.adobe.com/people/MiguelSousa> in Adobe Type - View the
full discussion <https://forums.adobe.com/message/6598614#6598614>

Why AdobePPro CS4 won't work properly with Win7 Ultimate OS

Similar Messages

Maybe you are looking for