Why AirPrint is not working on my ipad4 after updating to IOS 8.1?

WWhy AirPrint is still not working on my ipad4 after updating to IOS 8.1

Hello mmpreston,
Thanks for using Apple Support Communities.
To troubleshoot issues with AirPrint on your iPad please follow the directions outlined below.
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
About AirPrint
Take care,
Alex H.

Similar Messages

  • Safari not work for iPad mini after updated to ios 6.1.3

    After updated to ios 6.1.3, Safari just not response. I cannot input any web address. Do anyone has this problem? Do anyone know how to solve it?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Itunes Match not working on Iphone 4 after update to IOS 5.1

    Hello,
    Itunes Match has never been an issue for me in the past.  After I updated to IOS 5.1, I accessed my music app and noticed that Itunes Match was only showing artists that started with the letter "A" And "B".  So I turned match off, turned it back on and now itunes match shows a picture of a cloud and a progress bar.  the bar takes hours to move about half way, and then the app will just tell me that I don't have any music and I can dowloand music from itunes. 
    My wife is not having any issues with match on her iphone 4 and my ipad 2 running IOS 5.1 is also not having any issues.
    I have tried signing in and out of the Itunes store, turning on and off Itunes match, doing a hard reboot of the phone, I have rest and deleted everything on my phone and restored from a icloud back up.  I even tried to see if I could delete the music app data by going under settings/general/usage.....but the music app says it has "no data".
    This is Very frustrating for me, and I can't figure out what i can do to make my phone load my music match library again.  I thank you for any suggestions/help that you may have in advance!

    Exactly the same ting has happened to me over te past few days with my ipad2... I too resorted to setting my ipad2 up as a new device again to get match working... There is definitely something screwy happening on 5.1 I think... It was fine till I updated

  • My auto location service is not working on iphone 4s after updating to ios 8.1.3

    Hi every one
    i have recently facing a problem my compass and other apps which require location service are not working on my Iphone 4s, after i have upgrade my iphone ios to 8.1.3. Settings are correct i.e. location service is 'ON' and apps require location service are allowed to use my location.
    is anyone facing the same issue. Need your valuable suggestions and advices.
    Regards
    Muhammad Shahbaz
    Pakistan

    Greetings Biyase, 
    Thanks for contributing to the Apple Support Communities. 
    It sounds like the Outlook app is not launching after you updated iOS. In this case, I recommend the troubleshooting steps found at this link:
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Sincerely,
    Jeremy 

  • Receiver (ear speaker) not working on iPhone 5 after updating to iOS 7

    Since upgrading to iOS 7 (or 7.0.2) the receiver on my iPhone seems to have stopped working.
    I don't make / receive many voice calls - so not sure exactly when problem started.
    Every call I have received in the last 2 days has been silent, where the person calling me can hear my voice, but I cannot hear them.
    Also there is no sound when I make a call.
    Prior to this most recent calls have been silent at first, with the sound only kicking in after 5-10 seconds.
    I can turn speakerphone on - which works.
    I have performed the folowing to try to fix the problem:
    1) Restarted phone
    2) Reset all settings
    3) Restored from backup
    I've checked mute switch, tried volume buttons and ensured airplay is set to iPhone.
    I managed to make the receiver work again by wiping all settings and content, then setting up as a new phone.
    However I do not want to lose all the content, settings, app data saved on my phone, so this is not really an option.

    Yes I have done this 4 times, I am sorry I should've been more clear in the information I provided but thanks for replying

  • Why has Siri stopped working on iPhone 4 after upgrading to IOS 5?

    Why has Siri stopped working on iPhone 4 after upgrading to IOS 5? I've tried the disable and reboot but continue to get the network error.

    Apple has not been forthcoming on the explanation. My Siri worked on my iphone4 (not 4s) immediately after upgrading to IOS5, but I take it they have redirected the servers that used to support Siri to only work with Iphone4s.
    It is one thing for apple to only bundle the improved Siri with IPhone 4S, or  for them to remove Siri from the Ap store.
    But it is another thing all together for apple to purchase a company, and then cease the service that many of us paid for.
    Attempts to contact apple at apple store and via email have been unhelpful.
    Apple Fan--

  • Outgoing calls not working on iphone 4S after upgrading to ios 6.0.1

    outgoing calls not working on iphone 4S after upgrading to ios 6.0.1.
    It always says call back ...
    incoming is working
    i tried number of sim cards from different networks but same issue
    tries resetting network settings but it also didnt worked

    Just counter-check the following settings.
    1. Settings>General>Set Side Swith To: Rotation Lock
    2. Make sure side switch is not in lock position
    3. If necessary do a reset a few more times

  • My iPhone 5 suddenly could not hop onto LTE anymore, after updating to IOS 6.1

    My iPhone 5 suddenly could not hop onto LTE anymore, after updating to IOS 6.1. I know there is LTE coverage at my house, since before I updated it, it could hop on to LTE just fine, in the same location. My Carrier is CSL Hong Kong. Does anyone have this problem? If so, does anyone have a answer to it?

    Hi AEEA-Family,
    I also did the update this morning and had the same problem also on Vodacom. The whole morning after the update I have No Signal, turning the phone on and of gives you signal for a couple of minutes then it drops again to no signal.
    I've just made the following changes on my Phone and all seems ok again.
    Here are the steps I took to resolve it on my phone.
    1. Go to "Settings" > "Carrier" > Turn off "Automatic", wait for list of Carriers and select "Vodacom-SA"
    2. Go to "Settings" > "General" > "Cellular" > Turn off "Enable LTE"
    3. Go to "Settings" > "General" > "Cellular" > "Cellular Data Networks". Then Change EVERY APN from lte.vodacom.za to internet
    After I made all those changes I did a hard restart of the phone and now all seems fine.
    I suspect the update this morning Enabled all Vodacom's LTE settings, yet Vodacom is not 100% LTE yet in our areas and this is causing the problem.
    Hope this helps other people.

  • Why itunes failed to install apps on iphone after update to ios 6.0.1? And how to restore my purshased apps from itunes?

    Why itunes failed to install apps on iphone after update to ios 6.0.1? And how to restore my purshased apps from itunes?

    See:
    Frequently asked questions about viewing and syncing video with iTunes and iPod
    Why can't I transfer videos to my iPod?
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod

  • TS1363 i could not activate my iphone 3G after updating to ios 6.0.1

    i could not activate my iphone 3G after updating to ios 6.0.1

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    If the iPhone was advertised as unlocked and you are still within
    the return period, start a claim with eBay to get your money back.
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>
    About=>Carrier?

  • Anyone not get the camera shortcut after updating to ios 5?

    anyone not get the camera shortcut after updating to ios 5?

    Tried double pressing the home button when on lock screen?

  • Email not cc'ing, Email not cc'ing or fwding after update to ios 7.0.6

    Email not fwding or cc'ing after update to ios 7.0.6 but able to send and receive just fine. Anyone have any solutions?

      I'm sorry if I sound intrusive, but did you even read my question? I did not mention the speaker or the microphone at all but yes I tested them anyways. When I said I tested and replaced them, I was talking about the two previous parts I had mentioned, the dock, and the headset jack because the device is acting as if it is docked on something like an iHome, or plugged into a headset. But FYI, I did also test the speaker and it was the correct putting out the correct ohms and voltage, that is not the issue. Especially since I have sound sometimes and there are no loose connections in the phone. Like I said, I don't plan on going to apple at all as they will not help me with a software issue. And furthermore I mentioned jailbreaking because I know how to do it. I've done it before, I've done it for friends. Did not say that this phone was jailbroken. I didn't think I could have been anymore clearer on the issues I was having and steps I've taken to try and resolve this problem but thanks for your help anyway's.

  • Wifi doesnt work on iphone 4s after updating to ios 8.02. How do i fix this?

    The wifi doesn't work on my iphone 4s after updating to ios 8.02. How do i fix this?

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting.
    If this did not work, and to rule out a software issue, setting it up as new device would be the next step:
    iOS: How to back up your data and set up your device as a new device
    If still no luck, this might be a hardware problem and the phone has to be checked by an Authorized Apple Service Provider or Apple:
    iPhone - Contact Support - Apple Support

  • Airprint not working with HP printer after updating to IOS5

    Hi,
    I have an HP airprint printer (photosmart B210) that worked fine with my ipad2 and iphone 4 all running ios 4.
    Now I have a iphone 4s as well as the iphone 4 and ipad. After upgrading to ios 5, I can no longer airprint from any of my ios devices.
    I have tried turing everything off anf back on (including time capsule router, printer, ios devices).
    I can see the printer from ios but the job just sits waiting to print. I have managed to print one document after trying multiple times.
    Anyone having this issue?
    Thanks

    BattleAngelita,
    Welcome to the HP Forum.
    The fact that the SimplePass program is asking your for your Master Windows Password means the program survived the upgrade process to Windows 8.1 -- sort of.
    You may want to start with the following:
    Create a Restore Point >>  Create a Restore Point – Win7  OR  Create a restore point Win8
    Close all your programs and Shut down the computer
    Disconnect everything (little Unifier for the keyboard / external mouse can stay)
    Perform the Hard Reset for your notebook
    Boot the computer and log in
    Check to see is SimplePass has sorted itself.
    ==================================================​========================
    You may want to try to Update your SimplePass program to the latest version in the version 6.x series.
    Before you do that, read and follow the instructions to Export your Webcards to your .tsd file.  Regardless of whether the website logins are working right now; you do need this backup in case you lose your HP SimplePass program (through complete removal / reinstallation or though corruption).
    Next, consider updating the HP SimplePass program to the latest of the version 6 series.  If you are already running the latest version, consider the other options in the guide, including the "Repair SimplePass" procedure.
    Open the file > Click on Download > Click “Open in Adobe Reader”
    Simple Instructions to Upgrade HP SimplePass
    Click the Kudos Thumbs-Up!
    It is a nice way to say “Thank You" for the help.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Icloud mail does not work over cellular network after upgrade to IOS 8.1.3

    Hi,
    Since I did the update to IOS 8.1.3 on my iPhone 6 Plus yesterday, my icloud mails cannot be received/sent with my phone over the cellular network.
    In order to make mails workin' I need to be connected to a Wifi network.
    All setting are correct on the phone.
    How can I fix this **** issue.
    Deleted the icloud account already and added it again but that does not help.
    Also when I try to connect  to iCloud from the iCloud settings it says: Authentication Failed - A server error occurred.
    The password is correct.
    Please help me.
    Jerry

    I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

Maybe you are looking for

  • How can I combine existing PDF files?

    I ordered Adobe Pro because I have a whole bunch of PDF files I would like to combine.

  • How do i get my apps onto my new imac?

    I have 40-50 apps on my iphone and ipad2. how do i get these apps onto my newly purchased 27" IMAC?

  • "Cost" column of the VF03

    Hi, Can anybody explain where the "cost" column of the VF03 screen come from (from the material master, condition records or sales document's conditions...)? Thanks in advance?

  • AD account won't unlock - need to wait 24 hours?

    you can search the logs of the DC that's locking the account for error 4740 to find what machine is causing the lockout (in the error text). then you can at least look at that PC/server and see if something is running under that account to cause the

  • Order BOM Maitainence CS62

    Hello, I am using CSAP_ORDER_BOM_MAINTAIN to change a specific field of an Item in Order BOM , by giving FL_NEW_ITEM = SPACE as export ofcourse along with other requried paramters .....but the field in the BOM s not getting changed . When i tried wit