Why after I update to iTunes 10.6.1 on my windows 7 64bits I can not synchronize my iPhone 4s 64gigs?

After I updated to itunes 10.6.1 I can not synchronize my iphone 4s.

I attempted to upgrade to V 11.0.1
which ended with an error message and a code 2330.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Similar Messages

Why after I updated my ITunes to 11.1 and my windos to 8.1 my ITunes won't Sync and can't even find my IPad.

I updated my windows 8 to 8.1 and now my ITunes 11.1 is not finding my IPAD, my computor know its there, but my Ipad doesn't.
I'm not sure why I do updates, give me back my windows 7 and the old ITunes.
any help will be great.

Went onto a different thread & followed these steps posted by user gck55 & iTunes recognizes my device now, you might give it a try.
a) Get Windows to restart the drivers:
    - disconnect your USB device and close ITunes
    - connect your USB device
    - if ITunes loads, close it.
b) File explorer:
Open File explorer and browse to
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
In that folder there should be a set of files named "usbaapl64...."
right click on the one ending in "INF"
Select Install. It's very quick.
remove the USB device
c) Restart the computer.
When you login again, load ITunes before you attach your USB device.

I try to update mt Itunes to 11.1.5 and it stops and i can not open itunes store without itunes crashing.

I can not update ITunes to 11.1.5 becasue it stops when it's almost done. Then I can not open the store and Itunes crashes and it tells me to update and ITunes closes. I'm nt very happy.

Many thanks, that's perfect.
Errors occurred while installing the update. If the probalem persists choose Tools > Download Only and try installing manually.
With that one, first try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Since I updated to Lion Mac OS X 10.7 I can´t synchronize my iPhone 4 with iTunes 10.4 anymore

Hi community,
after I updated my MacBook Pro to Lion Mac OS X 10.7 I can´t synchronize my iPhone 4 with iTunes 10.4.1 anymore.
Is there anybody who solved this problem in the meantime?
Thanks for your support.

iTunes 11 requires Mac OS X 10.6.8 or newer, which requires an Intel Mac with at least 1GB of RAM.
(90288)

How can i synchronize my iphone with iTunes????

Hi gays i have problem i can not synchronize my iphone with iTunes i put my usb in my computer with my iphone but he open my picture but can not found my device don`t show me that i have device connected in this computer please help i have iphone 3gs / ios5.

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

My 5th Gen iPod Touch will not sync after I updated my iTunes

Right after I updated my iTunes on my PC, it will no longer sync anything. My apps, my music, everything won't sync.
It just says that I can't sync because I need more space (8.30GB to be exact). But before I updated my iTunes, everything was fine. The thing is I want my iTunes and iPod to synchronize with each other without losing anything.
Can someone help me?
Also, my OS is already iOs 7.1

Do you have the right boxes checked to sync? It appears not.
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod
Next
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
Last
- Restore to factory settings/new iOS device.

HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
Is there a way to resolve this issue?

HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running". Windows 7.

After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Not connected in the internet?? after i updated my itunes to 10.5.3.3

after i updated my itunes to 10.5.3.3 i cannot update my ipad to ios5.
it says i cannot connect to the software update server because im not connected to the internet?!
i already checked the firewall settings and still it cannot connect to the software updater??
please help...thanks

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

HT4623 Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

Contact your carrier to ensure data access via their network is provisioned properly for your account and iPhone with the new iOS 6 update installed.

Error code msvcr80 after last update now itunes will not open

Error code msvcr80 after last update now itunes will not open. Reinstalled and still does not work

Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98968)

After I updated my iTunes, my devices are not appearing in iTunes and won't let me sync

please help - after I updated my iTunes on my PC (Windows 8), my iTunes won't recognize any of my devices to sync anymore. How can I fix this?
trying to sync, iPod (5th generation), iPod Touch (4th generation), iPhone 5s and iPad 3rd generation
thanks in advance

try this discussion article https://discussions.apple.com/thread/3504919?start=0&tstart=0

My mac pro stuck on startup screen after i update the itunes

please help me on my mac pro, after i update the itunes into a new version, i restart it and then it stucks into gray with the apple logo and some words/ letter about error appear in the screen

Hello jaydenmarcus,
The following article provides some useful information and troubleshooting steps that can help resolve recurring kernel panics.
OS X: About kernel panics
http://support.apple.com/kb/TS3742
Cheers,
Allen

My IPad will not respond to my pass code after I updated. iTunes says 'disable find my ipad' before I can restore from backup.

My IPad will not respond to my pass code after I updated from ITunes. ITunes says I must disable ''find my ipad'' in order to restore. I cannot get to that because my pass code is locked.
I only have one back up & that is the one I did when I updated. (Can't remember if it was before or after)

iTunes wants you to disable find my iPad because Apple wants to make sure you are not trying to restore someone else's iPad.
To turn off find my iPad, you need to enter your Apple ID password.

My iphone got unlocked after the update from itunes What do i do now?

My iphone got unlocked after the update from itunes What do i do now?

More information will be helpful, what do you mean by unlocked exactly? what happens when you make a call or tap on an application.

Why after I update to iTunes 10.6.1 on my windows 7 64bits I can not synchronize my iPhone 4s 64gigs?

Similar Messages

Maybe you are looking for