Why after upgrade to lion, there is no built in FaceTime?

After i upgrade to lion, i found that there is no built in FaceTime?

FYI, the version that was installed on the machines I upgraded to Lion is 1.1

Similar Messages

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours. Help!

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
I tried quitting and starting again but it just jumps back to the same spot.

It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
(I was unable to seach properly before which is why I posted the question - it was a bit of a panic)

Is there a way to retrieve ms word docs after upgrading to lion

Is there a way to retrieve ms words docs after upgrading to lion?

memph wrote:
Is there a way to retrieve ms words docs after upgrading to lion?
Upgrade MS Office to 2011, or use Apple iWorks, available from the App Store or use the free OpenOffice or LibreOffice. Plenty of choices, just no longer MS Office 2004.
Pete

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

First, back up all data immediately, as your boot drive may be failing.
Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

Why can't I use my Photoshop or AppleWorks after upgrade to Lion?

Why can't I use my Photoshop or AppleWorks after upgrade to Lion?

PowerPC apps and the Rosetta software are no longer supported.
Here is a remnant of what was
http://www.apple.com/asia/rosetta/

After upgrading to lion 10.7 I can no longer use my canoscan 9950f, why?

After upgrading to lion 10.7 my canoscan 9950f scanner is no longer recognized. Have I lost thye use of this scanner by going to 10.7?

Not likely. Make sure the scanner is still available in System Preferences > Print & Scan. You might have to delete the old scanner and add it again if your computer cannot "find" it.
Before you do that, and while you are in Print & Scan, see if you can get it to scan by selecting the Scan tab.
In Lion, all scanning functions have been relegated to Preview, the Print & Scan preference pane, and Image Capture.

After upgrading to Lion, the Finder will increase the virtual memory while using external HD

after upgrading to Lion, the Finder will increase the "virtual memory size" while using external HD. I check it using Activity Monitor and found that "Finder" wll increase the "Virtual Memory Size" and "Private Memory Size". and then after a while. the system told me my HD is full and hanging there.
My External HD is 1TB. and I have installed new version Paragon NTFS for Mac V.9.01. I am not sure it is related or not.
but I attached my external HD. the "Finder" will start to increase the "Virtual Memory Size".
please help out this case and solve this issue.
thank you !!!

The one has nothing to do with the other. Virtual memory size and Private memory size are used by developers to analyze their software. it has nothing to do with anything related to the user.

I can't hear sound after upgrading to lion

I have this little annoying problem with my iMac after upgrading to Lion OSX. After waking up my iMac I can't hear any sound from internal speakers, ie: only video on Youtube, but no sound, but whilst pressing volume up/down button I can hear beep. When it happens So I have to restart system everytime it happens. Anyone any ideas or maybe someone out there has the same problem?

I'he double checked everything, only 1 output device (internal speakers). As I said before, it is weird because I can play iTunes and can hear "beep", but neither youtube sound, nor game sound or internet radio seems to be working, no sound whatsoever. But this time system didn't go to sleep, it has just happened suddenly.... Restart again then!

After upgrading to lion Time Capsule is solid yellow

Hi
After upgrading to lion I am experiencing a lot of problems with time caspule
1. backup fail: it starts and than fails (error message and yellow warning triangle)
2. unable to connect to TC disk, neither from airport utility, nor from Finder
3. Airport Utility hangs while trying to manually modify configuration (rainbow weel).
After a lot of reboot, reset, disk rename, time capsule reconfiguration etc etc AND TC DISK REINITIALIZATION (ALLA BACKUP LOST!)
now backup seems to work and I can browse files in Time Machine
BUT
Time Capsule is a steady YELLOW and Airport utility says there is an error on disk (The disk is not working)
Can somebody help me.
This all happened after Lion installation. Not a problem before
Franco

Hi William
The disk is the internal Time Capsule Disk. It's a 1Tb model.
My iMac is localized in Italian
So I write here the Italian message and a possible translation
The first error message I get opening Airport Utility is:
Utility Airport ha trovato una Time Capsule 802.11n (2.a generazione) che segnala problemi
(AirPort Utility has found a Time Capsule 802.11n (2nd generation), which indicates problems)
If I press on "Continue" I enter a page that says
"Problema 1 di 1: Il disco Time Capsule non funziona"
(Problem 1 of 1: The Time Capsule Disk doesn't work)
"Si è verificato un problema con il Disco Time Capsule. Collega un disco rigido USB al tuo disco Time Capsule e utilizza il pannello Dischi di Utility Airport per archiviare i dati ed eseguire il backup."
(There was a problem with the Time Capsule disk. Connect a USB hard drive to your Time Capsule disk and use Disk Utility Airport panel to store data and run the backup.)
While if I go to the manual settings and I select the disk,
on the disk data info I have
Stato S.M.A.R.T.: Non funziona
(S.M.A.R.T status: Not working)
As I said before, apart from that problem, everything else (time machine, backups and file recovery) looks working good (until proven otherwise eh eh)
I don't know if to worry about the disk but I find suspicious that everything just started after Lion installation.
I called the call center and they just said to return the TC for disk repair (have to pay, warranty expired).
I told them about Lion installation fact and they said it looks like a coincidence but actually it is likely that after a disk initialization or a big amount of data writing the TC disk may break (WHAT ?!?) and the Apple guy even suggested me to buy an external disk that is less expensive and give less problem than a TC !!!!
(I can agree on that now, but I was surprised to hear that from them )
Thank you very much for any help.
I hope this info helps
Franco Andrea

After upgrading to Lion Time Capsule solid yellow

Hi
After upgrading to lion I am experiencing a lot of problems with time caspule
1. backup fail: it starts and than fails (error message and yellow warning triangle)
2. unable to connect to TC disk, neither from airport utility, nor from Finder
3. Airport Utility hangs while trying to manually modify configuration (rainbow weel).
After a lot of reboot, reset, disk rename, time capsule reconfiguration etc etc AND TC DISK REINITIALIZATION (ALLA BACKUP LOST!)
now backup seems to work and I can browse files in Time Machine
BUT
Time Capsule is a steady YELLOW and Airport utility says there is an error on disk (The disk is not working)
Can somebody help me.
This all happened after Lion installation. Not a problem before
Franco

Hi William
The disk is the internal Time Capsule Disk. It's a 1Tb model.
My iMac is localized in Italian
So I write here the Italian message and a possible translation
The first error message I get opening Airport Utility is:
Utility Airport ha trovato una Time Capsule 802.11n (2.a generazione) che segnala problemi
(AirPort Utility has found a Time Capsule 802.11n (2nd generation), which indicates problems)
If I press on "Continue" I enter a page that says
"Problema 1 di 1: Il disco Time Capsule non funziona"
(Problem 1 of 1: The Time Capsule Disk doesn't work)
"Si è verificato un problema con il Disco Time Capsule. Collega un disco rigido USB al tuo disco Time Capsule e utilizza il pannello Dischi di Utility Airport per archiviare i dati ed eseguire il backup."
(There was a problem with the Time Capsule disk. Connect a USB hard drive to your Time Capsule disk and use Disk Utility Airport panel to store data and run the backup.)
While if I go to the manual settings and I select the disk,
on the disk data info I have
Stato S.M.A.R.T.: Non funziona
(S.M.A.R.T status: Not working)
As I said before, apart from that problem, everything else (time machine, backups and file recovery) looks working good (until proven otherwise eh eh)
I don't know if to worry about the disk but I find suspicious that everything just started after Lion installation.
I called the call center and they just said to return the TC for disk repair (have to pay, warranty expired).
I told them about Lion installation fact and they said it looks like a coincidence but actually it is likely that after a disk initialization or a big amount of data writing the TC disk may break (WHAT ?!?) and the Apple guy even suggested me to buy an external disk that is less expensive and give less problem than a TC !!!!
(I can agree on that now, but I was surprised to hear that from them )
Thank you very much for any help.
I hope this info helps
Franco Andrea

After upgrading to lion starting up is taking much more time ??

After upgrading to lion starting up is taking much more time is there any solution to this ?
i do all things about cleaning disk permission or editing .

Have you check what is being started at the same time?
Lion will start more applications then were being started in the past.
Allan

After upgrading to lion my internet usb key is not able to connect anymore.can anybody help me?

after upgrading to lion my internet usb key is not able to connect anymore.can anybody help me?

If there are no restrictions engaged and you are not receiving any Error messages or Alerts...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

After upgrading to Lion, my Canon 7d can not be found.

After upgrading to Lion, my Canon 7d can not be found. I have used the USB connection to connect to my camera for several years with no problems, until now. I have reset the SMC, by powering off the computer and unplugging everything for approx 30 minutes. There are no new drivers available and any assistance will be appreciated.

I was having the same issue after upgrading to Lion OSX. I searched the web and found many people had the same problem but no solution so...
I called Canon and they told me to run 'Image Capture' its part of the Canon Software Suite so you should have it and then try downloading the pictures like you usually do. I use 'Image Browser' and with 'Image Capture' running in the background it works perfectly now.
Hope this helps!!

After upgrading to Lion Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

After upgrading to lion, cant use TM

After upgrading to lion, I can't see any TM backups, and I do not have access to this external harddrive.
In the TM backup, I can see all backups, but cant activate or use them.
When I click to the external HD, an error message says: "The folder "" cannot be opend, because you do not have permission..."
I tried to solve problem as Apple given on website, but didnot help.
Thanks for help!

I had this same problem after I copied my TM backups from a 500GB TC to a larger external USB drive.
After some work, I finally was able to get the backups from the old TC to show up (in pink) on the new external drive, but still was unable to select/use the backups in pink.
After readings lots of the pondini posts, I saw some things that seem to get me access to the pink timeline items.
First, I read this post. At the beginning of it, it read...
Time Machine keeps the backups for each Mac separate, and normally only shows the ones for the Mac it's running on, even if there are other Macs' backups on the same disk/partition.
Also, sometimes Time Machine will start a new "sequence" of backups, as if they were from a different Mac.
To see these "other" backups, you need the Browse Other Backup Disks or (Browse Other Time Machine Disks) option. It's available by Alt/Option-clicking the Time Machine icon in your Menubar, or by right-clicking the Time Machine icon in your Dock.
At the end of the post (scroll to the blue box at the bottom), this also gave me an strategy...
If you've moved from a network location to local, Time Machine will usually continue backing up to the sparse bundle. But when you
Enter Time Machine, it will be looking for local backups. You'll have to manually mount the sparse bundle by double-clicking it in the Finder before entering Time Machine, and may need the Browse ... option.
These ideas helped me, as I am now able to access the pink backups in the timeline.

Why after upgrade to lion, there is no built in FaceTime?

Similar Messages

Maybe you are looking for