Why, after successful Photoshop install, why won't Dreamweaver & others install?

On a PC with Vista 32 Home Premium:
Photoshop downloaded and installed OK--but then Dreamweaver installation never goes past about 20% of the installation.
I've tried 6 times: closing & re-opening Adobe Application Manager, re-downloading, using Creative Suite Cleaner Tool, trying to install Trial version, etc.
Maybe these Log entries make sense to someone:
The log is show's these 3 lines repeating over & over endlessly (for over an hour yesterday).
5/12/2012 20:49:57.344 [INFO] DLM.ApplicationFacade sendNotification = handleNativeDataSignal, type = null
5/12/2012 20:49:57.345 [INFO] DLM.ApplicationFacade sendNotification = handleNativeDataForCCMDownloadWorkflowSignal, type = null
5/12/2012 20:49:57.346 [INFO] DLM.ApplicationFacade sendNotification = installProgressSignal, type = null
Prior to that code repetitions, there are other repitions in the log--preceded by:
5/12/2012 19:47:35 [INFO] Utilities - File does not exist
Any advice appreciated. Thanks.
Any suggestions about what I should try next to get Dreamweaver to install? How long should the installation take--that is, how long should I wait before concluding that the installation is stuck again?

SOLVED.
I discovered that in Program Files/Adobe there was an old "Adobe Help" folder from some previous Adobe Trial install, never activated. All the folder contents had a 2011 date--so that must have have stalled the new installation. I deleted it, and Voila!
I can't delete the original posting.

Similar Messages

Win 7 won't boot after successful (?) install

Hi Group,
Tried searching the forums for this problem and found similar postings but I think my problem is different...
I've successfuly installed Win 7 Ultimate x86 in that I get to the point of entering product key, etc. but when it does the final reboot I just get a blank screen with a blinking cursor. Tried some of the workarounds like clearing the pram/smc, deleting the ati driver .sys file (which doesn't seem to exist actually) and also using the driver autounattend from the usb drive. I'm running the latest version of boot camp.
Not sure what to try next. I've been successful installing this version of windows in VMWare and on a fujitsu-siemens laptop without any issues. I've also been successful at installing Xp via bootcamp. Really at a loss as to what to try next. Any help would be greatly appreciated.
Cheers,
Jeff

*Take an iMac and Windows 7 Blue screen fun*
the final part of the Win 7 install and Mr Blue screen due to the Nividia driver supplied on Win 7 DVD kills iMac GT7300
1. Install... and Blue screen!
2.Re-boot but from the Win 7 install disk – seems to work if you hold alt on boot up and select the disk to boot from!
3.When you get into the Windows installer, click past the language selection. Then click "Repair your computer".
4.Windows will scan for installations and prompt you with a list. Select your "C" drive and click Next.
5.You should be presented with a windows titled *System Recovery Options*.
At the bottom of this list you should see +Command Prompt+.
Select the command prompt.
6.When the console opens, you can delete the offending driver using the following command:
DEL C:\WINDOWS\SYSTEM32\DRIVERS\NVLDDMKM.SYS
7.Close the command prompt window and click the Restart button.
This time, boot from your hard disk.
You will complete the install with no Blue screen.
Having done this go to the Nivida web site and download the GT 7 series drivers for Windows 7.
Install, re-boot and ...
+*... install Bootcamp drivers and right off your back to Blue Screen...*+
Repeat 1-7 and install newly downloaded drivers and off you go
http://geekswithblogs.net/ajames/archive/2009/08/12/take-an-imac-and-windows-7-r tm-ndash-and-have.aspx

CF Mx6 admin & service wont start after successful new install on XP with IIS

I just installed a fresh copy of Coldfusion mx 6 on my
windows XP running IIS . After installation, the CF Administrator
didnt come up(
Http://Localhost:8500/CFDIE/Adminstartor.....whatever)-
loads on the browser but doesnt load the admin page.
Further attempts to manually restart the coldfusion server
from Control Panel>Adminstrative tools>services> prooved
abortive as it refused to start.
Please can anyone help me out there?
What aint I doing right?

thanks for reply
but my firewall is not on and the coldfusion server service
aint starting whiles the other two services(ODBC etc) are running
smooth.
cant afford to mess up my internet connection settings cos
it would warrant paying a visit to my ISP office with my PC . its a
mobile CDMA wireless box.
pls help or i ll drop CFM for PHP
chow

Why won't Dreamweaver code view allow me to select from all of my system fonts?

I am trying to change the font for my code view in Dreamweaver CC. However, it does not let me choose from a list of all fonts installed on my computer...it just gives me about 50 or so random fonts (some of them glyph fonts which are completely useless in this scenario). It doesn't even include basics like Courier. I had previously been using CS4, and it allowed me to choose any font I wanted. Any ideas?

I've just checked Dreamweaver CC on my MacBook Air. I don't know whether it lists every single font on my machine, but the list was very long. It certainly wasn't just a short, random list. Are you trying to change the Code view font in the right place?
Dreamweaver > Preferences > Fonts

Install Adobe Flash Player popup after "successful" distributed install

I am getting this popup on pages using
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab" width="1" height="1" id="SOredirect" align="middle" SWLIVECONNECT="true">
How to fix this?

Hi, thanks for the screenshot!! That is helpful since I now see "Privilege Manager Active X Installer" There are several different companies that have this software. Here is what I read from one site and I'm sure they all work the same way.
The idea is to allow end users to have "certain" approved Installation privileges at the Desktop.
Privilege Manager solves this dilemma by allowing network administrators to attach permission levels to Windows applications and processes.
This tells me that the "Network Administrators" are the ones that attach the permission levels. I am not sure on this, but the fact that you received that Security Warning seems to indicate that this Installing of Flash Player(which is Installing an ActiveX Control) has not been approved. I wouldn't see the need for the warning, otherwise.
I would check with your Systems Administrator and see if this is the case.
Now here is what I want to clear up. Have you placed the most current Flash Player Uninstaller on your Desktop?
Have you downloaded and SAVED the Flash Player Installer on your Desktop?
Have you then Closed all browsers and run the Uninstaller/Installer?
That to me would be the best procedure. You should not receive that warning in my opinion if your Sys. Admin. has approved Adobe Systems Inc and or Adobe Flash Player.
Let me know,
Thanks,
eidnolb

Why won't Dreamweaver CC open proto files, while Dreamweaver CS6 does

I just found out that Dreamweaver CC gives an error when trying to open an Adobe Proto file: "error extracting the proto file".
That's weird, because Dreamweaver CC uses the same plugin/extension as Dreamweaver CS6 does, or am I missing something here...
Opening the same proto file in Dreamweaver CS6 works without problems.
Does anyone know how to solve this issue?

This is annoying but i was able to open it on my mac os x laptop using the following steps:
Copy the .pro file to a location on your computer and change the file extension to .zip
Using Terminal i was able to use the following command (the default unzip application could not unzip it for some reason) in the command prompt: unzip file.pro.zip
In the Renditions folder that gets unzipped you will find an html.zip (actual filename) file.
Unzip html.zip (the normal unzip application works on this file)
Set the local site directory to the extracted html directory. You can then edit the site using DreamWeaver CC.
i hope this helps.
Regards,
jason

Lightroom 5.2 won't open after "successfully installed" - can anybody please help me understand why?

Hi everyone
I've bought and downloaded Adobe Lightroom 5 for a new iMac 27" intel core 5 3,4 GHz. The machine is only three days old and no more updates are to be found when searching for it. However; after the message that "lightroom 5 has successfully been installed" I don't get to open the program. So I never get to the point where I can register the serial number / registration key for purchased product.
I've followed the instructions that comes with Lightroom 5, but no luck. Also tried to uninstall and reinstall.
No secret that I'm total incompetent when it comes to understanding of computers and software....
Hope someone can help me understand what I'm doing wrong, and sugest some good solutions :-)
Thx

I think you may need to uninstall and then start over. There is no installer on the Mac for Lightroom so select it in Applications and send it to the trash. I suggest you download again from a different source. You can use the link below to download the free trial and then validate the software after installation with your product serial number. Ensure you choose your language version and MAC platform from the dropdown list at the top of the page.
After you click download it starts by downloading or updating (replace) the Adobe Download Assistant. You then browse the products and select Photoshop Lightroom 5 to start the installation.
https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=D TEML

Why won't Photoshop CC run on my laptop I just installed it today

Why won't Photoshop CC run on my laptop I just installed it today. I signed out on my desktop but the laptop still will not run Photoshop CC. It starts but then closes itself down immediately after starting.

Well it is the same Win7 that is running on my desktop and yes I have an internet connection and at that time is was hard wired not wireless. I just downloaded and installed the Photoshop and Bridge Apps. The laptop is about 2 yrs old and it is a high end machine and Photoshop6 runs on it just fine. I sure wish someone from Adobe would answer this question as it is beyond frustrating to me that this stuff works so poorly and you can never get a good answer out of them about anything ever.

Why won't my Mac Pro sleep after Lion is installed?

Why won't my Mac Pro sleep after Lion is installed?

Tell us, what hardware add ons?
old software? that required PowerPC/Rosetta maybe.
Look for any apps, process that used powerpc and look for updates, check out RoaringApps for a table of Lion compatible programs
does it happen iwth a clean install?
how about if you do a Safe Boot?

Why won't my iphone 4s update apps after installing 1.6?

Why won't my iphone 4s update after installing 1.6?

Are you on wifi or 3G ? If 3G try wifi as I received this message earlier that might suggest there is a problem with apple... Again

Why won't iTunes 10.6.3 work after installing Mountain Lion?

Why won't iTunes 10.6.3 work after installing Mountain Lion?

Instead of downloading from Apple updates on my computer, I went to apple.com, loaded it from there and the update worked fine.

Why won't iPhoto download after i have bought it from the app store and installed mavericks

why won't iPhoto download after i have bought it from the app store and installed mavericks?

Sorry no mind readers here so you have to tell us details, context and any error messages - just stating an abstract problem that could have thousands of causes is not enough
What version of iPhoto? Of the OS? what has changed since it worked? How are you trying to open it (clicking on the icon in the Dock, double clicking on the application in the applications folder, ???)?
Anything else you can tell a total stranger who can not see you or your computer to let them assist you?
LN

Why won't Windows XP automatic updates work after installing new ITunes

After installing the new 11.1 Itunes, Windows automatic updates fail to install any new updates.
The last time this happened was when I last updated Itunes. I can't remember how I fixed it but I had to go into the apple software and fix something.
Please help!

Please help me ! I don't understand why I had to restore to factory settings and then when I tried to re-sync it kept telling me iTunes is not working. Why ??

Why won't my Photoshop Elements 11 install?

After entering the Serial # and my Adobe ID, I get to the Options tab on the installation. There is a grey checkmark next to Adobe Photoshop Element... which I can't click, I also can't click on All Components at the top, but, I can choose the Location: /Applications. When I click the Install Button, nothing happens.
I am on a Mac Mini 2.3 GHz Core i5 with 8 GB Memory running OS X 10.8.2 and 240 GB available on the HD

Hi,
1. Since PSE is the only application to install on this install options screen, the check-box would always come checked & a user can not uncheck it
2. All components comes as unchecked and greyed out since there are no optional STIs available for a user to check/uncheck, so, this is expected. Please do not worry about these two points.
3. Nothing happens on clicking on install - this is strange. After clicking on install, you should be shown a native/os dialogue, asking for your machine password, after which the installation would start. You might like to restart your system just to be sure that the machine hasn't gone into a bad state.
Then try installing once again please; you may just choose to install in trial (just for the time being) & choose to skip adobe id - all of it has no impact on the application installation as such but it is just to save your time while you try installing again.
Navigate to install options screen and click Install. Once the application is installed, you may please enter your serial key on its launch.
Incase, you still face issue, please share the following logs here & we shall troubleshoot the issue asap:
/tmp/amt3.log, oobelib.log
~/Library/Logs/PDApp.log
/Library/Logs/Adobe/Installers/<Adobe*>.gz
I hope this information helps.
thanks.

Why won't my images open in photoshop?

I just upgraded from Lr3 to Lr5 and from PsCS5 to PsCS6. Yesterday (directly after upgrading Ps,) I was able to open images from Lightroom into CS6 by selecting and using cmd E shortcut. Later on last night, and today, I can't get anything to open in photoshop from lightroom. Ps launches, but nothing ever opens. I don't get any error messages or any other clue as to why the images are not loadiing. What happened and how do I fix it? I have a whole wedding to edit, and I can't get any images to open in ps. I am running Mountain Lion OS X 10..4 on a MacBook Pro. Any help would be greatly appreciated!

I have been having the same issue. Win7 OS - CntrlE or selecting "Edit in.." will open CCPhotoshop2014, but image will not load. As others have found, I can open the image I want directly in Photoshop using "Open" command, but no LR changes accompany the file. I attempted to delete both CCPhotoshop and CCPhotoshop2014 preferences file found in User AppData file but no success. I have had CS6 Photoshop loaded in the past, but removed it some time ago. I had uninstalled CCPhotoshop after I installed CCPhotoshop2014.
My Lightroom installation is original stand-alone. I have no other Adobe products, just CCPhotoshop2014.
I did update Lightroom from 5.4 to 5.5 before I installed Photoshop CC2014. I could not say if Lightroom 5.5 had any issue opening in PhotoshopCC as I did not try it before I updated to PhotoshopCC 2014. I do know that in "Preferences - external editor" PhotoshopCC2014 was listed in my LR5.5 preferences, as I checked that.
I used Windows control panel to uninstall PhotoshopCC2014, checking the "remove preferences" option. I then rebooted and reinstalled PhotoshopCC2014.
Success! Lightroom now will allow me to open a file in Photoshop, using the CntrlE command.

Why, after successful Photoshop install, why won't Dreamweaver & others install?

Similar Messages

Maybe you are looking for