Why after i upgraded version 6.1.2, My mail for yahoo cannot connect to my email ?

My ipad, Mac book and iphone also cannot connect to yahoo mail ?

I've had the same problem. Updated last night and haven't been able to use the phone at all since then. Black screen, grey screen, light blue screen, pixelated screen, white screen with darkened corners, flickering screen, white stripe across screen, no connectivity to anyone's computer incl bluetooth. Recurrent dead battery. Occasional apple on screen.
Dead.
Have you had any joy with yours? Or should I just bin it?

Similar Messages

  • Unable to continue activation after i upgrade version

    unable to continue activation after i upgrade version in my 3gs who knows how to solve it?

    That's almost always because the phone was hacked to illegally unlock it.

  • What can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for VZW on Sept 8?

    what can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for Verizon on September 8?
    I guess it can run fine on Wi-Fi and become a media player.... or is there a market for 1-month-old Droid Charge phones?
    How much trade-in value can I get from VZW or BestBuy or Amazon?
    Thanks!

    http://www.droid-life.com/2011/08/03/leaked-verizon-roadmap-reveals-potential-launch-dates-for-stratosphere-vigor-bionic-and-more/
    DROID Bionic:  (9/8 launch) – You already know everything about this device, don’t you?
    Samsung Stratosphere:  (9/8 launch) – 4G LTE device running Android 2.3
    HTC Vigor:  (10/6 launch) – Will replace the HTC Thunderbolt
    LG Revolution 2:  (10/20 launch) – Will replace the original Revolution
    Samsung Galaxy Tab P8 (November launch) – Could be the 8.9″ Galaxy Tab?
    Samsung Illusion:  (9/29 launch) – 3G smartphone running Android 2.3
    Samsung Plato:  (January launch) – whatever it is, it was pushed to 2012
    HTC Bliss:  (9/29 launch) – Lower end Android 2.3 device; the chick phone?
    Motorola XOOM 4G LTE:  (9/8 launch) – Assuming this is the date that the 4G LTE upgrade starts. Also when the 4G LTE version will be in stores.

  • I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define

    I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
    Thanks,
    Eyal

    I tried this! Somebody suggested it in another thread. It did not work, sadly.

  • After my trial version, i bought a month licence for premiere pro, but i cant get the serial number to activate it

    after my trial version, i bought a month licence for premiere pro, but i cant get the serial number to activate it

    There are no serial numbers for CC plans.
    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • Am, Am not hateing but but why did we upgrade in the jailbrake commuty get Siri for free I waste my money I should of kept my iPhone 4

    Am, Am not hateing but but why did we upgrade in the jailbrake commuty get Siri for free I waste my money I should of kept my iPhone 4

    Yeay! Why do I bother getting up and going to work every morning? I mean, look at thos guys out there just walking into liquour stores with guns. They get all the free booze and money they want! How come I have to pay for it? It's not fair.

  • I deleted my old email address and added a new one, after my iPhone died iCloud keeps popping up asking for the password of my old email address. I can't remember my password and the account is still gone, it pops up every few seconds. How can I fix this?

    I deleted my old email address and added a new one, after my iPhone died iCloud keeps popping up asking for the password of my old email address. I can't remember my password and the account is still gone, it pops up every few seconds. How can I fix this?

    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • I need to download a version of Firefox that is optimized for Yahoo! but I cannot use Firefox 4 for Yahoo! because it doesn't support Norton 360 as of yet. Any suggestions?

    If you do have any suggestions, where can I find it? The only place I know of is the http://www.mozilla.com/en-US/firefox/all-older.html web site and you can only get version 3.6.16 there and it's NOT optimized for Yahoo!. Please help!
    Yahoo! keeps sending me the following message in a box on my screen along with the links to Firefox 4 and IE : Attention: Please upgrade to the latest Yahoo! optimized browser to ensure the best Yahoo! experience. But, as I stated in the question above, I cannot use Firefox 4 yet because it does NOT support Norton 360. Plus, I don't trust IE8 to use Facebook!
    Thanks for any help you can give me! Your very prompt attention to this question is greatly appreciated as I am sort of at a standstill before moving on with my work.
    Regards,
    Christine
    (Running Windows Vista Service Pack 2)

    Symantec have released an update for Norton 360 to make it compatible with Firefox 4, for details see http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US

  • Help...downloaded new version of itunes...and now I cannot connect

    I just downloaded new version of itunes and now I cannot connect to the itunes store...I get a message that says..."Itunes cannot connect to itunes store. the network connection timed out."
    ran diagnostics here are the results... if anyone can help...
    Microsoft Windows Vista Home Premium Edition (Build 6000)
    Hewlett-Packard Presario F700 (GR967UA#ABA)
    iTunes 8.2.0.23
    QuickTime 7.6.2
    FairPlay 1.4.10
    iPod Updater Library 8.1d19
    CD Driver 2.1.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.5.0.31
    Apple Mobile Device Driver not found.
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number D3C70EE5E29DDAC2
    Current user is not an administrator.
    The current local date and time is 2009-06-09 23:19:03.
    iTunes is not running in safe mode.
    Video Display Information
    NVIDIA, NVIDIA GeForce Go 6100
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {C07101F5-89CB-4921-9239-F59263AF4FAA}
    Description: Broadcom 802.11b/g WLAN
    IP Address: 192.168.1.2
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Tue Jun 09 22:30:17 2009
    Lease Expires: Wed Jun 10 22:30:17 2009
    DNS Servers: 192.168.1.1
    192.168.1.1
    Adapter Name: {33E3719A-76B1-48B1-9F31-BD3CBF2DBDDA}
    Description: NVIDIA nForce Networking Controller
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Wed Dec 31 19:00:00 1969
    Lease Expires: Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Connection attempt to iTunes Store was unsuccessful.
    The network connection timed out.
    Secure connection attempt to iTunes Store was unsuccessful.
    The network connection timed out.
    Secure connection attempt to iPhone activation server unsuccessful.
    The network connection timed out.
    Last successful store access was 2009-06-08 09:41:24.
    ** CD/DVD Drive Tests **
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.1.0.1),
    E: TSSTcorp CD/DVDW TS-L632M, Rev 0A17
    Audio CD in drive.
    Found 1 songs on CD, playing time 04:24 on Audio CD.
    Track 1, start time 00:02:00
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 10 16 20 24.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    ** iPod/iPhone Connectivity Tests **
    iPodService 8.2.0.23 is currently running.
    iTunesHelper 8.2.0.23 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Device Not Currently Connected:
    iPod nano (Second Generation) running firmware version 1.1.1
    Serial Number: 7J651R7ZVQ5
    ** iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.

    Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
    Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure; you can find instructions for Norton on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
    Hope this helps.

  • HT3748 since upgrading to Mountain Lion, my Mac Mail no longer works well w/exchange email; so, I have had to switch back to outlook. Now, how can I use outlook for mac's calendar and contacts with icloud?

    Since uprgading to Mountain Lion, my mac mail no longer works with my exchange email properly. I finally gave up and moved back to outlook for mac, but now my new issue is using outlook calendar and contacts with icloud; possible?

    Sorry but I'm really not to sure what I have. I'm not good with knowing my computer model. All I know is that its a MacBook running with Leopard. I got my computer last year so I suppose its fairly new. Is there a place on my computer where I can check to see what it is (sorry to be so dumb with my own mac)
    And everything else works fine. I love Safari. It's just my mail that doesn't work. Here's the message that pop up several times.
    "The MobileMe IMAP server “mail.mac.com” rejected the password for user “akcastaldo”
    Please re-enter your password, or cancel."
    The only problem here is, even though I enter my password it doesn't do anything. It makes that message go away for about 3-5 mins. After that it pops right back up. And I can't even go into my preference and change my email password. So I don't know what to do.

  • Why are security headers not visible when viewing "sent" mail for mail sent with S/MIME certificates?

    I am using an S/MIME certificate to sign my emails using Mail on Mountain Lion 10.8.2.  I have a trusted S/MIME certificate for each of my email accounts.  The certs and private keys are properly installed in the keychain.  I am able to successfully send signed (and optionality encrypted) email and the recipients are all all receiving the emails showing a trusted signed email without having to acknowledge or trust the signature.  So technically the certificates are working.  Obviously the encryption option is only offered when I also have the recipients certficate in my keychain.
    What I am noticing is that when I look in my sent items - (regardless of which email I used as the "sender") - I don't see any indication in the mail headers that the mail was sent with a signed certificate - even though I know the recipient is seeing that the mail is signed with a cert.  I have no way of telling whether I sent the mail as "signed" or "unsiged".  The default is to use the certificate for all outbound emails - unless I specifically uncheck the secure signing option before sending.  In mail that I recieve - sent from others with certs or sent from one of my email accounts to the other - I see the the certificate indication in the email header.
    On rare occasion - I do see the certificate when viewing sent mail - but only for  random sent mails - and so far I believe I have only seen the certificate show up in mail that is sent from my iCloud account.  I can send subsequent mail from iCloud - and still not see the certificate in the sent items.
    Why am I not seeing the Security Header showing the certificate when viewing mail that I have sent in my sent items folder?  Is there some setting that I am not seeing that controls this - or is this a bug in Mac Mail?  Also why does the security header show up for just a handful of sent emails - when hundreds of signed emails have been successfully sent.
    Any help would be appreciated.  The behavior is the same on my other Macs - at least the ones on which the certificates are also installed.
    Also - I don't have my certs installed on my iPhone yet - so I can't tell on the iPhone if the certs are showing up in the sent folder - but I can see the certs on mail that I send to myself from the Mac but receive on the iPhone.
    ~Scott

    I stopped using the S/MIME certs and stopped signing my emails.  Too many recipients were receiving them as "attachements" especially if the recipients email account was on an Exchange server.  My certs have since expired and I have not done anything to further analyze the situation.  My original post was over a year ago and I have long since been on Mavericks.
    To: iddontknowwhoiamsowhat ... I am not totally following your response.  You say you are seeing the exact same issue - yet you are also saying you can look at the sent mails from os x and ios - does this mean that you see the security badges on the sent emails in both os x and ios?  I assume you are on Mavericks?

  • HT4623 Why after my upgrade to OS 7 are all my key strokes now delayed 5 to 10 seconds after typing?

    After upgrading my iPhone to OS 7, all my key strokes take 5 - 10 seconds to populate, why?

    RESET DEVICE
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

  • Why does Firefox upgrade version 3.6.13 state that it works with all current addons, it will not work with Roboform!

    Back on Dec 23 I ask if it was possible, after upgrading to version 3.6.13, could I go back to the version I had been using. A very helpful person, "Buddahfan", instructed me how to accomplish this. I have downloaded version 3.5.16, as this is what I think I had before. Anyway, my reason for not wanting 3.6.13 is it will not accept a VERY helpful add-on I have come to use daily, Roboform. Problem is the advertisement for the new version states it will work with all add-ons and it obviously does not. What benefits am I losing by sticking with 3.5.16 after I have downloaded all updates?

    All you needed to do for 3.6.13 was to install the latest Roboform adapter for Firefox from here: <br />
    http://www.roboform.com/platforms/browsers/firefox

  • Why does my upgraded version of FF keep reverting back to an older version?

    For the past month, I have repeatedly installed FF ver. 3.6.19. It takes and everything is fine when the window is initially open. As soon as I close out of FF and open it back up again, it reverts back to 3.6.15. This happens when I close out the window or I restart my computer. I have uninstalled FF about 4 times now and just installed 3.6.19 but it keeps reverting to 3.6.15. However, in the Control Panel, under Uninstall Programs, it is listed as 3.6.19.
    I also frequently get a pop box that tells me to upgrade to 3.6.18. I click ok but it just keeps "scanning" and no update ever takes place.
    This problem actually started when I upgraded to FF ver. 5. I had version 5 on my computer for a few days and then it somehow downgraded itself to 3.6.15. I have not be able to successfully upgrade FF since then.

    I don't know what "popup" you're referring to. Do you mean the Control Center? If so, you can turn off that feature appearing in your apps in Settings - Control Center. I also don't know what you mean by "where did the dictionary go". Can you explain your problem more completely?
    As to downgrading, that is not supported. If you are unhappy with features in iOS 7, you can comment to Apple via their feedback pages:
    http://www.apple.com/feedback/ipad.html
    Regards.

  • Why after I upgraded with the osi you cannot play tv shows with getting up and starting the next one was able to do it before this really *****

    I upgraded to the  latest upgrade and now the countinious play on the on the ipad like it use to , you could hit the arrow on top and it would play all the 15 tv
    shows til it's over now you have to hit start with every new one starts this really ***** . when you are in bed ane the ipad is hooked up to the TV thru
    the HDMI cable need to make this right or back to what it use to do PLEASE

    The shuffle is not a backup device.
    Was the media actually moved from the old computer to the new computer? If not, how did you magically make the content appear on the new system?
    Use the backup of the old computer to put all the content on the new computer.

Maybe you are looking for

  • I have recently purchased a Nikon D7100 and can no longer use Photoshop CS5 to process RAW files.What are my solutions ?

    I am sure this has been asked before for similar new camera buyers, but as I have made a sizeable investment in purchasing PS 5  less than one year ago, I expect ADOBE to have an upgrade available for my new Nikon D7100 camera. Other Software makers

  • Zoom in on Images

    Flash 8 Trial Mode, XP-P, Kinda new to Flash, too. I'm using the template Modern Photo Slideshow that came with the trial version. Its default stage is 640 x 480, which I need to change to 320 x 240. I know how to do that, but once I do that, does it

  • How can I get xml data from KM?

    Hi guys, how can i get a xml data from KM? I saved an xml document in KM, and I want to read its content. How can I get this document? Using DocResource = (IResource) resFactory.getResource(RID.getRID("Document/ Path"),resContext)? I want to know whi

  • OSB 11g with  PASS-THROUGH PROXY

    hello all, I my designing on latest Fusion Middleware 11g Release 1 (11.1.1.5.0) a http soap based osb proxy service wraped around owsm saml2.0- sender- vouches-message-protection service policy a http soap based osb business service wrapped around o

  • Itunes can't "read' my iPod.

    When ever iTunes tries to update my iPod with the latest CDs I've transfered it says that "The iPod cannot be updated. The disnl could not be read or written to." What does this mean. I've transfered CD's to my iPod before. HELP!